Trouble publishing dashboards

I am attempting to publish dashboards through my Dreamweaver-built web-site. When I preview the site through Dreamweaver using Firefox, I can see the Dashboards.
When I actually go through the web, the Dashboards cannot be seen.
Here is my dashboard-less homepage. There should be two small dashboards on the right hand column above the links. Then when you follow the links, you should be able to see the dashboard very big on a new page.
http://www.otrscorecard.com/index.cfm
Any ideas why the dashboards cannot be seen?

No- there are two Xcelsius dashboards on the right hand side of thr web-page.
Also when you click on a link, another page pops up with a large Xcelsius dashboard displayed.
Everything seems to work when I pre-view the site in Dreamwaever, but not when I view from the web.
Maybe a Dreamweaver problem?

Similar Messages

Publish dashboard pages 11.1.1.5

Hi, I'm running in to an issue I haven't been able to resolve.
I've created personal dashboard pages that are linked to personal analysis, personal prompts, filters, etc. According to the OBIEE documentation, if I go into one of my personal dashboard pages, I can choose to publish that to a shared dashboard. According to the documentation this should not only publish the dashboard page, but also make shared copies of the personal reports, prompts, filters.
However, when we try that, I'm not seeing that behavior. It does look like it's publishing the dashboard page - but the objects on it are still pointing at my personal stuff - they haven't been copied in to the shared location anywhere.
Does anyone have a work around for this?
Thanks,
Scott

No errors being throw. Yes, I've followed what I can find of Oracle documentation, which states (page 4-17 of the OBIEE 11.1.1.5 Users Guide):
Publishing Dashboard Pages
You can publish a dashboard page to a shared dashboard location so that you can
share the page with others.
When you publish a dashboard page:
■ Personal content (such as analyses, prompts, and so on) is copied to a destination
location that you specify and references updated as appropriate.
■ References to shared content are retained.
But I'm completely NOT seeing that personal content is being copied to the destination location....
Thanks,
Scott

Publish - Dashboard to BI Launchpad

Hi experts,
My dashboard (4.0) based on an BEx-Query and is published to SAP BW. Is there a way to publish this dashboard to the BI Launchpad with the same connection -> Prompts und reading data from BW? or is it possible to create an url to the published dashboard in BW
br Otto

Hi Otto,
BICS-based dashboards currently cannot be published to BI 4.0 Enterprise Platform. They still must be hosted in NW. There are plans to have the functionality available in the near future.
You can give url to the published dashboard in BW.
Please refer below thread for details.
[http://forums.sdn.sap.com/thread.jspa?threadID=2002994]
Hope it helps.
Regards,
Nikhil Joy

30 mins flight recording shows 1 hour 30 mins in published dashboard of Java mission control

Hi,
We are facing some issue during flight recording using Java Mission Control (version: 5.4.0 (M5.4.0-102, 162463)).We have set flight recording interval for 30 mins in java mission control. But after completion, it showed 1 hour 30 mins in published dashboard. Though the flight recording has been completed within 30 mins. The issue is happened for 15 mins,20 mins flight recording also.
In published dashboard, some extra time has been added before starting of actual test.
Because of this extra time, we are bemuse to find out the actual result.
Please help us.
Thanks
Debraj

Hi,
Sorry for late reply.
We are doing flight recording for OSB performance testing.
We have followed below steps during testing
a. Disabled all the services.
b. Then we start flight recording.
c. After 20 seconds gap we are enabling the services to poll data.
but after completion of flight recording it is showing wrong time interval in dashboard.
Regards,
Debraj

Trouble publishing Quicktime mov on Intel Mac

Using Flash 8, Quicktime Pro 7.1.3, System 10.4.6 on Intel
Mac 24" iMac
I clicked the "enable Flash tracks" button in Quicktime
preferences, but I still get the "missing Quicktime component"
messege when trying to publish a mov file. Restarted, re-installed,
etc., but no luck. I'm able to import SFW into Quicktime and
convert to MOV, but not export from Flash.
Another poster was having trouble with the same thing and
thought it might be an Intel Mac bug, so I'm just wondering if
someone with a similar set-up can verify that they're able to
publish MOV files.
Thanks,
Randy

None that are Mac/Intel compatible yet.
http://www.popwire.com/productinfo.php?cPath=1&productsid=7&osCsid=b7f5f02a6fdf4553e4bdd3c5cb981b93
http://www.flip4mac.com/knowledge/kb_0057.htm

Publishing Dashboard into bw -- All labels in spreadsheet gone

Hi experts,
during publishing the xcelsius dashboard into the NW Environment, the SWF generation stops without any error message. Sometimes the message "Publish failed" appears (contains no error ID).
After that, ALL labels in the spreadsheet are gone. Instead of the labels the cells only contain ' #VALUE '.
The dashboard is useless then.
I can work hours with this dashboard and publish it a couple of times. Everything is fine and works as designed. But then, whyever, it deletes the labels. It happened three times, very frustrating.
Xcelsius Enterprise SP3.3
Connectiontype: SAP NW BW-Connection
Win XP & Office 2007 with latest patches
flash 10,1,85,3
Does anyone know about this issue and how to fix it?
Best regards,
Dennis

Hi David,
Thank you very much for sharing this information.
Our connections are BICS only, not via BOE. However, you are dead-on with the size of the dashboard. It is very big, with a lot of cells (20'000+), and lookups, and xTree components.
We sometimes have the "publish failed" message, and it could well be related to the corruption error.
We have had the issue also with one smaller dashboard, though.
SAP has advised to clear the portal cache (to remove possible inconsistencies in meta data), and to upgrade to Xcelsius 3.4.
We cleared the cache, but the corrupted dashboard did of course not come back.
We are currently running 3.1, and as we do not have a package for 3.4 yet (we are in a centrally maintained environment), we would like to avoid manual upgrades. For two days, the issue has not occured. We will keep an eye on it, and upgrade if the error returns. I will keep you posted.
Cheers
Frank

BI Publisher Dashboard

Hi all,
Can any one tell me is there any separate component available for Dashboard in BI Publsiher.Need some information about the dashboard
I'll be grateful if any one can share some documents or links for the same.My email id is [email protected]
Edited by: user11282163 on Aug 12, 2009 9:37 PM

Do your reports bring back a huge amount of data? Per the BI Publisher Report Designer's guide:
BI Publisher layouts are best suited for reports of simple to medium complexity that do not require custom coding.
For enabling interactive sorting and filtering, the complete data set that is passed to the layout should be limited to several thousand rows to achieve a responsive report.
Thanks,
Bipuser

Trouble publishing an album on MobileMe - Help requested

I have Aperture 2.1.3 and I have been trying to upload images to an MobileMe album. Every time I select the images and create a new MobileMe album, the activity window shows the publishing in progress and suddenly goes to 100%. problem is the upload is too quick and that is what gave me my suspicions.
I have tried it a number of times now and same result each time. When I click into the webpage, the album is there but without images. I have a number of albums on the site and first time I have had an issue.
Anybody throw any light on my problem? Am I missing something?
Help appreciated.
C

When you create a new MobileMe Album you should get an option to either load a single image or all the images. Make sure that there are images in the MobileMe Album if there is not then simply drag an image into the Album and perform a sync. Then logon to your account in MobileMe and check that the Album has been created. If none of that works delete the Album and start again. Cheers Ant..

Trouble publishing to business catalyst

Hi all.
Here´s my problem. I use Muse in 2 different locations (same account) and the site I created is perfectly updated and published from location 1 on business catalyst. Problem is, when I downloaded the muse file from CC into my second location computer, added info and tried to publish I keep getting this error message saying that an "unexpected error in Catalyst" has made it impossible to publish the site. Does anyone know what´s going on?
Thanks,

Hi guirodrigues109,
Are you able to open the site on Muse on different location? If yes, then when exactly are you getting this error? A screenshot of an error with the steps you took is appreciated.
Also make sure that you are logged in to Muse with the AdobeID that is merged with your BC site account where you are trying to publish.
OR simply come on chat for Muse support team to investigate this further on your behalf.
Kind Regards,

IWeb trouble publishing

I have made the change to GoDaddy as my hosting site. I have made al necessary changes and the "test connection" in iWeb in the publishing Site Settings indicated it works on the GoDaddy side. When however I hit the "publih site" button it seems to be stuck - I hit that button 20 minutes ago and have not gotten the "visit site" message. When I try to quit iWeb I do get a warning indicating it might be publishig as it reads, "quitting while you are publishing site might cause problems" but 20 minutes seems long for a site that is less than 600MB. Is there a window in iWeb that shows tha status while the site is publishing? Is there something else I need to check in iWeb - anyone else experience something like this? Thanks.

Make sure your publishing settings are correct...
http://www.iwebformusicians.com/iWeb/Publish-Website.html

Trouble publishing iWeb

I designed a new site in iWeb, with an introductory page, and a page with several albums.
When I published it, the pages and albums listed in the tree on the left side switched from blue to red, and when viewed from the site, the album page is blank.
Is this an iWeb problem or one with Mobile Me?
I'm assuming it's iWeb, since it's in the iWeb application where the pages and albums are now red.
So what causes this?
Do I have bad links or something?
I used the Media window on the right and dragged albums from iPhoto to my album page in iWeb. Later I dragged some additional photos and videos directly from iPhoto to my albums in iWeb. I also dragged a video I created in iMovie directly into one of my iWeb albums.
Could my doing that have created my problems?
I've restarted the computer, republished my entire site several times, and deleted the plist file as suggested in this forum.
Any ideas? Why did my pages and albums turn red?
Thanks!

Welcome to the Apple Discussions. Publish the site to a folder on your desktop and run it from there to see if all the pages have been created properly. You can change the destination of the publish by clicking on the site's folder icon in iWeb on the left.
Click to view full size
If the site is what you expected by republishing the site to MobileMe via the File->Publish Entire Site menu option and check online.
The issue with the items turning red has been with iWeb 09 for a while now. It affects some and not others it seems. I've found that even though the icons are red iWeb doesn't always republish the entire site if Publish Changes is used. It's hit or miss on that issue. Be sure to report the problem to Apple via http://www.apple.com/feedback/iweb.html.
OT

Trouble publishing slide shows

when i was using iphoto 6, my slide shows were published on this .mac page:
http://homepage.mac.com/longhaulpro/PhotoAlbum1.html
with iphoto '08 (version 7.1.2), the slide shows are published on another .mac site:
http://gallery.mac.com/longhaulpro#100061
the gallery.mac site that iphoto 7.1.2 is using moves very slowly and seems to have glitches (harder to move pictures and add captions after the slideshows are published)
is there a way to go back to using the older .mac gallery i was using with iphoto 6, while still using iphoto 7.1.2 to load and organize my photos?
thanks.
dan collison

dan:
Your gallery opened and played very fast for me, without any hesitation. Maybe there were some server issues when you tried.
You can still use the Homepage version by building the galleries/slideshows online. Go to the .Mac page, log in, and go to the Homepage section. There you will be able to create new segments.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Trouble publishing

Hello-
I upgraded to Snow Leopard a couple of days ago and everything seemed to be ok. But I started doing some updates to my webpage (hosted by mobileme) and cannot get it to publish consistently.
When I finish making changes I choose File>Publish All to Mobile Me. A window pops up and it shows it transferring files. Then the little clock icon on the top of the page list on the left begins moving. All this is normal. But it takes an extraordinarily long time to update the page changes -- if it works at all. About 75% of the time I get an error message: An error occurred while trying to publish "/Web/Sites". Try Publishing again later.
I have been trying all morning. I have restarted iWeb, and the computer, on separate occasions.
Any ideas?
Thanks.

"rziebol .Mac account is not
ALLOWED to post pages"
Is it possible you have exceeded a data transfer quota? Seems pretty unlikely this early in the month.

Help- Trouble Publishing First Website

Hi, I built and I am ready to publish my first website to the web. I have a host and an ftp account and have signed into the ftp account. I have fallowed a tutorial from tutvids.com that tells me how to publish my site and I fallowed it exactly. I am able to connect to the server from dream weaver and I am even able to see my files on my cpanel on my web server. I also have been able to connect ftp account on filezilla and I can see my files. After all of this my site is still not online and I am wondering what I am doing wrong? Am I missing something? Is there something I can check to see if I have done something wrong? Any help would be greatly appreciated!!

I am getting an error on filezilla saying connection closed by server but before that it did connect to the server and it did have the files. I sent a support ticket to the server asking them for their help but of course they have not answered me back yet. The web address is www.centerstagesalon.net. When I got to that site it just shows the host and that I can sign in to upload the site but it should be the site. The web hosting account was created two nights ago but the domain name was purchased a couple of months ago. The domain name was purchased from a different provider but I have already pointed it to the the host and it does go to the host. The tutorial showed that when you go through the site manager on dreamweaver you put in your ftp info and test it and mine worked fine. I then fallowed the instructions to add the site files and they were added fine. Then I checked to see if it was online and it wasn't. So then I tried to get help through the host. I submitted a support ticket, which hasn't been answered. I also fallowed the instructions and configured the ftp account and dl filezilla. I was able to connect to the ftp account through filezilla aswell and saw the files on that. I then went to my file manager on cpanel for my web host and the files for my site were there under the public folder but still the site is not online. So I am confused and thinking maybe your right that something is wrong with the host. I hope they answer me soon!!

Trouble publishing - new site on new computer, want to replace old site.

I got a new a new mac with iWeb 08 - was previously using 06. Re-built website on new computer, logged in to my account and hit publish. After loading all pages etc, got message "could not publish website". Have a feeling it may have something to do with account now being MME and not dotmac....??? I want to replace the existing website with the new one but it's not working???

If you want everything that's on your current iPad onto the new one, then you can first copy all purchases off the iPad to your computer's iTunes via File > Transfer Purchases. You can then backup your current iPad and restore the new iPad from that backup (a list of what is included in a backup is in this article - it excludes music, videos, synced photos). As the backup doesn't contain the actual apps, just their settings and content, for the restore to work completely you'll need all the relevant apps in your computer's iTunes library - otherwise the restore won't be able to install the apps and therefore their content (which is one reason to do File > Transfer Purchases, if that doesn't copy them over then you can re-download them for free : http://support.apple.com/kb/HT2519).
The restore won't copy passwords onto a different device, so you will need to re-enter your email, router, and any website passwords onto the new iPad.
Depending on what you want to remain on the iPad, you can then either leave it as it is or log out of your account on it (tap on it in Settings > Store) and then wipe it via Settings > General > Reset > Erase All Content And Settings.

Trouble publishing dashboards

Similar Messages

Maybe you are looking for