Trouble opening iPhoto library in Aperture that has been transferred to an external hard drive.

I am having trouble opening my iPhoto library in Aperture now that it has been transferred to an external hard drive.
Versions being used:
MacBook Pro 13-inch mid-2010
OS X v. 10.9.1 Mavericks
Aperture v. 3.5.1
iPhoto v. 9.5.1
Order of events: got MacBook > took pictures > created an iPhoto library > upgraded to Mountain Loin > added more photos to iPhoto library > upgraded to Mavericks > purchased and downloaded Aperture > copied iPhoto library to a 750 GB WD My Passport.
When attempting to switch to this iPhoto library while using Aperture an error stating, “Unable to Switch to Library. Aperture cannot switch to the selected library because the file system of the library’s volume is not supported.”  iPhoto can access this iPhoto library with no problem.  What is missing? Any suggestion would be greatly appreciated.

“Unable to Switch to Library. Aperture cannot switch to the selected library because the file system of the library’s volume is not supported.”
Aperture 3.5.1  is checking for file system compatibility, iPhoto not always.
copied iPhoto library to a 750 GB WD My Passport.
Check the filesystem on your WD drive. Did you remember to format the drive for MacOS, before you copied the library there? It needs to be formatted MacOS X Extended (Journaled) to be used with any photo library. iPhoto may be able to open the library, if the filesystem is not supported, but you are risking data loss.
You can reformat the drive with Disk Utility, if the file system is wrong (after backing up your iPhoto library to a different drive). See:
iPhoto: Issues with FAT32-formatted drives
Format external drives to Mac OS Extended before using with Aperture
Regards
Léonie
You see the File System in the Finder's "File > Get Info" panel, when you select the drive in the Finder and use "File > Get Info" from the main menu bar or press cmd-I.

Similar Messages

  • O I need Pages on my iMac in order to open a file that has been transferred from my iPad?

    Cannot open the Pages file on my computer that has been transferred from my iPad. Do I need to purchase Pages for my computer?

    I guess you could open it using the icloud version of Pages (on www.icloud.com).

  • Can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp

    can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Upgraded to iPhoto11v 9.5.  Have iPhoto libraries on CD and wish to copy to new external hard drive.  How please?

    Having filled my laptop with photos I copied many of them from iphoto to CD/DVDs.  I have now purchased an external hard drive.  I have successfully copied the iphoto library on the laptop to the external drive but cannot see how to copy from the Cds etc.  I have upgraded to v9.5 and they no longer appear in the source list.  The message is
    Mounting and viewing a CD/DVD within iPhoto is no longer available. To access photos on a CD/DVD created with an earlier version of iPhoto, copy the library to your computer and open it.
    Can I only acieve this by copying the cd back to internal hard drive then back to external?

    Here's how to get photos from discs created with previous versions of iPhoto into your current iPhoto 9.5 library:
    1 - copy the library from the disk to the Desktop.
    2 - download and double click on the iPhoto Library Upgrader tool to launch it  and select the library on the Desktop to convert.
    3 - launch iPhoto 9.5 and open the newly converted library on the Desktop.
    4 - use the paid version of  iPhoto Library Manager to merge the library on the Desktop into the iPhoto 9.5 library in the Pictures folder.
    5 - confirm that all of the photos from the Destkop library have been successfully imported into the iPhoto 9.5 library before deleteing the library from the Desktop.
    6 - repeat Steps #1 - #5 for each library on a disk.
    OT

  • I backed up my I-tunes library (by dragging my "music" folder to my new external hard drive.  Now 6,000  songs won't play stating, "original file cannot be found."  What can I do to get these songs back???!!!

    I backed up my I-tunes library (by dragging my "music" folder to my new external hard drive.  Now 6,000  songs won't play stating, "original file cannot be found."  What can I do to get these songs back???!!!

    Try putting the files back where they were before you moved them, then follow the steps in this Apple document -> iTunes: Back up your iTunes library by copying to an external hard drive

  • HT4796 I want to transfer my itunes from a Windows 7 machine to a new Mac, iTunes on Windows has all content on an external hard drive.  What is the recommended way to set up iTunes on my Mac so I don't lose access to my content

    I want to transfer my itunes from a Windows 7 machine to a new Mac, iTunes on Windows has all content on an external hard drive.  What is the recommended way to set up iTunes on my Mac so I don't lose access to my content

    iTunes: How to move your music to a new computer

  • Something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

    something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

    Bus powered external drive?
    Backups?
    Does Disk Utility can see and repair the drive or not?
    Also try here in future:  MacBook Pro

  • Trouble opening iPhoto library saved on ex HD after Yosemite update

    Last week I saved my entire iPhoto library onto an external hard drive (Lacie) to create more space on my MacBook Air.
    I made sure I was able to open the library safely with the 'option function' through the Lacie before deleting all of the 4k photos from my computer.
    Today I updated to the OS X Yosemite. Now when I attempt to open the library saved on the Lacie, it's showing up grey and not allowing me to open.
    ANY IDEA HOW I CAN ACCESS ALL OF THESE PHOTOS?
    Any recommendations are highly appreciated.
    Pictureless Pia

    Hi,
    I hope this helps you to ... I hat the same problem in Yosemite - iPhoto.
    Importing the photo library ... I let it run for more than 24 hours ... but nothing.
    I used iPhoto Library Manager to get back all of my photo in iPhoto.
    This works for me ... it toke about 10 minutes to get iPhoto App work again.
    You can download the iPhoto Library Manager for free and using the trail version.
    Good luck ...
    Dimaxum

  • How do I access photos that were backed up onto an external hard drive using Time Machine?

    I used to own a PC. When my computer got too full, I would back up some of my photo albums onto an external hard drive (simply by copying and pasting what I wanted to save on the hard drive) and then delete them on my computer to free up space. Occassionally, I would still plug in my hard drive to access and use those photos when needed. I now own a Macbook Pro and after having issues with my old hard drive, I bought a hard drive compatiable with Macs. I plugged in the hard drive and backed up my entire computer using Time Machine. Now I would like to delete some of my photo albums to free up space on my computer. Before I do that, I would like to double check that they are indeed on the hard drive, but every time I try to open my iPhoto Library from the hard drive I get this error message: "The iPhoto library is a Time Machine backup, and so cannot be used as the main library. Reopen iPhoto with the Option key held down to choose another library." So I tried doing that, but the only option that comes up is my main iPhoto library on my computer. I can't seem to access what is on my hard drive.
    I don't plan on deleting ALL of my photo albums, just a few. So I also want to make sure that the next time I plug in my hard drive to back stuff up, it won't copy just what is on my computer and override the last backup, because that would mean losing missing albums I had already deleted. I just want to be able to access photos on my hard drive when I want and occassionally manually add a few more albums to it. I don't intend to keep backing up my entire computer. My main concern are my photos.
    Can anyone help?

    Try Pondini's articles;
    http://pondini.org/TM/15.html - scroll down to the pink box for iPhoto restoation.
    Also http://pondini.org/TM/15A.html to clarify how to use the timeline.

  • Premier Pro Project: Created on one External Hard Drive, Transferred to Different External Hard Drive, Project Will Not Open

    Here is my problem listed in simple steps:
    I created a project in Premier a couple years ago on a G-Raid mini external hard drive.
    I backed up my project folder on a LaCie external hard drive. 
    The G-Raid mini hard drive died.
    I cannot open my project from the LaCie drive.
    When I attempt to open my project, I get 2 error messages:
    First:  "The scratch disks are write protected or unavailable. To open this project, the scratch disks will be set to your documents folder. Would you like to continue?"
    I say "Yes"
    Second: "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    I say "OK", and that's the end.
    My understanding is that the problem has to do with the fact that my original scratch disks were created on the G-Raid mini hard drive, and that Premier will not open my project because the code for my .prproj file directs Premier to a hard drive that is not connected.  I have tried to edit the code in TextEdit, replacing the name of the old hard drive with the new one where the code reads:
    <project.settings.lastknowngoodprojectpath>
    This did not work.  I also tried changing the name of my new hard drive to match what the "lastknowngoodprojectpath" reads as in the code, but that did not work either.  I have searched high and low on the internet for someone who approaches the types of error messages I receive from the perspective of trying to open the project from a different hard drive, but I cannot find anyone who is specifically giving advice about this.  Any suggestions?

    I doubt that the error concerning the sequence preview preset file or codec has anything to do with the scratch disc location.
    Here are two posts specific to the second error message:
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    What to do when you get a preview preset codec error in Adobe Premiere Pro CS6 | Val Gameiro, Writer, Director, Filmmake…

  • Transferring iTunes Library from PC to Mac (while keeping files on External Hard Drive)

    Hi,
    I've been using iTunes on my old PC (HP 2000 Notebook) and accessing all of my music from a 1 TB Toshiba external hard drive. I recently switched to a MacBook Pro and I'm trying to get my iTunes Library (145 GB worth of stuff) on to the Mac while 1) retaining my playlists, checked songs, etc. from the old computer and 2) without having to transfer the files from the external hard drive on to the Mac in order to save space.
    I've tried the Hold Options + clicking iTunes and choosing the folder (my iTunes media folder on the old computer is saved to I:\1 NTFS\Music), and when I choose that folder on the Mac, it instead brings up a really out-of-date iTunes library instead of my current one.
    Does anyone have a solution that might help me get my current library on to the Mac?
    Thanks in advance!
    Processor: 2.6 GHz Intel Core i5
    Memory: 8 GB 1600 MHz DDR3
    Capacity: 251 GB Flash Storage

    Hi,
    I've been using iTunes on my old PC (HP 2000 Notebook) and accessing all of my music from a 1 TB Toshiba external hard drive. I recently switched to a MacBook Pro and I'm trying to get my iTunes Library (145 GB worth of stuff) on to the Mac while 1) retaining my playlists, checked songs, etc. from the old computer and 2) without having to transfer the files from the external hard drive on to the Mac in order to save space.
    I've tried the Hold Options + clicking iTunes and choosing the folder (my iTunes media folder on the old computer is saved to I:\1 NTFS\Music), and when I choose that folder on the Mac, it instead brings up a really out-of-date iTunes library instead of my current one.
    Does anyone have a solution that might help me get my current library on to the Mac?
    Thanks in advance!
    Processor: 2.6 GHz Intel Core i5
    Memory: 8 GB 1600 MHz DDR3
    Capacity: 251 GB Flash Storage

  • Itunes doesn't sync music that was transferred from an external hard drive

    I transferred a song from an external hard drive onto itunes on my laptop. The song plays through itunes on my laptop after I've disconnected the external hard drive, but it won't sync the song to my iPhone. I have a lot of music on that ext. HD and I'd like to listen to it on my iPhone.

    Hi, Alex 58. 
    Thank you for visiting Apple Support Communities. 
    Try opening iTunes with the external drive connected and sync the music over to the iPhone.  If all media is located on the external drive, iTunes will not sync the requested media to the device without the drive connected.  You may need to remove the sync music preference and reapply it for the media to transfer. 
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12313
    Cheers,
    Jason H. 

  • Mac Mini has crashed - Disk Warrior and External Hard Drive Question.

    I have Mac Mini that has crashed.  I purchased Disk Warrior and was able to boot from the CD.  Disk Warrior allowed me to see my files again but there is no way I can move them back onto my hard drive.  I cannot grab them.  Before I go into specifics....If I purchase an external hard drive and try to hook it up to my Mac Mini, will I be able move these files to this new external hard drive?  Is this a possibility?
    Or will my new external hard drive need to go through a set up phase - which might be impossible since hard drive I'm trying to take the files from is technically dead?
    Sorry - I'm a novice at these things.

    Hello, no apologies needed for being a novice, great you asked!
    YES, depends where you buy the Drive, it may need Formatting first to Mac OS Extended...
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html
    These generally come Mac Ready, & get Firewire if you have a Firewire port, much faster...
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    Then in DiskWarrior, hold Option or alt key when selecting Internal to repair, that will do the best job of Scavenging the directory & provide a whole new Drive icon to copy or clone your info over to the external drive.

  • I recently got my long desired MAC, after my laptop crashed.  Is there anyway to get all of the music that I have already invested in, in iTunes, on my new Mac?  I thought that it had been saved to an external hard drive, but there were only photographs.

    I recently got my long desired MAC, after a laptop died over a year ago.  Isn't there someway to get all of the music and movies that I've already invested in, off of iTunes?  Don't they have a record of my purchases, that could be downloaded to this new computer?  I thought I had it on an external hard drive, after a friend tried to save my itunes and photographs, but there are only photographs on the hard drive.....  Any help would be most appreciated!  Thanks!

    Hello kc9agz,
    Thank you for contacting Mozilla Support. Did you back up your bookmarks before you moved to the new computer? You can find more information about backing up and restoring bookmarks in this article.
    [[Restore bookmarks from backup or move them to another computer]]
    Please let us know if this solves your issue.
    Cheers,
    Patrick

  • In need of a script that will update tv shows on external hard-drive

    Hi everyone I have a really specific question about scripts. Okay, so my dad regularly downloads various TV shows and movies etc
    and I have a neighbor named Darian who once a week gives me an external hard drive and I update a whole bunch of TV shows. Now my problem is that each time he gives me the hard drive, it takes me about 20-30 mins to update all of the TV shows because they
    are in different TV show folders, I was wondering if it is possible to make a script that when run would automatically copy all of the shows onto Darian's hard drive and then all I have to do is copy the movies which is pretty quick, here's another problem,
    all of the movies and tv shows are not on my computer but on my dad's computer, so when I copy the stuff I have to access his pc through the network and I always have to type his username and password to access his pc, so if someone could tell me if it is
    possible, the code I need and how to run it or pretty much any help, I would be very gratful, thanks in advance (:

    The best we can do is point you at the resource page and let you figure out what it is you are trying to ask:
    http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
    Rather than ask a whole shopping list of questions rey to figure out the first step that you need to take and ask a question about that..
    I also believe that it would be good for you to get a book on how to use Windows in a home network.  All of what you ask can be done without any scripts.  It is all part of basic WIndows and is designed to make this possible and easy for home users
    but you stil need to study how the system works.
    ¯\_(ツ)_/¯

Maybe you are looking for

  • Custom Workflow for sending Remainder mail in MS CRM 2013/2015 online

    Hi All, We have a requirement to send a remainder email before 5 days,3 days and on the same day of the M/TC date in lead form. To achieve this we tried using Custom Workflow. Below is the logic tried but in the highlighted line not able to retrieve

  • Please, advise mouse-over instant word by word translation for FF9

    in older version of FF I had INSTANT mouse-over the word Google translation add-on, which is not available at FF9 version. It is a huge inconvenience for me (and sure many others) , please advise which add-on has such option? I searched for one for a

  • Hide duplicate row and analytic functions

    Hi all, I have to count how many customers have two particular product on the same area. Table cols are: AREA PRODUCT_CODE (PK) CUSTOMER_ID (PK) QTA The query is: select distinct area, count(customer_id) over(PARTITION BY area) from all_products wher

  • Problems installing 8.1.7 Enterprise Developer

    Hi, we got a new machine (Pentium IV, Win2k, SP2) and I can't install this Oracle version. The setup program doesn't even start. On the previous machine (Pentium III, Win2k, SP1) there was no problem. So I installed the new machine without SP2 but th

  • Julian day function Converting wrong values

    Hi All Please chek I am giving the command to convert the number value to words and I am getting wrong output. Please advise. This is urgent. The Command I am giving is select to_char(to_date('30540','J'),'JSP') from dual; The return I am getting is