Trouble seeing hard drive connected to Extreme; Win7; NetBIOS (53) error

I posted the gist of this as a reply to someone else's question (http://discussions.apple.com/message.jspa?messageID=11240882#11240882) and got no response, so just you have the answer but missed it, I'm re-posting.
When I try to access a hard drive plugged into my Extreme from my Win7 machine, I get an error something like "Unable to access drive. Make sure that NetBIOS is activated (53)."
First, although prior discussion indicates this is likely not just because NetBIOS is not activated, I suppose I should make sure it is; how do I do that?
Second, a previous responder recommended renaming the Extreme and the share disks to not have any spaces in the names. I did that for the Extreme (it didn't work). But I'm not sure where to do that for the drive; in Airport Utility, I don't see an option to name the drive. If I plug the drive straight into my computer, the name comes up without spaces. Have I taken care of this, or am I missing something?
Third, the only opportunity Win7 gives me to try to access the drive is when I reboot the computer; then a window pops up saying, "A network drive FnuLnu's_AirportExtreme has become available," and asks for the password (and then gives the above error message). If I cancel out, I can't figure out how to again try to access the drive without rebooting. How do I do this?
Thanks much.

Pondini wrote:
Jolly Giant wrote:
wetfox wrote:
In the Finder, I do not see anything called shared to look for the Airport Extreme icon.
the following screen shot is from my TC but it works the same for your extreme
No, an Airport Extreme doesn't look like that.
didn't say it would look like that, i said it works the same
i just fired up my extreme and, lo and behold, @ least to my eye it looks (and certainly works) the same
Double-click the Airport there, and you'll get another Finder winow, showing +Connected as+ at the top of the center portion, and a list of the volume(s) on the AirDisk(s).
yep, not unlike the TC ...
happy computing, y'all !
JGG

Similar Messages

Cannot see hard drives on airport extreme

Recently I cannot see hard drives on the network that are connected through Airport Extreme . The airport Extreme can see the drives, but the network cannot. I have not changed any settings that I know of. Only a reset of my macbook pro running Mavericks allows me to gives me access to the drives. Airport utility 6.3.2

+I will check when I get home. How do I do that?+
Connect the drive directly to a USB port on your Mac.
Then open Macintosh HD > Applications > Utilities > Disk Utility
Click on the drive in left hand panel and look for information at the bottom of the window about the disk
Your drive may be formatted as Windows NFTS. If that's the case, you will need to reformat the drive to work at the USB port of the AirPort Extreme. Be sure to copy any data that you need to another drive (maybe twice to be sure) before you do this as the reformat will erase all data on the drive.
When you are ready, click the Erase tab and then select MS-DOS (FAT) as the format so both PCs and Macs will be able to read the files.
Then copy a small test file back over to the FAT drive and plug the drive into the USB port on the AirPort Extreme. Restart everything on your network starting with the modem first, then device attached to the modem, etc.
On you Mac, open Macintosh HD and check to see if your AirPort Extreme icon appears under the SHARED heading on the left side of the window. If so, click the icon and folder will appear to the right representing your drive. Double click this folder to reveal the contents and mount the drive on your desktop. You should see your test file. Make sure it is operable..music plays, video works, etc.
Sorry, I haven't used Windows in 3-4 years and cannot remember how to access drives, but I would start with My Computer and start poking around. You want to verify that your PC can access and play the files as well.
If everything is OK,you can copy all your backup files back onto the USB drive attached to the AirPort Extreme. Keep the extra backup copy handy for awhile, just in case as well.

Adding external hard drive to airport extreme for time machine error

Hello,
I recently bought an airport extreme that I wanted to combine with an external hard drive in order to do wireless time machine backups. I hooked this up and the hard drive shows up in the devices menu.
However, when time machine starts to backup, I get the following error:
"The backup disk image “/Volumes/Blackmer External MyBook/Benjamin Crispell Blackmer’s MacBook Pro.sparsebundle” could not be created (error 1)."
When my computer is connected directly to the hard drive, it works fine.
Any ideas on how to fix this?
Thank you.

It is important to understand that Apple does not support Time Machine backups to a drive at the USB port of the AirPort Extreme. So, that may be an issue here.
Despite this, users try it anyway. Some appear to be successful for a time, some partially successful, some can't get it to work at all.
Even if it does appear to work initially, corruption issues may occur down the line without warning. Having tried this myself as a test a few times, I can attest to that.
If you want to try this anyway, the two important things to check are.....
The drive must be formatted in Mac OS Extended (Journaled). Other formats will not work
You almost always need to use a powered USB hub...even if the hard drive has its own power supply....because the USB port is under powered on the AirPort Extreme
You might also want to consider a secondary backup plan to protect your important files

XP sp3 cannot see usb hard drive connected to airport extreme 802.11n

I have a sata drive that the airport utility recognizes. I attempted to follow the instructions from post HT1331 but no luck yet. I also reformatted the drive from ntfs to fat32 using vista but with the same result.
I found another post while writing this one which solved my problem. It turns out how I formatted the drive wasn't usable by AEBS.
Connecting Large USB Hard Drives to Airport Extreme
I needed to format the drive using the instructions found below.
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
After doing this and plugging in the drive I was able to use the drive intended. Since I had started the post I figured I would list the solution.
Cheers!

I don't think two problem are related. Now, for PC, try to disable the firewall software if you ave one. Some firewall can block it, like for ex PC Tools firewall, or ZonaAlarm. Some of them you can configure to work with disk agent.

Time machine can no longer see USB drive connected to airport extreme

According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
Does any one have any idea how to make Time Machine work again when connected to my airport extreme?

bradleydad wrote:
According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
Does any one have any idea how to make Time Machine work again when connected to my airport extreme?
what exactly do you mean when you say that TM doesn't see the drive? do you mean you can not choose it as the destination TM drive in TM system preferences? do you see the airport drive mounted in finder? if yes, connect it directly to your mac and repair the disk (not permissions) with disk utility. then move it back to AEBS. see if that helps. if not try the following terminal command
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
it should not be necessary with drives connected to AEBS but it might work.

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

External hard drive connected to Airport Extreme not working on PC

I have a Macbook Pro running 10.9.1 and my work laptop, which runs Windows 7. I have a WD 2TB external hard drive connected to my Airport Extreme, with 1TB formatted for Mac and the other 1TB formatted in FAT format. My Macbook can connect to the drive and read/write perfectly fine, but I'm not even seeing the drive on my PC anywhere. I'm wanting to use the Mac formatted partition to backup photos and personal documents and the FAT partition to backup my work.
Is there a setup thing I need to do on either the Airport Extreme or on my PC to connect to have the drive visible? Both drives are setup to allow file sharing and my Airport Extreme is running version 7.6.4.
Thanks!

There are 3 different methods to establish a connection from your PC to the hard drive in this Apple support document:
http://support.apple.com/kb/HT1331

Saving files to a hard drive connected to my Airport Extreme

I just upgraded to Leopard. I am unable to use Backup v 3.1.2 to save files to a hard drive i have connected to my Airport Extreme. Previously, using Tiger i was able to perform this task.
I use Finder and see my airport express network and my external hard drive. However, when i run my backup jobs using Backup the program can not located the external hard drives.

The discussion was helpful. My hard drive connected to my Airport Extreme is now recognized and i can backup files to a folder called 'Backups'. However, i am only capable of saving to this one folder. When i try to create subfolders and select one of them as my location in the Backup program i get an error message; "the selected location is not a valid destination". Any idea how to get around this problem?
Many thanks for the quick response to my previous mail.

How to connect a hard drive on Airport Extreme (second edition)

how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

The USB port your Mac is high powered. The port on the AirPort Extreme is not.
So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

Connecting to an external hard drive connected to airport extreme via usb

I have two computers running off my airport extreme base station. I have a desktop computer connected via an ethernet connection and i have a laptop that connects wirelessly. I have an external hard drive connected via the usb on my Airport. I installed my airport disk utility software on my desktop as it is the computer i store all my itunes material on and it syncs to my ATV. I am able to see my external hard drive as a networked drive on my desktop, and it works fine. However i am not able to see the networked drive on my laptop. I am running Norton 360 on both machines and both machines are running Windows Vista.
Do I have to install the Airport Disk Utility on both machines? I have read thru lots of threads about this and have not been able to solve this problem. I have gone into my firewall settings and allowed file sharing on my laptop. I cannot think of anything else to do. Any help would be greatly appreciated as this is the main reason I purchased my Airport Extreme.

I have exactly the same set-up, but I can see the portable drive with my MacBookPro but not with the PC connected by an ethernet cable to the Airport Extreme. How did you get the PC to see the portable drive on the Airport?

Cannot find my hard drive connected to my extreme

Hi - I am using a Windows 7 PC and cannot find the hard drive connected to my airport extreme. I have gone into manaul set up on the extreme and asked it to share the files which it has confirmed, yet when I go into windows explorer I cannot see the drive at all ...... can I please ask for some assitance?

Just want to be sure of three things first if you don't mind:
Does the 802.11n AirPort Extreme Base Station (AEBSn) have a Base Station Name that includes a space? For example: My AirPort Extreme. If it does, rename it so that it does not have any spaces or use the underscore character between words.
Does the shared HDD have a volume name that includes a space? If it does, again, remove them or add underscore characters.
Is the HDD formatted in NTFS? If so, the AEBSn does the best job of sharing HDDs formatted in HFS+, then FAT32. It will NOT work properly with HDDs formatted in NTFS. If the HDD is very high capacity, you may want to borrow a friend's Mac to format it in HFS+ or get a utility that lets your PC format/read/write to HFS+ volumes. Regardless of it being formatted in HFS+, the AEBSn will share it out using both the AFP (for Macs) and SMB (for Windows/Linux) file sharing protocols ... so Windows PC should not have any difficulty accessing it.

Can't see contents of USB hard drive connected to Time Capsule

Hi. I have a USB hard drive connected to my Time Capsule (which I just got today). I just want to use it as a shared drive, so that the users in my home can use it to access common files (media files, stuff like that).
The TC's set up is to enable file sharing with accounts. AirPort Disk Guest Access is not allowed.
When I authenticate as a user via Finder I can see the disk, see that disk space has been used, but can't see the contents. I'm guessing this is because the files that are actually on there belong to some other user.
Is my guess right? Any suggestions as to how we can all use it as a transfer drive?
Col

Fixed it. I connected the USB drive directly to my computer, and dragged the folder into the 'Shared' folder, which Time Capsule had created. The original folder is now visible, which is what I wanted!

Can i access music on my hard drive connected to airport extreme with my iphone 5

Can I access photos and music on my usb hard drive connected to an airport extreme using an iPhone 5? I can access theme with mac and pc.
Thanks, Kevex.

Yes, but not out of the box. You have to download an app like FileBrowser.

Can a PC share a hard drive connected to Airport Extreme?

I have a new Airport Extreme with a Seagate FreeAgent Desk for Mac 1.5 TB hard drive connected via USB. The Airport connects to the internet via a Linksys Vonage router, and two Macs are set up to use the Airport via wireless. The FreeAgent drive has 4 partitions: 1 for a TimeMachine backup from both Macs, 2 for SuperDuper backups of both Macs, and 1 for home video files and other backups. I also have a Dell PC running Windows XP SP2 hardwired to the same Linksys Vonage router.
I'd like to use partition 4 on the FreeAgent drive to backup the PC. Is this possible, and if so, how do I get the PC to recognize the FreeAgent drive?
Thanks very much for your help.

dwhewlings, Welcome to the discussion area!
Yes, you need to use Bonjour for Windows.

Can Time Machine back up a external hard drive connected to Airport Extreme

I recently purchased a new macbook pro, and airport extreme.
I attached a 750 GB external hard drive to the macbook pro, and reformatted it so time machine made the initial back up and hourly back ups from there.
Is it possible to now to unattach the external hard drive and attach it to the airport extreme, where the mac book time machine will back up to the external hard drive through airport extreme?
i have seen conflicting posts is if this is possible.

That would probably be safest.
Note that Apple's position on this got even more negative with Snow Leopard: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
It does work well for some folks, not so well for some, and not at all for others.
I got a refurb dual-band model in September. It worked well for about 3 months, but lately I get the error 109 and corrupted backups every few days, that Disk Utility can't fix. Once, Disk Warrior could, but since then, if they're corrupted, nothing helps. That's on a year-old Seagate drive that seems fine otherwise, especially when connected directly.
And I have an excellent wireless connection; it's only about 10 feet from my Mac, speeds are great, S/N ratio is good, etc.
It makes no sense to me that a TC would work better, but they seem to.

Trouble seeing hard drive connected to Extreme; Win7; NetBIOS (53) error

Similar Messages

Maybe you are looking for