Trouble out of no where

when trying to sync my ipod i get the error message:
iTunes has detected an Ipod that appears to be corrupted. You may need to restore this Ipod before it can be used with iTunes. You may also try disconnecting an reconnecting the Ipod.
and when i click restore is does not work..i get another error message:
The ipod could not be updated. An unknown error occurred (1417)
i just updated to the newest software so im all good there.
suggestions please.
thank you.
Message was edited by: rose408

Have you had a chance to look at this troubleshooting page? It may be of some help: Error 1415, 1417, 1418, or 1428 when restoring or updating an iPod in iTunes 7 or later

Similar Messages

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone?

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

Out of no where, will not connect wirelessly.

I just purchased a Windows 8 pc. However, I take such good care of my techie things I still have an old Toshiba laptop about 8 years old, maybe a little less that runs just great, it's just the technolgy was getting a little behind. It's the old style "tablet" that has the swivel screen and was considered "heavy" accord to our standards today.
The Toshiba Satellite (circa 2005) laptop is an XP with all the updates and service packs. I keep it lean and clean with Advanced System Care, have for months with no problem. It was always used to connect wirelessly.
About the middle of February I switced from Verizon slow DSL to Comcast because we have no other choice for a faster speed. No FIOS. But, I've come back a full 180 to Verizon. However I did get a new modem, the latest advances. It's a D-Link ADSL2+ (DSL2750B) Supposed to run 3 to 6 times faster than the old Verizon modem I had. When I first connected to the DSL I turned this laptop on, connected wirelessly and it was there great going! I was even hitting almost the top speed I am provisioned for wireless. The modem is only 2 feet away but still. I turned if off, turned my attention back to the new Windows 8 machine for a day couple of days
Then I wanted to go back and check the Toshiba XP and revel in it's great performance on this new modem .... drat!! It detects all local stations, even of course mine, but when I try to connect it tries but fails and jumps to a neighbors DSL. I can however connect with the Ethernet cord.
I've been using this Toshiba Tablet for months with a USB wireless adapter just fine that a friend gave me. In fact either the internal wireless adapter and the USB worked with not a problem but tests seemed to show his gift of the adapter was a little faster, so I use it exclusively.
So neither wireless adapter, internal or USB will connect to my modem. I even tried pressing the WPS button on the modem, the one that's lets someone near log on without a password.
So there it is. Can anyone have a clue why this worked at the first and now won't? Also, all other pc's, including a netbook with XP and a new small android tablet are connecting no problem. It's the Toshiba laptop alone that for some reason ...
out of no where, will not connect wirelessly. Is there an easy fix than uninstalling drivers? But why would both adapters get a corrupted driver at the same time? I hope there is help here. Thanks so much for reading this and consdering my situation. Jack ":-D

Since the computer can connect with the neighbor's router, I don't think there is a problem with wireless connection on the computer. So it has to be some configuration or settings problem with the new modem. I would check the encryption of the new modem. If the computer can see the modem, but not connect, my thinking is that the encryption is blocking the connection. Temporarily disable the encryption on the new modem and see if that makes a difference. If it doesn't, you may want to check the advanced settings on the modem and compare the IP settings on the computers that work versus the one that doesn't.

Outer Join with Where Clause in LTS

HI all,
I have a requirement like this in ANSI SQL:
select p1.product_id, p1.product_name, p2.product_group
from product p1 left outer join product_group p2 on p1.product_id = p2.product_id
and p2.product_group = 'NEW'
In Regular SQL:
select p1.product_id, p1.product_name, p2.product_group
from product p1, product_group p2
WHERE p1.product_id *= p2.product_id and p2.product_group = 'NEW'
In OBIEE, I am using a left outer join between these two in Logical table Source, and also, Gave
p2.product_group = 'NEW' in WHERE clause of LTS.
This doesn't seem to solve purpose.
Do you have any idea how to convert WHERE clause in physical query that OBIEE is generating to something like
product p1 left outer join product_group p2 on p1.product_id = p2.product_id AND p2.product_group = 'NEW'
I am using Version 10.1.3.4.1
Creating an Opaque view would be my last option though.

Hello
I have read your post and the responses as well. and I understand that you have issues with the Outer Join with where Clause in LTS.
Try this solution which worked for me (using your example ) -
1. In the Physical Layer created a Complex join between PRODUCT and PRODUCT_GROUP tables and use this join relationship :
PRODUCT.PROD_ID = PRODUCT_GROUP.PROD_ID AND PRODUCT_GROUP.GROUP_NAME = 'MECHANICAL'
2. In the General Tab of PRODUCT table LTS add PRODUCT_GROUP table and select Join Type as Left Outer Join.
3. Check Consistency and make sure there are no errors .
when you run a request you should see the following query generated -
select distinct T26908.PROD_ID as c1,
     T26908.PROD_NAME as c2,
     T26912.GROUP_NAME as c3
from
     PRODUCT T26908 left outer join PRODUCT_GROUP T26912 On T26908.PROD_ID = T26912.PROD_ID and T26912.GROUP_NAME = 'MECHANICAL'
order by c1, c2, c3
Hope this works for you. If it does please mark this response as 'Correct' .
Good Luck.

My ipod touch stopped working out of no where and now it wont turn on what should i do?

my ipod touch stopped working out of no where how do i turn it on?

Try a hard reset.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  120G Vertex 3 SSD Boot HD 

Not able to find out the path where i need to place the .plx file on server

I have to make some changes in the PLL (library) file and compile it into it's .plx file and move the .plx to the server.
I am not able to find out the path where i need to place the .plx file on the server.
I have placed it in /iasapp01/app_name/library,but it is not taking it into effect.
Please help,if anyone knows about this,as to how to solve this issue
Thanks
GAG

Hi Andreas,
My Forms Version is 9.0.2 and the application server is 9iAS( 9.0.2)
The variable FORMS90_PATH in the .env file has the following entries
FORMS90_PATH=/iasapp01/app_name/fmx:/iasapp01/app_name/library:/iaspp01/app_name/html
and i have placed the plx in the /iasapp01/app_name/fmx path,but somehow its not referencing it.
My Formsweb.cfg has the following entry...
[app_name]
pagetitle=app_name_WEB
serverapp=/app_name/app_name
width=800
height=550
colorscheme=blue
separateframe=true
form=log.fmx
otherparams=REPORT_PATH=/iasapp01/app_name/html/report_files/ FILE_PATH=/iasapp01/app_name/rep/
WEB_PATH=http://server.com:7778/app_name/
envfile=/ias01/app/oracle/product/ias_9.0.2/forms90/server/app_name.env
I have another question which is ..Does applciation built on Forms 9.0.2 would work on Internet Explorer 8 and Windows 8 environment using Sun JRE.
I was going through this website
http://nutthaphon.blogspot.com/2009/05/how-do-jinitiator-and-jpi-parameters.html
and followed the steps as mentioned,but it did not work for me.
Can you help me if you have any info on this?
Thanks
GAG

What do i do if my iphone just shuts down out of no where and wont turn back on or even charge?

ok so my iPhone 4s shut down out of no where about 38 minutes ago. I had just gotten off the phone and gotten into my car when I saw the black screen. I thought it just locked like it normally did, so I clicked the power button but nothing happened. then I held the power button longer, thinking it must be dead, but again nothing happened. So, I put it in the charger and again, nothing showed up. I had recently updated to the new IOS8 earlier this morning and found nothing wrong. everything was working perfectly fine until now. If anyone has suggestions or knows how to fix this, I'm up for advice.

Plug it in to a power outlet so it is sure to be powered, then do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if tht appears.

Can anybody please help me to find out the link where small co.

can anybody please help me to find out the link where small companies implementing saps.

Hi,
SAP is providing a solution to Small Scale Industries with SMB (Small and Midsize Business) Product for various industries. It's a Pre configured SAP Solution pertaining to a specific industry(like Pharma, Oil..etc) with which the implementation as well as the cost will also decreases.
Regards,
Jayaram...

My speakers from my iPhone 4S is not working I'm clicking on the buttons on the side nd the volume is not even showing getting louder or lower but when I plug in my ear phones I can hear it juss happen out of no where what sould I do ?

My speakers from my iPhone 4S is not working I'm clicking on the buttons on the side nd the volume is not even showing getting louder or lower but when I plug in my ear phones I can hear it juss happen out of no where what sould I do ?

Your iPhone charging port may have a minor short, causing iPhone to falsely sense it is connected to a dock turning off its speaker. Clean iPhone charging port with a clean dry toothbrush.

Why did my iPad Mini screen start glitching out of no where?!

Why did my iPad Mini screen start glitching out of no where?! Hard reset did not fix issue... Which I could barely see the display at it was.. Please help..

Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Why does my iPod close safari or any apps out of no where? And I just bought it about 4 days ago...

I need to figure out why it closes my apps sometimes out of no where... I hope someone can help me...

Try these basic troubleshooting steps:
Basic Troubleshooting Steps for iOS
(Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

I have an iphone 6 plus. although out of no where, it gave me no service. I've already shut it off and turned it back on and even reset network settings, but it continues saying likewise. What do I do?

I have an iphone 6 plus, although out of no where, it gave me the notification of no service. I've already shut it off and turned it back on several times and even reset the network settings, but it continues saying likewise. What do I do?

FIRST, call your carrier and ask if they have a local network outage. Also try moving a few miles from your current location to see if you have coverage elsewhere. Next, contact your carrier and get a replacement SIM. If that doesn't fix it take it to an Apple store for evaluation. If it is defective they will replace it.

Why when I have my iPod on Wifi sync, iTunes pops up out of no where even though I'm not syncing my device?

I could have my iPod sitting on the table and I'm on Facebook and out of no where iTunes pops up. Even though I'm not syncing my iPod wirelessly. I just have it on the Wifi sync setting.

but when I select a category there are no words on the screen to choose a selection. the boxes to check are there, but no words!
That's usually a problem with the Segoe UI fonts on your system.
Vortical's suggestion in the following post is a bit of a sledgehammer approach, but it is usually quite effective on XP and Vista systems:
http://discussions.apple.com/message.jspa?messageID=12594070#12594070

Y did my iphone5 charger just stop working out of no where??!!!

rediculous!! i just got my iphone5 a month ago and ive already had more problems with the charger and battery life in a month then when i had an android phone! now out of no where my iphone5 charger has just a little bit of black stuff on the charger nothing will get rid of it!!

Can you upload a pic ? As with out seeing what your on about cant really diagnose your issue.....

Out of no where, voice over seems to have taken over my phone. can't enter password. how do I reset or turn off voice over?

Out of no where my phone suddenly showed enlarged numbers and letters. Voice Over has taken over the phone.
The phone is unresponsive when I try to enter the password to gain accesss to the phone. I can only power on and off and that does not stop Voice Over. Any ideas as to what could be wrong and how I correct it?

Greetings midgiesmom58,
Welcome to the Apple Support Communities!
I understand that VoiceOver is enabled on your iPhone and you are having a hard time turning it off. In this situation, I would recommend reading over the Managing Accessibility features using your device section in the attached article and use iTunes to help you disable VoiceOver.
Use Accessibility features in iOS - Apple Support
Cheers,
Joe

Trouble out of no where

Similar Messages

Maybe you are looking for