Trouble Sharing, Trouble Sharing
Well, I am once again having troubles sharing my video. I use my Canon 3Ti and use Raw for my video and images. I use a program to pre-render my video to Apple ProRes 422. Then I import that into FCPX. I actually got it to share a copy of my latest video but only in Apple 720 Resolution. I tried in 1080 and it just stalled out at 10% completed. I tried to share it like I normally do as Apple ProRes 422 then open that in Quicktime to send it out as a smaller format for the web. I have done something a bit different in this video but nothing that I figured would cause a problem. One is I used a stock sound and I used a theme CoverFlux for the starting of my video. Other than that nothing changed from my last video except that I updated it again.
Pete
I had it set to share in full Apple ProRes 422 native of my rendered video from raw and it stalled at 1% for over 4 hours.
Well I do have my settings for at least images on RAW. I assumed it was the same but I see it is not. I was told that FCPX works best with Apple ProRes 422 format so I have been pre rendering to that before importing. Had been working great. I found that it actually did out put but it did take longer the last time. Going to try a few other things to see if it will speed things up. One was to not have the video prerender when imported. That did help until the last upgrade.
I really don't like playing with things. They should just work.
Pete
Similar Messages
-
Am having all kinds of trouble enabling Home Sharing on Apple TV 3. Had been working previously, but now I am unable to share files between TV, Ipods and iMac. I have tried restarting all hardware, systems and connections. I recently upgraded modem, would this have an effect on connectivity?
U may need to check the settings on ur PC or Mac.
-
I am having trouble getting screen sharing to work. Video/audio chat works fine without incident. When I attempt to start a screen sharing session I get the error: "Failed to start Screen Sharing because: Screen sharing could not be established."
Screen sharing is enabled under the "Sharing" System Preferences section.
Below is the errors that were logged to the console:
4/3/08 8:50:37 PM iChat[141] Detected bandwidth (kbits/s): 249 up, 249 down. (00000000)
4/3/08 8:50:37 PM iChat[141] No iChat delegate set for vcc:initiateConferenceCompletedForParty: 4/3/08 8:50:34 PM [0x0-0x15015].com.apple.iChat[141] CSSM_DecryptData: CSSMERRCSP_OPERATION_AUTHDENIED
Any help would be greatly appreciated!And in iChat's Video menu Screen Sharing is active ?
Also are the ports for iChat open in any modem or router ?
1:30 PM Saturday; April 5, 2008 -
Having trouble seeing a shared gmail calander
having trouble seeing a shared gmail calander on iphone 5s
That seems to be a permissions problem. Where is your shared Aperture Library located?
If you store it in a "Shared" Folder, the access control lists may cause trouble. Sharing a library works best, if you keep the Aperture Library on a separate external drive or on a disk partition with the "Ignore Ownership on this Volume" set for this drive or partition. This works well also with Aperture 3.3., at least for me.
Regards
Léonie
P.S. To set the "Ignore Ownership on this Volume" flag, open the volume with "File > Get Info" from the Finder, onlock the padlock in the lower right corner and enter your admin-password. Then enable the flag in the "Sharing and permissions" brick of the panel. -
Anyone else having trouble using Home Sharing on AppleTV (3rd Gen) on wired network?
First my setup: I'm on a Mid-2010 MacBook Pro, D-Link DIR-615 Router, AppleTV (3rd Gen).
Problem: Couldn't connect to Home Sharing via the AppleTV.
I was having serious trouble getting Home Sharing working on my AppleTV (3rd Gen). I spent an hour on the phone with Apple Tech Support. Then, after forwarding the proper ports (http://support.apple.com/kb/HT2463?viewlocale=en_US), spending another hour and a half with D-Link. Then I even called my ISP. Anyway, after A LOT of futzing around, I finally realized that Home Sharing is working on my iPhone (4S), so maybe it's a wifi thing. I unplugged the ethernet cable from my AppleTV and connected it to my wireless network. Keep in mind, same network, just now it's connected via a different channel (wireless now versus wired before).
Suddenly, works just fine, no issues at all.
What's going on? Anyone have any idea? My port forwarding is now not even set to the correct IP address of my AppleTV (was ...100 when it was wired, but on wifi it grabbed ...103). It would be great to know what's going on. Also, hopefully this helps someone else having the same problem.Yesterday I bought Apple tv, and connected it on a free LAN port on my DLINK DIR-615.
All settings are ok , appleID en home sharing are set en activated but nothing shows...
The problem seems simular on yours. Tonight when I get home, i'll disconnect de LAN and try wireless....
We will see. Thanks fot the hint -
I am having trouble using home sharing.
I am having trouble using home sharing. My brother is able to access my libary but I can't access his. Even though we put in his ID for me to access, it just loads and gives up. Can anyone help me out? My OS is windows vista and my brother's is windows 7.
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Troubleshooting Security Software -
i am having trouble with home sharing 11.0.1 and setting it up with apple tv and i pad
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Troubleshooting Security Software -
Java - Shared archive: sharing disabled for server vm ?
Hi,
My mac is PowerMac G5(1.8Ghz) + leopard server 10.5.1.
I have a question.
After typing *java -version*, the following messages are shown.
*Shared archive: sharing disabled for server vm*
*java version "1.5.0_13"*
*Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_13-b05-237)*
*Java HotSpot(TM) Client VM (build 1.5.0_13-119, mixed mode)*
What is *Shared archive: sharing disabled for server vm* ?
Using my other macs, iMac(Intel 1.8GHz) and PowerBook G4(1.5GHz) + leopard client-10.5.1,
the message is
*java version "1.5.0_13"*
*Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_13-b05-237)*
*Java HotSpot(TM) Client VM (build 1.5.0_13-119, mixed mode, sharing)*
So, the difference is "sharing".
Anyone know what it means?I'm getting the same message. I'm intrigued. This would seem to be something to do with the new version of Java
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_13-b05-237)
Java HotSpot(TM) Client VM (build 1.5.0_13-119, mixed mode, sharing)
I don't get the message when doing java -version, but I do get it when starting JBoss:
./run.sh: line 80: ulimit: open files: cannot modify limit: Invalid argument
run.sh: Could not set maximum file descriptor limit: unlimited
=================================================================
JBoss Bootstrap Environment
JBOSS_HOME: /usr/local/jboss-4.0.2
JAVA: java
JAVA_OPTS: -server -Xms256m -Xmx512m -Dprogram.name=run.sh
CLASSPATH: /usr/local/jboss-4.0.2/bin/run.jar:/lib/tools.jar
=================================================================
Shared archive: sharing disabled for server vm
15:42:09,736 INFO [Server] Starting JBoss (MX MicroKernel)...
It doesn't seem to cause any trouble, but it would be good to know what it's all about (man java doesn't help).
Bruno. -
Family sharing not sharing payment information
Family sharing not sharing payment information
We have two iPhones on iOS 8. Previously my Apple ID was logged into my wife's phone for iTunes and app purchases to share purchases (she's had her own apple is for iCloud all along) . I set up family sharing, on my phone first. I'm the organizer. I invited my wife, switched her Apple ID in settings in iTunes and app purchases to her own Apple ID. Both of us can see we are in the family in iCloud settings. But in the iTunes part it looks like normal, with seperate accounts. If we view purchase in the App Store both accounts are listed (and looks like both accounts show all the same apps that I've purchased previous to setting this up).
Is that right?
More importantly when I go to make an iTunes purchase on my wife's phone, it doesn't try to use any shared payment. It wants to update HER credit card on her account.
My phone says the credit card is shared.
What setting have I missed here?
And I keep seeing this question asked but no clear answer. Will she loose access to any apps or music purchased before the family? They all show under her account now. Apple said somewhere that a legacy account would be allowed. I'm afraid to play too much with it after hearing people are getting locked out for a year.
Thanks for any help!!Your purchases will be charged against the Organizer's charge card on file, but they will reside under the Apple ID that you are purchasing them under (so if later, you were to leave Family Sharing, they would be "owned" by your Apple ID). If you have a gift card on file for your Apple ID, it will take the funds from the gift card first before going to the Organizer's charge card, but the entire set-up of Family Sharing is one that is designed to charge all purchases against the Organizer's card on file.
How is the set-up invasive, exactly? Family Sharing is primarily designed for families, especially ones with small children. The FAQs and ad pages are very clear about the fact that the Organizer pay for all purchases:
https://www.apple.com/icloud/family-sharing/
Cheers,
GB -
Trouble with home sharing after apple tv update
trouble with my home sharing after apple tv up date
Same here. iPhone, Mac Mini and Apple TV3 are all up to date. Logged in and out on each device and home sharing and airplay still don't work at all. Nothing shows up in the remote app. They're all on the same network and have been. The only thing I can think of is the most recent ATV firmware update, but why would my phone be unable to see my computer??
Any secret commands to try? -
Can't Find "DVD and CD Sharing" under Sharing
Hello, I got a new MacBook Air a week ago, and I couldn't find "DVD and CD Sharing" under sharing in system preferences. Is there any way to make it appear? I am trying to share the CD from a Windows computer, and I installed this on my Windows computer:
http://support.apple.com/kb/DL112
But there is still no DVD and CD sharing... Can somebody please tell me what to do? Thanks, I'd appreciate the helpDesmond,
There is no option because there is no DVD on a MBair. You enable DVD sharing on another Mac or PC. You're telling that other system to share it's DVD drive. When it's enabled on another system, you'll see "remote disc" on your MBair's finder bar.
Hope that helps.. -
Permissions Trouble on a Shared Drive
Hello out there,
I have setup a Lacie Ethernet Big Disk on an ethernet network connected through a Netgear GS748T switch. I am asking people to use it as a shared backup-drive among other things. I wanted to do a complete backup of all the files on there friday to take off-site and it had a lot of trouble with permissions which were basicallly looking like this:
Name Privilege
(unknown) Read&Write
everyone No Access
When I log in as admin and try to change these permissions and then propogate them to the items inside, it appears to be happening but the new permissions don't stick.
This is just a temporary situation until we get our backup systems automated and done properly but in the meantime is there a way to set up permissions to be read and write for everyone on that disk?
Thanks for your help out there,
Andrew
ps The shared drive has a static ip address, name and password and the computers that save to it run the gamut of OS 10.4 to 10.6 and even some windows PCsIs anybody out there? Can anybody hear me?
Have I posted in the wrong topic?
Do I smell?
Just trying to refresh my topic to see if there are any bites. Any info would be appreciated.
If you need to know more to answer, let me know.
Thanks,
Andrew -
File Sharing & Printer Sharing Problem
I have an Intel Duo Core 20" and an older G4 Flat Panel iMac. Both were connected to my old airport extreme with few or no problems. File sharing, printer sharing etc. worked great with virtually no delays.
I recently purchased and installed the new Airport Extreme. Both computers connect to the network created with no problem, ie: the internet, however when I try to connect from the Duo Core to the G4 via the network for file sharing,or printer sharing, my Duo Core freezes. The file sharing settings for both computers are set appropriately as before. I have shut off file sharing for both, restarted, then turned on file sharing on both but the issue continues.
Any suggestions? I'm pretty 'Apple Savy' but not a 'genious'.Sorry..one other note that may help in narrowing this down. When I go to print, the printer that is connected to the G4, shows up on the 'shared printers' list, however, it just never connects when selected. Just the 'beach ball of death'.
-
Greetings, community!
We have a troubles with MSL 2024 sharing between two physical DPM 2012 R2 servers.
After step SetSharedDPMDatabase -DatabaseName DPM01\MSSQLSERVER\DPMDB_DPM01 -DoNotMoveData by this GUIDE
http://flemmingriis.com/data-protection-manager-2012-r2-fiber-channel-tape-sharing-with-a-side-of-install-part-2/
our Library-Client DPM server console fall in crash with error:
And then:
We have no Errors in Application and System Logs.
Maybe somebody seen same errors?Hi,
This can happen if you ran the client side libray sharing commands on LCS server itself to enable
library sharing - this is wrong. This resulted in all the DPM SQL Stored procedures to be modified and point to itself and that causes the exception.
To resolve this problem, you will need to run commands to remove the client sharing on the LCS Server, then disable and re-enable tape library sharing on all the Client DPM Servers.
On the LCS DPM Server
From an administrative command prompt, run the following commands to undo the SQL Stored procedure changes associated with the client side sharing that causes the crash:
SetSharedDPMDatabase -removedatabasesharing
AddLibraryServerForDPM -dpmserverwithlibrary <LCS_FQDN> -remove (Use a fictitious server name
here)
The above commands will resolve the Console crash on the LCS Server. However, that also caused all the client DPM Server consoles to start crashing with the following popup when starting the DPM Console.
Microsoft .NET Framework
Unhandled exception has occurred in a
component in your application.
If you click Continue, the application will
ignore this error and attempts to
continue.
DLS Error:
SP='dbo.prc_Global_MM_Drive_GetReservationlevel'
Error=5001
You now have to disable and re-enable library sharing by running the following on all DPM Client servers.
On all DPM Client server(s)
Run the following commands to disable tape library sharing on the client:
SetSharedDPMDatabase -removedatabasesharing
AddLibraryServerForDPM -dpmserverwithlibrary <LCS_FQDN> -remove
Followed by these commands to re-enable library sharing on the client:
AddLibraryServerForDPM -dpmserverwithlibrary <LCS_FQDN>
SetSharedDPMDatabase -Instancename <LCS_FQDN>\MSDPM_INSTANCE_NAME
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Equivalence of two statment at point of view sharing in shared pool
Hello !
Please explain,
by what quantity of symbols hash-funtion defined what two statment is
equivalent (at point of view sharing in shared pool)
Best regards,
PaulHi,
If i understood your question correctly, you want to know when two or more statements share same cursor( in library cache). The reasons if it can use following
1) statement is prefectly identical.
2) Use same optimizer env
3) Use same user id who executes the statement
4) Use same session parameters
5) Use same bind datatype
6) Use same bind data length
7) Have same OPTIMIZER_MODE
8) If cursor is not purged.
Further reasons can be found in V$SQL_SHARED_CURSOR, that why cursor was not shared.
Hope this Helps
Maybe you are looking for
-
Send a instant message on the SAP screen
Dear All, Plz explain the process of sending an instant messges on the SAP screen (A small window comes with messge on the screen, irrespective of the transaction we are in) Hope i am clear i want. Regards Madhu
-
I had to have my computer reformatted in July, and am just now trying to install PSE9. When I tried to enter the serial number I got a dialog box that stated that this serial number was not valid for the trial. I bought this. According to my profile
-
Not saving the the line/link position in process designer
I've got a process which works fine, but when I open it in process designer, the line/links are not arranged correctly. It's strange that if I drag on the service icon, then the line/link will be rearranged nicely, then I save it and close the proces
-
We are unable to sync our iOS7 devices to iCal server.
We recently updated our internet to a higher speed and noticed that the calendar was not updating on our iOS devices anymore. A quick check showed us that the iPad and iPhones had not updated for some time. A lengthy Google search showed me that iO
-
Actiontec MI424-WR Version E wireless quit working
Over the last 2 days my home WIFI has stopped working. I can connect to the internet via an Ethernet cord but not wireless. I have tried all recommended procedures without success. How can I tell if my Hardware is broken or if it is something diff