Trouble previewing photos shot with a Canon 20D in iMovie. Help please.
Hi out there. I have a photo library with images shot with two different digital cameras: Canon PowerShot 40 and Canon SRL 20D. For some reasons that I can't figure out, photos taken by the 20D can't be previewed most of the times. Please what's that simple thing I have to do. thanks
Honestly, I don't know what's going on. Perhaps someone will read your answers here and get an idea.
When you double-click one of those images in the timeline or clips pane, does the clips info box open? Is there anything strange there, compared to a photo that does preview properly?
Have you imported these images into iMovie with the Ken Burns effect turned on, then emptied the iMovie trash, and now the Preview window is black when you try to modify their settings? This is a known iMovie 6 bug, which you can read lots about here: http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#stillupdate If this is the case, you'll have to reimport those photos.
Similar Messages
-
Trouble previewing photos shot with a Canon 20D. Help please.
Hi out there. I have a photo library with images shot with two different digital cameras: Canon PowerShot 40 and Canon SRL 20D. For some reasons that I can't figure out, photos taken by the 20D can't be previewed. Please what's that simple thing I have to do. thanks
does iPhoto show all pics?
if not, something is wrong with the pictures ...
if iPhoto DO show all pics...:
the 20D has ~8Mpix resolution..
use any pic processor (or Apple's Preview), to downsize the res to 720x480 (if you don't do any KB effects...)
we read more&more reports, that iM has some 'trouble' with 'large scale' pics from these new digistills with a res beyond >5Mpix ... forum's mastermind Karl Petersen recommends to downsize them .. -
Movies shot with my Canon T2i playback in iPhoto '11 is jerkey
Movies shot with my Canon T2i DSLR playback seems very jerkey. It seems like it plays a few frames and suddenly skips one, then the process repeats. Anyone know of a way to resolve this?
I downloaded the same movie from my camera to my PC (running Windows 7) and it plays just fine!!
Is this a Quicktime issue? iPhoto issue? Mac issue?... Please help!iPhoto uses QuickTime to play the videos so that seems a likely culprit. Have you installed Perian?
Regards
TD -
Final Cut PRo and Canon 5d Mark II Help Please
Hey guys working with HD video I shot with the Canon 5D Mark II. In playback on the time line the video appears jumpy and sticks at transition point between two clips. However when I output to a movie everything is fine. Just annoying in the editing process. Thanks
Ray:
That cam I believe shoot h.264 video. That is a delivery format, not an editing format.
It needs to be converted to an HD editing format.
Try pro res or pro res HQ. Open the clips in the QT Pro player and export, or use Compressor. -
I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
I have followed the instructions but it still will not pair with my iMac!
Can anyone help please?
My iMac is 20 inch Mid 2007 OSX10.9.1 4GB RAMHi All, thank you for you suggestions. I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp> which mentions the keyboard being suitable for tablet or windows. No mention of iMac! although the box is branded to indicate Mac compatable.
I'm thinking that maybe it just will not pair with an iMac.
Ill keep looking for the maker website, which might come on later in the future? maybe?
thanks again. -
I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?
Have you signed out of your iTunes account on the device/computer that you are using and signed back in with the updated password ? That should 'refresh' the account on it, and you should be able to use the account's new password to download updates to its apps
-
previously i set up iphone 5 same user (account) with my brother.. Now i want to set up as my own User... but try to Erase all content n settings and plug in itunes to set up as a new iphone but it's keep sync with my brother phone ... help please ?
I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases. -
I cannot get .arw or jpeg files from my Sony A6000 to be taken into my Lightroom 4.4 via the normal "synchronise" process. I have updated my Pc to Adobe RAW/DNG 8.4 with no improvement. Can you help please?
With regards to your .arw files:
You need to either purchase and install Lightroom 5.4 -- OR -- download and install and use the FREE Adobe DNG Converter version 8.4, did you actually launch and use the DNG Converter?
There should be no problem importing JPG files into Lightroom from your camera, what happens when you try? Is there an error message? -
I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.
There's a new driver bundle for OSX 10.6 that you might need to install, the HP link seems to be failing at the moment but there's a version of it here: HP_Installer_Scanjet_v2.4.3_Ph4.dmg
There's a piece on the HP Forum about it here (some folks have problems installing ...)
http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/Scanner-Drivers-softw are-for-Snow-Leopard-Mac-OSX-10-6-will-not/td-p/2301674 -
Non-existent photos taking up 2.7 GB storage space -- help please!
My iPad 3 says, under Settings\General\Usage\Storage, that I have 2.7 GB in "Photos & Camera", and specifically 2.7 GB under "Camera Roll." I have deleted *everything* from Camera Roll manually -- there is nothing there. Yet it still is taking up 2.7 GB of storage and preventing me from installing apps.
I tried syncing it with iTunes on the computer and telling it to remove all photos; didn't work. I tried swiping to the right on "Camera Roll" in the Settings, which gives me the option to "Delete" -- which I click, and it does nothing (except freeze that icon so I can't swipe it anymore until I close or open settings -- let it sit for 2 hours once and it did nothing else). I've done everything but reset it to factory defaults.
I am not sure what caused it, but when I first got the iPad, I did tell it to sync a bunch of photos during initial setup. I then realized how much room they were taking up and promptly removed them (I don't remember if I did it manually or by a re-sync). But they are long gone, and the 2.7GB storage remains...
Can anyone help, please? Thank you!Restore. Note that it's not quick. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes. -
The mail application on my I-Mac dates all emails, in or out, as 5th (of whatever month it is). It seems to get the time right.
The computer clock is fine. I have no problem with my MacBook - just with the I-Mac. Any ideas, please?OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
my itouch scrren is frozen, it wont slide to unlock..i have done all that was adviced with the buttons but that didnt work..can anyone help please?
Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times. -
Issues with a email server migration - URGENT HELP PLEASE
Hi,
My online company uses TB and we recently changed our email server provider to resolve a serious problem we were having with the previous one. Both servers (old and new) are IMAP.
The problem is that since we have made this server migration we are having a lot of strange things happening on TB such as:
1. When I mark a email read I can no longer mark it as unread. I've tried to click on the little ball, to select 'Mark as unread' by clicking on the right side of the mouse, etc and nothing!
2. When I reply and forward an email the reply and forward arrow is not showing up so sometimes we don't know what emails have been done
3. Sometimes the emails are sent and don't show up in the sent folder. So we need to put our own email in BCC to be sure that they have been answered.
The guy who organised the server migration suggested us to move to outlook, but outlook is not resolving the problem either. On top of that it makes our computers as slow as snails. I'm on a free trial with outlook that will expire in two days and I want to go back to TB as I find it much easier and straight forward.
Has anyone have a similar issue? Can someone HELP please?
Many thanks in advance.item 2 see screenshots
No clue on other issues Just remember that your old e-mails are not on your new server. -
Because (for reasons which are not relevant to my questions): I can not reasonably migrate to the newest PSE Versions and I am more or less stuck for a couple of years to the use PSE V10. I am therefore looking for a relatively efficient solution to process/edit (a small percentage) of the RAW Files of my new/future camera(s) with the combination of PSE V10 and CR 6.4.1 (according to my understanding PSE V10 does not support CR 8.6 – PSE V10 does not even allow me to import RAW Files of new cameras into the PSE catalog).
I was hoping that the DNG Converter could be a good solution for me. I was intending
to convert the RAW Files of my new camera (and of my future new cameras) with an up-to-date version of the DNG converter,
import the .dng Files into PSE V10
and then look-at (and then for some few of them: edit) the DNG Files with the combination of PSE V10 and CR 6.4.1.
However, I got recently the impression, that the only Camera Profile of CR 6.4.1 that renders reasonably well the DNG Files of my new Canon Powershot G16 compact camera is the “Adobe Standard” Camera Profile. In my tests with the combination of PSE V10 and ACR 6.4.1, the rendering of these DNG Files with other CR 6.4.1 Profiles (e.g. the “Camera Faithful” Profile) is (regarding colors and brightness/contrast) really ugly and (for a non-expert like me) more or less unusable (while the rendering of the same DNG File with the “Camera Faithfull” Profile of the combination of CR 8.6 + PSE V13 is quite reasonable).
May I please ask the following questions to somebody who is familiar with DNG and CR?
Do my observations (i.e. ugly rendering of Canon Powershot G16 photos with the “Camera Faithful Profile” of ACR 6.4.1) correspond to what DNG experts should and are expecting?
What is the probable reason of the ugly rendering of the “Camera Faithful” Profile of CR 6.4.1? Does the DNG converter not include a G16-specific “Camera Faithful” profile in the DNG file?
Or do you think, that I made something wrong and that I am the one to blame for the ugly rendering with the “Camera Faithful” Profile used by CR 6.4.1? If that’s the case: what did I probably do wrong and what can I do better?
Do you think that with the combination of PSE V10 and CR 6.4.1, I will have similar problems with the DNG conversion of Raw files of future cameras like the follow-on to the Nikon D5300 or D7100 (which I will probably like to buy once available)? Or do you think that the problems that I encountered with the Powershot G16 photos are unlikely to happen with most other new camwras?A lot of thanks in advance for your answers.
In case you might wish to look at the typical rendering of one of my DNG Files (created with Version 8.6.0.254 of the DNG converter) of a Canon Powershot G16 .cr2 photo, I uploaded at https://www.dropbox.com/l/T3LJyZWkBZpcKkNe8S8ufr
following screenshots:
rendering with PSE V10 and CR 6.4.1 with the “Adobe Standard” Camera Profile” – looks OK
rendering with PSE V10 and CR 6.4.1 with the “Camera Faithful” Profile – looks ugly.
I did not create screenshots of the ugly rendering by CR 6.4.1 with other Camera Formats..
rendering with PSE V13 and CR 8.6 with the “Adobe Standard” Camera Profile – looks OK
rendering with PSE V13 and CR 8.6 with the “Camera Faithful” Profile – looks OK
screenshot of the unedited jpg. File created by the camera - looks OKThank You very much to all of You: in alphanumerical sequence to 99jon, to R Kelly and to ssprengel. You spoiled me with the Information in your answers. Thank You very much for it.
Based on your answers I will first try the probably simplest solution: the download of ACR 6.7.
If that will not work for me, I will try/investigate something else, that, if I interpret your suggestions correctly is the following: create with the combination of PSE 13 and ACR 8.6 profiles that I will try to use with the combination of PSE 10 and ACR 6.7 or 6.4. That is an idea that I was not at all aware of and that I owe to you.
All that is quite new to me, and I can therefore imagine that I will come back to you and ask for detailed suggestions or directions.
A Detail: it is on the same machine / same Windows-occurence that I have installed the combination of "PSE V10 + ACR 6.4" and the combination of "PSE V13 and ACR 8.6".
1) The main reason why I can not use for my main real-life "productive" PSE Catalog the combination of "PSE V13 and ACR 8.6" is the lack of Support of/by the 32-bit mode "KODAK Digital ROC Professional" Filter/Plug-in in a PSE V13 Environment. I need and will need that filter for a couple of years for the retouching/restoration of thousands scanned Versions of my old slides that have a strong color-cast. I am also using the 32-bit mode "Kodak Digital GEM Professional" Filter for a strong noise reduction in the scanned Versions of my old slides (but I can imagine, that I could find good 64-bit mode alternatives to the GEM Filter).
2) In addition I have with the V12 and V13 PSE Editors, for a lot of my photos files, problems with the wrong Dates/Times assigned by the V12/V13 PSE Editors to new file containing a new/edited version of my Foto files.....
But these 2 previous items are other stories/problems that I would like and shoud keep separate.
Thank You again for your wonderfull help.
Robert
Maybe you are looking for
-
Hey, I have a report created which accepts 3 parameters which are now defined as dropdowns. I needs to set up an automated job that passes the oracle report all combinations of these three parameters every night and saves the generated pdf in this ca
-
How to remove the complete ALE configuration for a given system
Hello everybody, Through ALE ,data is transferred between a number of SAP systems and the necessary ALE setups are in place. Now,a particular SAP system,which used to be a receivor to the central SAP system,is to be retired. Hence,the associated ALE
-
How do I cleanup the desk top?
How do I cleanup the desk top?
-
Table Refresh not showing correct data
Hi , Jdeveloper version 11.1.2.2.0 I am facing issue regarding data refresh on table whenever value changes in LOV. Here goes the usecase : Please not I m not using ViewLink ( as some constraint in my project.. this is a sample to replicate ) LOV to
-
Lightroom 4 Beta Download issue
I have OS X 10.7.2 and am trying to download LR4 beta. It gets about half way through then quits before it's finished downloading the 412mb file. I've tried downloading this about 4 times now to no avail. I used a really old machine of mine to downlo