Trouble opening single port for two local IPs

Hey,
I have multiple computers on my Airport network and want to open Port 6112 on a couple of them. I have been able to in previous versions of Airport Utility, but seem to be unable in this one (I haven't attempted to do this for about a year, so the current layout of port mapping could be a few versions old)
Basically I want to open port 6112 on the local IP adresses: 10.0.1.2 and 10.0.1.7
I have been unable as Airport Utility claims that the port mapping entry already exists. But really it exists only on one of the IP adresses, (10.0.1.7) and the other remains closed (10.0.1.2).
Anyone able to help me out?

You can only map any port to a single IP address.
To get to the 2nd IP address you will need to use a different public port. For example map public port 8112 (instead of 6112) to private port 6112 to your 2nd IP address.

Similar Messages

  • Can I create a single PO for two company codes

    Hi
    Can I create a single PO for two company codes. Though I know that Company code is assigned at header level but still I know there is a setting in controlling which when activated two company codes under same controlling area can procure the goods under the same PO.But i forget from where to activate that message or control in config.
    Thanks

    Hi Lekhram,
    I'm just beginner so maybe I got the wrong end of the stick.
    If you order something that something must belong to a definite company > plant. How could possess two company the same thing at the same time (totally)?
    (companies are at the same organisational level - none of them is subject to the other).
    Maybe I'm mistaken.
    So I <b>guess</b> you can use only one company code for one PO.
    Controlling area & company code
    http://help.sap.com/saphelp_46c/helpdata/en/e5/077a704acd11d182b90000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/08/513f4b43b511d182b30000e829fbfe/frameset.htm
    Purchasing & organisation
    http://help.sap.com/saphelp_46c/helpdata/en/75/ee0a9555c811d189900000e8322d00/frameset.htm
    All the best
    Csaba

  • Opening specific ports for video

    Hi!
    I want to open some ports for one specific host on the inside network. I want the host to be able to call out to any host on the internet. What is the easiest way to do this?
    I have many public IP adresses so the inside host can easily be Natted with one of the public adresses.
    /Lajja1234

    Easiest way,
    Do a one to one translation and open the right ports on the Outside ACL..
    Just like 5 commands and that will do it

  • I'm having trouble opening pdf files for weeks now. Help please.

    I'm having trouble opening pdf files for weeks now. Can someone help me?
    It

    Hi,
    Do you have Adobe Reader installed on your device? You can check it under Settings-->Apps. If Adobe Reader is installed on your device and still the pdfs open in some other app, then you might have chosen that app to be the default app for always opening pdfs. You can clear the defaults for that application. Just go to Settings-->App--->Polaris(or any other app where the files open)--->Clear Defaults. Next time you try to open a pdf, you will be presented with the options again. Hope this helps. Please let us know if you still face some issues.
    Thanks.

  • Define a single scope for two Custom Lists

    Hi,
    I have ran into a requirement where i have to create a single scope for two lists 'Employee' and 'Department' .
    I tried creating individual scopes and they came up in the scope drop down . For this i gave the scope rule as below :
    Both lists are based on Item content type . There are other lists that are based on same content type,Hence I cant create a rule based on CT .How can I create a single scope for both lists .
    Thanks,
    Grigory

    Hi Grigory,
    when you create a scope, then add two rules, as the image below shows:
    I hope this help.
    Thanks,
    Victoria
    Victoria Xia
    TechNet Community Support

  • Clear  Single  Payment for Two Invoices

    Hi All,
    I am working on lock box file.where iam geting the payment information of customer.File contains record type as '1'  '2'  '5'  '6'  '4'  '7'  '8' '9' .They already developed a program based on standard programs like :
      RFEBLB00    Import Lockbox File
      RFEBLB20    Lockbox: BAI Format Processing
      RFEBLB00    Main Lockbox Program
      RFEBBU01    Post Temporary Storage Data Call
      RFEBBU00    Update Account Statement/Check Deposit Transaction
    that program working for Single Payment for Single Invoice.It clear the invoice for Single Payment for Single Invoice.But when they are trying to run for  Single  Payment for Two Invoices then its not posting.How can i clear the  Single  Payment for Two Invoices .Is possible to clear the  Single  Payment for Two Invoices .Please do need ful help ASAP.
    Thanks

    If the lockbox file being processed by RFEBLB00 has more than one invoices for a single check (i.e. multiple type '4' records for a type '6' record), the payment doc created will be for both these invoices.
    Now when you clear the payment doc using FBRA or F.80, both these invoices will be cleared.

  • How to use two gtx transceivers in one quad for two aurora ips

    hera mgt bank is 113
    i am using two aurora ips 64b66b .for one ip GTX_X1Y0, another GTX_X1Y2.while simulating ,results are good.Coming to implementation its showing error in implementaion.that in MAP.
    Pack:2811 - Directed packing was unable to obey the user design constraints (LOC=GTXE2_COMMON_X1Y1) which requires the combination of the symbols listed below to be packed into a single GTXE2_COMMON component.
    The directed pack was not possible because: The target component type can only contain one fragment.
    The symbols involved are:
    GTXE2_COMMON symbol "Source2/Aurora_2/src_2_wrapper_i/Src_2_multi_gt_i/gtxe2_common_i" (Output Signal = NULL)
    GTXE2_COMMON symbol "Source1/Aurora_1/src_1_wrapper_i/Src_1_multi_gt_i/gtxe2_common_i" (Output Signal = NULL)
    What is the solution for it?
     find attachments.

    i got following error while implementing project in vivado.
    "[DRC 23-20] Rule violation (REQP-1739) GTx R/TXOUTCLK drives inappropriate load - GTXE2_CHANNEL cell design_1_i/aurora_64b66b_0/inst/design_1_aurora_64b66b_0_0_core_i/design_1_aurora_64b66b_0_0_wrapper_i/design_1_aurora_64b66b_0_0_multi_gt_i/design_1_aurora_64b66b_0_0_gtx_inst/gtxe2_i pin design_1_i/aurora_64b66b_0/inst/design_1_aurora_64b66b_0_0_core_i/design_1_aurora_64b66b_0_0_wrapper_i/design_1_aurora_64b66b_0_0_multi_gt_i/design_1_aurora_64b66b_0_0_gtx_inst/gtxe2_i/TXOUTCLK (net: design_1_i/aurora_64b66b_0/inst/design_1_aurora_64b66b_0_0_core_i/design_1_aurora_64b66b_0_0_wrapper_i/design_1_aurora_64b66b_0_0_multi_gt_i/design_1_aurora_64b66b_0_0_gtx_inst/tx_out_clk) should only drive BUFG, BUFH, BUFMR, MMCM or PLL loads, but drives one or more invalid loads such as FDRE cell CORE_STATUS_channel_up_master_reg. Please insert a BUFHCE (or a BUFMR, if the load is a BUFR) between the GT and its load(s).
    [DRC 23-20] Rule violation (REQP-1739) GTx R/TXOUTCLK drives inappropriate load - GTXE2_CHANNEL cell design_1_i/aurora_64b66b_1/inst/design_1_aurora_64b66b_1_0_wrapper_i/design_1_aurora_64b66b_1_0_multi_gt_i/design_1_aurora_64b66b_1_0_gtx_inst/gtxe2_i pin design_1_i/aurora_64b66b_1/inst/design_1_aurora_64b66b_1_0_wrapper_i/design_1_aurora_64b66b_1_0_multi_gt_i/design_1_aurora_64b66b_1_0_gtx_inst/gtxe2_i/TXOUTCLK (net: design_1_i/aurora_64b66b_1/inst/design_1_aurora_64b66b_1_0_wrapper_i/design_1_aurora_64b66b_1_0_multi_gt_i/design_1_aurora_64b66b_1_0_gtx_inst/tx_out_clk) should only drive BUFG, BUFH, BUFMR, MMCM or PLL loads, but drives one or more invalid loads such as FDRE cell CORE_STATUS_1_channel_up_slave_reg. Please insert a BUFHCE (or a BUFMR, if the load is a BUFR) between the GT and its load(s).
    [USF-XSim 62] 'compile' step failed with error(s) while executing 'F:/PERSONAL/XilinxVivado2014.2/shared_logic/shared_logic.sim/sim_1/behav/compile.bat' script. Please check that the file has the correct 'read/write/execute' permissions and the Tcl console output for any other possible errors or warnings.
    [Vivado_Tcl 4-23] Error(s) found during DRC. Placer not run."
    i am attaching topmodule file
    need solution
    thanks in advance
    razz

  • Open same port for multiple servers.

    I am sorry if this sounds rudimentary, but I wanted to make sure. I want to open up port 80 to more than one web server. I already have port 80 open on one public IP address and have another one ready to use for another server. My assumption is that I should just be able to create a policy using the additional IP address and use port 80 without any issues. Is that correct to assume? I would also like to know, how one would do this is they only had one public IP address. I believe these should be relatively easy questions for the experts here. Thanks.  

    If you have a netblock from which you can assign multiple IP addresses then, yes - just asign additional access-list entries and static NAT entries.
    If you only had a single (or limited number all in use) public IP address then you would have to use some sort of PAT (port address translation). for instance:
    server 0 is <outside address>:80
    server 1 is <outside address>:81
    server 2 is <outside address>:82
    ..etc. Your remote users would then have to specify the non-default port (80/81/82) when browsing to the site.

  • Problems opening up ports for E1200

    I am trying to open ports 53, 80, 88, 1863 and 3074 for my xbox.  I gone through several help pages on how to do this.  I then run PFPortChecker by Portforward and it tells me the ports are not open.
    background:
    I have given my computer a static IP - 192.168.1.50
    I have given my xbox a static IP - 192.168.1.101
    I have ensured my router has the most up-to-date firmware
    I have entered all ports through the " Single Port Forwarding" screen on the web based interface
    I am basically computer illiterate.  I figure stuff out by trial and error.
    Thank you.

    Thank you, everyone. 
    Kawai,  I have set the open portson my router  to:
    Xbox_LIVE1 50 - 50 - Both 192.168.1.99
    Xbox_LIVE1 80 - 80 - TCP - 192.168.1.99
    Xbox_LIVE1 88 - 88 - UDP - 192.168.1.99
    Xbox_LIVE1 1863 - 1863 - Both - 192.168.1.99
    Xbox_LIVE1 3074 - 3074 - Both - 192.168.1.99
    I aslo change the static IP address on my xbox to - 192.168.1.99.
    When I run an internet test, I am now told my NAT is set to moderate.  Using the link jibjib provided, I've determined my IP address is private (subnet of 255.255.255.0).  Thus I need to bridge my modem.
    Am I on the right track here?  
    So in the meantime, I have called my ISP (Knology) and found out they do not offer static IP addresses.
    I'm now on the phone with a Cisco rep and she has offered to connect me to a "third party support provider".  But I don't see how any of this can help since my ISP will not provide a static IP address.
    Does anyone have any thoughts?  Thank you again.

  • How to open a port for CCTV on Router Cisco DDR2201v1

    Hello, I want to know how could I configure a Router Cisco DDR2201v1 for watching my CCTV System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work. Could you help me please? Thanks
    Can anybody tell me what's wrong with this configuration. 

    Hi.
    Welcome to Cisco Home Community.
    Please follow this link, https://supportforums.cisco.com/   for the correct product category.
    Thanks.

  • One Thunderbolt port for two HDMI devices?

    Hello
    I was wondering, is there some sort of adapter that I can put in the thunderbolt port for my mac mini and connect two hdmi devices (monitors)?
                                  HDMI 1
    Mac Mini - 1 TB <
                                  HDMI 2

    Use the HDMI port for one monitor and a mini displayport to HDMI adopter on the other. That adopter plugs into the Thunderbolt port.
    You want to set them up as extended displays.
    he following also applies to Yosemite
    http://support.apple.com/kb/HT5891
    OS X: Using multiple displays in Mavericks

  • Single shipment for Two materials

    hi ,
    the scenario is  we have  a situation
    whre two material are made in two diffferent plants
    but the customer orders these two materials in a single sales order
    normally what happens is when ever tihis situation occurs, the material which is manufactured in plant B is sent to plant A and in plant A both the materials are consolidated and sent in a single shipment
    we need to automate this process
      when ever we enter both the materials the system needs to know that the second material which is manufactured in plant B needs to be sent to Plant A
    and the delivery for the material in plant A has to wait until the material from plant B comes.
    When you create sales order for two materials, the stock transfer should happen automatically.
    Thanks
    Munna

    hey
    why do you need the automation? i mean when you can solve it through standard..
    you can go through MMSTO . as material is maintained in different plants and you ll be sending the goods through the Shipping point maintained at Plant A ( where material A is produced) right?   but if you ve 2 shipping points the delivery will split but still you can send it through single shipment iff you ve a single transportation planning point... give a thought there is no need of automation unless the organisation say so...
    hope it has helped u a bit
    regards
    chetan

  • How to create a single delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incoterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Prerequisite for Grouped delivery
    1. Header data should be same like Inco terms,Payment terms
    Go to VL10A
    Enter the sales order Numbers and execute
    Select the sales order Nos  for the group delivery and select "Background"  Tab in Tool Menu Bar
    If delivery is created coloured line items will get generated
    Check the log for delivery docuements
    Check and confirm
    Senthils

  • Not getting single delivery for two sales orders

    Hi Sapians,
    I am getting one delivery for two sales orders in VL10A.  But in another case, out of two sales orders, for one order I went to partner functions and changed the address line of ship to party while creating sales order.(Since for that particular order the ship to address is different). then as usual I proceeded to VL10A. But this time system gives two seperate delivery document numbers instead of one which is given earlier. Can any of the experts help me in this regard.
    Thanks for your response in advance.
    Raksha Agarval

    Hi Raja,
    Just now I came out with exact problem. While creating sales order, in the header data partner function tab, if we select the ship to party line item and go for details tab and change the address first line item (that is street number), the same change is also if we do in second sales order also, then if we go for delivery in VL10A, then system gives two delivery documents instead of one.( though, all the requirements are met, like same plant, shipping point, shipping conditions, incoterms.. etc).
    Even after meeting the requirements, as per SAP standards also why system giving two delivery documents? is the problem.
    Please come with possible reasons
    Thanks in advance,,
    Raksha.

  • Open all ports for gaming

    Hello yes I am trying to play call of duty for PC and my internet is slow... 30Mbps,30Mbps.... I read up online that I need all my ports open to have my NAT type open....Sadly i dont know how do to this. Can anyone explain?

    samgun1993 wrote:
    Hello yes I am trying to play call of duty for PC and my internet is slow... 30Mbps,30Mbps.... I read up online that I need all my ports open to have my NAT type open....Sadly i dont know how do to this. Can anyone explain?
    Put the machine in the DMZ
    Logon to the router as admin
    select firewall settings
    select dmz host
    check the dmz host ip address and enter the ip address of your gaming machine
    say OK
    Be aware that putting the machine in the DMZ exposes it completely.
    So an alternative is to forward the ports
    I belive they are 3074 for the game and 3658 for voice
    logon to the router as admin
    select firewall settings
    select port forwarding
    select new entry
    specify the ip address of the machine
    under protocols select user defined
    give the app a name
    select new server ports
    select tcp for protocol
    select source port any
    select destination port single and 3074
    say ok
    repeat for the other port
    You'd be better running wired than wireless.

Maybe you are looking for

  • Parallels and disk utility problem

    ok i have parallels installed and using the boot camp partition, however the disk utility keeps changing the disk id (e.g. disk2s2) and everytime this has happens I need to edit the pvs file. Now this is a real ball ache. Can anyone tell me if there

  • Firefox will not start in normal (hour glass for a second) or in safe mode (closes after choice box).

    Firefox will not start in normal (hour glass for a second) or in safe mode (closes after choice box). I tried all of the following with no success: - uninstalling and reinstalling mozilla with no success. - End all firefox.exe from the task manager a

  • BT capped my line.............WHY ?

    BT Broadband Capped ........why ? I have been with BT for many years, from dial-up to Broadband. At present I'm on BT Broadband Option 3 Unlimited. I've never had a problem until now. My BT exchange (Sacriston) supports ADSL 8mbs. That I live 0.4 kms

  • Rownum Between Operator

    Hi, SELECT ROWNUM FROM DUAL WHERE ROWNUM BETWEEN 10 AND 20 Returns 1; SELECT ROWNUM FROM DUAL WHERE ROWNUM BETWEEN 10 AND 20 No Rows returned. Is that not possible to select rownum between two values.?

  • Random Turn Offs

    im having a problem every now and then my ipod will randomly stop while listening and when you look at the screen it says that no battery power remains when its charged, then when i turned it back on it goes through the reset options then its fine ag