Trouble Shooting Acrobat Installation

I receiced these errors when I tried to reinstall Acrobat. It was installed previously but now I'm getting error messages.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DW065, DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW065: Display requirements not met for {402F6F2E-5683-491C-977D-0CA599A07CAF} CS6 Design and Web Premium 6.0.0.0
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1310.Error writing to file: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\ViewerPS.dll.   Verify that you have access to that directory.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1310.Error writing to file: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\ViewerPS.dll.   Verify that you have access to that directory.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050:  - Acrobat Professional: Install failed

If you did not download a CS6 version from the Cloud, you need the Acrobat forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right to open the drop down list and scroll

Similar Messages

  • Trouble shooting the installation of itunes on Windows 7 64 bit?

    I have found some old discussions, which had solutions to installing itunes on a Windows 7, 64 bit system.  I am getting the following error, and can not get itunes to install:
    The Windoes Installer Service could not be accessed.  This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed.  Contact your support personal for assistance.
    Windows Installer is working for other programs.  I think it has something to do with permissions or Registry entries, but I have tried every other solution and I still get the same error.  The only solution I have not tried, is reinstalling the Windows installer, because I am able to install other programs, and I do not have a CD, only a recovery partition.
    Thank you for any assistance you can offer.

    Somehow "Apple Updates" was installed on my computer, and once I uninstalled that program, rebooted my computer, then iTunes installed fine.  So I am all set.  Thank you.

  • I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens.  I  trouble shoot it and it says incompatible application.

    I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens.  I  trouble shoot it and it says incompatible application.

    It sounds like an issue of trying to run XI on VISTA. That combination does not work. Info on both the Acrobat full version (including sub-version) and OS would help. It might also be an issue of running 11.0.0 on a system that needs the updates to work.

  • PS Elements 10 suddenly incompatible with Windows 7. Cannot open. Windows 7 not even an option on the incompatibility trouble shooter.

    Adobe tech people. How do i get the PS version I have been happily using to open again Suddenly it will not open and W7 is not even listed as an OS when I run the compatability trouble shooter. Is this Adobe's way of making me another version? VERY ANGRY.

    I had the same problem with my Satellite A505-S6005.  I keep everything on external drives/remote backup and ISO my installations because of problems with the CD/DVD on my previous laptop, so I thought turning this off would be handy.  Unfortunately, it also turned off virtual drives.  Unlike you, I had an error code 52.
    The upper/lower filters is what finally worked for me, but I had uninstalled the Eco Utility just prior to that, thinking that is where the power setting was initiated.  I'd had an icon in my tray indicating that ODD power was off but with no option to turn it back on.  Removing Eco removed that icon, but still no drive until I did the regedit.  Do you have this utility?  From what I've seen, the Protege has Easy Guard, which seems similar to Eco.  Maybe a conflict exists with that?

  • Iphone 4 not recognized and will not sync after latest itunes update.  I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

    iphone 4 not recognized and will not sync after latest itunes update.  I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES

    제품 : SQL*NET
    작성날짜 : 2002-11-24
    TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES
    (GENERATING TRACE FILE OF SQL*NET, NET8.X, AND NET SERVICES)
    ==========================================================
    PURPOSE
    이 글은 고객들이 Oracle Server의 Oracle Networking 제품들을 사용하다가
    Networking과 관련된 문제를 만났으나 스스로 해결할 수 없는 경우, 예를
    들어 http://metalink.oracle.com 에서 같은 case를 발견할 수 없는 경우,
    원인을 찾기 위하여 Networking 제품의 trace를 떠 보는 방법을 설명합니다.
    Explanation
    Oracle Networking 제품을 사용 중에 어떠한 문제를 겪는 경우 무엇보다도
    OS의 Networking Protocol Stack 쪽을 살펴보는 것이 선행되어야 합니다.
    일부 고객분들은 Oracle Networking 제품들이 OS의 Protocol Stack이 동작
    하는데 어떤 중대한 영향을 주는 것이 아닌가 하고 문의를 합니다만
    그러한 의문은 Oracle Networking 제품도 OS의 Protocol Stack을 사용하는
    하나의 network client라는 것을 이해함으로써 해소가 됩니다.
    Oracle Networking 제품도 OS의 Protocol Stack을 이용하는 하나의 network
    client이기 때문에 Oracle Networking 제품이 OS Protocol Stack의 동작에
    어떠한 식으로든 영향을 준다던가 하는 것은 있을 수 없기 때문입니다.
    고객의 관점에서 OS의 Protocol Stack은 정상적으로 설정이 되었다고 믿고
    있으며 기타 networking 환경을 정확히 판단할 수 없는, 예를 들어
    host설정은 잘 되어 있다고 믿고 있으나 firewall을 통해야만 하는 등의
    다소 접근하기 어려운 networking 환경에서 networking이 잘 되지 않는,
    예를 들어, Oracle Server에 연결이 잘 안되거나 연결 중 networking
    error가 발생하는 경우에는 http://metalink.oracle.com에서 같은 case를
    찾는 것이 가장 빠른 해결 방법입니다.
    그러나 드물게 http://metalink.oracle.com에서 같은 case가 나오지 않는
    경우 Oracle Networking 제품의 trace file을 떠서 원인을 찾게 됩니다.
    Oracle Networking 제품은 Oracle 7.x에서 SQL*Net, Oracle 8.x에서 Net 8.x,
    Oracle 9.x에서 Oracle Net Services라는 이름이 가지고 있으나 여기에서는
    편의상 모두 Oracle Networking 제품으로 부르도록 하겠습니다.
    아울러 여기서 언급하는 Trace File은 Oracle Server의 Trace File과
    다른 것입니다. Oracle Server의 Trace File은 database instance의 대한
    내용만을 기록하며 Oracle Networking 제품의 Trace File은 networking에
    대한 내용만을 기록합니다.
    Trace File의 작성 방법은 Oracle 7.x부터 9.x까지 같습니다.
    Solution Description
    1. Client가 되는 host에서 어떠한 문제를 경험한 경우, 간혹 문제의 발생
    빈도가 낮거나 network나 server 쪽에 이상을 느끼시면서도 문제를 확인하기
    여러운 경우가 있습니다. 이런 경우엔는 문제가 다시 발생될 때 까지
    Client에서 Client Trace File를 작성하여 보아야 합니다.
    a. prompt$ echo $TNS_ADMIN
    b. $TNS_ADMIN이 설정되어 있으면, prompt$ cd $TNS_ADMIN
    아니면, prompt$ cd $ORACLE_HOME/network/admin
    c. vi sqlnet.ora
    # 다음 line들을 추가
    TRACE_LEVEL_client=16
    TRACE_FILE_client=<filename>
    TRACE_DIRECTORY_client=<directory>
    TRACE_UNIQUE_client=TRUE
    :wq
    prompt$
    예를 들어, client가 Windows OS인 경우 다음과 같이 합니다.
    prompt> notepad sqlnet.ora
    TRACE_LEVEL_client=16
    TRACE_FILE_client=client
    TRACE_DIRECTORY_client=D:\temp
    TRACE_UNIQUE_client=TRUE
    prompt>
    d. SQL*Plus와 같은, 또는 사용하던 Client software를 계속 이용
    e. 다시 문제가 발생
    f. 작성된 trace file들의 날자를 보아 문제가 발생한 시간과
    거의 같은 시간에 작성된 file들이 있는지 확인
    prompt> dir D:\temp
    client_<PID1>.trc ...
    client_<PID2>.trc ...
    prompt>
    g. trace를 중단합니다.
    prompt$ vi sqlnet.ora
    TRACE_LEVEL_client=0
    :wq
    prompt$
    h. Trace Assistant를 이용하여 Oracle Networking 제품의 error code
    (이하 TNS error code)를 trace file에서 찾아냅니다.
    prompt$ cd <directory of TRACE_DIRECTORY_client>
    prompt$ trcasst <filename of TRACE_FILE_client>_<PID>.trc > trcasst.out
    prompt$ vi -R trcasst.out
    Trace Assistant (trcasst command)는 Oracle 8.x부터 제공되며,
    Oracle 9.x의 Trace Assistant를 사용할 것을 권합니다.
    i. oerr command로 tns error에 대한 error message를 봅니다.
    예를 들어, 흔한 경우 중에 listener가 실행 중이지 않거나 잘못된
    tnsnames.ora 설정으로 client가 listener가 service 중이지 않은
    network address로 연결을 시도하다가 TNS-12541 TNS-12560 TNS-511
    error가 차례대로 나왔다면 다음과 같이 하여 각 TNS error code에
    대한 message와 설명 및 해결방법을 볼 수 있습니다.
    prompt$ oerr tns 12541
    prompt$ oerr tns 12560
    prompt$ oerr tns 511
    j. Trace Assistant가 알려준 TNS error code를 http://metalink.oracle.com
    에서 검색하여 같은 case가 있는지 확인합니다.
    Web browser에서:
    1) Go to http://metalink.oracle.com, then login
    오른쪽 위 HTML frame에서 :
    2) "Advanced" Button을 누릅니다.
    오른쪽 아래 HTML frame에서:
    3) "Enter Keyword" text box에 tns error code를 모두 입력합니다.
    예를 들어, tns-12541 tns-12560 tns-511
    4) "Search" button을 누릅니다.
    k. http://metalink.oracle.com에서 검색이 거의 되지 않거나
    문제가 매우 이상한 경우 이 글 아래를 보시기 바랍니다.
    2. Client에서 SQL*Plus나 Oracle Client를 사용하는 다른 3rd party
    appliction은 잘 동작하나 유독 tnsping command에서 error가 나는 경우가
    드물게 있습니다. 이 때에는 tnsping command의 trace file을 작성해봅니다.
    prompt$ vi sqlnet.ora
    TNSPING_TRACE_LEVEL=16
    TNSPING_TRACE_DIRECTORY=<directory>
    :wq
    prompt$ tnsping <tns alias>
    3. Server, 즉 listener에 문제가 있다고 생각되는 경우 우선 listener의
    log file을 봅니다. listener의 log에 대해서는 bulletin.18364를
    이용합니다.
    4. listener의 trace file은 다음과 같이 설정합니다.
    listener의 trace 설정은 parameter 이름에 trace file을 작성하고자 하는
    listener의 이름이 오는 점, 설정 후 listener process를 restart해야 하는
    점 두 가지를 제외하면 나머지 절차가 앞서 설명드린 client와 같습니다.
    prompt$ vi listener.ora
    TRACE_LEVEL_<listener name>=16
    TRACE_FILE_<listener name>=<filename>
    TRACE_DIRECTORY_<listener name>=<directory>
    :wq
    prompt$ lsnrctl stop <listener name>
    prompt$ lsnrctl start <listener name>
    5. 만일 위와 같이 http://metalink.oracle.com을 검색하여도
    같은 case가 전혀 없거나 찾아낸 error message들이 원인과 관련이 없어
    보일정도로 매우 이상한 경우 다음과 같이 해봅니다.
    a. Oracle Software의 version과 OS의 version이 certification matrix에
    있는 지 확인합니다.
    Web browser에서:
    1) Go to http://metalink.oracle.com, then login
    왼쪽 menu에서 :
    2) "Certify & Availabilty" menu item을 click합니다.
    오른쪽 아래 HTML frame에서:
    3) 현재 사용중인 Product와 그 version 및 OS와 그 version을 선택하
    여 검색합니다.
    Certification Matrix는 매우 정확하게 정보를 보여주고 있습니다.
    Matrix에 없는 Oracle Product와 OS version은 certify되어 있지 않으며
    모든 Oracle 제품을 Certify되지 않은 OS version에서 사용하는 것은
    그 어떠한 이유로든 보증과 지원이 되지 않습니다.
    만일 사용중인 제품이 certify되지 않은 경우, 무조건 certify된 제품
    과 OS의 version으로 install하여 다시 시도를 해야 합니다.
    예를 들어, Windows OS의 경우 그 어떠한 Oracle 제품도 Windows Me 및
    Windows XP Home Edition에 certify되어 있지 않습니다.
    Windows 2000 Professional 이상에 Certify된 제품은 Oracle 8.1.6부터
    이며 XP Professional 이상에 Certify된 제품은 Oracle 9.0.1부터
    입니다.
    Oracle 제품은 software이기는 하나 매우 완벽한 수준의 제품이라고 할
    수 있습니다. 그러나 Oracle 제품은 하나의 OS의 process로써 실행이
    되고 시간이 지나며 많은 환경이 major upgrade가 되면서 그러한 환경
    에 따라 Oracle software도 새로운 version으로 제작이 되면서 다시
    certification이 이루어지게 됩니다.
    그렇기 때문에 고객들은 특히 다수의 client나 고가의 server를 계획하
    시는 고객들은 저희 certification matrix를 사전에 철저히 확인하셔야
    합니다.
    앞서 Certification Matrix이전에 Installation Guide에 명시된
    OS version만이 certify되어 있다고 생각하시면 되겠습니다.
    b. Unix에서는 Oracle Software를 install한 후 OS의 Networking patch를
    씌우고 사용하다보면 문제가 되는 경우가 있습니다.
    이런 경우 relink를 해주어 바뀐 OS환경에서 Oracle 실행 file들을 다
    시 만들어 주어야 합니다.
    자세한 내용은 http://metalink.oracle.com에서
    다음 글을 읽어 보시기 바랍니다.
    Note:131321.1 How to Relink Oracle Database Software on UNIX
    c. Certify된 환경에서도 원인을 찾을 수 없는 경우 trace file을 가지고
    Oracle Support Services에 문의를 합니다. (지원 계약 고객에 한함)
    Reference Documents
    Chapter 17 Trouble shooting Oracle Net Services
    Oracle 9i Net Services Administrator's Guide
    SQL*Net, Net8.x, Net Services 9.x Network Administration Guide/Reference

    제품 : SQL*NET
    작성날짜 : 2002-11-24
    TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES
    (GENERATING TRACE FILE OF SQL*NET, NET8.X, AND NET SERVICES)
    ==========================================================
    PURPOSE
    이 글은 고객들이 Oracle Server의 Oracle Networking 제품들을 사용하다가
    Networking과 관련된 문제를 만났으나 스스로 해결할 수 없는 경우, 예를
    들어 http://metalink.oracle.com 에서 같은 case를 발견할 수 없는 경우,
    원인을 찾기 위하여 Networking 제품의 trace를 떠 보는 방법을 설명합니다.
    Explanation
    Oracle Networking 제품을 사용 중에 어떠한 문제를 겪는 경우 무엇보다도
    OS의 Networking Protocol Stack 쪽을 살펴보는 것이 선행되어야 합니다.
    일부 고객분들은 Oracle Networking 제품들이 OS의 Protocol Stack이 동작
    하는데 어떤 중대한 영향을 주는 것이 아닌가 하고 문의를 합니다만
    그러한 의문은 Oracle Networking 제품도 OS의 Protocol Stack을 사용하는
    하나의 network client라는 것을 이해함으로써 해소가 됩니다.
    Oracle Networking 제품도 OS의 Protocol Stack을 이용하는 하나의 network
    client이기 때문에 Oracle Networking 제품이 OS Protocol Stack의 동작에
    어떠한 식으로든 영향을 준다던가 하는 것은 있을 수 없기 때문입니다.
    고객의 관점에서 OS의 Protocol Stack은 정상적으로 설정이 되었다고 믿고
    있으며 기타 networking 환경을 정확히 판단할 수 없는, 예를 들어
    host설정은 잘 되어 있다고 믿고 있으나 firewall을 통해야만 하는 등의
    다소 접근하기 어려운 networking 환경에서 networking이 잘 되지 않는,
    예를 들어, Oracle Server에 연결이 잘 안되거나 연결 중 networking
    error가 발생하는 경우에는 http://metalink.oracle.com에서 같은 case를
    찾는 것이 가장 빠른 해결 방법입니다.
    그러나 드물게 http://metalink.oracle.com에서 같은 case가 나오지 않는
    경우 Oracle Networking 제품의 trace file을 떠서 원인을 찾게 됩니다.
    Oracle Networking 제품은 Oracle 7.x에서 SQL*Net, Oracle 8.x에서 Net 8.x,
    Oracle 9.x에서 Oracle Net Services라는 이름이 가지고 있으나 여기에서는
    편의상 모두 Oracle Networking 제품으로 부르도록 하겠습니다.
    아울러 여기서 언급하는 Trace File은 Oracle Server의 Trace File과
    다른 것입니다. Oracle Server의 Trace File은 database instance의 대한
    내용만을 기록하며 Oracle Networking 제품의 Trace File은 networking에
    대한 내용만을 기록합니다.
    Trace File의 작성 방법은 Oracle 7.x부터 9.x까지 같습니다.
    Solution Description
    1. Client가 되는 host에서 어떠한 문제를 경험한 경우, 간혹 문제의 발생
    빈도가 낮거나 network나 server 쪽에 이상을 느끼시면서도 문제를 확인하기
    여러운 경우가 있습니다. 이런 경우엔는 문제가 다시 발생될 때 까지
    Client에서 Client Trace File를 작성하여 보아야 합니다.
    a. prompt$ echo $TNS_ADMIN
    b. $TNS_ADMIN이 설정되어 있으면, prompt$ cd $TNS_ADMIN
    아니면, prompt$ cd $ORACLE_HOME/network/admin
    c. vi sqlnet.ora
    # 다음 line들을 추가
    TRACE_LEVEL_client=16
    TRACE_FILE_client=<filename>
    TRACE_DIRECTORY_client=<directory>
    TRACE_UNIQUE_client=TRUE
    :wq
    prompt$
    예를 들어, client가 Windows OS인 경우 다음과 같이 합니다.
    prompt> notepad sqlnet.ora
    TRACE_LEVEL_client=16
    TRACE_FILE_client=client
    TRACE_DIRECTORY_client=D:\temp
    TRACE_UNIQUE_client=TRUE
    prompt>
    d. SQL*Plus와 같은, 또는 사용하던 Client software를 계속 이용
    e. 다시 문제가 발생
    f. 작성된 trace file들의 날자를 보아 문제가 발생한 시간과
    거의 같은 시간에 작성된 file들이 있는지 확인
    prompt> dir D:\temp
    client_<PID1>.trc ...
    client_<PID2>.trc ...
    prompt>
    g. trace를 중단합니다.
    prompt$ vi sqlnet.ora
    TRACE_LEVEL_client=0
    :wq
    prompt$
    h. Trace Assistant를 이용하여 Oracle Networking 제품의 error code
    (이하 TNS error code)를 trace file에서 찾아냅니다.
    prompt$ cd <directory of TRACE_DIRECTORY_client>
    prompt$ trcasst <filename of TRACE_FILE_client>_<PID>.trc > trcasst.out
    prompt$ vi -R trcasst.out
    Trace Assistant (trcasst command)는 Oracle 8.x부터 제공되며,
    Oracle 9.x의 Trace Assistant를 사용할 것을 권합니다.
    i. oerr command로 tns error에 대한 error message를 봅니다.
    예를 들어, 흔한 경우 중에 listener가 실행 중이지 않거나 잘못된
    tnsnames.ora 설정으로 client가 listener가 service 중이지 않은
    network address로 연결을 시도하다가 TNS-12541 TNS-12560 TNS-511
    error가 차례대로 나왔다면 다음과 같이 하여 각 TNS error code에
    대한 message와 설명 및 해결방법을 볼 수 있습니다.
    prompt$ oerr tns 12541
    prompt$ oerr tns 12560
    prompt$ oerr tns 511
    j. Trace Assistant가 알려준 TNS error code를 http://metalink.oracle.com
    에서 검색하여 같은 case가 있는지 확인합니다.
    Web browser에서:
    1) Go to http://metalink.oracle.com, then login
    오른쪽 위 HTML frame에서 :
    2) "Advanced" Button을 누릅니다.
    오른쪽 아래 HTML frame에서:
    3) "Enter Keyword" text box에 tns error code를 모두 입력합니다.
    예를 들어, tns-12541 tns-12560 tns-511
    4) "Search" button을 누릅니다.
    k. http://metalink.oracle.com에서 검색이 거의 되지 않거나
    문제가 매우 이상한 경우 이 글 아래를 보시기 바랍니다.
    2. Client에서 SQL*Plus나 Oracle Client를 사용하는 다른 3rd party
    appliction은 잘 동작하나 유독 tnsping command에서 error가 나는 경우가
    드물게 있습니다. 이 때에는 tnsping command의 trace file을 작성해봅니다.
    prompt$ vi sqlnet.ora
    TNSPING_TRACE_LEVEL=16
    TNSPING_TRACE_DIRECTORY=<directory>
    :wq
    prompt$ tnsping <tns alias>
    3. Server, 즉 listener에 문제가 있다고 생각되는 경우 우선 listener의
    log file을 봅니다. listener의 log에 대해서는 bulletin.18364를
    이용합니다.
    4. listener의 trace file은 다음과 같이 설정합니다.
    listener의 trace 설정은 parameter 이름에 trace file을 작성하고자 하는
    listener의 이름이 오는 점, 설정 후 listener process를 restart해야 하는
    점 두 가지를 제외하면 나머지 절차가 앞서 설명드린 client와 같습니다.
    prompt$ vi listener.ora
    TRACE_LEVEL_<listener name>=16
    TRACE_FILE_<listener name>=<filename>
    TRACE_DIRECTORY_<listener name>=<directory>
    :wq
    prompt$ lsnrctl stop <listener name>
    prompt$ lsnrctl start <listener name>
    5. 만일 위와 같이 http://metalink.oracle.com을 검색하여도
    같은 case가 전혀 없거나 찾아낸 error message들이 원인과 관련이 없어
    보일정도로 매우 이상한 경우 다음과 같이 해봅니다.
    a. Oracle Software의 version과 OS의 version이 certification matrix에
    있는 지 확인합니다.
    Web browser에서:
    1) Go to http://metalink.oracle.com, then login
    왼쪽 menu에서 :
    2) "Certify & Availabilty" menu item을 click합니다.
    오른쪽 아래 HTML frame에서:
    3) 현재 사용중인 Product와 그 version 및 OS와 그 version을 선택하
    여 검색합니다.
    Certification Matrix는 매우 정확하게 정보를 보여주고 있습니다.
    Matrix에 없는 Oracle Product와 OS version은 certify되어 있지 않으며
    모든 Oracle 제품을 Certify되지 않은 OS version에서 사용하는 것은
    그 어떠한 이유로든 보증과 지원이 되지 않습니다.
    만일 사용중인 제품이 certify되지 않은 경우, 무조건 certify된 제품
    과 OS의 version으로 install하여 다시 시도를 해야 합니다.
    예를 들어, Windows OS의 경우 그 어떠한 Oracle 제품도 Windows Me 및
    Windows XP Home Edition에 certify되어 있지 않습니다.
    Windows 2000 Professional 이상에 Certify된 제품은 Oracle 8.1.6부터
    이며 XP Professional 이상에 Certify된 제품은 Oracle 9.0.1부터
    입니다.
    Oracle 제품은 software이기는 하나 매우 완벽한 수준의 제품이라고 할
    수 있습니다. 그러나 Oracle 제품은 하나의 OS의 process로써 실행이
    되고 시간이 지나며 많은 환경이 major upgrade가 되면서 그러한 환경
    에 따라 Oracle software도 새로운 version으로 제작이 되면서 다시
    certification이 이루어지게 됩니다.
    그렇기 때문에 고객들은 특히 다수의 client나 고가의 server를 계획하
    시는 고객들은 저희 certification matrix를 사전에 철저히 확인하셔야
    합니다.
    앞서 Certification Matrix이전에 Installation Guide에 명시된
    OS version만이 certify되어 있다고 생각하시면 되겠습니다.
    b. Unix에서는 Oracle Software를 install한 후 OS의 Networking patch를
    씌우고 사용하다보면 문제가 되는 경우가 있습니다.
    이런 경우 relink를 해주어 바뀐 OS환경에서 Oracle 실행 file들을 다
    시 만들어 주어야 합니다.
    자세한 내용은 http://metalink.oracle.com에서
    다음 글을 읽어 보시기 바랍니다.
    Note:131321.1 How to Relink Oracle Database Software on UNIX
    c. Certify된 환경에서도 원인을 찾을 수 없는 경우 trace file을 가지고
    Oracle Support Services에 문의를 합니다. (지원 계약 고객에 한함)
    Reference Documents
    Chapter 17 Trouble shooting Oracle Net Services
    Oracle 9i Net Services Administrator's Guide
    SQL*Net, Net8.x, Net Services 9.x Network Administration Guide/Reference

  • I am having trouble Installing Acrobat XI Pro...

    I am having trouble Installing Acrobat XI Pro... I'm receiving an error that says I need Adobe Application Manager to verify my license.  Each time I try to install Adobe Application Manager 8.0, I receive an error that says the installer failed to initialize.  I am then directied to download Adobe Support Advisor, which, according to your website, doesn't exist any more.  I am now stuck.  Please help.

    Sorry... should have put the particulars of the box down:
    Win 7 Ultimate x64, SP1 on a Mac Pro.

  • Trouble shooting problem/ via tech. issue

    on grow computer triied to install flash for video watch.not connecting to computer. read instructions of installation. not responsing to host. customer tech. can reboot from station, quick installation return to auto play. email if can help trouble  shooting issue. [email protected]

    To help troubleshoot we'll need the following system information:
    Operating   system  
    Browser  
    Flash   Player version
    When reporting issues with video or audio, it's also helpful to get your system hardware and driver details.  Instructions for finding this information can be found here:
    Windows  
    Mac
    Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player.  I recommend trying both of the links below to see how they perform.  If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing.  You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
    HTML5   video  
    Non-HTML5 video

  • Ownload the 30 day Captivate 8 trial. The download obviously didn't work and it's now stuck going nowhere in my system, calling itself "Resume Download etc". I've looked at all the trouble shooting pages to no avail. Anyone know how I can find a real pers

    I've just opened an Adobe ID and tried to download the 30 day Captivate 8 trial. The download obviously didn't work and it's now stuck going nowhere in my system, calling itself "Resume Download etc". I've looked at all the trouble shooting pages to no avail. Anyone know how I can find a real person to talk to about this?

    Try downloading the offline installer from http://prodesigntools.com/adobe-captivate-8-direct-download-links.html
    Make sure you follow the Very Important Instructions on that page.
    You can Contact Customer Care - click on the Still need help? button to talk or chat with an agent.

  • Photoshop elements 11 install stops at sharing progs . Have tried all the trouble shoot info. All useless. Help Please

    Photoshop elements 11 install stops at sharing progs . Have tried all the trouble shoot info. All useless. Help Please
    Windows 8.1 OS

    Does everything include this:
    Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

  • Have done all the trouble shooting connection but my iPad still can not get wifi connection

    i have done all the trouble shooting connection but mu iPAd still can not get wifi connection

    Hi Jo,
    Each router is a little different but here are the basics: login to the router using the administrator account, should have that info from the installer, and then you should find something like security settings, or it may be advanced security.  There will be a setting to the effect of limiting access, or it may say allow Mac address authentication, or admit the Mac addresses in the table...if that is switched on, you can just switch it off and that will allow any wireless device to attach.  If you want to keep it on, then you have to enter the Mac address for the device you want to use for access.  In the case of the iPad, go to Settings > General > About > WiFi Address (another way of saying Mac address).  Enter that very long sequence in the router's Mac address acceptance table and that should take care of things.
    Using the Mac address does not change any of the email settings, just limits attaching to the router in the first place.
    If you are already getting email, you must be attaching already so this should not be an issue.  If you are having email issues, such as receive but not send, you may not have the outgoing server set correctly: Settings > Mail > Account > Outgoing server name (usually an SMTP server) and you may have to go to the advanced settings to enter the outgoing password (normally the same as the account/incoming password) and then check to see if SSL is ON or OFF...most common email services say to set to OFF.

  • Acrobat installation issues

    Trouble downloading Acrobat Standard. Keep getting the message, "Serial Number you provided is valid, but a qualifying product could not be found of this computer."
    Please advise!

    Hello richgthom,
    The reason you get this error message is because you seems to have purchased a upgraded Acrobat version. Since the new installer isn't able to find the version from which you have upgraded you get this error.
    What's the version of Acrobat Std, you are trying to install?
    ~Deepak

  • Trouble opening acrobate files with reader 10.1.7.

    I have trouble opening acrobate files with reader 10.1.7. When I click  on the file to open it with adobe reader x, nothing happens. If I click  on Adobe Reader X icon, a message comes up: preparing to install. After  that, I can open a PDF, but only until the next reboot.

    Something went amiss during the install. Windows keeps trying to finish the incomplete install every time Reader opens.
    Use the Adobe Cleaner to completely remove Reader.
    Download the offline installer and reinstall without a download manager

  • Making bootable trouble shooting CD

    Making bootable trouble shooting CD
    I am trying to create a bootable Solaris 7-8 CD that will have the basic file system. What I am would like to have on the disk is the following:
    Fsck
    Snoop
    Mount
    Ifconfig
    /usr/bin
    /etc/
    and some others.
    Does any one have suggestions on how to do this?
    Currently I use makecd.i386 command. I am not sure where this came form. I found it on one of my servers and it was set up to make a 2.5 bootable CD. I would like to know how to upgrade to 7+. Also if anyone knows of any information on this command. I would be willing to use a Linux boot disk if I could find a driver that supports ufs file system.

    I am having the same issue. My disk drive will not accept any CDs, music or blank. It doesn't recognize them and ejects them. I have a Power Mac G4 with a combo DVD-RW/CD-RW drive. I have never had problems with this before. Could it be from updating versions to 10.3.9? I'm weary of restoring my computer because if that doesn't solve the problem, I won't be able to reinstall all my extra software (like Adobe photoshop, etc) b/c the disk drive doesn't work and you use it for the installation CDs. Any help would also be appreciated!!!
    Power Mac G4 Mac OS X (10.3.9)

  • I had a 1 TB Drive that was connected as a back up, but it is no longer recognized by the mac.  How may I trouble shoot to reconnect?

    how do I trouble shoot this?

    emanwine wrote:
    Got it to connect and it is my back up. ...
    Good News.
    If this is your only Backup would suggest getting a New EHD and creating another one... Preferably a Clone if you don't already have one.
    http://www.bombich.com/
    Can never have too many Backups...

Maybe you are looking for