Trouble setting up

Just received my iPhone 5 and have to verify my apple id with security questions I have no idea of answers to, honestly cannot remember being asked them to start. Every time I try to reset or seek information on how to i hit a brick wall, it also unable s me to access mail with the same problem does not recognise password can anybody help ?

Go here:
https://expresslane.apple.com/Issues.action
Ask for assistance, or call AppleCare.

Similar Messages

Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry

Having trouble setting up my website. It's probably a silly mistake.

So I've registered a domain and hosting plan with A Simple Orange which had a pretty good deal since I had a coupon for 20% off. I've tried using Joomla to manage my website, but I couldn't get the hang of it. So I'm trying out iWeb 09' now and just having trouble setting it up. I've gone to me.com and added my website and added the CNAME correctly I hope. Here is a picture. http://imgur.com/XI8Lw.png
Next I opened iWeb and setup MobileMe in the preferences panel. I've tried publishing the information from iWeb to my website, but my home page doesn't change. You can see here at RyanSchefer.com that it's just plan

No. Your CNAME setting is not correct. The CNAME and web.me.com are correct with web.me.com being your host. However, your domain name is incorrect - don't understand why you have put mobileme before it? You just enter either your domain name on its own so domain.com or you need to set up two separate CNAME entries, one being for www, CNAME, web.me.com and then one being @, CNAME, web.me.com. The @ stands for your domain name and the www is your sub domain.
Try altering this and it should work okay.

Having trouble setting up email accounts in the mail app?

Hi Apple community,
I am having trouble setting up my email accounts with the osX mail application. I have two accounts, an outlook and my college email through google. When I try to add the outlook account the prompt says that it cannot connect to the server and when I try my college mail i get the following prompt.
"Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Please note that my college account is run by gmail and ends in murraystate.edu
Thanks, Will.

Hey will,
okay for your college email. Heres what you do.
Try adding your email and wait for the message to come up
Trying to log in to the Exchange server “autodiscover-s.outlook.com” failed. Make sure the email address and password you entered are correct, then click Continue."
Once it does, you will notice 2 extra boxes One says username and the other password. You will notice that the username will not have @murraystate.edu
Add this and continue and this should now be added as an email account and should be able to receive emails as normal.
For your outlook emails, I would recommend using the following article to set it up. It is fairly straightforward.
http://howto.cnet.com/8301-11310_39-57602775-285/how-to-set-up-mac-mail-to-use-i map-for-outlook.com/
Hope that helps.

Having trouble setting up FaceTime. keep giving me Apple ID password

having trouble setting up FaceTime. trouble at verifying use I'd. I have my email setup with different password since I have tw setup email. my Apple ID has different password. same email name.

Hello sangjaimepark,
Thank you for the details of the issue you are experiencing with activating FaceTime. I recommend reviewing the article below for FaceTime activation issues. When trying to activate FaceTime, you will need to use the email address you use for your Apple ID and your Apple ID password and not your email password:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thank you for using Apple Support Communities.
Best,
Sheila M.

Having trouble setting up network

Hi guys,
I just recently moved to a new house and am having trouble setting up the network with my airport extreme. There is a cable modem that is networked to the house so that every room has an outlet.
I connected the airport to one of the outlets with my macbook and when I create network, I cannot connect to the internet wirelessly even though the macbook detects a network when I set it up with bridge mode. But hard wired through the router I can surf the web as I am doing right now.
When I hit share an IP address, the internet does not work at all. It seems to work fine with my old netgear router, but would prefer using the airport.
I've also reset the airport as well with still no luck. Any help would be appreciated. Thanks

Have you tried powering down the modem for 5 min and then turning on with the ethernet connected to the WAN port of airport extreme?

Having trouble setting up e-mail on new iPhone 4s. I would like to sync with my outlook mail, contacts

I am having trouble setting up my email and syncing my outlook calendar wiht my new iphone 4s.

How do you connect to the internet?
Most of the time, the problem lies here. You can try a couple of things. First, try only 3G or carrier data. Then, try only wifi. If that still doesn't work, your only other option is to try a different hotspot.
I had the same problem before when I updated to iOS 4.3. I thought it was the update at first. I usually have the carrier data turned off because my plan doesn't have an unlimited provision for it. I forgot that I also switched ISPs from DSL to a visibility unit package - meaning I had to setup my laptop so that I could get wifi from it. I realized this when I visited a friends house that I knew I could connect properly before.
My problem was with my laptop. It seems that Little Snitch blocks the ports being used for mail and push notifications. I haven't figured it out exactly since I still can't get email when I'm using my laptop connection. But, it works fine when I'm using ONLY 3G or both/wifi only if connected to a different hotspot.
Hope that helps.

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

MSI X58 Pro - I'm having trouble setting up my first Raid 0 Array

Hey guys! I have an i7 920, X58 Pro, 3x2GB DDR3, Radeon 5850, 640GB WD Black (Windows 7 64 bit + applications) and 1TB Samsung F3 (backup) system and I'm having trouble setting up a raid 0 array. I recently decided to purchase two additional 1TB Samsung F3 harddrives in order to create a raid 0 array, while still keeping my original two harddrives separate. I installed the new harddrives today, installed the JMicron drivers that were on the drivers disk that came with my motherboard, went into the bios, and changed it from IDE to RAID. I then went into the raid bios, selected the two new harddrives and selected raid 0, saved everything and tried to load Windows and Windows refuses to boot up. I got an option to try fixing Windows but that didn't end up fixing anything. Finally, I was forced to go back into the bios and switch it from RAID back to IDE just to get Windows to boot up again. Does anyone know what I need to do in order to get this raid 0 to work? Thanks a lot in advance for your help!

Perhaps create a software RAID? You can do it in Windows through Control Panel --> Administrative Tools --> Computer Management --> Disk Management.
A quick guide: http://www.softwaresecretweapons.com/jspwiki/windows-7-software-raid-disk-partition-and-volume-context-menus

I just got a new ipad 2 but I having trouble setting it up, can someone help me. thank yoy

I just got a new ipad 2 but I'm having trouble setting it up, can someone help me?

Please read Chapter 2.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Trouble Setting Classpath on Windows XP

I'm having trouble setting up a classpath on Windows XP for SDK1.3.1_04.
I've tried Control Panel\Advanced\Environment Variables\System Variables. There was a Path variable present, to which I've added:
c:\jdk1.3.1_04\bin;
There wasn't a Classpath variable present though. I've tried adding it myself in System Variables as follows:
Variable name: Classpath
Variable value: set classpath=.;
But no joy. When I run "set" from the command prompt, there's no classpath present.
I'd appreciate any help.
Cheers.

Hi,
I am running on XP (unfortunately), but also win2000 and win98.
Setting up the classpath is not a problem, although if you are logged in as root, then it does not always show correctly.
Try logging back in as yourself and then checking the classpah through the set command.
Altrnatively, if this is not the problem, actualy try a reboot. which should not be necessary.
best
kev

Trouble setting up hp designjet 5500 printer windows 7

Hi there i am having slight trouble setting up my hp designjet 5500 uv 60" printer as i dont have a installation disc !
so have looked on hp site for the drivers but they are not working for some strange reason ?
i have purchased a parralel port to usb cable and also have ethernet cable ,do i need some king of software to run the printer as i still have eprint & share from my last 42" printer i had a few years back ? but when i go to add a printer in there it cannot find it ? any help would be greatly appriciated ,thanks in advance.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found if the above did not resolve your issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

i'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy.

Here's my trouble: set up my linksys router ~ a year ago,...

Here's my trouble: set up my linksys router ~ a year ago, all is fine. I recently wanted to set up WEP security. I go to the router's web-based setup page, go to wireless security, pick WPA personal, TKIP, and enter a WPA Shared Key. Voila. However, now I cannot connect. When I try to connect it can't seem to get past "authentication", and times out. I'm not asked for a password or key at any point. Suggestions?
Thanks!

how old is your wireless computer? if you are not asked for the network key that means that the computer is recognizing the other saved networks on your computer. go to the choose a wireless network screen(right click on wireless network icon on the bottom right side of your screen and click on view available wireless network). click on the "change advanced settings" option on the left side of you screen.after that click on "wireless networks" tab then under preferred networks box below remove all the preferred networks that you see there. even if you see your network remove it as well..and after that try to connect to your network again...
sometimes those preferred networks blocks you to connect to a wireless network...

Trouble setting up hard drive

i'm having trouble setting up my hard drive. i have a 40GB with 5 partitions:
part1 (primary) - slackware install with boot flag
part2 (primary) - /home directory
part3 (primary) - 1GB swap
part5 (logical) is ~10GB storage
part6 (logical) is ~10GB free space
i enter the setup utility, set up part6 as a linux partition, logical, with boot flag, write the changes, then quit. i think once or twice it prompted me to reboot, so i rebooted.
then i tried to set the filesystem mount points. i select part3 for swap, part6 for /, and then Done (will manually mount /home later, don't want to mess with it now).
the installer seems to successfully set up the swap, then it fails to create the reiserfs on part6, with an error that it can't mount the partition:
Error mounting /mnt/
what is the problem?
appreciate any help - arch looks awesome, can't wait to get it going!
edit: the problem was indeed the logical partitions. it kind of sucks though, b/c now i have to use the full 20GB for the arch install, which will probably only take 1 or 2 GB. i wanted to keep that at 5-10GB at the most, because i want to use the rest of the disk as storage. well, i'm installing on the 20GB temporarily for now to check it out. if anyone has any pointers about how i can better structure the disk i'd appreciate it.

I dont know about lilo, which I guess you use because of Slackware, but you do not need any partition flagged as bootable with grub installed to the MBR.
Here is my lappie:
hda1 : 83 Linux 30Mb
hda2 : 83 Linux 30Gb
hda3 : 83 Linux 450Mb
hda4 : 83 Linux 40Mb
The 30 & 40M patitions are just there for braneded distros that think you need swap or boot and therefore force them on you.
But what may interest you is that I do not have any of them flagged as bootable. The bootable flag makes absolutely no difference whatever to this machine, it boots wherever grub directs it to.

HT201250 I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to ba

I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.

Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

Trouble setting up

Similar Messages

Maybe you are looking for