Trouble opening links

I am having problems opening links on some internet sites. For instance I cannot open the bill pay link on my banks site and I could open it at one time. I recently installed Trend Micro antivirus software on this computer and before that updated to OS 10.7 Lion. I also upgraded my wireless router today thinking it was my router that was the problem (for other reasons) and I still cannot open links. I cannot even open links in the setup of the router.
Is or has anyone else had this problem?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

I am having trouble opening links from websites I am currently on. The window will pop up but the content is blank. What should I do?

I do not know if this is a result of something I did, or something that happened when I updated Firefox. Any help would be appreciated as I really need the windows to show the content I want to see. An example of what I am talking about:
I was on Verizon's website and I wanted to sign up for more information on the iPhone. When I typed in my e-mail address and hit the submit button, another screen pops up and where there would be a web address, it says "Search Bookmarks and History" but will not show me the content.

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Trouble opening internet links in Outlook & Duplicate icon on task bar

Hi,
I am having trouble opening links in my Outlook 2010 e-mail. If Firefox is already open the links open fine but if it's not open, nothing happens when I click on the link. Also, I'm trying to figure out why, on my desktop, when I open Firefox from the quick launch area it creates a duplicate Firefox icon. On my laptop there will be just one Firefox icon, even when the program is open (the one on the quick launch bar). Any ideas? Thanks.

Another shortcut for maximizing the currently active window is to press Alt+Spacebar followed by x for maximize.
A past thread on this problem: [https://support.mozilla.org/questions/980358 opens off monitor screen].
Do you have multiple monitors by any chance? If so, can you set the monitor where you want Firefox to "primary"?
If this problem persists -- in other words, if Firefox stops saving the new position of its window(s) correctly between sessions -- the settings file that stores the last window position may be corrupted. You could try removing that file and let Firefox use its default sizing and positioning. Note: this also will default some toolbar customizations.
Here's how:
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
In the first table on the page, click the "Show Folder" button to open a new window showing your currently active settings files.
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then rename '''localstore.rdf''' to something like localstore.old
Start Firefox back up again. Is the window visible?

Having trouble trying to open links on my recieved mail. The only response I get when I click on the link is, "No associated application could be found".

Having trouble trying to open links on my recieved mail. The only response I get when I click on the link is, "No associated application could be found".
How can I correct this problem?

What type of file is it? What is the extension (the 3 letters after the . (DOT)) of the file?
Could be it is a Windows Exe file and simply will not run on a Mac. Which is good because anyone that would send you a excute (.EXE) file is up to no good. just my opinion.

Unable to open linked files in new CS3 install

One of my clients just purchased a new PC (Dell Inspiron 537S) with Windows Vista Home Premium to replace his old Inspiron 530 (also running Vista HP). After installing CS3 Design Studio and attaching an external drive loaded with his file archive, all of his Illustrator files which include links load with the following error:
"An error occurred trying to read the linked file "file.xxx". Choose Repair to locate the missing file, Replace to select another file or Ignore to leave the link unchanged."
This shouldn't be unusual, if the path to a linked file has changed, you'd need to point the link to the new path, but clicking Repair or Replace and browsing to the linked file (which invarably is in the same directory as the .ai file, and is usually a .psd which opens just fine in Photoshop) just cycles back to the same error message, ad infinitum. After about 30 tries, I got one of the links to load correctly, resaved the document, thinking that would repair it, but when I opened it again, got the error.
These files were created on multiple computers, and none of the other computers (all with CS3) have ever had any trouble opening them. This despite the drive letter on the external drive being unstable on the old system (would often be J:, K: or L:, and images always worked).
Any new .ai files we create on this file which have links all work fine.
Manually replacing the links in a file is not an option for two reasons:
1. There are thousands of .ai files in this archive, and re-linking images in them will take weeks.
2. It simply doesn't work. I tried ignoring the error on one file to load it, and re-linking the .psd backgrounds to re-save it, and the images still didn't load after re-linking them.
I have already tried doing a factory-restore of the system and reinstalling CS3, making sure that there were no errors in the install. What else might cause this behavior, and how can I resolve it?

What else might cause this behavior, and how can I resolve it?
Outdated permissions on the files from your old computer. Right-click, Properties --> Security --> Advanced, disable Inherit settings from parent folders, chose to copy. After that, delete outdated security keys and assign current ones. You may even need to go so fart as to Take Ownership of some files to correctly restore the new system's default security settings.
Mylenium

I have trouble opening and closing tabs in the update 3.6 versions, what's going on?

After the recently updated 3.6 versions came out, I started having trouble opening and closing tabs. Is anyone else having this problem with the updated versions?

There may be a problem with an extension, try the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Safari wont let me open links in new tabs anymore? Please help!?

On my Macbook, I'm using Safari as my browser.
Everything was fine until this morning; suddenly Safari will not give me the option of opening links from one page in another tab in the same window.
For example, if I'm browsing on EBay and want to open a search result in a new tab of the same window, usually when I would right click on my track pad or magic mouse, it would say "Open link in new tab" or "Open link in new window". However, now when I right click, it just says, "Open link" "Open link in new window" and "Copy link".
I haven't changed any settings or anything on my Macbook whatsoever in the last 3 hours (at least that I'm aware of). Can anyone please tell me how to get this back to normal?
Also, it seems that when I right click anywhere on a page, I only see the options "back" and "reload" whereas before there was "view source" etc.
Please help!
xx0

Hi,
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Since you are running Snow Leopard, *make sure Safari is opening in 32-bit mode, not 64*. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) *make sure Safari is NOT running in Rosetta.*
  Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
If Safari still won't let you open links in new tabs, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
If your forum profile is correct (10.6.1) go to the Apple Menu/Software Updates ...
Very important to keep your system software up to date.
If you install the 10.6.3 update make sure and repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn
Edited by: Carolyn

Having Trouble Opening TIFF Files

I'm having trouble opening TIFF files into Camera Raw. I have checked all my settings in Adobe Bridge and everything seems to be saying that TIFF files should open in Camera Raw when I click on then int and then into photoshop when finished editing in camera raw.
I'm trying to open 32 bit HDR images saved as a TIFF file into Camera Raw, and there seems to be nothing I can do to get them there. I have tried everything I can think of. When I right click on it (cmd click I'm on a mac) the option to open in camera Raw isn't there. I have tried clicking and dragging the image into Photoshop to try and force it maybe to open into Camera Raw, and I have opened photoshop and tried opeing it up from mini Bridge. In mini bridge I have the option to open the image into Camera Raw when I click this nothing happens.
I'm not sure what else to try I'm on CS6 and Camera Raw 7.0 .

Alright I'll try that thanks!
Date: Wed, 19 Mar 2014 23:34:31 -0700
From: [email protected]
To: [email protected]
Subject: Having Trouble Opening TIFF Files
    Re: Having Trouble Opening TIFF Files
    created by R_Kelly in Adobe Camera Raw - View the full discussion
It might be that you need to update camera raw to version 8.3 by going to Help>Updates from within photoshop or bridge.
(i don't remember exactly in which version of acr that was added, but probably after version 7.0)
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6226366#6226366
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6226366#6226366
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6226366#6226366. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Camera Raw at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Trouble Opening Illustrator on CS5.5

I am using the Design Premium cs5.5 on my mac computer. I am having trouble opening the illustrator programme. All the other programmes in the suite work but when I go to open this one it opens to the 'initialising' page and then nothing. Ive tried reinstalling the programme as well but nothing seems to help.

Version 10.6.8
I read the link you posted. This is what I got from the error report:
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                         0x00007fff87bfaf0c objc_msgSend + 40
1   com.apple.AppKit                        0x00007fff85674a7c -[NSTableView preparedCellAtColumn:row:] + 323
2   com.apple.AppKit                        0x00007fff8568d963 -[NSTableView _drawContentsAtRow:column:withCellFrame:] + 47
3   com.apple.AppKit                        0x00007fff8568d8d9 -[NSOutlineView _drawContentsAtRow:column:withCellFrame:] + 95
4   com.apple.AppKit                        0x00007fff8568c9fc -[NSTableView drawRow:clipRect:] + 1242
5   com.apple.AppKit                        0x00007fff8568c2ef -[NSTableView drawRowIndexes:clipRect:] + 369
6   com.apple.AppKit                        0x00007fff8568c170 -[NSOutlineView drawRowIndexes:clipRect:] + 131
7   com.apple.AppKit                        0x00007fff8568ac9c -[NSTableView drawRect:] + 1302
8   com.apple.AppKit                        0x00007fff85680d75 -[NSView _drawRect:clip:] + 3566
9   com.apple.AppKit                        0x00007fff8567e54b -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] + 2112
10 com.apple.AppKit                        0x00007fff8567eed6 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] + 4555
11 com.apple.AppKit                        0x00007fff8567eed6 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] + 4555
12 com.apple.AppKit                        0x00007fff8567eed6 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] + 4555
13 com.apple.AppKit                        0x00007fff8567eed6 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] + 4555
14 com.apple.AppKit                        0x00007fff8567eed6 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] + 4555
15 com.apple.AppKit                        0x00007fff8567db2c -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] + 254
16 com.apple.AppKit                        0x00007fff8567a3de -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 2683
17 com.apple.AppKit                        0x00007fff855f3c0e -[NSView displayIfNeeded] + 969
18 com.apple.Foundation                    0x00007fff82c36351 __NSFirePerformWithOrder + 384
19 com.apple.CoreFoundation                0x00007fff83b07b07 __CFRunLoopDoObservers + 519
20 com.apple.CoreFoundation                0x00007fff83ae3434 __CFRunLoopRun + 468
21 com.apple.CoreFoundation                0x00007fff83ae2d8f CFRunLoopRunSpecific + 575
22 com.apple.HIToolbox                     0x00007fff86fa974e RunCurrentEventLoopInMode + 333
23 com.apple.HIToolbox                     0x00007fff86fa94b1 ReceiveNextEventCommon + 148
24 com.apple.HIToolbox                     0x00007fff86fa940c BlockUntilNextEventMatchingListInMode + 59
25 com.apple.AppKit                        0x00007fff855c3eb2 _DPSNextEvent + 708
26 com.apple.AppKit                        0x00007fff855c3801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
27 com.apple.AppKit                        0x00007fff8558968f -[NSApplication run] + 395
28 com.apple.AppKit                        0x00007fff855823b0 NSApplicationMain + 364
29 com.apple.Console                       0x00000001000017a0 0x100000000 + 6048
Im not sure if that helps you help me haha

Why won't Safari open links in a frame in a new window?

I am having trouble with Safari not opening links on a certain page. I am using OS 10.8.2 and Safari 6.0.2. The links on this site work in Firefox and Chrome, but not Safari. I have tried the same page on older computers with older versions of Safari, and they work like they always have.
The only thing I can think of that might be causing an issue is that the links reside on a frame within a webpage. If I hold down command and click the link it will open in a new tab, but I don't want to have to hold down the command key every time.
Thanks in advance for any help.
-Kristen

Okay, I think I know a little more about why Safari is having issues with these links. The link has some Javascript in it (onclick="logAction('Lesson Planet - Quick Link');return true;") that records that it was clicked for statistics logging:
<a href="http://www.sbceoportal.org/jsp/lesson_planet.jsp" title="Thousands of searchable lesson plans vetted by teachers." target="_blank" onclick="logAction('Lesson Planet - Quick Link');return true;">
<img src="quick_links_files/lesson_planet.jpg" width="230"></a>
When I take the Javascript out, Safari will open the link. I'd really like to leave the Javascript in, because we are recording statistics this way. Is there any workaround?
Thanks,
Kristen

I cannot open links in my emails for à week.

I cannot open links fromage my emails for a week. I have not change a thing in apps or in my mail box configuration. Do you think I have a malaware or something ? Howard CAN I Check ? Thanks

If you haven't, install this service pack.
Description of Office 2003 Service Pack 3
And try this. Open Default Programs in Control Panel and set Internet Explorer as your default browser. If you have trouble with that, see this web page.
Change your default web browser
-Jerry

Why am I having trouble opening my gmail account on safari? It's driving me crazy! =(

Hello! =)
Can anyone help me? I have been having trouble opening my gmail account with Safari this week. I had to download firefox in order to check my email. It's terrible!
Thank you,
V

I have multiple gmail accounts that are linked through gmail.
Only some open in Safari. I also had to use Firefox to access these accounts.
Today, in Safari, I secondary clicked in the address bar while the page was stuck loading. I found an option "Open URL" which I clicked on, and the account page opened quickly.
I tried this several times and so far this has always worked.
To be sure that you are clicking in the address bar, the address should be highlighted.
I know that this is several months since your post, and I do not know if you have found a solution, but I thought I would share this work around. And I hope this helps.
MacBook Pro, Mid 2010, OS X 10.8.2, Safari 6.0.1.

Outside-In open linked object

Hi,
I'm trying to parse through documents and I am having trouble figuring out how to open linked objects. For example, when parsing through pst documents, attachments appear to be held in a linked object. When I try to open the linked object using DAOpenDocument I always get error 15, invalid parameter. The call that I'm using looks like this:
IOSPECLINKEDOBJECT caSubContent;
caSubContent.dwStructSize = sizeof(IOSPECLINKEDOBJECT);
caSubContent.dwObjectId = caContent->dwData1;
daErr = DAOpenDocument(&hDoc, IOTYPE_LINKEDOBJECT, &caSubContent, 0);
Does anyone know what I may be doing wrong here?
Thanks

Hi Issac,
Please try the following, if your column is an edit text column.
(I haven't it tried for linked object column.)
Change 13 to your column no.
Dim objEditText As SAPbouiCOM.EditTextColumn
objEditText = objGrid.Columns.Item(13)
objEditText.LinkedObjectType = SAPbouiCOM.BoLinkedObject.lf_BusinessPartner
Regards,
Geetha
Edited by: Geetha Sriram on Apr 14, 2008 5:45 PM

I used to be able to open links in a new tab by clicking my middle mouse button, but now that I've updated it to the most recent update it doesn't work anymore. How do I fix this? I really love that feature. It works in IE and Chrome but not Mozilla.

Ok, I used to be able to open links up in a new Tab using my middle mouse button. However, I updated firefox with the automatic Updates on the 26th of October and now I no longer can open links with my middle mouse button. Why? I use this feature just about every time I go searching on the internet so I really would like it back. I couldn't find anything that it was related to in the options so I turn this over to you guys.

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

I can't open links in firefox. I must drag them to the tool bar or right click and open in a new page

I am running Vista and installed a new version of firefox yesterday plus I messed around with trying to block some obnoxious advertising pop up windows. Now I can't open links and must drag them to the browser bar or right click and "open in a new window". How do I fix this? I tried to restart Firefox but it didn't help. thanks!

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try to open a new window and see if that window works.
You can check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Trouble opening links

Similar Messages

Maybe you are looking for