Trouble Re-installing iTune on Win8

I removed all iTune component as instructed by the post here, but when I try to re-install this message keeps popping out.
I am using Win8 on a lenovo laptop.
What's wrong??

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • Error 2503 when installing itune to win8

    Hi,
    After downloading the itune from the page and clicking for installation, just before the installation finish,
    I am getting a msg saying:
    'the installer has encountered an unexpected error installing this package. this may indicate a prolem with this package, The error code is 2503"
    So HOW can I install itune to Win8 Laptop?
    Pls help,
    Thank you!

    Hi there jrax8,
    You may find the troubleshooting steps in the article below helpful.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W. 

  • Hello, i'm having trouble with installing iTunes.

    There appears an error, saying - 'policy.8.0.Microsoft.VC80.CRT.type="win32-policy".version="8.0.50727.6195".pub licKeyToken="1fc8b3b9a1e18e3b".processorArchitecture="x86"
    I\ve tries everything, but nothing helps(

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • HT1349 Having trouble re-installing itunes to my PC

    My iTunes stop working and it suggested I re-install iTunes
    So I deleted the iTunes that wasn't working and re downloaded itunes from the apple website
    But it wont let me successfully install intunes
    So it comes up with the below message
    Service Apple Mobile Device failed to start
    Verify that you have sufficient previliges to start system service
    Please advise?

    Hi Andrew25,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    I hope this information helps ....
    - Judy

  • Having trouble with Installing itunes on web site

    Can someone help with this issue. I have tried installing itunes thru
    www.apple.com/ipod/start
    I download the program via the 'run' option and it begins to load in the temp file location. It starts to transfer until 77% (always) and then doesn't continue although the function is running. After 20 minutes the message pops up that the process time out. There is no error message. Does anyone know what would cause this?
    Thanks for any help

    I had the same problem, and whether you run or save when downloading it would stop at 76%. After 2 days of defragging, updating virus software, checking my registry and everything else I can think of I finally called support. Go to www.filehippo.com and download itunes from there.

  • Trouble Re-Installing iTunes

    I have received this error message when attmpting to re-install itunes, "there is a problem with the windows installer package. a program required for this install to complete could not be run. Contact your support personnel or package vendor."  I tried downloading and saving the itunes setup and doing the quicktime stand alone installation and it failed. Any tips? I can't have uninstalled and tried to install it all over several times, please help. Thank you!

    Those ones are consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Trouble to install iTunes on my Windows Vista 32-bit laptop. Please help!

    I am trying to install iTunes on my Windows laptop (vista- 32 bit), but at the end of the installing process it keeps saying that I am missing a program to complete installing (no error code). After this message it will de-install iTunes. How can I fix this? Thnx!

    at the end of the installing process it keeps saying that I am missing a program to complete installing (no error code).
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • TS1331 i have tried all the possible way to install itunes on win8 but still not working

    microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKeyToken="1fc8b3b 9a1e18e3b".processorArchitecture="x86". how can i solve this error and install itunes on my PC with windows 8 OS?

    If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
    B-rock

  • Trouble when installing itunes

    iv'e got a satellite L505d- S965 OS windows vista home premium, if i will install itunes for my i pod touch it will also modify other program files and icons so if i open the other program or application software itunes will open.

    Please don't post the same problem multiple times. See my reply to your other post.
    -Jerry

  • HT1926 trouble with installing itunes

    I try to install iTunes but the following is the message I get:
    The Windows installer Service could not be accessed.
    This can occur if you are running Windows in safe mode,
    or if the Windows Installer is not cooectly installed.
    Contact your support personnel for assistance.

    Is that a 64-bit version of Vista you've got there? If so perhaps try the following instructions:
    Vista Home Premium (x64) and installing Itunes - SOLUTION

  • HT1926 Trouble re installing Itunes

    First I had  an old Itunes so every time I wanted to update my ipod or Ipad itunes recomended a re installation .  And i've been trying to Reinstall Itunes in my windows but every time I satrt the instalation it says that I dont have enough privileges and that I should log in as an administrator wich is weird since I am log in as the administratoR. PLEASE HELP

    Is that a 64-bit version of Vista you've got there? If so perhaps try the following instructions:
    Vista Home Premium (x64) and installing Itunes - SOLUTION

  • I am having trouble re-installing iTunes on my windows 7 pc.....

    I was having a bunch of trouble once I updated iTunes to 10. iTunes/apple mobile was taking up 100% of my CPU and making my pc SLOW! I uninstalled all things "Apple", ran a cache cleaner, rebooted and downloaded iTunes again. Now I am getting an error when I try to install it saying " There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." What does that mean? Any ideas on how to fix this? I really need to sync my iPhone!

    Download the CS4 trial version from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    then use your serial number during the install.
    Make sure you follow the "Very Important Instructions" on that page before downloading.
    [topic moved to the  Downloading, Installing, Setting Up forum]

  • I'm having troubles w/ installing iTunes 8.2.0.23

    I download the latest of iTunes and all of Apple Software Updated. But when it came to the iTunes file. I put it in a drive, then it was installing till the last minutes. It showed up a error, "attempting to install to a different drive in Program Files". Can you help me asap!?! I'm so frustrated and trying to install this annoying issue.

    cancel

  • Trouble after installing ITunes 8.2 64bit

    After upgrading/installing I cannot start ITunes. I get the message 'The ITunes library .itl file cannot be found or created. The default location for this file is in iTunes folder in the music folder.'
    I tried uninstalling iTunes then reinstalling but I still get the same message.

    OK, is there an existing iTuneslibrary.itl file there?
    The error message stated
    'The ITunes library .itl file cannot be found or created. The default location for this file is in iTunes folder in the music folder.'
    Maybe it's trying to create one, but doesn't have enough permissions in Vista. Take full control and owernship of the entire user folder (whatever account you'reusing in Vista) and all its subfolders.
    This will include the iTunes subfolder, and have enough permissinos to create things in it.
    How to Take Ownership and Grant Permissions in Windows Vista

  • Having trouble re-installing ituneson my PC. error message half-way through install keeps appearing ""apple mobile device service failed to start. verify that you have sufficient privileges to start system services.

    Hello, I am having trouble re-installing itunes on my PC. error message keep popping up "Apple mobile device failed to start, verify that you have sufficient privileges to start system services.

    The thread mentioned above now has some out of date direct links. This is a more recent version of that post...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

Maybe you are looking for

  • How to pass dynamic params to Transaction iView from webdynpro java app

    Hi Experts, I am trying to call a transaction iview in PCD from my Dynpro application with a dynamic param. Can somebody help me generating the URL for transaction iView and passing the dynamic params??? Thanks in advance biroj...

  • Transport Import History save to spread sheet

    Hi, I have successfully saved the Transport import history as a spreadsheet. i.e. System > List > save > local file > Spreadsheet However, the Return code column is blank? Probably becuase the image did not convert to text? Does anyone maybe know wha

  • CS5 not printing actual size

    I'm using CS5 Extended. I have a canvas size of 8.4x10.95 that I print on 8.5x11 portrait paper. The Scale to Fit Media checkbox is unchecked, and the Scale field is 100%. The printer dialog is set to borderless. When printed, the image seems to be e

  • Any Simplifiede Script to Backup Oracle XE Database

    I need a script to backup XE Database i.e that script should put all the resultant backup filse at a specified location Similarly Restore script which should restore from those files.

  • RFC parameter conversion problem

    Hi, currently I'm calling out of a business process a RFC module in the ABAP stack of our XI to access a DB table which is also located on XI. This table has got one key field of a 25 character length. In our RFC we are sending in the moment in this