Trouble printing a dashboard

Hi all,
I'm trying to print a dashboard and the trouble is that if the dashboard has, say 6 rows, when I print (or just preview), it will only show the first two rows of portlets.  It seems that it is making use of the browser's print capability, not P6's own print setup options.  By going into page setup, and zooming out to 50%, I was able to get a printout that wasn't cut off at the sides, but still only shows the first two rows of portlets, not all 6 rows.  Normally I would think this is just they way it works and it is limited here, but (and maybe I'm crazy) I thought a previous version (like back in version 5 or 6) you could print the entire dashboard.  Any comments would be helpful.  Anyone know of any workarounds?  Is this still the case in EPPM Rel 8.3 sp1?  Thanks! 

I posted a similar question back in October and no replys. I've found some success by using the "Convert To PDF" feature on the Internet Explorer Adobe Create Toolbar.

Similar Messages

  • I am having trouble printing to an Epson XP600.  It is a new printer and it has been replaced because we thought it was the printer.  Basically, when I print from Excel, only color will print.

    I am having trouble printing to an Epson XP600.  We have replaced the printer and we are still having the same problem.  When I try to print from Excel, only the color prints.  Any suggestions?

    Has anyone else had issues not being able to print black (such as a document)?  My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?

  • MS office 2008 now crashing when we try to print. No changes to computer; same old software. New printer 9 months ago, no trouble printing until last month. Other programs (adobe, mac) print fine. What can I try?

    I have an iMac from 2009. It's running OSX 10.6.8 and we've used MS Office 2008 for Mac all along without any trouble.  We replaced our printer 8 or 9 months ago, and we've had no trouble printing from any program until the last several weeks. Now, when we try to print ONLY from word or excel, the print window appears, but then the spinning rainbow comes up, followed by a Microsoft crash message: "Microsoft Word has encountered a problem and needs to close. We are sorry for the inconvenience." I tried to trick it into making a PDF, but the crash comes too fast. The only change to our entire Mac ecosystem is the following: We also have a Macbook Pro that has the 2nd allowed installation of the same MS Office 2008 for Mac. Due to liquid damage 6 weeks ago, that computer was replaced and all of the data and applications were moved from the dead one to the new one. Could this possibly be because microsoft detects a "third" computer "using" its software? I'm guessing no because I've seen several threads about problems similar to mine, and none mention licensing issues. In terms of troubleshooting, I've shut down, unplugged, restarted and tried newly created docs as well as old ones. Same results, no matter what.

    http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Trouble Printing with HP Officejet Pro 8500

    Hello - I recently changed my laptop and have a Windows 7.  I went online and downloaded the software and am able to do a test print page with the Print Doctor.  However, when i print from my laptop and select the correct printer, it doesn't do anything or respond with printing.  I was able to install and have it work with my old laptop, i just can't seem to work it on this one.
    Thank You

    Hi @Vanessasood,
    Thank you for visiting the HP Support Forums!  I understand you are having trouble printing to your HP Officejet Pro 8500 with your computer running the Windows 7 Operating system. I would love to get you up and running but require a little more information:
    1. What is the Exact model of HP OJ 8500 you are using as there a few in the series?
    2. Did you recently upgrade to Windows 7?
    3. How is the printer connected, USB or Wireless?
    4. Do you get any error message when you attempt to print?
    Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know what the PSDR finds, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • A user is having trouble printing. Print jobs take FOREVER when they used to speed through

    A user is having trouble printing. Print jobs take FOREVER when they used to speed through (despite linked images, etc)
    These are just some notes from our troubleshooting:
    User was trying to print out InDesign document however during the flattening phase, the computer would stall and would not print out the document.
    The document does not print out using double sided or single sided.
    The first time I went out, all I did was a system restore and uninstalled mcafee security plus because we're on a university network and sometimes the firewall blocks network printing, and that worked. She tried to print again later and it went back to taking 30 minutes for a print job of about 19 pages. These print jobs used to take about 5 minutes at the most to print entirely, but they queued up immediately, versus now, it takes about 5 minutes just to get to the printer.
    Further troubleshooting that I did on a separate day:
    Printer was printing fine in November - problem started at some point this month (December)
    Printing is fine elsewhere, including in Adobe Acrobat
    I was able to print one page just fine - it had no images (tried to print the same page later, took forever)
    Some of the images are very large (100MB+) photoshop files (again, they were there before and it printed fine) - these images are linked (with no link errors)
    She prints to a network printer, but there's no firewall on (again, printing is fine elsewhere)
    She's essentially printing with the default settings, she just centers her print, instead of the default layout.
    Now even printing with the default print set (not changing any print settings at all) doesn't work. Jobs take 30 minutes. I can't figure out if it's file specific or where the problem is. Since she has no custom settings, my next option is to just do an uninstall and reinstall, but I'm worried that the problem will still be there. I was starting to think that maybe the file is just so corrupted from all the force quits that that's causing the problem, but... I'm running out of solutions.
    Any help? 

    I have only worked doing layout for one business in my past. In that job our department would sometimes experience slowdown in printing from time to time. However, we began to see extreme slowdowns over a month period. It was finally tracked down to two things. One was something about the RAID array going bonkers. The other was some of the CAT cabling going bad. It only affected large print jobs and copying large files through the network. Even so, it was not 100% of the time. Sometimes things went along smoothly.
    Point is, have your IT people been invited in to experience the issue and see if anything in the network is causing at least latency issues?
    Take care, Mike

  • Having trouble printing over a home network to a Canon S9000 from iMac

    Hello there,
    I recently bought a iMac and am having trouble printing to my Canon S9000 over my home network. If I hook up the printer to the iMac I can print to it, but the PC that is also hooked up to the network can't. If the printer is hooked up to the PC, the PC can print to it, but the iMac can not.
    I downloaded the S9000 driver from Canon and installed it on the iMac. Then brought up the printer in system preferences. I found my printer OK, but I can't seem to find the S9000 driver in the list.
    When the printer is hooked up to the PC and I try to print to it from the iMac this is the error I get: "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred, eliminate the cause of the error."
    Any help is greatly appreciated!
    Thanks!

    Your problem is due to the way that Canon wrote the drivers for that printer. It can be shared to Windows machines if it is on a Windows machine, or to Macs if it is on a Mac. It can't be shared cross-platform. It is not supported by GutenPrint, so there is no CUPS system driver available; if there was, you could put it on the Windows machine and share it, and use the CUPS driver to print on your Mac.
    I'm sorry, but that printer will not ever be able to be shared cross-platform unless and until Canon rewrites the drivers. I'd not recommend holding your breath while waiting.
    The best solution to cross-platform printing is to get a network printer. Many vendors, including Brother, Canon, Epson, and HP, make them, some of them at fairly low (under $100) prices.

  • TS2634 I cannot print from my ipad. The wireless is connected, I have no trouble printing from my computer. When the ipad looks for the printer it comes back with the message. "Air printer not found" What can I do to correct this? P S Ipad2 is only 1 mont

    I cannot print from my ipad. It is connected to the wireless okay. I have only had this ipad for a month and while I am not sure I think it has been okay to print before 2 days ago, when I tried to print and I got the message "Airprinter not found" Has anyone experienced this and if so what did you do about it? I have no trouble printing from my computer.

    ... Has anyone experienced this and if so what did you do about it?
    I rebooted my Airport Extreme.
    Try rebooting your router. Make sure its firmware is updated.

  • Not able to print xcelsius dashboards from pdf files.

    FYI. In case this has you stumped on how to print your dashboards from Adobe pdf you are not alone.You may have noticed that it is not possible to print your dashboards from Adobe pdf documents.  It is not possible to actually print any active embedded flash document from an Adobe pdf document and this behaviour is by design. You can however print your dashboards if they are exported to other formats such as such as MS Word or MS Excel.  Xcelsius 2008 does include a 'Print' button which you can add to your dashboards to allow your users to print them.

    FYI. In case this has you stumped on how to print your dashboards from Adobe pdf you are not alone.You may have noticed that it is not possible to print your dashboards from Adobe pdf documents.  It is not possible to actually print any active embedded flash document from an Adobe pdf document and this behaviour is by design. You can however print your dashboards if they are exported to other formats such as such as MS Word or MS Excel.  Xcelsius 2008 does include a 'Print' button which you can add to your dashboards to allow your users to print them.

  • I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

    I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

    Hello,
    Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
    Regards,
    Nakul

  • Printing a Dashboard in pdf format with bigger font size ?

    Hi,
    When we are trying to print a Dashboard with few reports in pdf format, the font size seems to be very small in the print, and it is not readable.
    Is there a way where in we can make the pdf's print a bit larger?
    Thanks

    Yes, at last I managed to change the look and feel of the generated PDF, including the font.
    The attributes of all the objects that can be affected in the pdf output are kept in 2 .fst files: for general attributes in pdfstyle.fst and for pivottable attributes in pivot.pdf.
    These 2 files are present for every skin, like Oracle_10 and Siebel77.
    Try a global find and replace of 0.75pt to 4.0pt and 8pt to 20pt in pivot.fst. Save the file, restart the presentation server, log in again and try print to pdf of an existing pivot table. It will have thick borders and a big font.
    I still do not understand that the same attributes are kept in 2 different files. For a color-change it is necassary to change the file views.css and the .fst file(s).
    Good luck changing fonts and colors.
    Otte

  • Trouble printing a gradient in Illustrator CS3

    Hi Guys,
    I'm having trouble printing a gradient via color seperation on a ecrm MAKO 36 image setter...
    I've uploaded a file. The top light blue border(gradient) will not print. If I take the gradient off it will seperate with no problems.
    I've tried using the compatible gradient & mesh printer settings but it doesn't make any difference.
    Any help would be greatly appreciated.
    Thanks,
    Curtis

    I looked at the file and found strange things about it. It has two groups of object that only have one object or path in the group and in each case the object has clipping path that does absolutely nothing I would eliminate the clipping by selecting them in the layers panel and deleting using the trash can in the layers panel.
    I would select all the art and in the attributes panel I would make the overprint options for both Fills and strokes set as uncheck, which is what I thin is causing the problem as there is no reason for an overprint.

  • Trouble printing in Photoshop cs4 or lightroom 2

    Hello,
    I have a HP z3200 printer and I have successfully calibrated and profiled this paper but now I am having trouble printing. The profiling said he was successful and ready for use for applications to print, but when I use applications like Photoshop or Lightroom 2 in the print settings and try to choose the paper type under the Paper type/quality in the print dialog in Leopard mac, the settings is grayed out, and won't let me select it. THe loaded paper is right below and I have the source as Manual Feed. THe size im printing to is 13" x 19" and I have selected that size in the page setup, super b/a3 on sheet media. I am using the Epson Enhanced Matte 13" x 19".
    There are some errors in the Constraints & device status in the Paper type/quality section of the print settings; one says something like the selected paper type is not available in printer (which is like that because I cant select it because its grayed out) and also it says the paper size selected is too big for the loaded paper, which is says it's 12.94" x 19.01".
    Any idea what I'm doing wrong?
    Thanks!

    I finally figured it out. I did some googling and found that there is a problem with Leopard and how it communicates.
    Taken from HP's pdf:
    "Why is the paper preset that I have just created grayed-out in my Mac driver?
    In Mac OS X v10.5, when you try to select the paper preset that you have just created in your paper type list on the driver, it might be grayed-out. This is a problem of interaction between the color settings and the paper types in this operating system version. Just select Any in the paper type list of the driver, and the printer will work with the paper preset that you have selected in the front panel of your printer. "

  • Troubles printing to a networked HP printer!

    If you can see the networked HP printer but still nothing prints, or if you are thinking about buying an HP printer this weekend - you may be interested in the following HP link which lists the printers that can be successfully networked. I have been racking my brains for weeks to resolve this issue- could save you alot of time!
    Copy and paste- its very long!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00041866&cc=us&lc=en&dlc=en &product=1146332&dlc=en&lang=en
    Justin

    OK, I'm back.
    First, the good news.  We've consolidated the offices, and the 8500 in fact does work.
    But.
    The 8600 still doesn't.
    I have tried:
    Rebooting the router and computer.
    Changing the filter multicast value on the router so the filter multicast is now on.
    I re-set the connection to the network.
    I installed the drivers from the CD that came with the printer.
    Several of the folks who have moved to the new site are having trouble with this printer, so it isn't just me.
    To reiterate:  I can see the printer.  I can see it via a web connection.  I can see it via the HP Utility.  I can get the supply levels readout.  I can print diagnostics page from the utility.  But print jobs fail.  A print job connects to the printer, I can see a "low on ink" notificication, the printing supposedly starts, but it hangs at 1% complete.
    I think some of the new folks were having trouble printing from their windows machines, but I'll have to check tomorrow when everything settles down from the move.
    Carlisle

  • Trouble printing landscape PDF

    I am having difficulty printing a pdf document that is in a landscape orientation. The first page prints correctly, but subsequent pages either print lower and to the left on the page or they print in a reduced size and to the lower left. I am able to duplicate this issue in both Adobe Acrobat 11.0.05 as well as Adobe Reader. I do not have the issue if I print using Preview on Mac OS X. I am using Acrobat and Reader on Windows 7, 32 bit.

    Some of docs are not created by me but are available as studies on
    websites. On our docs, we import into InDesign. No, it does not print
    correctly if I select landscape rather than auto. And sometimes I select a
    page range to print and the command is ignored and prints the entire doc.
    Gayle Epp  |  Partner
    EJP Consulting Group, LLC  |  7 Greenough Avenue  |  Jamaica Plain, MA
    02130
    (617) 477-9319 (phone)  |  (866) 584-1256 (fax*)  *|  (617) 596-4756(cell)
    [email protected]
    www.ejpconsultinggroup.com
    From: rarainford [email protected]
    Sent: Monday, January 20, 2014 9:38 AM
    To: eppg
    Subject: Trouble printing landscape PDF
    Re: Trouble printing landscape PDF
    created by rarainford <http://forums.adobe.com/people/rarainford> in *Printing
    & Prepress* - View the full
    discussion<http://forums.adobe.com/message/6031443#6031443

  • I am having trouble printing  and am only getting part of the document which i have no margins set any help??

    i am having trouble printing  and am only getting part of the document  i have no margins set any help??

    What version of Pages?
    What Printer?
    If it is Pages '09, turn Comments off.
    Peter

Maybe you are looking for