Trouble setting up printer on airport extreme

hi guys i have an airport extreme 802.11n and i'm having troubles setting up my samsung ml-2510 printer. can someone help me out?

Yes, i have tried it, the airport base station reads the printer correctly, but when i try to share it with bonjour, and i get this error. I also can't find bounjour with spotlight.
http://img403.imageshack.us/img403/9213/picture1siv.png

Similar Messages

Problem setting up printer for AirPort Extreme wireless printing

I have an AirPort Extreme 802.11n and I've connected my Canon MP240 printer to it via USB. However, my MacBook Pro (running OS X 10.8.4) says the printer is "offline" when it is plugged into AirPort Extreme and turned on. When I try to add it as a new printer, it recognizes it as a "Nearby Printer" and asks me to download and install the software from Apple. It then searches for the software for about a minute and gives me this error message: "Can't install the software for the Canon MP240 series because it is not currently available from the Software Update server." I've tried directly downloading the drivers from Apple's website http://support.apple.com/kb/DL899 and from Canon's website http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp240#DriversAndSoftware but neither work.
HOWEVER, the strangest part is if I were to connect the printer to my MacBook Pro directly via USB, it recognizes the printer and I can print no problem. This leads me to believe the drivers have already been installed onto my computer. If anyone knows how to get around this issue I'd greatly appreciate the help.

Hi biyyadiii,
If you are having issues setting up your printer via your Airprot Extreme, you may find the following article helpful:
Apple Support: USB printer troubleshooting for AirPort Express, AirPort Extreme, and AirPort Time Capsule
http://support.apple.com/kb/TS1253
Cheers,
- Brenden

Im having trouble setting up my older airport extreme...

airport utility not letting me setup my airport extreme (the round model) it says it it doesnt support? i need help

You will need AirPort Utility v5.6 to administer the older 802.11g AirPort base stations. The v6.x of this utility does NOT support these earlier models.

How do I unhide my network which I recently set up with new Airport Extreme?

I recently set up my new Airport Extreme. Then realised my Canon MX 410 was not seeing it on wifi network. I've been told I need to unhide the AE so the printer can see it. However, when I go into Airport Utility it is not giving me the option to unhide. I have tried connecting ethernet cable to it & turning off wifi, but this does not help.. Any ideas people?
Thanks....

I've been told I need to unhide the AE so the printer can see it.
Advice likes this sounds good.....IF.....you previously enabled the option to "hide" your network. Chances are, you would know if you did do this, but if you are not sure, you can check to see if the network really is "hidden".
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options at the bottom of the window
If the network is hidden, you will see a check mark in the box next to Create Hidden Network. If the box is not checked, then your network is not hidden...so there is no way to "unhide" a network that is not hidden in the first place.....and you might want to contact Canon support for help on how to set up your printer.
If you do see that the box is checked, then remove the check mark to "unhide" your network, click Save, then click Update and allow a full minutre for the AirPort Extreme to restart.

HP printing with AirPort Extreme

I have a imac with Intel, OSX 10.6. I am using a HP Photosmart C7280 All-in-One printer, and have been for a few years and it has worked extremely well. Earlier this year my old airport extreme went bad and I purchased the latest one. It has the latest updates available. When I got the new Airport Extreme the directions said to plug the printer via USB cable into the Airport. I have been through the system preferences, deleted and added the printer, went through the manual set-up for the Airport Extreme, rebooted everything and it will NOT print. The Airport Utilities recognizes the printer and it tries to print and stops giving me a message of "Printer Paused", or printer offline. When I hit "resume", the printer cycles a bit and them goes to "Printer Paused" again. Everything worked great until I purchased the new Airport Extreme.
The printer works excellent when plugged into the back of my imac, however, it does not make my wife happy because she can't print from her laptop. My Son brought a friend home with him for the weekend that is a Software Engineer. He downloaded software and drivers and installed them and he could not get it to print with the USB cable plugged into the Airport either. He worked with it for 4 hours. The HP printer just will not communicate with the Airport. I have also been getting a message this evening that one of my ink cartridges has expired. I can shake it and it appears to be almost full. I opened a new one and get the same message that it is expired. I have had the new one for several months though because I hate running out of ink.
Any help would be most appreciated.

I am not exactly the sharpest tool in the shed when it comes to setting this stuff up. I was hooking the printer up to the Airport Extreme because the set-up instructions said to. When the software engineer was here, he could not get the wireless on the printer to find the Airport Extreme. The kid is pretty sharp but was under a lot of pressure to get done so that he and my Son could get on the road. He wasn't expecting to get into the hassles of setting this up.
This is probably mostly because of the name I have given to the Extreme being too long and not remembering, or KNOWING anything about this. I have given the Extreme one name and the network another. I don't know where the set-up instructions are and he was trying to guess. I just tried doing as you said to make the printer wireless but failed for the same reasons he did. I got a message to go back and check the set-up. I am not sure what I am supposed to check for. I guess I will have to change some of the set-up information on the router as far as naming the router and network.
When I got this pinter I did not have v.10.6 on the imac at the time. However, when I downloaded the software from HP, it was for 10.6 and 10.7. I just a few minutes ago got the printer to work with the USB cable plugged into the computer, actually a USB hub. Just a few minutes after i got the printer working by hooking it to the USB hub, a software update popped up for a HP printer update. For a bit of information, I have had problems with concentration since several war injuries in Viet Nam and I get lost easily. I don't mean to use this as an excuse, just explaining that I will be a bit slow following you. I was a Senior Radio Repairman and Communications Chief in the Army and head of the Crypto Center. Now I feel like a lost ball in high weeds. I can still work things out by reasoning to an extent, but sometimes it is very frustrating, so I ask that you bear with me.
Ed

Can't print with Airport Extreme

I am having trouble printing with Airport Extreme.
My printer is connected to the AE but every time I try to print I get a printer offline message.
I have tried in the past to print wirelessly but have given up.
I just bought a new MacBook Pro so I thought I would give it another go.
Thank you.

Not very much to go on here but I'll give it a stab.
Go to the Airport Utility program located in Applications/Utilities folder.
Run this and select "manual setup" for your AE displayed on the left.
Hit the Printers icon on the top. Your shared printer should be displayed here. If it's not, then ensure it's powered on, good usb connection etc.
After this shows a usb printer connected then go to System Preferences>Print & Fax. You'll see printers you have setup before on the left. A green icon usually means they are available. If print doesn't work to the desired printer the best thing to do is remove the previous definitions by highlighting the printer and hitting the "-" icon.
Now hit the "+" sign and define the shared printer. It should be listed in the resulting "add Printer" dialog. Highlight, change any naming info and click "add".
Printer should now be available. I'm assuming a supported printer that have the device drivers loaded on your system.
That's all I got.

How to connect my iPad, Brother printer, and AirPort Extreme?

How to connect my iPad, Brother printer, and AirPort Extreme?

I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

Setting up a Apple Airport Extreme to work on the Telecom New Zealand Broadband network?

Has anyone had any success in setting up their airport extreme to work on the Telecom New Zealand broadband network without having to connect it to the modem which NZ Telecom supply?
Any advice and tips would be welcomed!

1. Since a "router" is needed next to the cable modem and before the ethernet switch, should we put the new Extreme in that basement location? Or, should we instead put the new Extreme somewhere on the main floor of the house (connected by ethernet) and leave the old one where it is?
Assuming the older Extreme is no older than Gen3 or Gen4 it is a perfectly adequate router for the speeds that cable will generally give you.
And therefore it is best to bridge the new AC extreme and use it upstairs via ethernet. That will then give you the best wireless in the most suitable area of the house.
2. Should we somehow bridge the two Airport Extremes (the old one and the new one) into one wireless network?
Yes, what is called roaming network. Both units create a wireless network.
You simply setup same name and same security/password on all the devices for wireless. The wireless channels are the differentiator.. and you can either leave that on auto or take some control over it and set manually. I would be inclined to do it manually just because the AC wireless needs the 149 channel for high speed AC.. so you do not want the old Extreme in the basement using that. Force that one to channel 36 or 40. However it is likely to work itself out ok on auto.. but I recommend you check it.
The apple docos on roaming are rather ancient..
Here is a post with newer info.
Setting Up Roaming - New AirPort Extremes and Utility
3. Should we go a further step and also bridge in one or both of the old Airport Express units, perhaps on the top floor of the house for example?
Yes, if you have a black spot with poor wireless you can add the Express to help. The old ones are single band and will probably work better at 2.4ghz but whatever suits you.. perhaps setup one on 2.4ghz and one on 5ghz.

My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Any suggestions?

EPSON Stylus CX4800 All-in-One Printer
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

Can i plug printer into airport extreme while it is on

Can I plug a usb printer into airport extreme while it is on?

I cannot find airport in finder, don't know how to turn it off.
You will have to pull the power plug from the back of the AirPort Extreme to power it down. Wait a few seconds, then plug the cord back in.
Or, you can pulll the plug where the power supply plugs into the wall socket if that is easier.

Canon MX920 not responding when hooked up over wifi as WPS printer on Airport Extreme, any ideas?

Canon MX920 not responding when hooked up over wifi as WPS printer on Airport Extreme, any ideas?

Ping the IP address of the printer.
If you are doing this from windows, have you installed the airport utility for windows?

How do I make iPad add a printer using airport extreme?

How do I make iPad add a printer using airport extreme?

Please check this Apple Support article: Apple Support - AirPrint Setup and Troubleshooting

How do I install an HP C4100 printer to airport extreme?

I can connect my C4100 via USB directly to my laptop, but I don't know how to install it to airport extreme. When I attempt to print using airport extreme, I get a connection failure. Can you provide instructions? (I am a new MAC user).
Thanks.

Hi there,
this morning I resolved the printing issue with my HP psc 1217 All in one.
I was almost ready to go into the next computer store to buy a airport compliant device when I found this link for more than 600 printer drivers:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
My psc 1217 is not directly listed, but works well with the drivert for the 1210 device.
the photosmart C4100 is also listed so it should work as well.
What you have to do is:
go to the page: http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
1. download the package: Foomatic-RIP (88k) and install
2. download the package: espgs-7.07.1.ppc.dmg (5.4MB) and install
3. download the package: hpijs-2.7.6.U.dmg and install
go to the printer manager and select the driver from the list you will see a bunch of newly installed printers.- Works well for me and allows me to keep my loved psc1217.
Cheers,
Torsten

Setting up PC to print on Airport Extreme Network

I just purchased an iMac and Airport Extreme. I've set up my printer on the Airport Extreme Network and can print from the iMac. While I've got the PC on the network, I'm having troubles setting up the printer. When I try to "Add a Printer" I'm not sure how to find the network and correctly setup the printer. This has to be any easy thing to do... Any suggestions?

Hello Jklink. Welcome to the Apple Discussions!
If not already, be sure to install Bonjour for Windows to facilitate printing to an AirPort base station.
(ref: Printing to an AirPort Extreme Base Station from Windows XP & Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows)

What are the setting for a p1102w printer does Airport Extreme have to have so the printer can find it?

I recently bought an Airport Extreme and a HP P1102W printer. The printer can not find the Airport Extreme network, even after turning off the network security. Is there a setting that needs to change so the printer will see the network? I am using a MacBook Pro.

I only have an iPad. I consulted HP Product Support and they told me to activate WPS on my E1200 router. The printer then connected to the router and obtained an IPv4 address. But it changed the netwrok name and disconnected my iPad. Initially my network had a default name Ciscoxxxxx but now it created a new network Cisco_WPS_nnnn. I tried to join this network but it was asking me for a 8-character password that I don't know. Linksys support asked me to upgrade to EA4500 router. But since i have Apple TV, iPad and iPhone, I thought I would buy an Apple router instead. But before I jump in this direction, I want to make sure that it will work for me. I know I can return this product but I don't want to turn this into a major project. Thanks.

Trouble setting up printer on airport extreme

Similar Messages

Maybe you are looking for