Trouble printing directly from LR5 to Canon Pro1
Hi when I try printing directly from LR5 to my Canon Pro1 printer using 4x6 borderless, I get an undesirable border on 2 of the sides. How do I fix this? Thank You.
It's about 1/16th of an inch when I print 4x6. It doesn't do that when I use the Canon software to print. But when I use the Canon software the colors are off a lot.
I want to make bigger prints from LR5 after this issue is fixed.
Similar Messages
-
Printing directly from Canon camera
Can I print directly from Canon Powershot G12 camera to Photosmart 6510 printer
Hi,
Not DIRECTLY from the camera but you can always pull the memory card from the camera out and plug it to the printer or to your PC/laptop to print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Two sided printing directly from finder?
Hello all
I am having trouble with two-sided printing directly from the Finder on a shared printer over Airport.
I know that I can highlight a file in the finder, then hit CMD-P and it will print the document for me (opening up the program that created it - be it Pages or Word). I can select multiple files and print them this way.
What I *can't* do is get a two-sided document this way.
I have setup a preset for two-sided printing and set it as default. It doesn't matter what program created the document - it just won't duplex print. I have gone into CUPS and set the printer default as two-sided along the long edge.
My printer is a Brother HL-2240D, connected to an iMac running 10.6.8. I am attempting to print files from a Mac Pro (1,1) running 10.7.5, over my Airport network. I can print two-sided by opening the file in the word processor (Word or Pages) and using the Print dialogue, but I can't do it from the Finder.
Can anyone please help?I forgot to add - I have set up a duplex preset on the iMac (server) as well. I'm not sure if that makes a difference or not...
thanks! -
How can I print directly from my iPad to my new Primax 3260 printer when I have no computer? Do I need a portable one to one Router for the wiFi connection. My Internet is through Telstra 3G system.
Is your printer a wifi printer or hard wired only? If it's a wifi printer then you might want to look into third party apps like Print n Share or Print Central which allow a version of air printing to non-air print printers.
You may also want to look on the manufacturer's site. Maybe they have a fix for you.
If your printer isn't wifi, then you will need a router to get it on a wifi network to print to it. As far as I know, there is no support for the iPad to do wired printing. -
I am a new iPad (wi fi version) owner but not the new iPad 2. I have a home wireless network and have a HP Officejet J6480 wireless printer. I print from my iMac and Powerbook directly using the wireless network and want to print directly from my iPad also. Do I need a special app for this or can I do this with something already "built-in" to the operating system of the iPad.
Welcome to Apple Support Communities.
If you're comfortable going 'under the hood', this thread originally started in November 2010 contains a minor tweak to OS X that might work for you:
https://discussions.apple.com/thread/2658720?threadID=2658720&tstart=0
It allows devices on iOS 4.2 or newer to print to shared wired and wireless printers as long as the Mac is on and awake. -
How do I print directly from my iPad to wireless Brother air printer ?
We cannot print directly from ipad1. We have a new Brother pie print compatible (supposedly) printer, given as a gift, model MFCJ825DW. It prints nicely from my MacBook Pro through our home wifi network. The iPad, however, will not connect to the printer directly and print. I have to have the MacBook Pro running also in order to print, and then only through an app I bought off iTunes for $9.99. That app is very difficult to use as well (Pro Center...). Is there simply no way to connect an iPad 1 to print directly to this printer ? I have to take my Macbbk Pro to work, and this leaves my wife and the iPad unable to print. That was the main reason for getting the wireless printer! Am I going to have to buy an HP printer, and to they really allow you to print directly from an iPad? I have spent hours trying to solve this and have tried everything I could find, including Google cloud (unable to load Google Chrome on iPad), iPrint and Scan, etc. Can anyone help us out here, or are we just stuck with an Apple product and a printer we cannot effectively use?
Your printer is on the list of supported printers.
http://support.apple.com/kb/ht4356
So it should work. I have not used a brother, but the drill for other airprint printers is:
Make sure the printer is on the same wifi network.
From the printer console, check for and install any firmware update that is available. Almost all airprint devices need the firmware up date. Do the update from the printer, not your computer.
Reboot the pad. Recycle the router. If it still is not working, goto the brother support sire and see if there is a discussion there that can help you. -
I can't seem to print directly from apps like the new York times. Print is not an option from the pulldown menu. Print to my hp printer works fine from safari and email though and from some other apps. Do some apps not permit printing? That doesn't right.
sadie1 wrote:
Thats funny. If go to ny times on safari therebis a print icon and no problem printing. On the app -- and I am a paid subscriber -- no print option ...
You can ask the NY Times why not.
Standard behavior is that Airprint always works with iBooks, Mail, Photos, and Safari. Apps are up to their author.
http://support.apple.com/kb/ht4356 -
Is there any way to print directly from InDesign CS3 to Mavericks 10.9.4?
Are there any fixes or workarounds that allow me to print directly from InDesign CS3 to Mavericks 10.9.4. Everything I try now causes InDesign to freeze if I attempt to print. The only way is to export the file as a PDF. Thank you.
You shouldn’t be having a problem like that. I’m going to move this to the InDesign forum but it would help if you posted more details on the issues you’re having.
Another thing to try is exporting to INX from CS3 and opening the INX in CS5.5 -
after spending a full day and a half trying everything imaginable, i finally found a way to get my ipad to find my new airprint capable printer. I could print from email or the cloud, but not directly from my ipad. After reading a discussion about bluetooth printers, i turned off bluetooth in settings, waited 30 seconds, and voila!! I was able to print directly from my ipad. Try it if you are having troubles
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Printing directly from a mobile device that is NOT on a wifi network
I would like to print directly from an ipad, that does not connect to a home wifi connection.
I have read in some forums, that the HP 6520 can create a direct ad-hoc style wifi connection that the IOS device can connect to, but this is not clearly stated in the feature set on this website.
Can a support admin please clarify whether printing directly from a mobile device that is NOT connected to a shared wifi network is possible?Hi,
Pleae try the following setup:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02994632
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How can I print texts from iPhone4 to Canon MX870
How can I print texts from iPhone4 to Canon MX870
The following gives instructions. http://support.apple.com/kb/HT4517
Note that your carrier may not support it or may have added charges.
To use this feature, enable Personal Hotspot on your cellular data plan. Contact your carrier for information and pricing. -
i want to know that how can i print direct from my pc, and i also want to knw that can i directly print from my ios device.
To print from your PC, please check out the following iFelix article.
To print from an iOS device (iPhone, iPod Touch, or iPad), the printer must be AirPrint-ready. If the printer is not, another option would be to use something like.
Also you can check out this Apple Support article. -
B110 won't print directly from iPhone
I've posted on this before, but didn't get any help with the problem, so I'll try again.
Basically, one of my B110 printers will not print directly from any iPhone or iPad. All devices come up with 'no Airplay printers found' message.
Before anyone asks, yes, of course the printer is on the list of Airplay compatible printers, yes, it prints fine via eprint emails, and yes, I have followed the very limited (switch on and off type advice) from the Apple support site.
It is connected via the D-Link Powerline N type wireless devices.
Any help appreciated.
Thanks.Sorry to hear you are having issues with AirPrint! I found a document that should resolve your issue. Be sure to follow the article in order. Be sure to post back with your results so I know if this solved your issue. I hope this helps!
'The Printer is not Found,' 'No Printers Found,' or 'Printer is Offline' Message Displays on the iPa...
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Printing directly from the file to adobe createpdf online
I don't find the file created printing directly from the file to the adobe Createpdf online, and I don't also recive any E-mail as a confirmation of welldone work. Do I make a mistake?
Try the createPDF forum at http://forums.adobe.com/community/createpdf. This forum is for Acrobat.
-
I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?
Hello:
I must apologize . I should have checked here first:
http://support.apple.com/kb/HT3669#HP
According to the list, there is no driver for your printer included in OS X 10.7.
There are a couple of options:
1. Contact HP to see if they have a workaround.
2. If the model of printer is not listed but your printer is a PostScript printer or PCL Laser printer, try the "Generic PostScript" or "PCL Laser printer" drivers. Generic printer drivers may not let you access all the features of your printer.
I have not tried #2, but some people have had success.
Barry
Maybe you are looking for
-
Header text in Document type RE
Hi , I have activated the Header text in Docuemnt type 'RE' , While posting the MIRO , I am entering header text , still system not allowing to post the document ( below error message) For document type RE, an entry is required in field Doc. Hdr Tex
-
I was looking into buy a classic ipod but dosen't the video out put only work through the bottom of the ipod and i heard on the video cable to the new ipod instead of the cable having a yellow end it has a blue end for video my tv's only have a yello
-
Hello, Have you ever heard about somebody (or a company) that has developped some custom reports to improve OEM ? My need is that I want to extend the standard reporting, especially the performance follow-up (on metrics such as Buffer Cache Hit Ratio
-
I was SO happy to see this in the pref and added my own key combo. The problem is that when I execute this command, the sources appear in a NEW window, not the current one. My layout is 'All-in-one'. PLEASE tell me I can fix this.. thx Ralph
-
Hello every one, my name is mike and lately I have been getting the error code 36>=36 everytime reboot my phone. Since I have been receiving this code a few odd thing have been happening. For instance, my phone contact book, last night it just emptie