Trouble shooting help PLEASE

HELP. My blackberry z10 says its data storage is almost full (15.7 out of 16 GB) . Because of this apps have shut down and won't let me open them (BLACKBERRY HUB, PHOTOS, FILE MANAGER, APPs etc) but even WORSE it won't even let me take the files from my phone to the computer. I've plugged it in and the computer does not recognize the connection. Blackberry blend says "Cannot connect". How am I supposed to get the files off my device to clear it up if it doesn't let me??Is there some kind of setting that it is on that I don't know?? HELP. thanks

Link is what you want to use, not Blend. For the moment, see if Link will connect. If so, solve the immediate storage problem and come back and troubleshoot Blend.
An alternative, again for the moment, is to move your files to the cloud. For example Box or One Drive, though there are others.

Similar Messages

Trouble Shooting Help needed on GF4 MX 440

I have a MSI - GF4 MX440 8x AGP which I am having troubles with.
When I try to play any 3D games they will start and run for a few seconds then crash back to the desktop. (specificaly Morrowind and Mafia I have not yet tried others) Any trouble shooting advice would be much appreciated. I have tried to re-install windows and put only the mobo, vid card drivers and the games on the system, but with the same results. Also the MSI Specs Page for the MX440 says that it "Supports Microsoft® DirectX® 8.0, 7.0, 6.0, and 5.0 (IDCT)" ... does that mean DX 9 is not supported?
System Specs:
Windows XP Pro
Epox 8RDA+ mobo (onboard sound and lan) www.epox.com
AMD Athlon XP 2600 333fsb
1 gig PC 2700 RAM
60 gig 7200 RPM Maxtor HD
Lite-on 40x12x48 CD-RW
3COM 10/100 Nic
Enermax EG365P-VE Power Supply http://www.enermax.com.tw/eg365p-ve-fma.htm

Thanks again for the help. Here are the IRQ Settings:
IRQ 00   Exclusive   System timer
IRQ 01   Exclusive   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03   Exclusive   Communications Port (COM2)
IRQ 04   Exclusive   Communications Port (COM1)
IRQ 06   Exclusive   Standard floppy disk controller
IRQ 08   Exclusive   System CMOS/real time clock
IRQ 09   Shared   Microsoft ACPI-Compliant System
IRQ 0A   Exclusive   MPU-401 Compatible MIDI Device
IRQ 0C   Exclusive   PS/2 Compatible Mouse
IRQ 0D   Exclusive   Numeric data processor
IRQ 13   Shared   3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13   Shared   NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14   Shared   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14   Shared   Standard OpenHCD USB Host Controller
IRQ 15   Shared   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15   Shared   Standard Enhanced PCI to USB Host Controller
IRQ 15   Shared   NVIDIA® nForce(TM) IDE Controller
IRQ 16   Shared   NVIDIA nForce MCP Networking Adapter
IRQ 16   Shared   Standard OpenHCD USB Host Controller

The file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

the file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

Save with Maximize Compatibility in CS6.
Choose Edit > Preferences > File Handling (Windows) or Photoshop > Preferences > File Handling (Mac OS).
From the Maximize PSD and PSB File Compatibility menu, choose any of the following:
Always
Then re-save your file so it can open in CS2

IOS 5 and DPS issue? Trouble shooting help needed.

I have a reader with a problem. I can't seem to tell him what the problem is and how to fix it. He is the only one that I know of with the problem. Turns out the story the problem happens on is also the story he wrote for the latest issue.
He has an orginal iPad 1, running iOS 5 (I do all my proofing etc off a iPad 2)
My DPS App was updated to v24 to address the crashing issue once iOS 6 came to be. Prior to this current issue being made available.
The first two issue I produced were v23. Latest folio and the one with the problem is a v24
He says he has updated the app itself to the v24 version
This is what he reports keeps happening.....
No matter what I do as soon as I open the current issue and go to my column, on the 3rd page where it says "Make Your Personal Weather Apps" when I press where it says "PRESS FOR INTERACTIVE DEMO," the trouble starts. The demo proceeds for 3-4 pages and then crashes, completely wiping out the entire file. Then I have to go back to the home screen and completely download the entire issue again. I've tried this at least six times, and get the same frustrating results every time !!
Are there known issues with orginal iPad 1's and DPS?
Did he think he downloaded the most recent version of the app?
Is there a real problem? That I can fix?
Wait to see if any one else complains?
Thanks in advance.

Thanks again for the help. Here are the IRQ Settings:
IRQ 00   Exclusive   System timer
IRQ 01   Exclusive   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03   Exclusive   Communications Port (COM2)
IRQ 04   Exclusive   Communications Port (COM1)
IRQ 06   Exclusive   Standard floppy disk controller
IRQ 08   Exclusive   System CMOS/real time clock
IRQ 09   Shared   Microsoft ACPI-Compliant System
IRQ 0A   Exclusive   MPU-401 Compatible MIDI Device
IRQ 0C   Exclusive   PS/2 Compatible Mouse
IRQ 0D   Exclusive   Numeric data processor
IRQ 13   Shared   3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13   Shared   NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14   Shared   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14   Shared   Standard OpenHCD USB Host Controller
IRQ 15   Shared   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15   Shared   Standard Enhanced PCI to USB Host Controller
IRQ 15   Shared   NVIDIA® nForce(TM) IDE Controller
IRQ 16   Shared   NVIDIA nForce MCP Networking Adapter
IRQ 16   Shared   Standard OpenHCD USB Host Controller

Looking for trouble shooting help -Connections being dropped from app.

I need a little help in hunting down the source of a problem. We have Oracle 10gR2 (10.2.0.1) running on Solaris 10. The web application is based on WEBLOGIC on another server also running Solaris 10 with a new firewall in between. When started, the application will get 176 connections to the database. Over time, still working on how long, the connections get dropped. The profile they app is connecting to is for unlimited connections and connection time. I do not have an setting to disconnect after idle for x minutes. Even the listener spawned processes die. Other applications from other machines also have problems if idle for a period of time, SQLDeveloper, SQLPlus, TOAD, SQLNAVIGATOR.
We are trying to hunt down the source of the problem but are at a loss. I have checked and verified that the oracle instance does not have a parameter set to kill idle connections for the users the apps are connecting as. The sys admin says there are no unix parameters he knows about on either solaris box that is killing connections and that the firewall settings should not be killing them.
A duplicate environment running all the same versions of software work fine, the only differences between the two is the box and operating system, Sun V120 w/Solaris 8 vs. Sun V40Z w/Solaris 10.
This system goes live in two weeks so we are trying to get this figured out soon. Any hints on where to look or has any one else had similar problems?
thanks

listener.ora on Oracle server machine:
# listener.ora Network Configuration File: /u01/app/oracle/product/10.2/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ng-db01)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
Weblogic machine is not useing a client so has no sqlnet.ora file on it. Others having problem:
# sqlnet.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

Trouble shooting help needed for Elements 9

When I go to "FIX' in Elements 9, I get a Runtime Error message followed by this screen: Adobe Photoshop Elements 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avaiblable." I have not received a notification from Windows. This issue started yesterday--no previous issues with the program until then.

Thanks again for the help. Here are the IRQ Settings:
IRQ 00   Exclusive   System timer
IRQ 01   Exclusive   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03   Exclusive   Communications Port (COM2)
IRQ 04   Exclusive   Communications Port (COM1)
IRQ 06   Exclusive   Standard floppy disk controller
IRQ 08   Exclusive   System CMOS/real time clock
IRQ 09   Shared   Microsoft ACPI-Compliant System
IRQ 0A   Exclusive   MPU-401 Compatible MIDI Device
IRQ 0C   Exclusive   PS/2 Compatible Mouse
IRQ 0D   Exclusive   Numeric data processor
IRQ 13   Shared   3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13   Shared   NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14   Shared   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14   Shared   Standard OpenHCD USB Host Controller
IRQ 15   Shared   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15   Shared   Standard Enhanced PCI to USB Host Controller
IRQ 15   Shared   NVIDIA® nForce(TM) IDE Controller
IRQ 16   Shared   NVIDIA nForce MCP Networking Adapter
IRQ 16   Shared   Standard OpenHCD USB Host Controller

Trouble-shooting help - New Mobo

I have a brand new MS-6378 (v3) MSI motherboard + AMD Athlon 1.1GHz CPU, 350 PSU (P4 enabled), 1 x 128 MB SDRAM DIMM.
All setup according to installation guide.
Processor is AMD A1100AMS3B which indicates a 200MHz Clock, 256K L2 Cache, 1.1GHz....all within spec for the Mobo
Motherboard set to 100MHz FSB
PROBLEM:
When booting I get no Video signal (yes, it's connected correctly) and after 30-40 seconds the Mobo shuts down.
I've checked and rechecked setup and changed the FSB to 133 with no difference.
Any help would be greatly appreciated. )
Thanks,
Mike

(I not allowed to edit my mesgs...strange).
[size=15]Update[/SIZE]
Make sure the motherboard was installed properly to the chassis (the board should not touch the chassis)
DONE
Make sure all the components (memory, CPU, AGP & power supply connectors etc.) are properly installed
DONE
Clear CMOS
DONE
Change to another power supply
DONE
Change to another memory
Checked memory on another computer. It works great.
Change to another AGP card
N/A - onboard video driver

"Shockwave Flash has crashed". Trouble shoot help needed

whenever I go to a website to play a game or watch a video, i keep getting this message accompanied by an angry puzzle piece character. I have tried numerous troubleshoots on google and found nothing that worked for me.... I have also 'powerwashed' my chromebook and restarted it with no luck.... However when i go to the Adobe page to test the shockwave player, it works perfectly fine. I am getting entirely too far behind in my school work and I need this fixed ASAP, any help is appreciated. Thank you in advance.

I have a brand new Samsung Chromebook, so I am not exactly sure... possibly Chrome or linux

Trouble Shooting help with broken system

See sig for system.
Today I was just sitting there enjoying myself and decided to run diskeeper on my D:
PATA drive when pop went the weasel. The computer won't boot to windows.
All the info the BIOS gives me looks good ie the sata and pata controllers are functioning as is the lone IDE drive.
I looked at the board and one of the sata ports is pulled slightly away from the board
yet the drive is recognized on it as it is on the other.
I have another PS that I will try tonight or tomorrow but was looking for some troubleshooting expertise.
Other info: Hangs for a spell when loading atapi.sys
Won't boot my other OS 64 bit XP which was hidden when the error happened
Any Advice? No way to test the SATA drive
Thanks
Ahumado

Quote from: Hans on 11-August-06, 02:17:32
As long as you don't re-initialize the PATA-RAID, nothing will go wrong. Simply keep an eye on any messages that warn you about data-loss.
I read the manual and it states I may lose data but probably not. Ok if I delete the array where does the data go? Drive 1 or Drive 2 or ? and can I access it by merely hooking the drive(s) to IDE? I have a ton of data and I can move it and back it up but if I don't have to I don't want to.
Or is that the only way to go. Once arrayed always arrayed? As you can see I'm confused and need some spoon fed hand holding or the like.
Thanks
Ahumado

Messaging troubles! Help, please?

I used to have my iPhone 4 remind me five times every two minutes about texts, but after the IOS5 update, I can no longer figure out how to do that. How would I go about turning that function back on?

Go to settings >> notifications >> messages. Change the "repeat alert" setting.

Trouble shooting the export function

I am a new user to CS4 Premiere 4.1.0 as part of my master suite program bought 2 weeks ago. I can't find any trouble shooting help or explanation of error messages in the program's help section; I have tried most of the trouble shooting steps (other than reinstalling the entire suite) from the knowledge base on the Adobe site without any success; and finally would like someone on this forum to rescue my newly installed Premiere from disaster. Here is my problem:
---- when exporting utilizing the media encoder; after exporting and clicking on the encoder to start , the program would come back with the following error message " PProheadless has encountered an error. [..\..\Src\Remote Import Module. Cpp-250]". I can't find any reference to this error code and how to fix it on the Adobe website. I have tried to fix it for days now without any results. Without being able to fix this my programs are useless to me.
Not finding any reference on the Adobe manual to the error code or how to trouble shoot the program is really demoralizing and disappointing to me. You can see PProHeadless as a program on the computer's hard drive but you won't find any reference to this program throughout the Adobe website.
For reference my hardware specs. are: i7 920 CPU, 6 G DDR3, Asus P6T professional work station main board, 160 G SSD SATA C-Drive, 1 tera byte SATA D and E drives, the GPU is nvidia GTX 285 with 1 GB ram, 1000 Watt power supply in a mini tower, plus Sony Blue ray, OS is Vista 64 premium. The computer is dedicated to editing video. All programs are loaded on C; the D drive is used as working space and virtual ram. E drive is for storage. The only other program running is Avast anti-virus program. The file exporting problem stays even when Avast is uninstalled. All the devise drivers are Vista 64 compatible. The computer is brand new; dedicated to Premiere - not even Microsoft word is loaded.
In addition to the above exporting problem, every time I switch between loaded programs such as between Premiere and Firefox, the cursor would stay in the "wait" mode, i.e. in a spinning circle, for about a minute before turning into an arrow in Premiere. It almost feels like Premiere has to reload the ram all over again; this is really annoying and time wasting.
If I have known of these issues, I would have bought a Mac Pro with Mac software in the first place.
I would really appreciate some help from friends and experts on this forum. Thank you.

Do you have a dynamic or fixed dimension table?
Looks like you have a fixed dimension table here...
Using -> [*] is to specify each instances of that object inside the subform specified... Here if you have more than one PSI into Row5 it would work... But as I understand you have to write only Avg(Row3.PSI, Row4.PSI, Row4.PSI)
If you have a dynamic table and your row is only named Row1... each instances of the row would be Row1[0], Row1[1], Row1[2]
So in your Average function you would only write :
Avg(Row1[*].PSI) and it would return the average of each rows

Photoshop elements 11 install stops at sharing progs . Have tried all the trouble shoot info. All useless. Help Please

Photoshop elements 11 install stops at sharing progs . Have tried all the trouble shoot info. All useless. Help Please
Windows 8.1 OS

Does everything include this:
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help

I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help

no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.

How can I back up ipad on icloud? Keep getting message "There was a problem completing the back up. Please try again later." I have, many times! The trouble shooting info does not resolve the problem.

How can I back up ipad on icloud? I keep getting the message "There was a problem completing the back up. Please try again later." I have done so MANY times! I've followed the instructions ( I believe!) and the trouble shooting info does not resolve the problem. Can you please help?

I had this exact same problem because the router i had in my house was having interference issues and the speed was too slow to do it.
I would download a speedtest app on your iPad and see how fast your internet is. I think the app is called speedtest in fact.

I need to export a photo at around 1meg file size,and dont seem to be able to do it in the presets can anyone help please ,I shoot on a canon 5d

I need to export a photo at around 1meg file size,and dont seem to be able to do it in the presets can anyone help please ,I shoot on a canon 5d

I believe Frank is referring to the end use (e.g., for print or on-screen use).
Until he returns, I can tell you that I ran a quick test using an image from the Aperture 3 training book library which was as follows:
Camera = Canon EOS 5D Mark II
Master resolution = 5616 x 3744 (21 MP)
I was able to export to a JPEG with end file size of 1 MB as follows:
Export Presets drop-down > select 'Edit' option
Selected preset name 'JPEG - 50% of Original Size' > change percentage value to 40% > change DPI value to '300' > click OK to set as current default > Export version to desktop.
The exported JPEG has a resolution of 2246 x 1498 and appears on screen to have the same image quality of the original in Aperture.
Note - I did not change the default Image Quality slider in the Export Preset dialog (which left it at 10).
Basically, you will need to play around with the settings until you find the appropriate values to arrive at an image version you want.

Trouble shooting help PLEASE

Similar Messages

Maybe you are looking for