Trouble seting up a small home network

i have cable internet wich works fine but i need to connect my apple to another mac the old one is running panther so i know its possible but i dont know what i need to go to to set it up i would appreciate some help on this matter thanks
brandon

Hi Brandon,
Based on the subject of your post (ie. you do actually want a network rather than to just temporarily connect your 2 machines) what you want is a router. This will connect to your cable modem and then share that connection amongst several other machines by creating your own little subnet. They're reasonably cheap.
The two flavours to consider are wireless (which will also include some wired ports) or wired only. There are quite a number of brands/models and, while OS X plays by the standards so it shouldn't matter, you should probably look for one that explicitly states it is compatible with Mac OS X.
Graham

Similar Messages

  • Small home network using a mini

    Hello i'd like to set up a small home network. The component i have are:
    A broadband connection via a cable modem
    A mac mini which can act as a server (i'd like to provide access to shared photos and music, and connect an external HD for backup and storage)
    2 airport wireless routers
    2 macbook pro laptops and 1 mini all with wireless
    Any suggestions as to the most effective way to link this all together?
    Thanks
    Tim

    Hi Tim,
    You've accidentally posted this on the iPod Mini forum, not the Mac Mini!
    Mark

  • Auto mounting hard drive across a small home network

    Hi,
    How do you setup a Power Mac 6500 running Mac OS 9.1 to automatically mount it's hard drive at startup onto a PowerMac G4 running Mac OSX 10.2.8? I have a small network at home that I'd like to cross-mount hard drives across.
    I can mount the volume just fine manually from either machine. I just don't know the GUI or command on 9.1 to do the mounting automatically at startup.
    Any ideas, or suggestions would be greatly appreciated!
    Ed

    Here's the (partial) answer I was looking for.
    To go from a remote machine --> 6500, do the following:
    1) Open "Chooser".
    2) Select "Apple Share".
    3) Type in the DNS name of the computer you want to mount onto the 6500 in the box labeled "Server IP Address". If TCP/IP isn't active, then type in the numerical IP address.
    4) When prompted, type in the password for your keychain, and then the account name and password on the remote machine that you want to automount.
    5) Then select the drive (share), or shares, you wish to mount.
    6) To automount at startup, check the box "Allow at Startup".
    To get the share on the remote machine to automount at Startup, your keychain must be readable by the AppleShare application at Startup (ie. the "Allow access without warning" box on the keychain should be checked).
    To go in the other direction, ie. 6500 --> Remote machine:
    To automount the 6500's hard drive onto a G4, one needs to do that configuration on the G4, via NetInfo or launchd, depending upon the version of Mac OSX. These get into UNIX networking commands, which is probably outside the main scope of this forum. I'm working on getting the UNIX boxes configured now. If anyone would like to know the commands, just post back here.
    I found out how to use the "Chooser" on Mac OS9.x platforms from p. 68 of the Apple manual "Mac OSX Server: File Services Administration for 10.4 or later".
    The Apple Technical Note 1111 on programmatic mounting of shares under AppleShare is also useful.
    Ed

  • Can I set up a small home network on mt BThub3

    Hi,
    I have two standard PCs one running on Vista and the other on XP also a laptop. They all successfully access the internet via a BT Hub 3. One computer connects via a LAN cable the laptop and the other computer connect via a wirless connection
    If possible I would like to network these three computers via the BT hub for data transfer and also for the computers to use the single printer I have.
    I have read various items about setting up the computers to share a printer but as I have no experience of networks and how to intergrate the computers through the hub.
    Any advice would be greatly appreciated.
    David

    This is quite straighforward, but I would recommend that you look at one of the many help pages on the web, that describe in detail what you need to do.
    The home hub does not really play any part in this, its just an interconnection point.
    Here is a page to get you started with Windows XP.
    http://compnetworking.about.com/od/windowsxpnetworking/ht/sharewinxpfiles.htm
    and Vista
    http://windows.about.com/od/networkconnect/ss/sharing_files_printers_all.htm
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Newbie - setting up small home network

    I'm hoping to get some advice & suggestions. I'm basically a newbie at teching w/macs - I've done some pc teching over the years and am a MS Office wiz. I'm helping an artist friend out with their home office set up after a bad experience with a Computer School Student. I'm trying to connect a week old iMac w/ a G4 laptop and an older 2004 iMac (no airport card). The office has Verizon DSL w/a linksys router --- the internet functions are fine on all machines, the new iMac & laptop connect for file sharing as well although I have the prob of not knowing the admin password and the owner can't remember it. The old 04iMac I've hotwired/hardwired through the router and get internet & email ok (its a bit slow, probly normal).
    File sharing - am I correct in assuming that the hardwired 04iMac can't do both functions (ie file share & internet) at the same time? There is space for an airport to be installed - IF the owner chose to do so, would that change the functionality (ie could I then do the file sharing & internet at the same time?).
    Password issue - ok with the laptop, I searched the files and found instructions on how to reset the password. I tried it but didn't get the prompts that the article said I would in nvram (geez I hope that's right or I'll look like a dork). I wasn't prompted for my password. I did safely get out of that screen (boy I was nervous) the passwords remained the same. I'm wondering if I missed something. I wasn't sure if I really was booted from the CD as the article stated, though I did hold the C key down while restarting?
    Any comments will be much appreciated. I'm doing pretty good and LOVE mac's. Can't wait to get my own probly MacBook Pro this year (I use the BF's off and on for now)
    Thanks in advance,
    Simply,
    Lesa

    Thank you, I got the password issue solved and the laptop and New iMac network/talk to each other fine and I can print from either machine. The 04 iMac is hard wired into the Linksys router (DSL internet service) ... I can't figure out how to connect to the other machines or the printer. I have the printer chosen in Utilities/Print Center, I have the Apple Talk - Make Apple Talk Active chosen, Location is set on Automatic. In File Sharing, I have Personal file sharing and Printer sharing checked. I have 2 accounts set up on the 04 iMac. When I type a test page in Text Edit and hit the print que, the job appears to be sent to the printer although it didn't show up in the Print Center window and almost immediately the Text Edit program crashes, this also happened in Safari as I attempted to print a test internet page and happens from both Accounts, the Admin account and my other User Account.
    I also have had some difficulty with keeping the DSL/internet connection running on the other User Account - though it seems to be working ok today.
    One other - non-networking issue is that in Mail for my other User Account, often when the machine automatically checks for or sends email we are asked for the password although we keep checking the box to save the password and I'm pretty sure I set Mail up so that we wouldn't have to re-enter the password.
    Thanks in advance - I appreciate your help and experience as well as having a place to ask questions and reach out for help.
    Simply,
    Lesa

  • Best way to set up DVCP/NAT in small, home network

    I have a Verizon static, fiber connection for internet access to a Netgear, FVX538 router.
    From the router, I have an Airport Extreme and two (2) Airport Expresses extending the network thru the house.
    I need to have DHCP enabled so my kids can come home at all times and be able to easily gain access with their laptops.
    My question is, which machine should be providing the addresses?? The router or the Airport Extreme??
    Or should I just forget DHCP and go to static?
    Many thanks

    My question is, which machine should be providing the addresses?? The router or the Airport Extreme??
    As you know, both are routers, but if you will have any devices, other than the AEBSn, connected to the Netgear, then you will want the Netgear to provide both NAT & DHCP services. In turn, the AEBSn would need to be configured as a bridge to allow the Netgear to provide these services to all the devices connected (wired or wirelessly) to the network.

  • Help setting up small home network with PC and an imac!!!?

    I have an imac in my room, and my mother has a JP PC in her room across the house. We have a router and modem on her computer(I connect to the internet through the router signal)
    I just recently bought a new printer. It is a wifi printer. I was told by a friend that I need to setup a small netowrk so all the computers/printers in the house can talk to one another. Because right now my printer is installed and connected to the router signal (but my computer does not reconize it to print....)
    I started a small network on my moms PC...but when I can't make a network CD like it tells me to because my computer is a Mac....how do I continue to setup this network?Can I set it up first on my mac as well???PLEASE HELP! I want to use my printer!

    You can just connect the WRT54G wireless router’s LAN port to BEFSR41 router’s LAN port by using a network cable as specified in this configuring wireless router as access point article, after that can connect other computers to that wireless router with or without cable. Finally do more test to check the performance. Hope it helps.

  • Creating a small home network

    I have a trusty iMac G4 (17" version) a new Toshiba PC Laptop from work, a Canon Pixma 450 printer and an internet connection.
    I am wanting to connect the above so that both computers can use the internet connection and printer and possibly share files with each other.
    My Mac has no wireless facility.
    The wireless router I am looking at has 4 ports at the back for wired connection which I was going to plug the Mac and Printer into, plus a port for internet.
    Questions are ..
    Will this work with a Mac and PC?
    How do I file share from Mac to PC?
    If I have a 7.0Mb internet connection will a 54Mbs router be enough, will it affect file sharing speed?
    Can I just plug them all in and get going in a plug and play stylee?
    Thanks for your time,
    James
    iMac G4 17 Flat Panel 768mb Ram, Lacie 250gb HD   Mac OS X (10.3.9)  

    This should help you:
    Setting up a local Ethernet network
    Equipment needed:
    Cable/DSL modem: usually supplied by the ISP
    Gateway/Router: at least a 4-port router, but you can get them with more ports if you need them. (Alternatively, you can get a switching hub to provide additional ports.)
    CAT 5 Ethernet cables: one cable is needed for each device connected to the router plus one to connect the router to the cable/DSL modem.
    1. Connect the Cable/DSL modem to the router's WAN port using an Ethernet cable (CAT 5 for 10/100.)
    2. Connect each computer to the router's LAN ports using Ethernet cables. If you have network printers, etc. connect them to a LAN port on the router. If the router doesn't have enough ports, then you will need to purchase one with more ports or connect a switching hub to the router.
    3. Now, for each Mac open its Network preference pane. Select the Built-in Ethernet port for configuration. In the TCP/IP configuration window set the connection/configuration to DHCP from the dropdown menu. Set your Location dropdown menu to Automatic and the Show dropdown menu to Built-in Ethernet.
    4. Shut everything off. First, turn on the Cable/DSL modem and wait for the connect lights to indicate it has connected to the ISP. Next, turn on the router and wait to see if the Cable/DSL modem's communication status light starts to flicker. Also, if there is a status light on the router it should show a connection. Last, power up the computer. If all is well the TCP/IP control panel or Network pref pane should indicate an IP has been obtained from the router, usually in the 192.168.nnn.nnn range. If it's 169.xxx.xxx.xxx then you don't really have a connection.
    5. If you have network printers connected each printer will have to be assigned its own unique IP address in the router's address range (usually 192.168.nnn.nnn.) Assign the printer(s) IP addresses above the number of computers that will be connected but within the router's DHCP address assignment range. Consult the router's documentation for that information. Consult the printer manual for how to assign an IP address to the printer. When you install the printer driver and/or Add the printer you will add it as an IP printer or LPR printer and use the IP address you assigned to the printer.
    6. If you have an USB printer then connect it to one of the computers, install the proper printer driver (if one is not provided with OS X), then add the printer using the Print Setup Utility. Verify the printer works. Then open the Sharing preference pane and turn on Printer Sharing. On the other computers install and/or add the printer using the Print Setup Utility. It should appear under the category of Shared Printers.
    7. To share files use the Sharing preference pane and turn on Personal File Sharing. If you want to share from all computers then turn on file sharing for all the connected computers.

  • Setting up a (small) home network

    I have an iBook G4, an old iMac (running OS 9), an inkjet printer, a laser printer, Airport Extreme and an Internet modem. I would like to hook all of this up so that both Macs are connected to both printers, both Macs are connected to the Internet and that I have wireless connection for internet and printing (to both printers) available to the iBook. (The iMac is not Airport compatible.)
    Right now, everything works, but we have to unplug the printers from one Mac to the Airport when we want to print. Is there a single piece of hardware we need to hook this all together, or is it going to be more complicated than that?
    I know just enough about this stuff to get by and/or to be dangerous, so any advice would be appreciated.

    You've got a cable or DSL modem, right? I happen to have DSL, and my DSL modem is actually a combo DSL modem/router/wireless access point. So life is a bit easier for me. But both of my sons are on cable, and I think they both have a single wired port coming out of their cable modem, to which they have to connect a wireless router (like an Airport Extreme Base Station). Are you like that?
    If so, while I don't have an AEBS, as far as I know, an AEBS has firewall capability in it, and can configure for DHCP IP address assignment or static IP address assignment or a mix of both (i.e., it routes).
    If my presupposition is true, there are a couple of things I would do to configure your network. First would be to put your DSL/cable modem in bridge mode (so the IP address assigned by your ISP is passed through to the external IP address side of your AEBS) and then configure the AEBS for NAT (i.e., it doles out 10.0.x.x addresses to everything in your residential LAN). Why? Because if both devices are doing NAT, then the modem is giving your BS a 192.168.x.x address, and then your BS is giving your computers a 10.0.x.x address. Some applications (most notably iChat) do not like double-NATting traffic through two firewalls/routers.
    I'm not sure whether a device in bridge mode can have an active firewall or not. Never tried it. If it can, enable your firewall on the modem. If it can't, enable the firewall in the AEBS.
    Now, check whether your printers can support accepting DHCP address assignments from a router. They may need to have static IP addresses (i.e., you may need to manually assign IP addresses to the devices). I don't know enough about AEBSs to know whether they can support a mix of static and dynamic IP addresses on the local LAN side, or whether it is all of one or all of the other. So you may need to disable DHCP in the AEBS and give it (on the residential LAN side) and your computers and printers a manually assigned IP address. If it supports a mix of static and DHCP, just give them IP addresses in the static address range, and your computers can still be configured to accept DHCP assignments from the AEBS. If the printers support DHCP, never mind all this drivel.
    If you don't have enough wired ports for the iMac and one or more of the printers are not wireless-capable, connect a printer or two to your iMac via USB, and enable printer sharing in System Preferences > Sharing on the iMac. Other computers on your residential LAN should be able to find the printers so long as the iMac is powered up and printer sharing has been enabled on it.
    Now have that other martini!
    (If you find that my post solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider clicking on either the "helpful" or "solved" buttons in the header of my post. Thank you.)

  • Small Home Network.........

    I have a AEBS serving up for my wife's i-Book wirelessly and an i-Mac thru the LAN off the AEBS .I would like to set-up my Dell and another PC slave thru a 5-port Linksys switch to recieve my Verizon DSL also. Could I send the DSL straight to the switch and have the AEBS come off the switch also or do I need a seperate router for the AEBS and the switch?? Thanks...
    iMac 500mhz Summer 2000   Mac OS X (10.4.4)  

    No, you cannot use the switch between the modem and the AEBS. To do so would probably violate your ISP terms of usage (more than one IP address being pulled from the ISP), and you would create two logical networks (those devices connected to the switch, and those to the AEBS) which would not see each other AND those devices connected to the switch would be accessible to any hacker looking for something to do. You should connect the switch to the LAN (<->) port of the AEBS, and all your ethernet connected devices should be connected to the switch.

  • Trouble with wired and wireless home network

    I recently installed a WTR54GS with my desktop wired to it and my laptop wireless.  My laptop can get to the internet (router is attached to a cable modem) but it can not see shared files on the desktop or the printer that is attached to the desktop.  However, the desktop can see the shared file folder on the laptop.  I can not seem to correct this.  Latest error message I got was Microsoft 871122, something about wireless zero configuration.  I'm about ready to go back to my old USR router that worked fine, except that it lost its IP address periodically.  Any advice? 

    It could be a bunch of things. I am guessing you added the wireless laptop after the desk top. The best place to start is on your desktop. Right click on your shared folder. From the dropdown menu select sharing and security. From there it gives you several options as well as more info...including your firewall settings. Do the same thing on your desktop using Control Panal and the printers and fax icon right click on your printer. You might also check to see if your LAN or Worgroup match between the two puters. You can make it work no matter, but might find it easier if they are the same. Do this by right clicking on My Computer, choose properties on the dropdown choose the computer name tab. It will give you an option to change the settings...That is a basic start...the wireless 0 connection error your are getting implies that you let microsoft setup on your  wireless adapter settings on your laptop. This can be disabled. I avoid using the micorsoft stuff for setup for your wireless adapter. Just my prefrence. That is with one exception and unless you are Windows Registry Hexpert, I won.t get into that.
    Anyway a possiable start.

  • Printing problems with a shared printer on home network

    Hi
    I just upgraded all my Macs to Tiger. We have been running Panther very smoothly since it came out. We have a small home network running on a standard hub. The USB printer is attached to one of my G4s, and the rest of the network uses this as a printer connection.
    I've been successfully printing to our HP 920C printer from all my programs for years now. Now that I've gone to Tiger, my printer Utility sees and registers the printer, but when I try to print to it from any of the Apple text programs, there is no response. I print from Illustrator with no trouble at all. TextEdit for example, sees the printer, but when I click the "PRINT" button from the print dialogue nothing happens. I am wondering why this is.
    To note: I have added a line of code to the Terminal, which unblocks the system for Adobe Distiller to create PDFs (sudo killall -HUP cupsd). This was reccomended by Adobe with Panther in order to bypass a PDF function whithin Panther. I wonder if it was a mistake to add it to Tiger, and that it is this that is blocking TextEdit. If this is the case how do I remove the command, and reset the system to its default PDF setting.

    It was a simple problem after all. Sadly my hard disc was about to snuff it. I changed disk, reinsalled Tiger and all is as smooth as ever.

  • Leopard not seeing Windows shares on a home network - one solution

    I have a small home network with a MacBook Pro, MacMini and a PC connected by Ethernet and a MacBook and a Powerbook connecting remotely. Recently upgraded to Leopard and initially could see the PC in the sharing tab of the sidebar of the Finder window. This then disappeared and was not fixed by the 10.5.1 update.
    I spent hours messing around and now seem to have fixed the problem to the extent that the PC now shows up in the sharing tab spontaneously and this survives a restart.
    First I looked at the workgroup issue in the WINS tab of the advanced settings in the Network preference pane. This wouldn’t ‘stick’ and the solution (posted elsewhere) is to duplicate the location setting, delete the old one and then use the new duplicated one, then you can enter a workgroup name and it will stick. The Mac doesn’t seem to detect a workgroup and I only found what the workgroup name was later. There was a greyed out NetBios name for my mac however. I also made sure that SMB sharing was enabled in the options dialog box in the sharing pane, (if you disable AFP sharing and close the window with SMB enabled the message in the sharing pane then says ‘Windows sharing enabled’ if both AFP and SMB are enabled then Windows sharing is not mentioned)
    I intermittently tried to connect to server on smb://192.168 etc. and I kept getting a connection failed dialog box.
    Still getting nowhere, so went to the PC to have a look at that. Found the correct workgroup name by searching the help for “computer, name” and this directed me to find the computer and workgroup names. I went back to the Mac and put in the workgroup name but still no joy. Went back to the PC and looked at ‘my network places’ and sure enough the public folder on my mac appeared and if I put a file into it I could open it on the PC.
    I then looked at the firewall settings on the PC (I’m using BitDefender 2008 total security) and set the Mac to be a trusted computer on the network. Went back to the mac and tried connecting via the connect to server dialog box and this worked!!! I was asked for my windows password and having put this in the shared folders on the PC appeared. The PC appeared in the sidebar with a generic icon and the IP address (192.168.etc) next to it instead of the computer name. However, after I ejected the PC to see if I could connect again, it suddenly popped up again spontaneously in the sidebar with the usual PC-type computer name, i.e. a name followed by a random seeming alphanumeric string. If I select the PC in the sidebar and then click on the ‘connect as…’ button in the Finder window the shared folders appear.
    As I say this ability to see the PC has now survived a restart so fingers crossed. I can't say which bits of the above were the important ones but it did seem to work.
    Maybe this might help others
    Cheers
    Iain

    I recently installed Leopard and just today wanted to connect to one of my Windows machines. After a Google search and some forum browsing I did the following:
    - System Prefs > Network > Ethernet > Advanced... > WINS > Workgroup
    - entered my Workgroup name (WORKGROUP)
    - clicked "Ok" then "Apply"
    - Restarted
    - Apple Key + "K" smb://192.168.1.1
    - Authentication box appeared; I typed in my creditials
    - Then I noticed that the finder sidebar had populated the "shared" section with my Workgroup computers (all two of them). Not sure if it was populated after the restart but sure it wasn't there before.
    - Just restarted and the "Shared" section is still populated with the Windows workgroup machines.
    I'm very glad this is working as I have the "no WiFi" bug.

  • Can't connect to Home Network and Printer

    hi,
    I just bought my first mac, its a macbook with leopard, and am having quite a bit of trouble connecting it to our home network. I'm not much of a computer whiz, so i have no idea what to do. Our network doesn't have any security, but does need a password, and each time i try to connect it after putting in my name and password it says "The Volume cannot be Mounted" and then comes up with an error message saying "an unexpected error occurred". And because i cannot connect to the network i cannot connect to our printers and need them desperately, i start uni in a week!
    what can i do?
    thanks
    dan
    if more details are needed let me know...

    What version of Leopard are you using? I asked because Apple just released 10.5.2.
    Plus if you are adding a lone Mac to a windows network then read the user reports at MacWindows.com (you should have the site bookmark if you are going to mix Macs into PC networks).
    Message was edited by: satcomer

  • MacBookPro suddenly stopped linking to my home network by Wi-Fi.

    Without me making any system updates or changes, my MacbookPro today put up the following message
    "Another device on the network is using your computer’s IP address (192.168.0.5).
    Try connecting again later. If you continue to have problems, change the IP address of this computer or the IP address of the other device. Contact the network administrator if you need more information."
    A little later my MacbookPro stopped communicating with the internet and with my printer, both of which it normally does by wi-fi. The internet connection was previously via my small home network which also incorporates an iMac, a Time Capsule, a Canon printer and a router.
    When I attempt now to communicate via wi-fi from the MacbookPro I cannot access the internet or my printer. However, the MacbookPro is still able to communicate with the iMac by wi-fi.
    The MacbookPro can connect to the internet if I connect it by an ethernet cable to the Time Capsule.
    I've tried setting up a new wi-fi connection in Preferences/Network, but can't do so as I don't know what to enter for the IP address and the Subnet Mask. The message under 'Status' in Preferences/Network when I select 'Wi-fi' in left panel is "Wi-Fi has the self-assigned IP address 169.254.85.222 and will not be able to connect to the Internet."
    So I still can't use wi-fi to connect to my Home Network, the internet or my printer.
    I have reset the Time Capsule, but the problem persists.
    The iMac appears to be operating normally. It is connected to the Time Capsule by ethernet cable, as usual.
    Any suggestions about what has caused this to happen and how to fix it?

    I'm a bit surprised I have had no response to this question. Have I supplied too much information?
    NOPE!  We need all the details we can get! You can never supply too much info.
    Sometimes, we don't know the answers or the answers may be already supplied in previous threads and/or Knowledge Base.  You will have to do a forum & KB search if you have not already done so.
    That being said, will give it a shot...
    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT4628  Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.
    I don't know what to enter for the IP address and the Subnet Mask.
    You can this info directly from your ISP.

Maybe you are looking for