Trouble Restoring

Hey so I'm having trouble restoring my Ipod Touch, I have the latest version of Itunes, but I keep get Error Code 9, I have even turned of my firewall and such, but still can't seem to get it to restore. What do I do next? How do I check my proxy settings and make sure my ports are opened up for Itunes?

okay, what you can do is begin to manually delete some songs, and then try.

Similar Messages

  • HT1222 i am having trouble restoring the factory settings on my ipod touch...any suggestions?

    i am having trouble restoring my ipod touch to factory settings...i am connected to the pc, pc is recognizing unit in restore mode, but will not do anything else...any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all media and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • I'm having trouble restoring my ipod. The software starts to download but it stops saying that there is a connection problem when there isn't. What can I do?

    I'm having trouble restoring my ipod. The software starts to download but it stops saying that there is a connection problem when there isn't. What can I do?

    Disable the computer's security software during the download and update.

  • HT4972 I installed a new display screen and now im having trouble restoring my ipad

    I am having trouble restoring my IPad after changing the display. Is there a trick to it.

    No one here would know.
    Performing repairs on your iPad voids your warranty, so we would most likely seek a replacement through Apple.
    You might want to seek advise from wherever you bought the screen.

  • TS3694 I downloaded version ios 7.0.2 and then software collapses. It shows an itunes logo ang connection charger. I connect it to pc but it has trouble restoring data.

    I downloaded version ios 7.0.2 and then software collapses. It shows an itunes logo ang connection charger. I connect it to pc but it has trouble restoring data.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Trouble restoring to Factory setting

    Hi,
    I hav HP1000 with Windows 7, is have partitioned my hard disk into 3 partitions.
    Now i am having trouble restoring notebook, restor factory setting icon is not active. window isnt working Properly.
    I wd appericiate u guyz help.
    thanx
    This question was solved.
    View Solution.

    Partitioning the hdd usually breaks the Recovery function, by changing drive letters and/or usually converting the hdd from Basic disk to Dynamic.
    Try EaseUS Partition Manager to get rid of the extra partitions and convert from Dynamic back to Basic:
    http://www.partition-tool.com/personal.htm
    Btw_If you burned your Recovery Disk set just boot from the first one to start restoring back to factory.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Trouble restoring iphone 4

    I am having trouble restoring my iphone 4 either through WI-FI or itunes. I keep getting the messages "unable to complete activation at this time" or because the "activation server is temporarily unavailable" Has anyone had this happen to him/her beofore?

    Activation issues are almost always due to the phone being, or having been jailbroken. 

  • Trouble Restoring iPhone

    I am having trouble restoring my iPhone. When I try to restore it, it says I need to update my iPhone first but I have already done so and my iPhone says it is currently up to date. I also just try and dowload the update again to just try it and it comes up with an error and won't finish everytime. Help please!
    Also- another question, my iPhone will never finish syncing but will back up the phone. Just says "Waiting for changes to be applied."

    This is a simple solution that might help you too, I was having diffficulty restoring my iPhone 5 on the current iTuneson two different computers an iMac and a Macbook Pro, it was basically showing me the same error as you describe so I connected the Macbook Pro on my modem with a network cable!
    1. Turn off the wi-fi
    2.connect your Mac or other computer directly with the mode using ethernet (Network Cable)
    3. Connect your iPhone
    4. open iTunes and try restoring
    That should work!
    I found it very weird that none of the macs was able to restore it so I decided to try the cable solution and it worked!
    I don't know it might be a bug in iTunes that prevent from restoring wirelesly!
    I also find apple support is very problematic both online and in the stores!!! Unqulified techs everywhere, such a SHAME!!!

  • Having trouble restoring my iPhone 4s error 1 always persist

    Hi Im encountering trouble restoring my iPhone 4s back to its original version 5.0.1.  When I do restore an error 1 pops out of the screen.  please help provide a solution.  Im using a factory unlocked iPhone 4s that is updateable anytime but my problem is one morning when I woke up I saw my phone completely out of power and when I plug it in to my charger, restore mode appears on the screen.  I did several restore but it keeps getting error.  I tried using tiny umbrella to kick it out of restore mode but when it boots up after apple logo appears the spinning wheel never disappear.

    Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes can't contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software isn't interfering with ports 80 or 443 or with the server gs.apple.com.
    Follow these steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (go to "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you're using a proxy, try again without using a proxy.
    Test restoring while connected to a known-good network.
    Error 3004: If you're using a Mac, you may be able to resolve an error 3004 by quitting iTunes and using the following command in the command line: dscacheutil -flushcache.
    all of this at http://support.apple.com/kb/TS3694#error3004

  • HT201210 having trouble restoring my I pad device

    Having trouble restoring my i pad 2 . When I attempt to use safari the screen has a black film and wont allow me to access the web, although I can see all the web addresses All the other areas work properly. So I tried to restore my i pad but I was not able to. Any help would be appreciated . Thanks 
       bill

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Trouble restoring and backing up

    Hi
    I have the iphone 4 running 5.0.1 and am having trouble backing it up and restoring from that backup. Then i right click on the device the menu drops down fine and it will look as if it is backing up when i click on it. But when i try and to restore it from taht backup it fails.
    When i click restore from backup it get a pop up saying
    choose backup to restore from. this will only restore your contacts etc
    then i click the last backup from the drop down menu
    and click restore
    the next pop up says
    restoring ipone from backup
    est time remaining
    this stays on for anywhere from a few seconds to about a minute
    then i get final pop up that says
    itunes could not restore the ipone because backup session failed
    i have tried to deleting the last backup and doing it again. I have deleted itunes and re downloaded and intstalled again and still get the same problems.
    I am running Windows7 and the latest itunes 10.5.33 and firefox.
    oh i have tried backing up to icloud and to my pc and get same errors on both
    any help would be great thanks.

    anyone?  help please?

  • Trouble restoring catalog backup

    Hello
    Last week my hard drive died on me so I had to replace it and reinstall my operating system (Windows 7) and my programs.  I had
    trouble finding my old Elements 6 install files so I decided to upgrade to Elements 9.  Before the HDD died I did do a catalog
    backup of my Elements 6 pictures to an external hard drive.  After upgrading to Elements 9 I went to restore my Elements 6 catalog
    only to find out I apparently had an original and an incremental catalog.  So after restoring the incremental part, Elements 9
    asked for the location of the original .tly file.  Unfortunately I couldn't locate it so the restore operation was aborted.  I have
    approximately 4500 pictures that I backed up on the external hard drive and as I had also stored them separate from the Elements
    catalog backup I can get them back into Elements 9.  However, that means recreating all my tags, categories, subcategories etc all
    over again for about 4500 pictures which is something I'd rather avoid.
    So does anybody out there have a way I can just restore the incremental catalog backup or use the files created to at least get my tags, categories etc back?
    Interestingly enough, there seems to be a lot of duplicate pictures with different file numbers in the Elements backup.  The pictures I have stored
    independently is the the 4500 number, while the pictures on the external hard drive in the Elements 6 catalog folder amounts to
    about 7300.  Why would that be?  In theory shouldn't they be very close to the same number?
    While on the topic of Elements catalog backup, is there really any reason to do an incremental backup?  I tried a couple of
    experimental Elements catalog backups:  the first was an original and the second I added a dozen pictures or so to the catalog and
    tried an incremental backup.  I chose the same folder for the incremental as I used for the original.  I was asked if I would like
    to overwrite and I responded yes.  I then found the .tly file in the next stage of the process and was then informed that I
    couldn't use the same folder for the incremental as the original.  Why on earth not?  Although I initially I thought Elements 6 was
    quite good, I have to admit this whole process has put me off the Elements program quite abit.  So if any of you know of a similar
    product that does essentially the same thing as Elements I would be very interested to hear about it.
    Many thanks in advance

    Hi,
    function(){return A.apply(null,[this].concat($A(arguments)))}
    The pictures I have stored independently is the the 4500 number, while the pictures on the external hard drive in the Elements 6 catalog folder amounts to
    about 7300.  Why would that be
    Some of the extra files should most probably be the breeze.xml files. These are created due to preprocessing of face data. I didn't quite get "duplicate pictures with different file numbers in the Elements backup" ?? . Do you mean they have numbers like -1 , -2 etc attached. If yes, then they exist mostly when you had ediited files present in Organizer. Since these are part of version sets in Organizer so theie count is not shown in Organizer but you see it in your backup.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    So does anybody out there have a way I can just restore the incremental catalog backup or use the files created to at least get my tags, categories etc back?
    To restore the catlog, you will need to go to File>Restore catalog from ... , browse for the .tly file and hit restore.
    Incremental backup comes into picture when you had taken the backup of catalog before. So next time, you make changes to catalog and wish to take a backup , you have the option for an incremental backup which backs up only the changes done in Organizer since the original backup was taken. Incremental backup builds on the original backup and hence its not allowed to overwrite the original.
    Hope this helps. Thanks

  • Trouble restoring my iPhone 4S

    When switching the power on, the prompt on the screen is to connect to iTunes.  After connecting to itunes and attempting to restore the phone, I receive error 9.  I have replace the connecting cable...problem still exists.  I have tried differnet ports on my MacBook and this still does not solve the problem.  I have the most up to date iTunes version.  Any and all suggestions are greatly appreciated.
    Very respectfully.

    I'm having trouble starting my car.
    If you want useful help, you'll have to post useful info - what EXACTLY did you do and what EXACTLY happened.
    What happens in vagueness, stays in vagueness!

  • I am having trouble restoring music and podcasts to my iPhone after a system upgrade that required a restore to factory settings? All I can access is purchased music.

    When I upgraded to OS 6 I had to restore my iPhone 4 to factory settings and now only have access to my purchased music and only some podcasts.  Lost my playlists and most podcasts and can't figure out how to retrieve them from a old iTunes library on windows especially with the new podcasts app...podcasts no longer appear in iTunes.   Is there a way to fix this?

    Its not a matter of Safari "supporting this site". Its a lack of testing on United's part that its site is compatible across all platforms. They have introduced code, script or markup that isn't fully compatible. You can try downloading Chrome or an alternate browser as a work around for now. But it is United's job to fix its site. My guess is that enough complaints will come in and they will do so, but this is an airline we are talking about.

  • Trouble restoring/formatting hard drive.

    I maybe did this wrong, so let preface with that but from my basic experience reading on the forums about how to do everything.
    So let's start from the beginning.
    Been having issues with what I believe to be a hard drive issue, been hearing screeching/scratching noises coming from my computer, and computer was constantly crashing when I tried to load heavy-duty cpu applications (i.e. Live or PS etc.) and then recently it was crashing when I would do certain things on firefox like load large video files or even attempt to use like VLC or Stuffit. Low CPU intensive things. So then it seemed to me as if it were a disk permission errors, repaired disk multiple multiple times, I once got an error that said something to the effect that disk was beyond repair.
    Anyways. So I came to the conclusion that the hard drive was the source of my issues, so I thought maybe a wipe and reinstall would at least be helpful. So I begin by using my TimeMachine backup to create a recent restore point and upload some of my most important files to online storage. Now let's think of from here on out in steps.
    1. I started my mac up in recovery mode and and then first tried a basic reinstall of the OS X and while it did take forever it did not really fix my problem of the crashing so, problem still there!
    2. I started my mac up in recovery mode for the 2nd time, and I began the restoration.
    This is where I may have taken a wrong step. [Never really done this before]
    3. First I erased the internal hard drive.
    4. I used the restore tab and chose to restore from the backup drive and put the image on the now erased internal hard drive. While this did also take forever, it seemingly did work.
    Now my problem is I can't boot from this hard drive now nor can I erase it and try over. I am kind of stuck in a bad limbo. I am using the safari client from the recovery mode.
    The error I get when I try to erase the original HD says that it cannot be unmounted, when I try to do the restore from time machine backup it says something like bad pipe. I am contemplating ordering a new hard drive but I was wondering if there was anyway of salvaging this one because from what I can tell it's basically bricked and is useless at this point. Would really love some help here as my laptop is basically a huge part of my everyday life as I spent $2500 dollars initially for it, and I wish I was more adept at macs but they are very unique and the error reports are not as simple as PC's.
    Thanks for any help or consideration

    You can't restore a Time Machine backup by using Disk Utility. Doing this, you will restore all the backups you have, keeping the Time Machine structure, so you just have turned your internal hard drive onto a Time Machine drive.
    It looks like your problem is that you are trying to erase the whole hard drive while you are using it, and this can't be done if you have started in Recovery HD. Simply close Disk Utility, select the option to restore a Time Machine backup and follow its steps, but it will probably not do anything.
    In your case, you should get a new hard drive, as the one you have looks like it's failing

Maybe you are looking for

  • EOIO Queing

    Hi All,          Scenario is File to Multiple IDocs. I have used BPM for this. Requirement is to process files in the same sequence as they are sent. So in the File adapter configuration, i ve choosed EOIO as the processing sequence and given a queue

  • How to remove extra char in the uploaded file...?

    Dear All, There is file upload page in our portal.When user uploads the file (CSV) i can see there is extra char (^M) in the unix env.How can I remove that extra char before inserting into the database.For inserting into database I am using below cod

  • MAX 2011 pre-conference lab

    If you are coming to MAX 2011 in Los Angeles, there is a pre-conference lab we're presenting that you probably don't want to miss.  It is called "Developer Best Practices for LiveCycle Enterprise Suite" (PL1380), with particular emphasis on Forms (de

  • Can't open my AOL mail comes up a blank page?

    I can't open my AOL mail while on Firefox. It always worked before but now a blank page show when I click on individual mail. I can open my AOL mail with Internet Explorer. Anyone know how to fix this???

  • When i make an in app purchase it says purchase could not be completed

    I have downloaded an app and when I try to get an upgrade it says purchase could not be completed