Trouble printing e-mail and web based pages

I have a Envy 4500 all in one. Can't print body of e-mails and some web based pages from myToshiba laptop. It will print fine from my I-Phone using e-print. Do I need to enable a setting somewhere?

Hi
Printing from websites is sometimes tricky. Have you tried using SmartPrint?
http://h41112.www4.hp.com/smartprint/us/en/smart.html?jumpid=ex_r602_ww/en/hho/ipg/xx-mu-aw_chev/sma...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Similar Messages

Why can i not print e mails and web sites such as ryan air?

Why can i not print e mails and information from web sites such as Ryan air? i need to check in on line but i cannot print
== URL of affected sites ==
http://

See this -
[http://kb.mozillazine.org/Problems_printing_web_pages]

Cannot Access Routers Web Based Page?

I have a wireless Linksys router Model WRT54G and it will not let me access my routers web based page. When I enter the default IP address into the Address Bar nothing happens (I've checked to make sure my router is on the default IP), i just get a blank screen, no pop-up or anything. Help?

Note that the router's "web pages" are built into the router. You do not need to be connected to the Internet to see them.
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

How can the DFF created for a PO form be used in PO web based page.

Hello,
I have created a DFF on the PO form using the attribute2 of the PO_HEADERS table. How can I create a DFF on the web page based 'buyer work center' page. My final goal is to use DFF for both the web based pages and forms.
Thanks for your help
Raj

hello Pradeep,
Whats the difference b/w DFF and custom DFF ?
I'll tell the steps what I did.
1. Application Developer > Flex Field > Descriptive > Register
Registered a DFF for PO_HEADERS_ALL table and used Attribute2.
2. Application Developer > Flex Field > Descriptive > Segments
So I used the DFF in the PO form. I want to see a DFF in the PO page also when the below navigation is used.
Purchasing: >Buyer Work Center>Orders. Opens a PO page.
Thanks for the help.
Raj

Mail and web server on same machine

hi to all,
i have jes 4 suite installed on the same machin: uwc runs on port 81 and 443 (secure) and mail can be accessed on:
https://mail.dom.com
I want to create a new web instance to host the web content. It will be access at:
http://www.dom.com
What needs to be done so that users do not access
https://www.dom.com as web mail
and http://mail.dom.com as web server?
thanks!
Linda.

What is on port 80 is the webserver that should host the website.
What is on port 81 is the webserver instance hosting the webmail. I installed a certificate and created a new LS so that users access the webmail through https. port 81 is firewalled.
There is no command called 'host' on Solaris. Actually the DNS admin will register www.dom.com and mail.dom.com to have the same IP since mail and web are installed on the same machine.
The server processes that exist should be the mail processes and the 2 web instances processes. the first instance should listen to port 443 and 81. The second instance should listen to port 80.
the urls that a user might type:
https://mail.dom.com
http://www.dom.com
http://mail.dom.com
the last url is what I want to change. Normally this should display the website. I don't want this result. I want to display the webmail page i.e. https://mail.dom.com. If this is not feasible, I want to display a page showing the 2 other urls.
thanks,

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Thanks for the reply. I'll have a look at your solution.

Why is mail on web based icloud so slow?

It takes forever to load mail on web based icloud.
Brent

same here takes forever so check mail online.
Waiting now over 10 minutes to check my mail......

Printer skips lines and enlarges font between web based pages.

'''bold text'''HP c7200 printer connected wirelessly to MacBookPro w/Lion. Using Firefox 9.0.1 browser. Printer prints first page just fine and then starts second page by skipping several lines and printing in larger font. PC also connected to same printer, and printer works OK. Safari works OK, too. Solutions would be appreciated.
Problem began prior to upgrading to Mac Lion. Lion has updated printer driver. Same problem. Only occurs when trying to print a web page or something downloaded from a web page, such as a financial spreadsheet. Non-web-based documents print OK. Help. Thanks.

I've seen this happen when the Page Setup on the FireFox browser was set to 80% (or probably anything less than 100%). Check that setting and change to 100% and reprint.

IE locks when printing to pdf from a web-based page or pdf

Acrobat 7 standard. IE 6 on XPPro64. It is a 64 bit machine and so printer drivers had to be obtained for 64 bit. When I try to print to "Adobe pdf", the current page out of a 200 page catalog being viewed online, IE locks up and the print job in the queue is unresponsive. It does this no mayyer the site or file being printed from. Other than this, Acrobat seems to work on on the 64 bit machine. Same thing if the page isn't a pdf but an ordinary html page. Printing to pdf hangs no matter what. Is this a known bug for 64 bit? It's at work, and the IT dept loves to mess with things, lock things etc, but I can't think how it could be related to that.

I think that the earliest version that has successfully run under X64 is AA8.1.2. I think that AA7 will not work on X64 as I recall the various reports of attempts by others to do that.

Authentication between Single Sign-On and Web based applications

Hi everyone,
I need to create a way in Portal 10g (10.1.2.0.2) that allow me to do the following:
Once the user is logged on Portal (against Single Sign-On - SSO) he doesn't need to retype his username/password when he access a web based application throught the portal, in my case, an ASP application (not .NET, just ASP).
I made a test creating a External Application in SSO and after publishing this portlet (external application) inside portal.
It worked, BUT I was prompted to inform username/password to log on the aplication.
So, the user end up entering his password twice.
Does anybody know a way to acomplish this task?
The documentation I'm researching is:
Oracle Application Server Single Sign-On
Administrator's Guide
10g Release 2 (10.1.2)
B14078-02
Oracle Application Server Single Sign-On
Security Guide
10g Release 2 (10.1.2)
B13999-03
Thank you very much,
Diogo Santos.

have figured out how to secure any HTML, ASP, PHP, CFM, etc. web page again Portal / OID using the PDK toolkit.
Using AJAX (Asynchronous JavaScript and XML) and one Oracle Stored Procedure just adding a simple Javascript call to any HTML, ASP, PHP, etc. web page can secure it via Oracle SSO (OID). Access to any secured web page will require that it to be linked from an authenticated Portal session or a page opened in an authenticated Portal session.
This process can be easily modified to add in group security etc. This is just my starting point.
1) Create a stored procedure
# Make sure it has access to portal.wwctx_api.is_logged_on
CREATE OR REPLACE PROCEDURE login_ajax_check (
display_error IN number default NULL) AS
BEGIN NULL;
If portal.wwctx_api.is_logged_on = false then
htp.prn('DENY');
ELSE
htp.prn('ALLOW');
END IF;
Exception when others then htp.p('DENY');
END;
2) Use this Javascript in any page you wish to secure.
<-- Begin Paste Here -->
<script>
var allowgo=2
function ajaxCallRemotePage(url)
if (window.XMLHttpRequest)
// Non-IE browsers
req = new XMLHttpRequest();
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send(null);
else if (window.ActiveXObject)
// IE
req = new ActiveXObject("Msxml2.XMLHTTP");
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send();
else
return; // Navigateur non compatible
// process the return of the "ajaxCallRemotePage"
function CheckPortal()
ajaxCallRemotePage('[Your page calling the procedure from above]');
function processStateChange()
if (req.readyState == 4)
if (req.status == 200)
if (req.responseText.substring(0,4) == 'ALLO')
allowgo = 0;
else
allowgo = 1;
function doPage()
if (allowgo==1)
window.location='[Your login or error page]';
CheckPortal();
doPage();
</script>
<-- End Paste Here -->
That's it!!! Super easy. It works great too.
Larry Schenavar
[email protected]

Error accessing Infoview and web-based Administration Console

Post Author: rsir
CA Forum: WebIntelligence Reporting
After installing Business Objects 6.5.1 with SP3 in a single server as a primary node, everything works fine, except for the InfoView (wiasp) interface and the web/based administration interface (wiadmin). We've investigated in the BusinessObjects support site and in many forums about the problem and tried every single possible solution in order to correct the problem, without success.
The system we're working on is this:
Server model: Hewlett-Packard BLADE series BL 460C
OS: Windows 2003 SP1
Web Server platform: IIS6
What happens is that when we try to log in to infoview in the welcome screen, the url changes to:
http://(servername)/wiasp/scripts/login/webiStart.asp
And it displays the "The page cannot be displayed" error.
Also, when trying to log in to the web-based administration console (the client version works fine), it displays this error:
"The system is not started (Error: ADC 00071)"
We've tryed enabling parent paths in the IIS, redeploying the cluster node throught the configuration tool, checking the web extensions to be allowed, etc. without success.
Thank you very much in advace for any help.
Roderic Sir

Post Author: sarika_us
CA Forum: WebIntelligence Reporting
Hi,
I am facing the same problem. Could you please tell me how you resolved it.

Running Opera, flickr, teashark and web based apps...

I am unable to run web based applications like opera mini flickr cellity Teashark and others.
Whereas opera,flickr are some inbuilt apps but still unable to access internet through them.
Internet accessing is fine via default browser but none of the web browsers like Opera mini, Teashark,etc are not working.
Its not the problem of Network since on my other mobiles, apps run fine.
Please reply with the solution for the problem so that i can access web via web based Java Apps.
Message Edited by aparichit on 11-Oct-2008 12:49 PM

m so sry my net connection was nt working so couldn't reply
ok so here is step by step procedure:
Menu->Settings->Configuration->Personal config. sett->Options->Add New->Access Point:
now what you hav to do here is dat basically you need to know the access point of the setting you want to use key in the access point there. user name and password are nt needed usually.
save that access point and go back to the configuration page nw in 'preferred access pt.' set dat access point which you created just nw.
this process worked for me mayb this works for you all too. (i've presumed dat you all have got your internet services activated from your provider)
if you don't knw the name of your access point then your operator's customer care centre could be of some help..
Was this post of some help? Click 'Kudos' star on the right hand side of this post. Your gesture will be highly appreciated!

Can't send mail with web based email (ipad)

My son is trying to set up his work based website email to his ipad home screen so he can directly send and receive emails.
He has set it up and he can receive emails but he can't send emails.
His web based mail (Mr Site) does not have an outgoing SMTP server and I have contacted BT who were less than helpful, he just said to use mail.btinternet.com but he still can't get it to work.
Any ideas please?

lavenderjade wrote:
My son is trying to set up his work based website email to his ipad home screen so he can directly send and receive emails.
He has set it up and he can receive emails but he can't send emails.
His web based mail (Mr Site) does not have an outgoing SMTP server and I have contacted BT who were less than helpful, he just said to use mail.btinternet.com but he still can't get it to work.
Any ideas please?
Hi. Welcome to the forums.
He will need to go through something called address verification using his BTinternet email address. See my shortcuts, option 0e. IN essence it needs the work email account associated with a BTinternet email address, then in his iPad mail client (or indeed via BTYahoo! webmail) he should be able to send emails "From" the non BTinternet account. Webmail is easy, but in a mail client it needs extra steps to get the smtp area correct.
If he doesn't have a BTinternet email address, then he will need one - which can be a sub account off of your primary.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Signatures in Mail have mail and web links...attachment???

I have several email signatures but all have a link for my email and web address.
Why do the recipients get me the signatures as attachments and not how it appears on my composed email?
MCi

From the Mail menu bar, select
Mail ▹ Preferences... ▹ Signatures
Drag the signatures to each of the desired accounts in the list on the left. If you want one to be the default signature added to all messages sent from that account, select the account, and then select from the Choose Signature menu at the bottom of the dialog.

E-mail and Web Browser Programs

After a year of using my Blackberry Curve 8330 on the Sprint network, I think that I have uncovered most of the flaws in this machine and its software. With another year to go on my contract, I'm looking for some software advice/alternatives to help make the next year more tolerable. I find the e-mail and browser programs that come standard on this dumbphone to be just a step or two below dreadful. I'm very disappointed that Blackberry does not include better software with their phones!
When I go to a website or get an e-mail with photos either in it or attached to it, all I get are a bunch of empty boxes with some gibberish text inside them. I'd like to find a browser that will show websites the same way that they are displayed on my laptop and an e-mail program that will automatically display any .jpg or .pdf files that are in or attached to my e-mails. Can anyone suggest programs that will do these very basic things? Free or reasonably-priced programs would be great.
Thanks, jgreyone

Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Trouble printing e-mail and web based pages

Similar Messages

Maybe you are looking for