Trouble setting up simple SmartAction

My company has provided everyone with new RAZR M phones. My phone has the 4.1.1 OS. Several co-workers have set up a simple SmartAction to disable mobile data when their phones are connected to a wi-fi network. Here are the steps they took:
SMARTACTION >> CUSTOM >> TRIGGERS >> WI-FI NETWORK >> ANY WI-FI NETWORK >> ACTIONS >> SET MOBILE DATA >> TURN MOBILE DATA OFF
When I attempt to set up the same SmartAction, I can select the "Wi-Fi Network" trigger, but the "Set Mobile Data" action is disabled (dimmed out). When I select the action first, just the opposite happens: I can select "Set Mobile Data," then "Turn Mobile Data Off;" however, when I go to select the trigger, "Wi-Fi Network" is disabled.
I have killed all other SmartActions that had been setup on my phone, so I don't believe this is the problem. The phone seems to think that my trigger/action choices are in conflict. The maddening part is my co-workers are not experiencing this issue and they have the same exact phones.
I am new to the Android OS, so it is entirely possible I am missing something simple. Can someone help me figure this out? It's driving me nuts!

Thanks for reaching out to us, topcat1962.
It can take some getting used to when it comes to operating a new phone with a new Operating System.
I was able to duplicate the steps you have provided me with.
I want you to soft reset the phone to see if it is still problematic.
http://bit.ly/PLtWM9
Tamara H.
Follow us on Twitter @VZWSupport

Similar Messages

Having trouble setting up my website. It's probably a silly mistake.

So I've registered a domain and hosting plan with A Simple Orange which had a pretty good deal since I had a coupon for 20% off. I've tried using Joomla to manage my website, but I couldn't get the hang of it. So I'm trying out iWeb 09' now and just having trouble setting it up. I've gone to me.com and added my website and added the CNAME correctly I hope. Here is a picture. http://imgur.com/XI8Lw.png
Next I opened iWeb and setup MobileMe in the preferences panel. I've tried publishing the information from iWeb to my website, but my home page doesn't change. You can see here at RyanSchefer.com that it's just plan

No. Your CNAME setting is not correct. The CNAME and web.me.com are correct with web.me.com being your host. However, your domain name is incorrect - don't understand why you have put mobileme before it? You just enter either your domain name on its own so domain.com or you need to set up two separate CNAME entries, one being for www, CNAME, web.me.com and then one being @, CNAME, web.me.com. The @ stands for your domain name and the www is your sub domain.
Try altering this and it should work okay.

HT201250 I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to ba

I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.

Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

Hi having trouble setting my airport extreme for guests?

hi having trouble setting my airport extreme for guests?

This is likely because you have the AirPort Extreme connected to a modem/router, or gateway device.....and not a simple modem. Can you provide the make and model number of your "modem", as we previously asked?

Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry

Having trouble setting up email accounts in the mail app?

Hi Apple community,
I am having trouble setting up my email accounts with the osX mail application. I have two accounts, an outlook and my college email through google. When I try to add the outlook account the prompt says that it cannot connect to the server and when I try my college mail i get the following prompt.
"Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Please note that my college account is run by gmail and ends in murraystate.edu
Thanks, Will.

Hey will,
okay for your college email. Heres what you do.
Try adding your email and wait for the message to come up
Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Once it does, you will notice 2 extra boxes One says username and the other password. You will notice that the username will not have @murraystate.edu
Add this and continue and this should now be added as an email account and should be able to receive emails as normal.
For your outlook emails, I would recommend using the following article to set it up. It is fairly straightforward.
http://howto.cnet.com/8301-11310_39-57602775-285/how-to-set-up-mac-mail-to-use-i map-for-outlook.com/
Hope that helps.

Having trouble setting up FaceTime. keep giving me Apple ID password

having trouble setting up FaceTime. trouble at verifying use I'd. I have my email setup with different password since I have tw setup email. my Apple ID has different password. same email name.

Hello sangjaimepark,
Thank you for the details of the issue you are experiencing with activating FaceTime. I recommend reviewing the article below for FaceTime activation issues. When trying to activate FaceTime, you will need to use the email address you use for your Apple ID and your Apple ID password and not your email password:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thank you for using Apple Support Communities.
Best,
Sheila M.

Having trouble setting up network

Hi guys,
I just recently moved to a new house and am having trouble setting up the network with my airport extreme. There is a cable modem that is networked to the house so that every room has an outlet.
I connected the airport to one of the outlets with my macbook and when I create network, I cannot connect to the internet wirelessly even though the macbook detects a network when I set it up with bridge mode. But hard wired through the router I can surf the web as I am doing right now.
When I hit share an IP address, the internet does not work at all. It seems to work fine with my old netgear router, but would prefer using the airport.
I've also reset the airport as well with still no luck. Any help would be appreciated. Thanks

Have you tried powering down the modem for 5 min and then turning on with the ethernet connected to the WAN port of airport extreme?

Having trouble setting up e-mail on new iPhone 4s. I would like to sync with my outlook mail, contacts

I am having trouble setting up my email and syncing my outlook calendar wiht my new iphone 4s.

How do you connect to the internet?
Most of the time, the problem lies here. You can try a couple of things. First, try only 3G or carrier data. Then, try only wifi. If that still doesn't work, your only other option is to try a different hotspot.
I had the same problem before when I updated to iOS 4.3. I thought it was the update at first. I usually have the carrier data turned off because my plan doesn't have an unlimited provision for it. I forgot that I also switched ISPs from DSL to a visibility unit package - meaning I had to setup my laptop so that I could get wifi from it. I realized this when I visited a friends house that I knew I could connect properly before.
My problem was with my laptop. It seems that Little Snitch blocks the ports being used for mail and push notifications. I haven't figured it out exactly since I still can't get email when I'm using my laptop connection. But, it works fine when I'm using ONLY 3G or both/wifi only if connected to a different hotspot.
Hope that helps.

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

MSI X58 Pro - I'm having trouble setting up my first Raid 0 Array

Hey guys! I have an i7 920, X58 Pro, 3x2GB DDR3, Radeon 5850, 640GB WD Black (Windows 7 64 bit + applications) and 1TB Samsung F3 (backup) system and I'm having trouble setting up a raid 0 array. I recently decided to purchase two additional 1TB Samsung F3 harddrives in order to create a raid 0 array, while still keeping my original two harddrives separate. I installed the new harddrives today, installed the JMicron drivers that were on the drivers disk that came with my motherboard, went into the bios, and changed it from IDE to RAID. I then went into the raid bios, selected the two new harddrives and selected raid 0, saved everything and tried to load Windows and Windows refuses to boot up. I got an option to try fixing Windows but that didn't end up fixing anything. Finally, I was forced to go back into the bios and switch it from RAID back to IDE just to get Windows to boot up again. Does anyone know what I need to do in order to get this raid 0 to work? Thanks a lot in advance for your help!

Perhaps create a software RAID? You can do it in Windows through Control Panel --> Administrative Tools --> Computer Management --> Disk Management.
A quick guide: http://www.softwaresecretweapons.com/jspwiki/windows-7-software-raid-disk-partition-and-volume-context-menus

I just got a new ipad 2 but I having trouble setting it up, can someone help me. thank yoy

I just got a new ipad 2 but I'm having trouble setting it up, can someone help me?

Please read Chapter 2.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Trouble Setting Classpath on Windows XP

I'm having trouble setting up a classpath on Windows XP for SDK1.3.1_04.
I've tried Control Panel\Advanced\Environment Variables\System Variables. There was a Path variable present, to which I've added:
c:\jdk1.3.1_04\bin;
There wasn't a Classpath variable present though. I've tried adding it myself in System Variables as follows:
Variable name: Classpath
Variable value: set classpath=.;
But no joy. When I run "set" from the command prompt, there's no classpath present.
I'd appreciate any help.
Cheers.

Hi,
I am running on XP (unfortunately), but also win2000 and win98.
Setting up the classpath is not a problem, although if you are logged in as root, then it does not always show correctly.
Try logging back in as yourself and then checking the classpah through the set command.
Altrnatively, if this is not the problem, actualy try a reboot. which should not be necessary.
best
kev

Trouble setting up hp designjet 5500 printer windows 7

Hi there i am having slight trouble setting up my hp designjet 5500 uv 60" printer as i dont have a installation disc !
so have looked on hp site for the drivers but they are not working for some strange reason ?
i have purchased a parralel port to usb cable and also have ethernet cable ,do i need some king of software to run the printer as i still have eprint & share from my last 42" printer i had a few years back ? but when i go to add a printer in there it cannot find it ? any help would be greatly appriciated ,thanks in advance.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found if the above did not resolve your issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

i'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy.

Trouble setting up simple SmartAction

Similar Messages

Maybe you are looking for