Trouble Removing Netflow destination

I have been trying to remove a netflow destination. I have been attempting:
no flow-export destination internal 10.118.5.143 2055
but I receive:
ERROR: flow-export: destination in use. Remove all references before attempting
to delete.
What command/s do I need to run to remove all references?
output from sh run | i flow-export:
flow-export destination internal 10.118.5.143 2055
class-map netflow-export-class
class netflow-export-class
flow-export event-type all destination 10.118.5.143
Thanks!

Check out the last couple of posts at http://forums.manageengine.com/topic/disable-netflow-on-cisco-asa that should addresses this issue.

Similar Messages

I am having trouble removing songs from my iPhone. i have unchecked songs in the library on my mac, but they still show up on phone after syncing. how do I remove them?

I am having trouble removing songs from my iPhone. i have unchecked songs in the library on my mac, but they still show up on phone after syncing. how do I remove them?

Hi asims01,
Welcome to the Support Communities!
The information below may be able to answer your questions about how to delete songs from your iPhone:
Deleting songs downloaded to your device
Tap the Music app.
Tap More > Songs at the bottom.
Scroll or search for the song you would like to delete from your device.
Swipe right to left on the song, and then tap Delete.
Note: You must be in Artists, Songs, or Albums view to delete songs from your device. Deleting from a playlist won't remove a song from your iOS device.
Also, this information can be found on page 64 of the iPhone User Guide for iOS 7
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
If you have iOS 7, this will delete the song from local storage, but the song will still appear with a cloud symbol in the Music app, as you've noticed. To hide the iTunes in the Cloud purchases, navigate to Settings > iTunes & App Store, and disable "Show All: Music”
There may be a few orphaned songs on your iPhone that were partially downloaded or corrupted in some way. If that is the case, you can erase all of the music from your phone. Follow the instructions below and select the Music app under Usage:
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
I hope this information helps ....
- Judy

Trouble removing photos from iPad

I'm having trouble removing photos from my iPad2 running iOS 5.0.1. In iTunes I've told it not to sync ANY photos. When I first changed this it asked me if I wanted to remove the photos currently there, I said yes and they disappeared. But when it finished syncing they had reappeared despite the fact that it now claims I don't have it set to sync any photos. I don't have photostream enabled. I've tried syncing a couple of times, but no luck. Any ideas? (I searched the forums but everything I found was people who didn't understand how to use iTunes to manage iPad content...that's not my problem..) (also it is like 3 gigs of pics so I don't really want to delete them all by hand since there isn't a way to batch delete...)

Try deleting the photo cache from your computer and then select and sync an empty folder to the iPad and see if that removes them - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

Error when removed netflow configuration

I want to remove netflow config, but when I "no ip flow monitor XXXX output" from PORT-PROFILE (type vethernet),
there is a vethernet interface combined this command "ip flow monitor XXXX output" unexpectedly.
And I got an error message when I "no ip flow monitor XXXX output" from this vethernet interface.
Nexus-BIZ(config-if)# no ip flow monitor NAM-BIZ output
2013 Apr 12 08:47:42 Nexus-BIZ %NFM-2-VERIFY_FAIL: Verify failed - Client 0xff010266, Reason: unknown error, Interface: Vethernet48
Verify failed - Client 0xff010266, Reason: unknown error, Interface: Vethernet48
Error: could not allocate resources for command
Do anyone know how to remove this configuration?

Check that listener for your standby database has proper handler for PIJ10G2_DGMGRL service name. Use static registration for this.
Then, Protection Mode: MaxAvailability implies SYNC log transport mode. Check this option too in your log_archive_dest_NN settings.
Best Regards,
Alex

TS3212 I am told that the ITunes will not download because it is having trouble removing the older version bonjour. What do I need to do?

I am trying to sync my new IPhone 4 with ITunes. I have tried downloading the new version of ITunes on my pc like it told me to do but it stops in the middle of downloading and says that it is having trouble removing the old bonjour. It said I should contact support. What do I need to do?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

I am having trouble removing/changing my iphone id. It keeps reverting back to my partners id any help would be appreciated.

I am having trouble removing/changing my iphone id. It keeps reverting back to its previous id. How can I fix this problem?

Jgreg14 you have my sympathies. 36 hours ago while using my iPad I was told that my Apple ID had been disabled. Like you I went to the forums, reset my password, and also like you, nothing changed. I have contacted iTunes support and after 24 hours they responded with this:
Cesar here from the iTunes Store Support Team. Your inquiry is very important to me, so I have requested assistance with the issue you reported. You will receive an email after the matter has been investigated and further information is available.
Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Take care!
Boy do I feel special. I sat on the phone to the UK helpline for 30 minutes, and have been told my case has been elevated to "URGENT".
Basically I was wondering if you ever got your problem sorted out?

Trouble removing the screws

I have a "new" (Open Box) Mac Mini 2.0 ghz Intel Core 2 Duo that I bought through PowerMax. I want to upgrade the RAM, and I'm having trouble removing the four screws around the base of the inner chassis. I'm using a Phillips-head PH-00 screwdriver. Last night, I was able to get three of the screws out, but couldn't get the last one. I gave up and just put the computer back together. I'm trying again tonight, and I'm having the same problem. Am I missing something? Is there a preferred order for removing the screws or something? The screws giving me the most problem just won't come out. No matter how long I turn, they just won't move. It feels like the screwdriver has good placement, and I can feel something moving. I've watched several videos online of this procedure, and it seems like most people can just pop them right out. Any advice?

I was watching a video on some web site, and some of the screws in a mac book pro have a magnent holding it very very tightly! Perhaps that will solve your problem!
-Devin

Trouble removing screws on Powerbook...What helps?

I'm having trouble removing the screws on both of the sides of the powerbook:
http://www.ifixit.com/Guide/Mac/PowerBook-G4-Al-12-Inch-867-MHz/Metal-Framework/ 53/15/Page-4#top
They're very tight and nothing seems to help.
What can I use or do?

J.F.
These screws are very stubborn. You need to be very careful not to damage the head of the screw. I did that the other day and was fortunate that I had it out a bit and my son-in-law, who has a steadier hand than I, used a thin cutting disk on a dremel tool to make it a slotted screw. So, what can you do? You could try a tiny drop of WD40 or penetrating oil, and give it time to penetrate. If you can't get it, take it to the Genius Bar and get some help.
cornelius

Optimizing removes bookmark destinations

For the past several days, every time I optimize a pdf after merging several pdf's, it strips the page destination out the bookmarks. I haven't changed any settings, and in any event don't have the optimizer set to remove any bookmarks, dead or otherwise. I keep Acrobat up to date, and ran a repair yesterday with no effect. Any ideas on what might be causing this, or how to fix it?
Relatedly, for any pdf that I've combined, the bookmarks Options palette is odd. There is no "set destination" option. I have to manually click through the properties to set the page. This isn't a new issue (it's been like that ever since I switched to 9 Pro), but it is newly annoying in light of the first issue.
Much obliged.

Bicubic downsampling for images over 150 ppi, JPEG compression. For clean up, "Optimize Page Content" and "Optimize the PDF for Fast Web View" are selected. The files are set to be compatible with 7.x and up. Nothing else is selected (including Discard Objects and Discard User Data).

JMX Removing JMS Destination

Am using the following:
JMSServerMBean to get a list of JMS Destinations and trying to call
the removeDestination I get the following on the weblogic log:
<Nov 26, 2001 5:27:01 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion BECKER will be removed when JMS starts again.>
<Nov 26, 2001 5:27:01 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion BEST will be removed when JMS starts again.>
<Nov 26, 2001 5:27:01 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion PRIMARKI will be removed when JMS starts again.>
<Nov 26, 2001 5:27:02 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion LATTICEB will be removed when JMS starts again.>
<Nov 26, 2001 5:27:02 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion BRASSI will be removed when JMS starts again.>
<Nov 26, 2001 5:27:02 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion ESI will be removed when JMS starts again.>
<Nov 26, 2001 5:27:02 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion Party2 will be removed when JMS starts again.>
<Nov 26, 2001 5:27:02 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion Group4 will be removed when JMS starts again.>
<Nov 26, 2001 5:27:02 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion HARVARD will be removed when JMS starts again.>
<Nov 26, 2001 5:27:02 PM EST> <Info> <JMS> <JMSServer "AutexJMSServer",
des
ion Party1 will be removed when JMS starts again.>
However when I shutdown weblogic and bring it back up the destinations
are still there.. Is there a way to programatically remove destinations
via mbeans
that works. I am aware that I have to use JMSHelper to add them
otherwise
they dont get written to the config file??
BTW the documentation for this stinks.

Hello Ken,
Actually, when you register the destination in the JMS Connector Service, you are also creating an entry in the JNDI Registry of the Web AS, which you can use to look up the destination in your application. Furthermore, using a resource environment reference (relevant for J2EE applications), you can define an arbitrary lookup name for the destination, so the physical one does remain hidden. Hope this answers your question.
Best regards,
Zornitsa

Removing image destination when mouse placed over document

I have Adobe Acrobat Pro 9. I want to remove the image destination of the images used in the document when the mouse is plaed over them. Doesn't look good.
Tried saving it, and opening it with normal adobe reader and still have same issue.
Please help
Thank you

By example.
With comtemporary versions of MS Word an inserted image's file name is, by default, placed in the Alternative text field.
With the inserted image selected you will observe a bounding box.
Right click to open the context menu and select "Size".
The "Size" dialog is presented.
You'll observe two tabs. Select the "Alt Text" tab.
The value provided for the Alternative text field will be the image's file name.
If your PDF does not need to be an accessible (i.e., ISO 14289-1 compliant PDF) then just leave the value for Alternative text empty.
If your PDF needs to be accessible then provide something meaningful for the value of the Alternative text.
Be well...

Trouble removing a user from creative cloud for teams

I am trying to remove a user from my team, however the X does not show the pop up menu with the option to remove them. Also, when I click on any item on the left hand menu, nothing happens.

Sorry... This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

Had FF, had trouble, removed it, now it won't load at all. I download it and after 5 minutes I "click here" and it send me back to the first page.

Had FireFox and, as has happened before, I started having crashes and other issues. As before, I removed it but this time when I went to install it, nothing happens. I click to DL it and after 5 minutes, nothing happens and i click the button that says "click here" if it does not start on its own. Nothing. I am not real good on these issues, so if I missed something obvious, tell me. Thanks, Jim

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Having trouble getting named destinations to work

I have been trying to add named destinations to a PDF so that I can navigate a viewer to a particular place in a document via a URL such as http://mysite.com/mypdf.pdf#nameddest=blah.
This is not working at all. The URL simply brings them to the beginning of the document. The named destinations feature of Acrobat is really not very complicated. My named destination is clearly there in the document. What could be preventing this from working?
Thanks

The embed code looks right. It must be something wrong with your JS/CSS on the page. Almost seems like you have something transparent on top of the form or something. I'm not a JS/CSS/HTML expert so I can't help anymore than that...
Randy

Having trouble removing photo albums from iPhone 4S

I have several photo albums on my iPhone that I would like to remove, they were created after i downloaded pics from emails, the pics do not have a trash can icon for convenient deletion, I cannot see these albums on my pc when i try to access the files in regular folders (which would be nice and convenient) and I cannot access these albums in anyway through iTunes (as far as I can tell), what can I do to remove these albums I wonder?

If you created the albums in the Photos app, then, in Album view, touch the Edit button. Any Album that you can delete will then have an "X" in the upper left corner of its album icon. Touch the "X" to delete that album.
Other albums that were created by syncing with a PC can only be deleted by syncing with iTunes on that PC with the album unselected.

Trouble Removing Netflow destination

Similar Messages

Maybe you are looking for