Trouble seeing edits when XMPs are replaced

Hi, Everyone
I'm doing editing for a friend. She sent me raw along with xmps. After creating a catalog and editing I exported as original/xmp, emailed her only the xmps but she can't see the edits on her end. I told her to simply replace her original xmps with the ones I sent her. Should the edits not automatically show up when she opens her catalog? Or does she have to select all / Metadata / Read Metadata from file?
Any suggestions would be greatly appreciated! Thanks!!!

I think you have to issue the Read Metadata from File command. Otherwise, Lightroom doesn't use the information in the XMP file.

Similar Messages

  • Layers' actions disappear when pages are replaced in PDF?

    When I replace pages in an existing PDF with updated ones, my actions for layers seem to not keep the actions they had set to them. I check the properties, and they seem to be there, but the action does not work.
    I am replacing the exact amount of pages and the exact amount of layers.
    Any ideas? Am I missing something when I replace the pages?

    I think you will have to reestablish the actions. Layers are not like annotations that are left in place when the underlying page gets replaced. Layers (OCGs) are page contents, so when they're replaced with something new, the connection is broken.
    Consider what would happen if you replace a page that had OCGs with one that doesn't. Since the OCGs are no longer present, any actions that control them would naturally not work. So even when replacing a page with one that contains the same OCSs, they are still not considered to be identical at a lower level and the actions can no longer work.

  • Having trouble seeing images when I installed apex 4.0

    I installed apex 4.0, but the opening web page has no image icons.
    in my dad file i have this
    # ============================================================================
    # mod_plsql DAD Configuration File
    # ============================================================================
    # 1. Please refer to dads.README for a description of this file
    # ============================================================================
    # Note: This file should typically be included in your plsql.conf file with
    # the "include" directive.
    # Hint: You can look at some sample DADs in the dads.README file
    # ============================================================================
    Alias /i/ "C:\apex\images"
    AddType text/xml xbl
    AddType text/x-component htc
    <Location /pls/apex>
    SetHandler pls_handler
    Order deny,allow
    Allow from all
    AllowOverride None
    PlsqlDatabaseUsername APEX_PUBLIC_USER
    PlsqlDatabasePassword apexpwd
    PlsqlDatabaseConnectString wblincoelt.caci.com:1521:orcl ServiceNameFormat
    PlsqlAuthenticationMode Basic
    PlsqlDefaultPage apex
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDocumentPath docs
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlNLSLanguage AMERICAN_AMERICA.UTF8
    PlsqlPathAlias          url
    </Location>

    DougBlincoe wrote:
    I installed apex 4.0, but the opening web page has no image icons.Check to make sure you performed the configuration properly - I always have trouble with that :(. Review the image copy steps to make sure you copied the images to your /i/ folder c:\apex\images as Varad suggested - on the other hand, when I forgot to do that in 3.2 Apex did not work at all due to .css files it needed not being there.

  • Minor bug with editing when there are multiple pages of reports on the list

    When I edit a report and save the changes, I am returned to a different page on the list of reports than I started from.
    Steps to reproduce:
    1. Sort reports by Type
    2. On the first page on the list of reports, find  a custom report I created
    3. click Edit, then click Save
    4. I am returned to page 2 of the reports instead of page 1.
    5. If I click Cancel instead of Save, I'm returned to page 1 as expected.
    Depending on which page I started from I may be returned to some other seemingly random page, i.e. starting from page 4 I might be returned to page 3.
    Expected behavior - it should either return me to the first page, or else return me to the page I started from.
    This topic first appeared in the Spiceworks Community

    Make sure your logo is not overlapped with any window... and i guess, your smartform has two page formats...
    Identify the next page attribute of you first page and do the amendments as stated above.
    Regards,
    SaiRam

  • Illus. CS3 Windows: Im having trouble selecting text when objects are beneath it.

    Technically, I CAN select text, its just a pain in the ***. There is a very fine line to click on and I usually end up selecting the obnect that the text is on top of. If someone knows another way to do this I will be most appreciative.
    Cheers,

    Have you perhaps enabled the Type Object Selection by Path Only option (see Illustrator preferences) ?
    If so, disable it.

  • When working in my photo album in iphoto my photos are replaced with a grey box and an !. I can't see the image on the page.

    Lately when I am working in my photo album in iPhoto my images are replaced with a grey box and an ! . I can't see the images on the page. All my photos are high quality.  What am I doing wrong?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Is anyone else having trouble seeing their screens when you are outside?

    Is anyone else having trouble seeing their screens when you are outside?

    When is sunlight, absolutely. Not a problem with the Droid Ultra but rather all phones.
    You ever see the commercial about the Nook devices. The have a special screen to reduce glare allowing you to see your screen in sunlight.
    As far as I know, companies have not implemented this on anycell phone.
    There are after market anti-glare screen protectors
    Check Amazon or eBay, they should be relatively inexpensive.
    Good Luck

  • Why can't I get the same photos and videos I have taken and edited in photos or I photos when I see them in my laptop the photos are unedited in laptop I can see edited photos on in my iPhone not in laptop

    Why can't I can see edited photos and videos. On my laptop why only the original version of the photos are maintained

    Have you copied those pictures from the iPhone to the computer? 
    If PhotoStream is enabled on the iPhone and computer, they will sync between all devices with PhotoStream enabled.  And if that is the case, are you editing the photos in PhotoStream or in Camera Roll?

  • I am not able to see "Edit Mode on" when i log into workspace...

    I am not able to see "Edit Mode on" when i log into workspace...through Weblogic user...Oracle BPM 11g

    If your trying to put pictures that are on your phone to your computer you import it see link below
    http://support.apple.com/kb/HT4083

  • I uploaded videos to the premiere, and when I go to edit them they are zoomed in majorly close. What do I do?

    I uploaded videos to the premiere, and when I go to edit them they are zoomed in majorly close. What do I do?

    It is possible your sequence settings do not match your source material. In the Project Pane, drag one of your source clips to the New Item icon at the bottom right, and release the mouse. That will create a new sequence that matches the properties of the source clip. See if that helps. If so, edit in the new sequence.
    MtD

  • How to replace sky when there are trees in the photo

    I have several photos taken outdoors with a dull sky. I also have several sky shots to supply the blue sky; with or without clouds. I know a couple of ways to do  that --as long as the horizon line is clear, such as roofs, etc.  My preferred method is to use a tool; e.g., Magic Wand, to select the sky area and then copy/paste a blue sky image using Ctrl+Shift+V command. This makes the copied sky inserted into the original image and I'm happy with the results.
    But when there are trees or other bushes between the camera and the sky, problems begin.  No matter how carefully I try to include all the "holes" in those trees, the end result contains white spots where the selected section failed to follow the tree "holes".  Anybody know how to fix these types of problems?  I am somewhat familiar with layers-- which I have tried to use to solve this problem.
    Using PSE-12 on Windows 8.1
    TIA,
    Pete Grant

    Pete,
    There are several ways to do this. In my experience the Alibony technique works well. You will be able to use your "good" sky pictures:
    Watch Lesson 12: Quick Colorless Sky Replacement | Alibony Lessons for Photoshop Elements Episodes | How To Videos | Bli…
    As I pointed out to you on June 5, 2014, this is how I do it after watching the Alibony video.
    Open your picture (A) (File>open), and open the replacement sky picture (B)
    On the sky picture (B), go to Select>all from the menu, then Edit>copy to place it on the clipboard
    Go back to your picture (A), then Edit>paste. The new sky (B) should come in on a new layer
    With the move tool, use the corner handles to reduce the size of the sky (B) to cover the old sky on (A)
    In the layers palette, set the blending mode of (B) to darken
    Set the foreground color chip to white
    Get the Gradient tool out of the toolbox, and drag a foreground to transparent, linear gradient from below up to the top of the tree line, while holding down the shift key.
    With a soft white brush, at reduced opacity, gently paint the horizon a bit, as we want the horizon to be a tad lighter than the rest of the sky.
    If necessary, add a few clouds with the Return to Eden set.

  • Mac desktop. 10.6.8. Text edit. Not locked. Read and write. Still, documents are locking when they are moved from desktop to another folder on the server. Techies can't figure it out here. What am I not doing?

    Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

    Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

  • When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

    I got my ipad2 replaced yesterday. And this new ipad started giving me problem by crashing aps. Then I restored the ipad twice but the problem was still there. I called apple and they fixed it by doing Reset All Settings. But now I have this weird problem. When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

    There is no way for anyone here to know if your replacement iPad is a refurbished unit.  Per Apple's replacement policy, replacements can be refurbished units.  If you feel the unit is not working correctly, take it back, let them check it out and if found defective, they will replace that unit.

  • In iTunes on my windows 7 PC, the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's.

    In iTunes on my windows 7 PC, in the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's on several of the preferences pages.  The Apple people at the store did not help.  I have lownloaded the latest version of iTunes and this is still an issue.  HELP.

    Is there really nobody else with this problem? Really?

  • How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view

    How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?

    SamanthaR22 wrote:
    How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?  [Emphasis added.]
    The digitization of data has introduced a complexity to our interactions with it that we continue to struggle with.  "Picture" and "Photo" now mean different things in different contexts.  In this case (and in general) defining our terms clearly is the first step towards understanding what we are trying to do.  Understanding is the path that allows us to do it.
    All pedantic, but please stick with me here  .
    You record a set of instantaneous data with a camera.
    That data is processed by your camera and saved to a file.
    The file format is usually either RAW or JPG.
    You transfer those files to your computer, and you import them into the program Aperture (often in one operation).
    From each camera-file imported, Aperture creates a record in its database (called, imho unhelpfully, a Library) and an Image that you see in the Aperture Browser and Viewer.
    Aperture links the Image and the imported file.
    The imported file is called, within Aperture, an Original.
    Every Image has an Original.
    The Image is not the Original.  The Image is what you see in Aperture.
    The Original is a file that is stored on your computer.
    You can make changes to an Image.
    Aperture calls these changes Adjustments.
    Adjustments are saved to another file attached to the record in the database.  Let's call this file the Changes File.
    Aperture uses these two files attached to the record in the database to create the Image.
    Image = Original + Changes File.
    The Image is not a file.
    Because the Image is not a file, it cannot be shared with other programs.  It exists only inside of Aperture.
    In order to share an Image with another program, you must first create a file of the Image.
    You do this by exporting Images ("File ▹ Export ▹ Version" is the command in Aperture; should be, imho, "File ▹ Export ▹ Image").
    You may ask, "Why all the complexity?  Why doesn't Aperture save Images as files?"  The answer is simple:  Images can require less — and in many cases very very much less — storage space than files of Images.  Rather than save a full-size file for every Image, Aperture saves only instructions on how to make that full-size file.  The gain in storage efficiency is huge.  The trade-off is that although your Images are always available to be made into share-able files, you must create those files when needed (which you do by exporting selected Images).
    Here is your question reworded with more precise terms:
    SamanthaR22 might have written:
    How do I access Images in my Aperture Library in the Finder?  I would like I be able to select files in the Finder when I am making photo books online without having to create them by exporting Images from Aperture into a new Finder folder. Is there any way to view and download my Images directly from the Finder?
    No, there is not.  Images exist only in Aperture, and are not accessible for use in other programs.  You must create, for each Image in your Aperture Library, a new file outside of your Aperture Library in order to use it with another program.
    Aperture does allow you to create and save within your Library share-able files of your Images.  These files are called Previews.  You specify the file parameters in Aperture Preferences on the Previews tab.  These files are available to other programs via the OS X Media Browser.  These files are what you get when you drag selected Images out of the Aperture program and drop them on another program or on your desktop (which is part of the Finder).
    HTH.
    —Kirby.

Maybe you are looking for