Trouble saving multiple documents with Adobe Reader 10

I am unable to download and save multiple PDF documents from a web site. Since I upgraded to Reader 10 this has been a problem.
The first document saves with no problem, However I can't save a second document (have tried using the icon on top of the page as well as the one on the new bar on the document).   When I log off the site and go back in I still can not download the second document.
However, when I log  out and shut down the browser, and then restart the browser I have no problem downloading the second document but can not download another PDF.   I use Firefox 3.6.13 as my browser.
Is there a solution other than trying to reinstall Adobe 9?

After installing Reader 10 (aka Reader X), I had exact same problem --trying to save multiple documents via Firefox browser (up-to-date version 3.6.13), only first document can be saved -- attempts to save 2nd document results in nothing happening.  Uninstalled and reinstalled Reader 10, problem same.  After closing browser, waiting a couple of minutes, could then save 2nd file -- but then could not save 3rd file right away, etc.   Gave up -- uninstalled Reader 10 and went back to Reader 9.4 -- no problems with old version.  Based on other comments on this forum, it seems like Reader 10 is not ready for prime time.

Similar Messages

  • I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?

    I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Is this an Adobe issue, Microsoft issue, or security issue? 

    Thank you!  That seemed to do the trick.  Don't think I'd ever have figured that one out!!
           From: pwillener <[email protected]>
    To: Sharon Atkins <[email protected]>
    Sent: Monday, February 16, 2015 9:47 PM
    Subject:  I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?
    I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?
    created by pwillener in Adobe Reader - View the full discussionSince you mention Microsoft, I assume that you are on Windows. Can you open Reader by itself?  If so, try disabling Protected Mode Edit . If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7201334#7201334 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7201334#7201334 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Which API can use to save PDF document with Adobe Reader 9?

    Hello,
        which API can use to save PDF document with Adobe Reader 9? It is said that "CosDocSaveWithParams" can't be used.
    thanks!
    jimmy

    Unless the PDF file is "READER ENABLED for SAVE" (see the adobe product pages on LiveCycle Reader extensions server)
    You are not able to call a Save at all, if the document is reader enabled then you need to use the JavaScript call to save the document,
    As you appear to be wanting to do this in a plug-in you would need to call the script from a plug-in, this can be done using the AFExecuteThisScript () function call.
    Please note that this does will fail if the document is not reader enabled for save and you need to include the Forms HFT in your plug-in,
    This plug-in would also have to be approved by Adobe to be used with the reader and as you are implementing a function that is available in the full Acrobat product this may not be a straight forward approval.
    HTH
    Malky

  • Cannot sign documents with Adobe Reader 10.1.3 - 10.1.10, Can sign document with 10.1.2 and 11.0.07

    Cannot sign documents with Adobe Reader 10.1.3 - 10.1.10, Can sign document with 10.1.2 and 11.0.07
    In my environment, we have 10.1.2 that's currently packaged. Our CIO was able to sign documents via signature with no problem. Later he got updated to 10.1.9, no longer can sign.
    During testing I was able to confirm that 10.1.2 signed without problems, but anything that, it goes kaput, the Sign and options are not listed.
    Latest Adobe Reader can sign... any ideas?

    I'm having a similar problem.  What I'm trying to do is print a Microsoft Word 2010 document with paper size A4 to Adobe pdf document paper size A4.  I select "A4" for paper size in word and then print using Adobe print standard settings.  What I get is an Adobe document in 8.5 x 11.  This is an issue because these are patent documents for electronic filing in WIPO and they must be in A4 size.
    If I select other sizes in Word, such as A3, Tabloid, and Legal, the Adobe file is in the same paper size.
    If I print a Powerpoint document in A4 to Adobe, the Adobe file page size is A4.
    If I print an Adobe file in 8.5 x11 to Adobe A4, the second Adobe file is in A4.
    Any help? 

  • I am having trouble viewing PDF's with Adobe Reader XI

    I  am having trouble viewing PDF's with Adobe Reader XI

    I am using Windows 7 home edition and using Internet Explorer 10
    The PDF's are online on websites that I am trying to open.  Both on the site as well as trying in a new window.
    Thank you
    Jeff

  • When printing a signed document with Adobe Reader, the comment icons appear.  How do I prevent this

    When printing a signed document with Adobe Reader, the comment icons appear.  How do I prevent this ?

    When printing from Reader, select Document instead of Document and Markups:

  • Cannot open multiple files with Adobe Reader X

    Hi to all!
    I've just installed Adobe Reader X. This is my problem: I select multiple pdf files (from 2 to 9) from a folder, then I click whith the right mouse button and choose "Open with Adobe Reader X" (or chlick the Enter button). I expect that Acrobat will open all the files I selected but only one will open!
    If I try to open the files from the File/Open function in Reader X and I choose the same documents, the documents itselfs will be open correctly!
    I use the same procedure using Reader 9.x but I've not the same problem.
    Can anyone help me?
    Thanks in advance.
    Stefano

    I have the same problem, but cannot find this supposed "Adobe Reader" forum, nor can I find an "Acrobat Reader" forum. (Everything else seems to be there, but no Reader...)
    With all previous versions over recent years, up to version 9, I could select multiple PDF files in Windows Explorer, hit Enter, and it loaded them all. Then I could Ctrl+F6 to switch between the documents.
    Now, if I try this with just 2 PDF files, it loads one and then locks up, with each session of Acrobat taking about 40-45% of processor power. I have to crash out of it.
    Help!
    Or at least show me where this Acrobat Reader forum is?
    Many thanks

  • The form can not be saved if open with adobe reader

    Hi all,
    I create a registration form using Adobe LiveCycle Designer 8.0.1291 then I Save As both into static and dynamic
    Then when I'm open the registration form file using Adobe Reader 9 then there's message appearing says "Please Fill it up this following form . You CAN NOT save data Type into this document bla.. bla.. "
    My question is why if I open it with acrobat then the form able to be saved but it can not be saved if I open with adobe reader ?
    Need suggestion for this matter
    Thanks

    You need to Reader Extend the form to work with Adobe Reader..
    Open the same file in Adobe Acrobat and goto Advanced Menu -> Extend Features in Adobe Reader and save the file..
    Thanks
    Srini

  • Trouble saving certain pdfs with Adobe x

    I have just upgraded to Adobe x and am now unable to save certain pdfs (eg journal articles). They are not protected files and I was able to do this with the previous version. Same issue as previously asked and also running Windows 7:
    "I am unable to save copies ofcertain pdfs in Reader X (10.1.1). The pdf (from an academic journal) opens without problem but when I click on the Save a copy icon in the tool bar nothing happens.  I'm told to click Shift+Ctrl+S and then get a "Bad Parameter " message.  If I click on the Print icon there is no problem.  I'm running Windows 7"
    Help would be great - needing to get study done!!
    Thanks
    Kelly

    After installing Reader 10 (aka Reader X), I had exact same problem --trying to save multiple documents via Firefox browser (up-to-date version 3.6.13), only first document can be saved -- attempts to save 2nd document results in nothing happening.  Uninstalled and reinstalled Reader 10, problem same.  After closing browser, waiting a couple of minutes, could then save 2nd file -- but then could not save 3rd file right away, etc.   Gave up -- uninstalled Reader 10 and went back to Reader 9.4 -- no problems with old version.  Based on other comments on this forum, it seems like Reader 10 is not ready for prime time.

  • Problems opening documents with Adobe Reader XI

    I tried to open a file from my email account. I got a message from Adobe Reader XI that it could not open ecause it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded.  I get this message with some documents which I have been able to open in the past and now I  can't.  I do not have Microsoft Office on my computer.  I have Microsoft Word Starter 2010.  I am a home user and this program works well as my Word software.  I have downloaded a trial of Adobe Acrobat Pro XI and that hasn't solved my problem.  Can anyone help me?

    If you don't have Word but want to view Word docs, you can download and install the MS Word Viewer from http://www.microsoft.com/en-us/download/details.aspx?id=4.
    In fact, istalling it may clear up the file association problem all on it's own.

  • How can I print commentaries made to a pdf-document with Adobe reader ?

    My message and question is contained in the header of this message.
    I am receiving occasionally  PDF- documents as an attachement  to an email for examination. I can attach comments to special parts of the document, which are indicated by tags in the document and in a list at the side of that document.
    I may return the document with my remarks to the sender.
    The Problem is: When he wants to print out the document, he will print the tags, but not the content of my comments.
    Is there a way to print the comments also or the list of may comments?
    Thank for your help.
    ko-tri

    Hi,
    Welcome to Adobe forums.
    Please see : http://helpx.adobe.com/acrobat/kb/print-comments-acrobat-reader.html
    I hope this will help you.
    Please let me know, if you need any more help on this.
    ~ Aditya

  • Open PDF document with Adobe Reader

    Hi everyone,
    I am building an application to be published as an AIR app. I need to add a PDF along with the application, so the user needs to have access to this document. When the user clicks to open the PDF is there a way the document can be opened using Adobe Reader and NOT the default browser?
    Thank you for your help!
    Rafa.

    Try Adobe support.
    Adobe Support
    Adobe Forums

  • Problem with printing DIN A3 Documents with Adobe Reader XI

    Hi,
    i have some documents in DIN A3 with several pages. If these documents are printed (i tried different printers), the first page is printed correctly, but the other pages are printed wrong. On the left you can see the first page and on the right you see the other and wrong printed pages, but all pages should look like the first page. In Adobe Reader X it works correct and i installed Reader XI with default settings.
    What i have to do, that all pages are printed right? I tested and tried with Windows 7 and XP.
    Regards,
    M.Hivner

    Hi SuzyQ1,
    The opening time of a PDF depends a lot on its internal structure.
    Very complex forms are also known for long opening times.
    Try clearing the Temporary files on your Windows and it will speed up your system to some extent.
    Another thing you can do is,you would have to turn off any software that is running either in your Task Bar or shut them down in Task Manager.
    Regards,
    Florence

  • Trouble opening PDF's with Adobe reader 10 installed message says in firefox that Adobe is already running

    when clicking to this location from an email http://www.kintera.org/atf/cf/%7B44A7E79F-5565-4339-80EA-4F48AC5FD4AC%7D/GUIDETOFUNDRAISING.PDF
    received the following error message that site was busy and it would not complete the load of the document.
    It would load the same document at the same site if I used IE 9
    I am running windows 7 and Firefox 5

    You can try the following:
    right click on the item you want to open.
    Then select open with: then select default program.
    Then you browse to your new Adobe Reader executable, and set the always use this program checkbox.
    should do the trick.
    Regards,
    Mas

  • Opening documents with Adobe Reader

    I have recently installed Parallels 8 on my Mac 10.7.5 Computer.To day I installed Adobe Reader to enable me to download and print documents from my bank.I have not been able to do so.Any help and advice you can give can give to enable me to do this would be most grateful.

    "not been able" does not really tell us anything.

Maybe you are looking for

  • Vendor Down payment request

    Hi, I have 2 queries regarding vendor down payment request F-47 1) Want to create DPR on header level (We have ECC.6 No enhancement package) 2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will

  • How do I make one video plays after the other

    Let's say I have an idvd project with 5 different movies, how do I make one plays after the other? When I click next, it goes back to the menu. Thanks Alex

  • Why foreign currency valuation is required ?

    Hi. I just want to clear my doubt. If we deal with foreign vendors or customers like vendor invoice is done through USD or EUR or GBP but payment is not made till now or customer invoices are done but payment is not received from them in month of Aug

  • Reg. Scenerio Sheets are not importing while importing the model.

    Hi All , Due to some issues , I exported the existing model and then do the isreset before importing the model. I imported the model which i exported. I am unable to see any Scenerio Sheet , planning Sheet in Analysis Workbench which i created earlie

  • How to use dbo procedure to execute for different schema?

    I am using SQL Server 2008 R2, I have a schema [dbo], and in that schema, I have created a stored procedure dbo.GetAccount: CREATE PROCEDURE dbo.GetAccount AS BEGIN select * from tblAccountNet END GO Then, I have created a schema [ABC] with user name