Trouble-shooting help - New Mobo

I have a brand new MS-6378 (v3) MSI motherboard + AMD Athlon 1.1GHz CPU, 350 PSU (P4 enabled), 1 x 128 MB SDRAM DIMM.
All setup according to installation guide.
Processor is AMD A1100AMS3B which indicates a 200MHz Clock, 256K L2 Cache, 1.1GHz....all within spec for the Mobo
Motherboard set to 100MHz FSB
PROBLEM:
When booting I get no Video signal (yes, it's connected correctly) and after 30-40 seconds the Mobo shuts down.
I've checked and rechecked setup and changed the FSB to 133 with no difference.
Any help would be greatly appreciated. )
Thanks,
Mike

(I not allowed to edit my mesgs...strange).
[size=15]Update[/SIZE]
Make sure the motherboard was installed properly to the chassis (the board should not touch the chassis)
DONE
Make sure all the components (memory, CPU, AGP & power supply connectors etc.) are properly installed
DONE
Clear CMOS
DONE
Change to another power supply
DONE
Change to another memory
Checked memory on another computer. It works great.
Change to another AGP card
N/A - onboard video driver

Similar Messages

Trouble Shooting Help needed on GF4 MX 440

I have a MSI - GF4 MX440 8x AGP which I am having troubles with.
When I try to play any 3D games they will start and run for a few seconds then crash back to the desktop. (specificaly Morrowind and Mafia I have not yet tried others) Any trouble shooting advice would be much appreciated. I have tried to re-install windows and put only the mobo, vid card drivers and the games on the system, but with the same results. Also the MSI Specs Page for the MX440 says that it "Supports Microsoft® DirectX® 8.0, 7.0, 6.0, and 5.0 (IDCT)" ... does that mean DX 9 is not supported?
System Specs:
Windows XP Pro
Epox 8RDA+ mobo (onboard sound and lan) www.epox.com
AMD Athlon XP 2600 333fsb
1 gig PC 2700 RAM
60 gig 7200 RPM Maxtor HD
Lite-on 40x12x48 CD-RW
3COM 10/100 Nic
Enermax EG365P-VE Power Supply http://www.enermax.com.tw/eg365p-ve-fma.htm

Thanks again for the help. Here are the IRQ Settings:
IRQ 00   Exclusive   System timer
IRQ 01   Exclusive   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03   Exclusive   Communications Port (COM2)
IRQ 04   Exclusive   Communications Port (COM1)
IRQ 06   Exclusive   Standard floppy disk controller
IRQ 08   Exclusive   System CMOS/real time clock
IRQ 09   Shared   Microsoft ACPI-Compliant System
IRQ 0A   Exclusive   MPU-401 Compatible MIDI Device
IRQ 0C   Exclusive   PS/2 Compatible Mouse
IRQ 0D   Exclusive   Numeric data processor
IRQ 13   Shared   3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13   Shared   NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14   Shared   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14   Shared   Standard OpenHCD USB Host Controller
IRQ 15   Shared   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15   Shared   Standard Enhanced PCI to USB Host Controller
IRQ 15   Shared   NVIDIA® nForce(TM) IDE Controller
IRQ 16   Shared   NVIDIA nForce MCP Networking Adapter
IRQ 16   Shared   Standard OpenHCD USB Host Controller

Please Help New Mobo CPU Temp 255 Deg Celcius

Hi, I just bought Big Bang Marshall with all the new computer part yesterday, after i finish installing everything then i started the computer, went to BIOS was planning to choose my boot driver, then i went to check the cpu temp. the cpu is 255 degress at 4.6mhz speed which i have not configure anything yet not even overclock yet. but then i put my hand and feel the temp in the cpu cooler it was warm not hot at all. but i worried that the 255 deg is real and might blow everythign so i turn off. thats the only time i turn it on, then today i phone the shop and the shop didnt know anything they never experience 255 deg. so i need to wait till monday until msi customer service open. but i got whole day today, i am wondering if people can help so i might able to fix the issue. should i continue and install the windows or should i wait till msi open again? thank alot
my part is:
mobo: Big Bang Marshall (B3 rev)
procesor: i7 2600k
cpu cooler: H70 Corsair
CPu thermal paste: Gelid
Video card: MSI GTX580 Lightning x2 Sli
PSU: Corsair AX1200
Ram: Gskill Ripjaws X 2133mhz 4x4gb
os: windows 7 ultimate

Quote from: HU16E on 05-June-11, 14:38:12
As long as the RAM defaults properly to 1333 like it is supposed to, all should be fine with having 2133's installed. RAM speed is kind of a sore subject with the Sandy Bridge platform. Not much is gained by 2133 in performance, but if you wish to persue more speed, please open a thread in the OC, Undervolt, & Mod Section of the forum.
thankss alott
Quote from: Bernhard on 05-June-11, 14:37:35
If you are not into extreme overclocking, then indeed a JEDEC standard 1333 set is all thats needed. If yours defaults to 1333 though and is stable, then you should be fine.
thankss alott

Looking for trouble shooting help -Connections being dropped from app.

I need a little help in hunting down the source of a problem. We have Oracle 10gR2 (10.2.0.1) running on Solaris 10. The web application is based on WEBLOGIC on another server also running Solaris 10 with a new firewall in between. When started, the application will get 176 connections to the database. Over time, still working on how long, the connections get dropped. The profile they app is connecting to is for unlimited connections and connection time. I do not have an setting to disconnect after idle for x minutes. Even the listener spawned processes die. Other applications from other machines also have problems if idle for a period of time, SQLDeveloper, SQLPlus, TOAD, SQLNAVIGATOR.
We are trying to hunt down the source of the problem but are at a loss. I have checked and verified that the oracle instance does not have a parameter set to kill idle connections for the users the apps are connecting as. The sys admin says there are no unix parameters he knows about on either solaris box that is killing connections and that the firewall settings should not be killing them.
A duplicate environment running all the same versions of software work fine, the only differences between the two is the box and operating system, Sun V120 w/Solaris 8 vs. Sun V40Z w/Solaris 10.
This system goes live in two weeks so we are trying to get this figured out soon. Any hints on where to look or has any one else had similar problems?
thanks

listener.ora on Oracle server machine:
# listener.ora Network Configuration File: /u01/app/oracle/product/10.2/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ng-db01)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
Weblogic machine is not useing a client so has no sqlnet.ora file on it. Others having problem:
# sqlnet.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

IOS 5 and DPS issue? Trouble shooting help needed.

I have a reader with a problem. I can't seem to tell him what the problem is and how to fix it. He is the only one that I know of with the problem. Turns out the story the problem happens on is also the story he wrote for the latest issue.
He has an orginal iPad 1, running iOS 5 (I do all my proofing etc off a iPad 2)
My DPS App was updated to v24 to address the crashing issue once iOS 6 came to be. Prior to this current issue being made available.
The first two issue I produced were v23. Latest folio and the one with the problem is a v24
He says he has updated the app itself to the v24 version
This is what he reports keeps happening.....
No matter what I do as soon as I open the current issue and go to my column, on the 3rd page where it says "Make Your Personal Weather Apps" when I press where it says "PRESS FOR INTERACTIVE DEMO," the trouble starts. The demo proceeds for 3-4 pages and then crashes, completely wiping out the entire file. Then I have to go back to the home screen and completely download the entire issue again. I've tried this at least six times, and get the same frustrating results every time !!
Are there known issues with orginal iPad 1's and DPS?
Did he think he downloaded the most recent version of the app?
Is there a real problem? That I can fix?
Wait to see if any one else complains?
Thanks in advance.

Thanks again for the help. Here are the IRQ Settings:
IRQ 00   Exclusive   System timer
IRQ 01   Exclusive   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03   Exclusive   Communications Port (COM2)
IRQ 04   Exclusive   Communications Port (COM1)
IRQ 06   Exclusive   Standard floppy disk controller
IRQ 08   Exclusive   System CMOS/real time clock
IRQ 09   Shared   Microsoft ACPI-Compliant System
IRQ 0A   Exclusive   MPU-401 Compatible MIDI Device
IRQ 0C   Exclusive   PS/2 Compatible Mouse
IRQ 0D   Exclusive   Numeric data processor
IRQ 13   Shared   3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13   Shared   NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14   Shared   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14   Shared   Standard OpenHCD USB Host Controller
IRQ 15   Shared   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15   Shared   Standard Enhanced PCI to USB Host Controller
IRQ 15   Shared   NVIDIA® nForce(TM) IDE Controller
IRQ 16   Shared   NVIDIA nForce MCP Networking Adapter
IRQ 16   Shared   Standard OpenHCD USB Host Controller

"Shockwave Flash has crashed". Trouble shoot help needed

whenever I go to a website to play a game or watch a video, i keep getting this message accompanied by an angry puzzle piece character. I have tried numerous troubleshoots on google and found nothing that worked for me.... I have also 'powerwashed' my chromebook and restarted it with no luck.... However when i go to the Adobe page to test the shockwave player, it works perfectly fine. I am getting entirely too far behind in my school work and I need this fixed ASAP, any help is appreciated. Thank you in advance.

I have a brand new Samsung Chromebook, so I am not exactly sure... possibly Chrome or linux

Trouble shooting help PLEASE

HELP. My blackberry z10 says its data storage is almost full (15.7 out of 16 GB) . Because of this apps have shut down and won't let me open them (BLACKBERRY HUB, PHOTOS, FILE MANAGER, APPs etc) but even WORSE it won't even let me take the files from my phone to the computer. I've plugged it in and the computer does not recognize the connection. Blackberry blend says "Cannot connect". How am I supposed to get the files off my device to clear it up if it doesn't let me??Is there some kind of setting that it is on that I don't know?? HELP. thanks

Link is what you want to use, not Blend. For the moment, see if Link will connect. If so, solve the immediate storage problem and come back and troubleshoot Blend.
An alternative, again for the moment, is to move your files to the cloud. For example Box or One Drive, though there are others.

Trouble shooting help needed for Elements 9

When I go to "FIX' in Elements 9, I get a Runtime Error message followed by this screen: Adobe Photoshop Elements 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avaiblable." I have not received a notification from Windows. This issue started yesterday--no previous issues with the program until then.

Thanks again for the help. Here are the IRQ Settings:
IRQ 00   Exclusive   System timer
IRQ 01   Exclusive   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03   Exclusive   Communications Port (COM2)
IRQ 04   Exclusive   Communications Port (COM1)
IRQ 06   Exclusive   Standard floppy disk controller
IRQ 08   Exclusive   System CMOS/real time clock
IRQ 09   Shared   Microsoft ACPI-Compliant System
IRQ 0A   Exclusive   MPU-401 Compatible MIDI Device
IRQ 0C   Exclusive   PS/2 Compatible Mouse
IRQ 0D   Exclusive   Numeric data processor
IRQ 13   Shared   3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13   Shared   NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14   Shared   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14   Shared   Standard OpenHCD USB Host Controller
IRQ 15   Shared   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15   Shared   Standard Enhanced PCI to USB Host Controller
IRQ 15   Shared   NVIDIA® nForce(TM) IDE Controller
IRQ 16   Shared   NVIDIA nForce MCP Networking Adapter
IRQ 16   Shared   Standard OpenHCD USB Host Controller

Trouble Shooting help with broken system

See sig for system.
Today I was just sitting there enjoying myself and decided to run diskeeper on my D:
PATA drive when pop went the weasel. The computer won't boot to windows.
All the info the BIOS gives me looks good ie the sata and pata controllers are functioning as is the lone IDE drive.
I looked at the board and one of the sata ports is pulled slightly away from the board
yet the drive is recognized on it as it is on the other.
I have another PS that I will try tonight or tomorrow but was looking for some troubleshooting expertise.
Other info: Hangs for a spell when loading atapi.sys
Won't boot my other OS 64 bit XP which was hidden when the error happened
Any Advice? No way to test the SATA drive
Thanks
Ahumado

Quote from: Hans on 11-August-06, 02:17:32
As long as you don't re-initialize the PATA-RAID, nothing will go wrong. Simply keep an eye on any messages that warn you about data-loss.
I read the manual and it states I may lose data but probably not. Ok if I delete the array where does the data go? Drive 1 or Drive 2 or ? and can I access it by merely hooking the drive(s) to IDE? I have a ton of data and I can move it and back it up but if I don't have to I don't want to.
Or is that the only way to go. Once arrayed always arrayed? As you can see I'm confused and need some spoon fed hand holding or the like.
Thanks
Ahumado

Trouble shooting the export function

I am a new user to CS4 Premiere 4.1.0 as part of my master suite program bought 2 weeks ago. I can't find any trouble shooting help or explanation of error messages in the program's help section; I have tried most of the trouble shooting steps (other than reinstalling the entire suite) from the knowledge base on the Adobe site without any success; and finally would like someone on this forum to rescue my newly installed Premiere from disaster. Here is my problem:
---- when exporting utilizing the media encoder; after exporting and clicking on the encoder to start , the program would come back with the following error message " PProheadless has encountered an error. [..\..\Src\Remote Import Module. Cpp-250]". I can't find any reference to this error code and how to fix it on the Adobe website. I have tried to fix it for days now without any results. Without being able to fix this my programs are useless to me.
Not finding any reference on the Adobe manual to the error code or how to trouble shoot the program is really demoralizing and disappointing to me. You can see PProHeadless as a program on the computer's hard drive but you won't find any reference to this program throughout the Adobe website.
For reference my hardware specs. are: i7 920 CPU, 6 G DDR3, Asus P6T professional work station main board, 160 G SSD SATA C-Drive, 1 tera byte SATA D and E drives, the GPU is nvidia GTX 285 with 1 GB ram, 1000 Watt power supply in a mini tower, plus Sony Blue ray, OS is Vista 64 premium. The computer is dedicated to editing video. All programs are loaded on C; the D drive is used as working space and virtual ram. E drive is for storage. The only other program running is Avast anti-virus program. The file exporting problem stays even when Avast is uninstalled. All the devise drivers are Vista 64 compatible. The computer is brand new; dedicated to Premiere - not even Microsoft word is loaded.
In addition to the above exporting problem, every time I switch between loaded programs such as between Premiere and Firefox, the cursor would stay in the "wait" mode, i.e. in a spinning circle, for about a minute before turning into an arrow in Premiere. It almost feels like Premiere has to reload the ram all over again; this is really annoying and time wasting.
If I have known of these issues, I would have bought a Mac Pro with Mac software in the first place.
I would really appreciate some help from friends and experts on this forum. Thank you.

Do you have a dynamic or fixed dimension table?
Looks like you have a fixed dimension table here...
Using -> [*] is to specify each instances of that object inside the subform specified... Here if you have more than one PSI into Row5 it would work... But as I understand you have to write only Avg(Row3.PSI, Row4.PSI, Row4.PSI)
If you have a dynamic table and your row is only named Row1... each instances of the row would be Row1[0], Row1[1], Row1[2]
So in your Average function you would only write :
Avg(Row1[*].PSI) and it would return the average of each rows

Rebate Process Trouble Shooting

Rebate Process Trouble Shooting.
New Cancellation Procedure for Excise Invoice in India.
New Cancellation procedure deactivation in India.
Free Goods Quantity Proble.
New Pricing Rule based on the business scenarios
Any info on SAP Notes relevant to these
Regards,
M

Dear Manisha,
Rebate Process Trouble Shooting.
Refer OSS note 75778
New Cancellation Procedure for Excise Invoice in India.
Refer OSS note 551932
New Cancellation procedure deactivation in India.
Refer OSS note 339928
Free Goods Quantity Proble.
Refer OSS note 629679
New Pricing Rule based on the business scenarios
Refer OSS note 24832
Regards,
Rakesh

About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help!

About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help!
I've had my new one for less than 3 weeks. What gives? I'm loosing faith in apple

no body?

My new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips

my new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips

This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

HT1386 After the recent iTunes my PC recognizes that I have connected my iPhone, but iTunes does not. I tried the trouble shooter; it said device not recognized. I clicked the help button as instructed and get iPod not recognized instructions. What for iP

I have not been able to sync my iPhone 5s on my PC sincethe most recent update to iTunes. My computer showsthe iPhone as connected, but iTunes does not recognize it. I tried the trouble shooter and got device not recognized. I clicked the help button beside the failed test and get iPod instructions. How do I get iPod instructions for work for an iPhone? Better, how can I get this to show iPhone instructions? (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)

You wrote: (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)
You may have to do this on this computer as well. http://support.apple.com/kb/ts5376

No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

this is what you need to do to exclude everything apart from desktop.
on time machine preferences, click on Options
click plus sign, on the new window, click macintosh HD
do a Control + A then deselect users then click okay
go to options again, plus sign, go to users, control +A then deselect your user account
go to options again, plus sign, go to your user account, control + A, deselect desktop
start the back up.

Trouble-shooting help - New Mobo

Similar Messages

Maybe you are looking for