Trouble opening Elements 10- missing file

Until yesterday Elements 10 worked fine. I now get an error message" This program can't start because MSVCP110.dll is missing from your computer.." It takes 12-14 times hitting "OK" to get the message to close and Elements to open AND all my NIK plugins are gone.

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 10:
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

Similar Messages

  • Have tried to open my itunes and the message given states that itunes can not be opened due to missing files.  Please reinstall itunes. Repeated attempts to reinstall give the same result...any ideas?

    Have tried to open my existing itunes but it states that it can not be opened due to missing files...please reinstall itunes. Repeated attempts to reinstall are to no avail....any ideas?

    I assume you are talking about iTunes on your computer, if so, you will have to remove all Apple programs associated with iTunes:
        iTunes,  QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support (iTunes 9 or later)
    Make sure everything that is by Apple is removed including Safari. You can sort by "Publisher", when you uninstall programs.  Make sure you have at least one other web browser (like Firefox or Internet Explorer) before removing Safari. That way you can go back to the Apple web site and redownload iTunes later.
    Reboot the computer then reinstall iTunes.  Everything should work normally.

  • Error message that it cant be opened because of missing files.

    I am trying to download my Elements 12 and I keep getting a message that I can't open it because there are missing files. Any suggestions?

    From where are you downloading?
    Try here:
    Download Photoshop Elements products | 13, 12, 11, 10
    or here:
    Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools

  • Trouble opening "best quality" slideshow file ...

    I'm very confused. Most of my slideshows have been created with best performance selected in the prefs. I just made a show on my 12" Powerbook using best quality. When I tried to open its file again, I got a spinning beach and had to force quit. I then launched from an older show that had best performance selected and iDVD had no problem. I tried opening the best quality show again, and forget it. Beach ball time. I force quitted.
    After a couple more failed attempts to open that file, I repaired permissions and chucked out my preferences plist. I tried opening again and got a window saying my preferences for the file didn't match the default preference and did I want that changed, and I clicked okay, and got the spinning beach ball ... I force quitted, went back and this time when the window opened I selected a different option, which directed iDVD to update the show. Then the file opened. However, the file is now set for best performance, as that's the default.
    This has left me confused about a couple of things. (1) It seems the original setting for best quality threw off iDVD, but I'm not sure why. (2) The quality/performance setting is general, but shows are unique files. How is all this supposed to jibe in using files where some are set for best quality and others for best performance?
    Also, I set my preference for best quality right at the start of making that problematic slideshow file. This seemed more sensible than setting it before burning, as wouldn't background encoding be going on otherwise? And isn't the lack of that what makes the quality better later on? But perhaps that's what hung up iDVD? Like I said, I'm confused. I simply want to use best quality for a show and be able to get into the file again later on after closing it.
    Any suggestions? Or ideas why iDVD kept spinning out on that file? Sorry this is so long .......... Any help will be very appreciated.
    G5   Mac OS X (10.4.2)   Also G4 12" Powerbook, Mac OS X (10.4.6)

    Thanks for your response, but I'm not sure I
    understand. What does "best quality" actually mean,
    then?
    Without getting to bogged down in explainations - talking about single-layer discs - Best Peformance uses fixed bit-rate compression for content under 60 minutes. Best Quality uses on-pass variable bit-rate compression for content under 120 minutes. It generally happens that for content under 60 minutes Best Performance give better quality than Best Quality.
    Also, do you have any idea why a show done using the
    best quality pref would result in the application
    getting hung up?
    BTW, my file is just a wee slideshow of 98 jpgs.
    About 12 minutes long.
    It MIGHT have been the presence of already encoded assets from Best Performance. (Best Performance can do background encoding because it uses a fixed bit-rate - Best Quality CAN'T do background encoding because the encoding bit-rate isn't set until all the content has been added.)
    F Shippey

  • I am having trouble opening a large Excel file (xlsx) on my iPad3

    Do I need to purchase an app to be able to open this large Excel file?

    Of course. No computer will open a file without an appropriate program to do so.  Search the App Store for "spreadsheets" to get an idea of what software is available. Aples own "Numbers" might be considered, or "QuickOffice" or several others,

  • Trouble Opening Elements Video in Quicktime

    I am having trouble with saving my elements video to be viewed in Quicktime. I can save it fine, but when it iopens in
    Quicktime the video is out of sync a little with the audio.
    I am taking video classes and it is required to be able to open them in Quicktime. I almost tend to think it is a compression issue of some sort,
    but from what I understand they should be compatible.
    Any ideas...........anyone???
    Jennie

    Jennie,
    Going back to the source footage, do you know the details of those files?
    If necessary, you can use the great, free utility, G-SPOT to gather all of the details. G-Spot will give you details about both the Video and the Audio in those files. As you really have two sources, I'd run each type (the stock) and the other student's files through G-Spot and post a screen-cap of the program's screen, so that we can see those details. There might well be something there, that will point to the issue.
    Also, when you start a Project, you are prompted to define a New Project. What are the specs. of that Project? The settings in the Project should match the specs. of the source footage 100%, or one will have issues.
    Now, back in that Project, in PrE, when you play the Timeline, I assume that you have the full Audio, which is in sync. Is that correct?
    I notice that the FPS = 15. Going back to the source footage, does that match the FPS of that source footage? Above, I suggest how to find out those details. If this does not match the FPS of the source footage, is there a compelling reason to alter this?
    I understand outputting (Export/Share) to a different Frame Size (so long as it is the same Aspect Ratio), and that should not be part of the issue.
    Last, some users (PrE and PrPro) have had issues with Apple's H.264 CODEC. That is probably the most common one, as it is installed with Apple's QT Player. As a bit of background, the CODEC is the device for both encoding and decoding AV files. For more background, this ARTICLE might be useful. There are a couple more, very popular H.264 CODEC's, that seem to give fewer problems, Lead and MainConcept.
    Good luck,
    Hunt

  • I tunes wont open because of missing files how do i fix this?, i tunes wont open because of missing files how do i fix this?

    every time i try to go onto itunes it says itunes cannot run because some of its required files are missing please reinstall itunes. and it wont let me do that either please help thank you

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • Trouble opening a managed project file on a PC

    Hi all!
    So I have encountered a really weird problem that's been driving me bonkers lately. I'm working on a comedy web series and have been getting managed timelines from the editor to do some adjustments, grading and sound with. The first episode went fine but for some reason the next two aren't relinking properly.
    They have to video tracks, one for DSLR footage and then a track above that has footage from a Atmos Ninja Blade that they've synced up. The blade footage doesn't relink on these new project files. They come into the timeline with the grey bars on them denoting missing frames or some such, but the clips are in the bins and the footage is there. It's like all the ins and outs are getting disregarded.
    Now, oddly enough, this only happens on my PC (my main station). It does NOT happen on my macbook pro. Everything relinks fine there.
    Can anyone shed some light on what's going on? I need to work on my main station but if I can avoid having to go in and reset each clip of Blade footage, I would LOVE that.
    Thanks!

    follow-up: I have seen tips online about making sure to move the "media" part of the project as well as the project itself. It's strange though: there is no "media" here! I go to the movies folder, and there's the little project icon, and no associated "media". I understand the point: you need the project and all of its components in order to open and work on the project, but with iMovie 7, where does the "media" go when the project is saved?? I'm desperate here.

  • Can't open several things - missing files?

    Hello - Have just read an article which said you shouldn't install new software if you already have problems and of course that is just what I have done! I have an Emac G4 10.39 1 GHz 256 MB SDRAM - no extra memory installed. I have a mouse, keyboard and modem 330 installed - ADSL Broadband - a scanner (not used recently) an HP Deskjet 5100 and now a new HP Photosmart D7360. I had been having problems with Classic and couldn't open it for a while. Then it reappeared but I couldn't save any Microsoft Word documents. I could create them and open old ones but not save.
    Before buying my Photosmart I installed Tiger. Safari, I Photo and I Tunes stopped working. I couldn't get onto the Internet even after reinstalling the Modem software. It turned out the Modem isn't compatible with 10.4 so I reinstalled the original software and updated until there weren't any more upgrades. I reinstalled ILife and the applications (except Safari) now work. (I don't care I've got Firefox.)
    I installed my new printer but the printer utility kept bouncing in and then out of the dock and then 'unexpectedly quitting'. I had other problems with the new printer which I had to take back and have replaced. I uninstalled the software and reinstalled with the new machine. I had the same problem but otherwise the printer is fine. I decided to try printing from different applications and successfully printed a few pictures from I Photo and from the Photosmart Print Application - all the time the Utility was bouncing out of sight and the error message was coming up. Then the printer stopped responding and I discovered I couldn't look at the print queue. I can't delete the name of the printer from the list - the online support suggests checking to see if the printer is in the system profile which is when I discovered I can't open the system profiler.
    Looking at one of the threads on here I went to Terminal and did the recommended but that hasn't fixed it.
    I have been to Disc Repair and fixed the Permissions ( several times over the last few weeks) I have booted from the installer disc and Disc Utilized also but I still can't open the system profiler or open the printer utility. (Ihave uninstalled the printer software.)
    I have just checked to see if I can print from the 5100 and I can but it said 'Printer Proxy unexpectedly quit'before it did.
    Can anyone out there help - I only know some stuff - it might be a case of a little knowledge is a dangerous thing!!!!.....

    I may have been right to be disappointed - look at this page on their website:
    Link
    I don't know if you can use that as it was so long. so I have copied it - It is possible to use a Western Digital external hard drive on both a PC and a Mac. There are a few things to keep in mind if you want to do this.
    The external drive comes preformatted with one large FAT32 partition. Windows 98SE and later should not have a problem accessing this partition.
    Macintosh Operating System 10.3.x or earlier will only recognize FAT32 partitions that are smaller than 128-gigabytes. Multiple FAT32 partitions smaller than 128-gigabytes will need to be created in order for Macintosh Operating System 10.3.x or earlier to recognize the partitions. You will need to use a Windows based computer to create FAT32 partitions, as Macintosh does not have the ability to create them.
    Macintosh Operating System 10.4.x or later can recognize FAT32 partitions over 128-gigabytes.
    If you will be using multiple partitions, create the partitions while the drive is connected to the PC. If you are planning to transfer files larger than 4GB to the drive, there will be a 4GB file size limit on both the PC and Mac if the partition is FAT 32 . This is a file system limitation and there is no way around it.
    If you use a PC running Windows 2000 or XP to partition and format the external drive, keep in mind that both of those versions of Windows can only create FAT32 partitions that are 32-gigabytes or smaller. This is an operating system limitation. To delete the existing FAT32 partition on the drive and create multiple, smaller FAT32 partitions, use Disk Management in Windows 2000 or XP.
    You can download and use our FAT32 Formatting utility located in our Download Library to partition and format the external hard drive as FAT32.
    Please Note: The Western Digital FAT32 Formatting utility can only create a single FAT32 partition the entire size of the external hard drive.
    I'm not sure what any of that means but if it means I have to link up to a pc I may be stuffed. (quaint English expression which might mean scr**ed in US)
    Help - please log in quick!!
    Tricia
    Message was edited by: Host to shorten URL

  • Trouble opening jpeg and pdf files.

    I have a fully current version of Photoshop (ICloud).  When attempting to open some jpeg files and pdf files, they remain ghosted and will not open.  I think it may have to do with the settings in the 'open' window but i don't know what to do.  ?????

    …and no one knows how to help you until you provide details.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Trouble opening Flash MX 2004 files in CS3

    Has anyone encountered any problems trying to open orignal
    .fla files created in Flash MX 2004 in the CS3 version? I get an
    error stating "unexpected file format".

    I tried opening your test file in my version of CS3 and it
    shut it down completely - CS3 quit
    unexpectedly. Rare for me as I have been using/testing CS3
    for months and not seen this issue - i
    suspect the file is corrupt in some way but then again it
    would open in flash 8 - can you save as
    from flash 8 with a new name and upload again?
    Chris Georgenes
    Animator
    http://www.mudbubble.com
    http://www.keyframer.com
    Adobe Community Expert
    *\^^/*
    (OO)
    <---->
    penmyles wrote:
    > Since last posting this, I have been talking to tech.
    suport, but I still don't
    > have a solution.
    >
    > The MX files can open in Flash 8. But if I save them
    from Flash 8 and try to
    > open them in Flash CS3, it still doesn't work.
    >
    > Also, I have been able to open some MX files that were
    created as test files
    > (however, they were very simple, animation without
    actionscript).
    >
    > Here is a sample of one of the files that I cannot open
    in Flash CS3:
    >
    http://www.pennymyles.com/testfile.fla
    > I'm just wondering if it's the file or my
    computer/version/installation of
    > Flash
    >
    > Thanks.
    >

  • Trouble opening files in Elements

    I can access my Elements program, but I am having trouble opening files...I've tried opening several files (JPG, PSD, etc) and nothing appears in the actual program. Any advice?

    I am using Version 12. I've tried both ways: Opened the file first in Photo Viewer, then Open > Elements...and Opened Elements first, then File > Open > Browse File. I just updated the version to 12.1, but it's still not working. Should I install and reinstall the program?

  • Error opening document: missing file

    I have a Pages template that has started opening up with the following error box:
    The following errors occurred while trying to open this document:
    Missing file: businesscircles_logosgrey.pdf
    When I hit "continue", the document (template) opens up fine and appears to be missing nothing. I've searched my computer for the missing file and it doesn't exist (and I have no recollection of why I'd insert a pdf into a template anyway...)
    Within Pages I've clicked in View>Show Invisibles, thinking that might reveal something. It didn't.
    Any ideas? Thanks!
    PS I am running Pages 2.0

    Hello,
    I had this problem a while ago with an old version 1.x file when open it in Pages 2. After some examination, it seems to appear with placeholder objects mainly (like the image you are writing about). But this was the only time I encountered the problem.
    Argelius,
    try to copy the image from the business letter template with this steps:
    1) Click on the Pages app icon with holding the control key down and choose the item "Show the Package Content" of the appearing menu.
    2) Navigate to the business letter template "Contents/Resources/<YourUsedLanguage>.lproj/Templates/ISO/Stationery/" (or "Traditional" instead of "ISO" if you are using Legal and no DIN letter sizes).
    3) Do "Show the Package Content" on the letter icon and you will see a new window with all the content of the letter.
    4) Search for the image and copy it.
    5) Show your own letter document (the document should be closed in Pages), with which the error appears, and show the package content.
    6) Paste the image into the package folder.
    Now the error message should not appear by opening the document. Search your document if the logo image is placed in it. If yes, have a look at the menu "Format/Advanced/" if the image is marked as a placeholder image. Deactivate this and than delete the image. Save the document (perhaps as a duplication) and close it. See if the problem is gone by open the new document again.

  • Thumbnails appear but missing file error message if try to open

    PSE worked fine for 2 months, when downloading to Shutterfly organizer crashed. uninstalled and reinstalled-problem persisted. Set up new user/administrator and organizer would open but with "missing file error message" if tried to open thumbnail picture. Then unistalled pse8 and reinstalled pse6. Still get missing file error, but again I can see the thumbnails. I had at one point 5000 photo's and deleted 3000 to reduce clutter using the delete from harddrive option when I did so. Now I once again have 5000 photo's cataloged ?? At this point I would be happy to simply get pse6 working as it should, any suggestions please. I have a lot of time and knowledge invested in PSE and I hate to cop out to Picassa at this point ?

    I'm slowly getting this mess untangled. It seems that on the reinstalls of pse8 following organizer crash that even photo's that were previously deleted from both catalogs AND harddrive must still keep a thumbnail version hidden in some file somewhere. when I used the delete option in the missing file dialog I was able to remove them from the current catalog. It seems as though after too many software upgrades and photo's copied and saved through the years, you might as well by a new computer and mke a fresh start. But then again I'd just have to deal with windows7 and pse8 compatibility issues anyway. D@&D if I do, D@&D if I don't scenario !!

  • Question Mark.... missing files....

    The location for my 'Saved Files' is /Users/Me/Pictures/Adobe and when I click on that folder and 'Get Info' it tells me it the size of the folder is over 31Gig.
    The folder is full of .xmp files....
    When I open PSE 12, I see all of my thumbnails, but they all have a question mark in the top left hand corner. Whenever I click on a picture, it says, "Searching for missing file".... but never finds it.
    I'm pretty sure I know how I created this problem, but I don't know how to fix it.
    I'd imported all my media from iPhoto 11... then I deleted the iPhoto Library, to eliminate duplicate data bases. Takes up double memory.... but then, I also saw, in the Adobe 'Saved Files' path, a folder called, iPhoto Library Media. I thought this was also a duplicate folder of what I already had in /Users/Me/Pictures/Adobe. So I backed it up to an external disc before deleting it.
    Then I did a 'Backup Catalogue', also to a external disc....... Now all my files are AWOL. It seems I can do a 'Restore' from the backed up catalogue, but there have been a few photo's changed since then, and I'm prompted to 'Backup' again before Restoring.... bit of a mess.....
    Any pointers appreciated....

    I can give you a pointer for the future once you find the files. So let's fast forward to the future, when you've assembled all of your photos in Elements. First, you've got to remember never to move any photos to a new folder by dropping and dragging. Instead, open Elements and choose FILE/MOVE instead.
    Here's another tip to avoid missing or reconnect photos warnings in the future. I added a folder named Temp (for temporary). It is located in the same hierarchy as my other folders contained in the Adobe folder within the photos folder. I now move all new photos into this Temp folder BEFORE opening Photoshop Elements 11. After I open the organizer I choose FILE/GET MEDIA and locate the temp folder. I then tag all the photos in that folder, assign them to albums and edit them. After that's all done,  I use Elements to move the new images to a different folder that is already being monitored by Elements (by choosing FILE/MOVE as mentioned above). This clears the temp folder. The extra few seconds means that I never get the "missing photos" or "reconnect photos" warnings any longer. Plus, I can check the temp folder to make sure all of the images I worked on have moved out and into the folder that I actually wanted to use in the first place. It's pretty fool proof and you don't forget where the photos are located if you close the program by mistake or if your computer freezes. They will be in that Temp folder until you move them using the FILE/MOVE technique.
    Good luck with Vaishali's solution.
    Alan

Maybe you are looking for