Trouble printing with Epson 2880 and SL

Installed SL on my MBP but not my iMac yet as it is my main computer for printing with Aperture. I have been very happy with the 2880 and how well the prints match what I see on the screen (calibrated with i1d2). Well with SL I downloaded rosetta and the new 2880 drivers (as instructed by Epson), but whenever I choose a paper profile e.g., Premium Photo Glossy, the picture in Aperture Print Pane turns a purple hue. I, of course, have color management turned off in the Print Settings dialog. Anyone have any idea what is going on? As far as I can tell I'm not doing anything differently. More importantly, has anyone been able to get good photo printing with SL, Aperture and the new Epson drivers for the 2880 or similar Epson printer?
Thanks, Jim

That KB article just saved me from going back to 10.5. I was having the same purple problem with all Ilford and Hahnemuhle profiles.
That problem is now gone (by just disabling Black Point Compensation) but: when trying to print from Aperture (2.1.4) with my R2880, any paper I choose is apparently stuck at +roll paper+, giving a +wrong source+ error when it reaches the printer. I now have to hit preview, select the correct page setup and profile and print from there. So far this seems to work. But it's a pain and not what I want to be stuck doing for very long.
I had this problem before but only when printing to Manual-Roll. Now even Sheet Feeder options don't work. This would all be fixed if we only had a proper Page Setup option in Aperture as in every other OS X application...
At least that convoluted method gives me the right colors - which I was definitely not getting by going the system managed route.
Growing pains anyone?

Similar Messages

Trouble with Epson 2880 and SL

Installed SL on my MBP but not my iMac yet as it is my main computer for printing with Aperture. I have been very happy with the 2880 and how well the prints match what I see on the screen (calibrated with i1d2). Well with SL I downloaded rosetta and the new 2880 drivers but whenever I choose a paper profile e.g., Premium Photo Glossy, the picture in Aperture Print Pane turns a purple hue. I, of course, have color management turned off in the Print Settings dialog. Anyone have any idea what is going on? As far as I can tell Im' not doing anything differently. More importantly, has anyone been able to get good photo printing with SL, Aperture and the new Epson drivers for the 2880 or similar Epson printer?
Thanks, Jim

Hi--
Check to see if Black Point Compensation is checked; if it is uncheck it and see if the purple hue disappears.
I have the older Epson Stylus Photo 2200; do you know if the drivers for the 2880 work with the 2200?
thx
PP

Problem printing with Epson 3800 and Photoshop CS5

I came across a problem trying to print with my Epson 3800 in Photoshop CS5. I recently upgraded to Photoshop CS 5 (and Lightroom 3). I tried to print using my Epson 3800 with CS5 but could not adjust Print Settings, Color Mamagement, Paper Configuration, Expand Border because those options are unavailable and there is a line crossing through them. I get a message that says "The bundle 'Print Setting' could not be loaded because it does not contain a version for the current architecture". It then says to contact the creator listed here for the latest version: PrintSetting version 3.57, Copyright SEIKO EPSON CRP 2001-2006. I can print through Photoshop CS4 as usual, but CS5 is a problem. I haven't tried printing though Lightroom 3 yet, and have not typically used Lightroom to print, but I wonder if that will be a problem too?
Any help will be appreciated.

If you run CS5 or LR as a 32bit application you will have all these option available to you. You can then save these options as presets that can then be applied when you are running the applications in 64bit mode even if you can not access them individually.
Also you might want to check Epson's download site especially the European site to see if there are newer drivers or updates for your printer. The newest drivers for other printers like the 7600/9600 support application running in 64bit mode.
Doyle

Printing with Epson 2200 and Lightroom v1.3.1

Ever since installing Leopard and Lightroom v1.3.1 in my PowerMac G5, my Epson 2200 printer produces prints with a very significant magenta cast. Does anyone know of this problem or, better yet, does anyone know how to solve this problem?
Thank you in advance.

I loaded file 11832 from epson us site. This driver v3.0aAs is for v10.4.4 - 10.4.x intel based macs. Even though it's not for leopard? I did this as nothing else work prior for LR. I also downloaded easyprint v3.1bA. I set it to managed by printer then hit print, at this point I set color sync on the pull down tab along with checking the rest of that printer menu such as paper type i.e. glossy profile and the mode to advanced print quality 1440 with the high speed box unchecked. The rendering intent is perceptual & print res at 360 dpi. The print output is at acceptable than most of what I had prior which was lack luster. I did base my start point for LR from the LR book by Scott Kelby. I think the output can be tweaked a bit which is my next endeavor. This did work so I hope that this help's.

Printing with Epson 2880 after Apple Software Update of Epson Drivers

I'm wondering if anyone else has noticed the loss of "Print Settings and Color Management" controls in the print dialogue when printing from Lightroom or Photoshop after the recent Driver Update (which appeared in Software Update.) Prior to the Update which I had been avoiding until it came down when I updated iTunes (again, Software Update) all print options were available with the Epson software. Oddly, if you elect allowing the printer to control the output the color and color settings are available but if you set the (Lightroom or Photoshop) dialogue to the paper profile then the color and color settings are grayed out. I talked at length with both Epson Tech support and went through the drill of removing and installing the printer and installing the newest drivers (from Epson) and nothing changed. I talked with Apple and again, nothing changed inspite of various adjustments. This is just a little disturbing since I do a considerable amount of photo printing.
Any thoughts or opinions would be appreciated.

I'm going to make an additional comment to my question and that is, strange as the behavior is, this may be a normal function with the update. Although during my roughly hour talk with Epson tech support, the rep was not aware and gave me reason to believe what was (not) happening in the software was in fact wrong. Clearly, the new print dialogue with it's grayed out settings is different from the previous print dialogue and print settings. If you now use a paper profile - regardless of manufacturer - the software assumes you are going to turn off color management - which is absolutely correct. Although I have not tried it, I am led to believe from some material I found deep in Epson's Support, the "color" area in the print dialogue no longer permits electing printing in "advanced" Black and White. More correctly, inorder not to have B&W grayed out you must be using glossy paper and the correct black ink cartridge is in the printer. This isn't a bad idea but sometimes I find the image is better with a Matte paper. Obviously you can, and I have, printed in B&W - you just have to be aware that within the Color settings of the print dialogue you no longer have the "option" to select B&W or advanced B&W. In some strange ways the new dialogue and settings areas of the Apple print menu for the Epson printers is simpler but it does come as a surprise when you first struggle with the changes.
Message was edited by: PeterinKY

Trouble Printing with Epson RX700

Loaded 10.6 and new Epson drivers. Rx700 has front and back paper trays. Word and Excel printed to the front try, but Safari would only print to back try, regardless of setting. 10.6.1 allowed me to print to front tray, but it seems like the system default is to the rear, regardless of how setup is set. Even if setup says the front tray is selected, you must still select it again when printing, or documents are sent to back. Epson says it's an Apple issue. Anyone solved this problem?

Same issues here on my MacPro Tower running Snow Leopard 10.6.2. Wasted several hours on the phone with Epson. Their tech support for Apple Mac has gone downhill in the past several years. I've owned about FIVE Epson inkjets, so I know. Phone support is outsourced to some other country, after wasting an hour on a horrible connection to who knows where, the level #1 tech support finally gave me tech level #2, who was more aware of the driver issues, to which I suggested they all SHARE their notes so as NOT to waste anyone else's time.
First sign of DUMB, is the supposed "Snow Leopard" combo driver package offered on the Epson site. Listed as 70 mb's, it's less then 50 mb's, misinformation begins. Look closely ALL the packages are simply the drivers and scanner apps from 2-3 years ago, those ones worked under TIGER OS, and are certainly NOT updated for Snow Leopard. Now let's get really DUMB, and when you mount the "combo" disk image, you find a package installer that is a PPC app! The online docs say this updater is for you "INTEL" mac. Granted some PPC apps will run, this one for me was a HUGE problem. Opening multiple windows, unable to even click in the duplicate boxes to type my password to proceed. Why Epson is still using VISE installers that were horrible under OS9, terrible under TIGER, is beyond me. This combo package offers NO choices and begins to install the outdated freebie software from Epson, when what I wanted to do was upgrade the print drivers.
So heres the deal, you can D/L the OLD 3.01 drivers separately from the same site page, but ALL the real print options are "crossed out", which means to me, NOT compatible, and rendering the EXPENSIVE RX700 printer USELESS.
So I ended up downloading the Apple Epson drivers using "Software Update". Now you end up with driver version 8.0.7. This stumped the wonderful Epson support staff, since they said they don't write the "apple epson drivers", but this driver gives you back the drop down for the actual printer settings. And the phone techie ended up putting me on hold about four times, and then said she was told I should stick to that driver by someone higher up in support. Go figure, the Apple driver is better, but the BUG reported here, is making it less then ideal.
If I try to print out a photo in Preview, the printer gives me the error message "No Paper in Back". I have to DELETE the print job and most of the time restart the printer as well. Epson had NO clue about it, and since Snow Leopard has been out for sometime I don't expect much relief, though I do urge folks to call them and report it otherwise we may NEVER see another driver as they are still pushing the several years old ones we had before. Not sure I'll buy anymore Epson printers, they mostly cater to the Windows buyers now, just like Sony. Epson Tech support phone number: 562-276-4382. Good luck to all, we'll need it.

Printing with epson r1900 and cc photoshop

I have just purchased a new windows 8 computer and have cc photoshop installed. when trying to print with my epson r1900, the only print options available are landscape or portrait and paper size letter or a4. has anyone else had this problem and if so, how did you solve it.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=94511&infoType=Downloads&plat form=OSF_W_8-32

Dunning letters printing with zero balance and no invoice listing

How to trouble shoot 'Dunning letters printing with zero balance and no invoice listing' problem

As per my understanding it could be due to OB22 settings.
refer following SAP notes
335608,191927,
373296

Troubles printing with networked printers

I have a printer connected to a Mac Mini (with Leopard installed) and am trying to send something to print from my G5. The computer sees the printer but it always comes back saying "com.apple.print.recoverable-warning". Apparently it is having trouble communicating with the printer. The computers are connected through a wireless connection using a airport extreme base station. The printer is physically connected to the Mini since the usb has a external drive connected to it. There are no problems printing from the Mini but only when trying to do it from another computer on the network.
Anyone have any suggestions?
Thanks,
D.J.

I get the same message (com.apple.print.recoverable-warning), but my printer is on, plugged in to a USB hub which is plugged into the TC. I've re-started the printer, plugged it directly into the TC USB port, added it as a new TC printer to my printer list and selected it, but no change. I'm about to give up on shared printing with the TC and just plug the printer back into one of my Macs.
Anyone have any other ideas? (Despite high hopes, the new Airport Utility update did nothing for me.)

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

PDFs printing with black background and white text.

For some reason some of our PDF's have been printing with black backgrounds and white text, even though they appear to be normal on the screen before they are printed. I haven't been able to confirm 100% yet but it appears to only be happening with pdfs that were created from scanned documents.
Can somebody please offer me some suggestions.

Absolutely agree with the original poster. I find white text on black background so very very difficult (I changed from using Tweetbot on iOS to Tweetlogix for this very reason) and it physically hurts my eyes to try to read it. I can just about manage with Spotify using white text on a black background on the large screen of my MacBook Pro - and I do mean "just" - but for the smaller screen of my iPhone 5 it is just impossible. Even with a retina screen such as that on the iPhone 5S there is a strange ghosting effect and it gives me a headache to look at it for too long.
This may be something to do with age! I suspect most app developers are youngsters with almost perfect eyesight, but for those of us whose eyesight is less than perfect, this white text on black background really is so very difficult.
I know there is a workaround in setting the iPhone to invert ALL colours (under Accessibility in Settings) but it's a real pain to have to keep altering this setting every time I want to open or close Spotify, and it doesn't look right anyway. iOS7 is supposed to be a light, bright, easy to read OS - sadly this new Spotify app is the opposite of that.
Please would Spotify consider adding a simple light or dark theme option, so that those of us who want it can have our much easier to read light background back again, with grey or black text? It would be a great help to those of us who have eyesight problems.
If not, I may have to cancel my Spotify Premium account and move to Deezer instead, as I mainly use Spotify when out and about in the car, so am using the iOS app a lot.
Thank you for considering this plea!

Problems with borderless printing with iPhoto '08 and HP Photosmart Printer

I am trying to print borderless 4x6 photos on HP Photosmart C6250 (same as all HP C62xx Photosmart printers). I am using the HP 4x6 photo paper with the perforated tab. When I select the paper size, I specify Borderless 4x6 in/10 x15 cm (tab). According to the printer manual, the tab should be facing out. I have tried printing with tab out and the tab in. With tab in, it printed the picture leaving white space at the other end equal to length of tab. With tab out as printer specified, it left a white gap at beginning of photo (not as wide as tab) and printed the photo over the perforated tab.
Anyone else figured out how to print using the 4x6 paper with tabs. I also tried printing from the HP software included with the printer and it has issues, too. So, it might be an HP problem, or is it maybe a Mac printing issue with this printer.
Thanks for any help!
Barbara

Barbara:
This is a shot in the dark but take a look at the following topic. It might just help. As they say, any port in a storm.
Topic : iphoto won't print properly to HP photosmart
It does seem like a bizarre solution however. Good luck.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Cannot print with Cannon LBP5000 and Timecapsule

So I've read that the Cannon LBP5000 is not compatible after all with Time Capsule. Due to the CAPT Driver being bi-directional. I do not accept this as a resolution and feel that Apple cannot simply push this aside. My reason for that is this.
I was printing fine, with both my MBP and Air via a USB cable to my Cannon LBP5000 - great.
I then decided to go wireless printing. And bought a HP 2101nw print server for £30. I could then print wirelessly - fab!
I then decided to upgrade my MBP to Lion. I then could no longer print on that machine. Air still fine - pants.
I then had to (for other support reasons) upgrade my Air to Lion, to fix something else. I could no longer print from their either - bugger.
After much passing of bucks and research, I found out the HP 2101nw driver is not Lion compatible, nor do Apple or HP have any intention of fixing that. I was told to discard that wireless print server for something compatible with Lion - cheers.
I then bought a 2TB TimeCapsule. And found I couldnt print from that either for the lame reason I quoted at the start.
If this print worked wirelessley with a £30 print server on Snow Lepoard, why is it acceptable for it to not work on a £249 device. The printer hasnt changed, but it seemed a £30 solution is able to handle this 'Bi-Directional' impediment where the mighty TimeCapsule gives up.
What a load of tosh - really, really unimpressed Apple. Take ownership and responsiblity for something for once and fix the exceptionally painful transistion you pushed us through with Lion.

Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
From: Sara.Forsberg <[email protected]>
To: Verla Adams <[email protected]>
Sent: Thursday, April 16, 2015 7:28 PM
Subject: all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Trouble Printing with CS4 and Epson

I wish to print a 13x19 photo on my Epson Photo Stylus R3000. After entering all the info correctly with paper size, type, quality, etc I get a print with a one inch blank border on the top and bottom. I called Epson and they said it was not their problem, it must be something with Adobe. I am using Photoshop CS4 and Windows 7. Help, please. Doro

So, I found this little piece of info on Epson's site, the question doesn't quite match our problem, but the answer (you would think) would fix us...
Q: I don’t see my printer driver on the Epson Macintosh Snow Leopard Support page. Where can I find a Mac OS 10.6.x driver for my product?
A: Try the following:
Rosetta needs to be installed in Snow Leopard. If necessary, install Rosetta.
Go to Drivers & Support, select your product category, then select your product name.
Select Drivers & Downloads, then select Macintosh Operating Systems from the drop-down list and click Go.
Download the Macintosh 10.5.x drivers for your product.
Note: If there are no Macintosh OS X 10.5.x drivers available for your product, download and install the Macintosh OS X 10.4.x drivers and the Common Updater software for your product.
Follow the on screen instructions to finish the driver installation.
I followed the instructions to the letter.... no results, I still don't see the driver in the drop-down list of available Printer Drivers!

Trouble printing with Epson 2880 and SL

Similar Messages

Maybe you are looking for