Trouble shooting help needed for Elements 9
When I go to "FIX' in Elements 9, I get a Runtime Error message followed by this screen: Adobe Photoshop Elements 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avaiblable." I have not received a notification from Windows. This issue started yesterday--no previous issues with the program until then.
Thanks again for the help. Here are the IRQ Settings:
IRQ 00 Exclusive System timer
IRQ 01 Exclusive Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03 Exclusive Communications Port (COM2)
IRQ 04 Exclusive Communications Port (COM1)
IRQ 06 Exclusive Standard floppy disk controller
IRQ 08 Exclusive System CMOS/real time clock
IRQ 09 Shared Microsoft ACPI-Compliant System
IRQ 0A Exclusive MPU-401 Compatible MIDI Device
IRQ 0C Exclusive PS/2 Compatible Mouse
IRQ 0D Exclusive Numeric data processor
IRQ 13 Shared 3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13 Shared NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14 Shared NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14 Shared Standard OpenHCD USB Host Controller
IRQ 15 Shared NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15 Shared Standard Enhanced PCI to USB Host Controller
IRQ 15 Shared NVIDIA® nForce(TM) IDE Controller
IRQ 16 Shared NVIDIA nForce MCP Networking Adapter
IRQ 16 Shared Standard OpenHCD USB Host Controller
Similar Messages
-
Trouble Shooting Help needed on GF4 MX 440
I have a MSI - GF4 MX440 8x AGP which I am having troubles with.
When I try to play any 3D games they will start and run for a few seconds then crash back to the desktop. (specificaly Morrowind and Mafia I have not yet tried others) Any trouble shooting advice would be much appreciated. I have tried to re-install windows and put only the mobo, vid card drivers and the games on the system, but with the same results. Also the MSI Specs Page for the MX440 says that it "Supports Microsoft® DirectX® 8.0, 7.0, 6.0, and 5.0 (IDCT)" ... does that mean DX 9 is not supported?
System Specs:
Windows XP Pro
Epox 8RDA+ mobo (onboard sound and lan) www.epox.com
AMD Athlon XP 2600 333fsb
1 gig PC 2700 RAM
60 gig 7200 RPM Maxtor HD
Lite-on 40x12x48 CD-RW
3COM 10/100 Nic
Enermax EG365P-VE Power Supply http://www.enermax.com.tw/eg365p-ve-fma.htmThanks again for the help. Here are the IRQ Settings:
IRQ 00 Exclusive System timer
IRQ 01 Exclusive Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03 Exclusive Communications Port (COM2)
IRQ 04 Exclusive Communications Port (COM1)
IRQ 06 Exclusive Standard floppy disk controller
IRQ 08 Exclusive System CMOS/real time clock
IRQ 09 Shared Microsoft ACPI-Compliant System
IRQ 0A Exclusive MPU-401 Compatible MIDI Device
IRQ 0C Exclusive PS/2 Compatible Mouse
IRQ 0D Exclusive Numeric data processor
IRQ 13 Shared 3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13 Shared NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14 Shared NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14 Shared Standard OpenHCD USB Host Controller
IRQ 15 Shared NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15 Shared Standard Enhanced PCI to USB Host Controller
IRQ 15 Shared NVIDIA® nForce(TM) IDE Controller
IRQ 16 Shared NVIDIA nForce MCP Networking Adapter
IRQ 16 Shared Standard OpenHCD USB Host Controller -
IOS 5 and DPS issue? Trouble shooting help needed.
I have a reader with a problem. I can't seem to tell him what the problem is and how to fix it. He is the only one that I know of with the problem. Turns out the story the problem happens on is also the story he wrote for the latest issue.
He has an orginal iPad 1, running iOS 5 (I do all my proofing etc off a iPad 2)
My DPS App was updated to v24 to address the crashing issue once iOS 6 came to be. Prior to this current issue being made available.
The first two issue I produced were v23. Latest folio and the one with the problem is a v24
He says he has updated the app itself to the v24 version
This is what he reports keeps happening.....
No matter what I do as soon as I open the current issue and go to my column, on the 3rd page where it says "Make Your Personal Weather Apps" when I press where it says "PRESS FOR INTERACTIVE DEMO," the trouble starts. The demo proceeds for 3-4 pages and then crashes, completely wiping out the entire file. Then I have to go back to the home screen and completely download the entire issue again. I've tried this at least six times, and get the same frustrating results every time !!
Are there known issues with orginal iPad 1's and DPS?
Did he think he downloaded the most recent version of the app?
Is there a real problem? That I can fix?
Wait to see if any one else complains?
Thanks in advance.Thanks again for the help. Here are the IRQ Settings:
IRQ 00 Exclusive System timer
IRQ 01 Exclusive Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03 Exclusive Communications Port (COM2)
IRQ 04 Exclusive Communications Port (COM1)
IRQ 06 Exclusive Standard floppy disk controller
IRQ 08 Exclusive System CMOS/real time clock
IRQ 09 Shared Microsoft ACPI-Compliant System
IRQ 0A Exclusive MPU-401 Compatible MIDI Device
IRQ 0C Exclusive PS/2 Compatible Mouse
IRQ 0D Exclusive Numeric data processor
IRQ 13 Shared 3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13 Shared NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14 Shared NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14 Shared Standard OpenHCD USB Host Controller
IRQ 15 Shared NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15 Shared Standard Enhanced PCI to USB Host Controller
IRQ 15 Shared NVIDIA® nForce(TM) IDE Controller
IRQ 16 Shared NVIDIA nForce MCP Networking Adapter
IRQ 16 Shared Standard OpenHCD USB Host Controller -
"Shockwave Flash has crashed". Trouble shoot help needed
whenever I go to a website to play a game or watch a video, i keep getting this message accompanied by an angry puzzle piece character. I have tried numerous troubleshoots on google and found nothing that worked for me.... I have also 'powerwashed' my chromebook and restarted it with no luck.... However when i go to the Adobe page to test the shockwave player, it works perfectly fine. I am getting entirely too far behind in my school work and I need this fixed ASAP, any help is appreciated. Thank you in advance.
I have a brand new Samsung Chromebook, so I am not exactly sure... possibly Chrome or linux
-
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Help needed with Elements 5.0
Trying to Edit photos. Click on Edit icon and I get the Message " Attempt to Access invalid address". Click OK get message "Unable to connect to editor application.
What is the problem? I have unenstalled to program and reinstalled, I have tried repairing from CD. Nothing works. Please help.I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
> -
Help need for force to signout All session ! how...
hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Query help needed for querybuilder to use with lcm cli
Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
MissyJust wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy -
Help needed for using BASIC authentication through JDBCRealm
Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
<Realm
className="org.apache.catalina.realm.JDBCRealm"
driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
connectionName="username" connectionPassword="password"
digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
userRoleTable="user_roles" roleNameCol="rolename"
/>
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
---------------------------------------------------------------- -
Help Needed for T42 Start-up Problem
Urgent help need!!!
I have a ThinkPad T42 with Windows XP installed. It works perfectly for a while without ever have any problem or error message. Then suddenly it won’t work anymore. The symptom is following:
After power on the laptop the Microsoft window would show up and it prompt me for window logon password. After I type in the password it then shows “window is loading your personal setting”. After a long while nothing would show up on the screen other than the background of the normal screen. There is no window bar at the bottom or any icon on the screen. If I start in safe mode then everything would show up. I don’t know what is going on.
This happened two months ago and I ended up restoring a backup image to get it work again. It happens again today with the same symptom. I am really tired of having to restore image backup every 2 months.
I would really appreciate it if any of your experts can offer me some insight into this problem. I am desperate in need of help.
Thanks very much!wangy26, welcome to the forum,
Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Trouble installing RAW plugin for Elements 10
Getting "Installation failed" when I try to install the 6.6 RAW format plugin for Elements 10. This occurs only on my 32-bit Windows 7 system; when I install on my 64-bit Windows 7 system everything works fine.
Help?Sure. It's called Elements 11.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium -
Help need for badi method me_process_po_cust~check
Dear All expert
Pl see following thread
I am stuck
Help needed
http://scn.sap.com/thread/3610303See the issue here is HOLD feature in PO should not be there if it meets the error condition.
For this you can refer another BADI for this purpose ME_HOLD_PO.
Refer one of my previous threads below , it might be helpful :
Held Purchase order need not be created.
Reiterating a thread related to same topic is not a good practice. -
We have a 4th gen iPod and it connects to FaceTime on an iPad Air and iPhone 5 in our home perfectly, however upon trying to connect to others via FaceTime outside of our home it comes up with 'connecting' followed by 'lost connection'. I have been through several of the trouble shooting guides however it is still not working. Can anyone please offer some advice/help? Thanks in advance
Can others successfully originate FT calls from outside your house?
Did you try this:
iOS: Troubleshooting FaceTime
The following may be your problem
Using FaceTime and iMessage behind a firewall
Maybe you are looking for
-
Printing problems - Network host is busy, will retry in 30 seconds . . .
Configuration: 3 machines on the network 1. iMac with Snow Leopard 10.6.8 (wired connection) 2. Ubuntu Linux 11.04 (Natty Narwhal) server on IA64 with CUPS 1.4.6 (machine is called tusko) 3. MacBookPro with Snow Leopard 10.6.7 (wireless connection) 4
-
IPhoto fail to import some pictures
Hi, Just came back from a long vacation with around 600 pictures (I have a Nikon D70). After importing all of them directly in to the iPhoto application, it gives me the following error message, for 126 specified photos: "unreadable files - the follo
-
I would like to buy a new I Pad for my wife but she will need lessons on using this..are these available at the store?
-
Authorisation in VB01, VB11 and VBN1
Hi, I need to control creation of listing/exlcusion records on division basis. I searched for userexit in SAPMV13G, SAPMV13D and SAPMV13N but could not get any. I also searched for any BTE but could not find any. Can anyone help me on this??? vibhas
-
Hi guys, I'm currently developing a high-level solution architecture for a custom SoD engine integrated to OIM through Oracle SoD Invocation Library (SIL). Reading through the SIL documentation I can see that the proposed way of loading & updating th