Trouble shooting not working

I've tried all of the trouble shooting recommended for the authorization loop for playing a purchased song, what do I do if I still can't get the song to play?

Itunes feed:
https://itunes.apple.com/us/podcast/the-q-episodes/id534328973?mt=2
Feedburner Feed:
http://feeds.feedburner.com/theqnow
Original feed:
http://www.markbland.net/1/feed
Original feeds the feedburner and Feedburner feeds the itunes. Original to itunes was not working properly

Similar Messages

Green videos, trouble shooting not working.

My flash videos on FB are green. Advice is to open settings control window and go to display settings; then disable accellerators. When I open the settings window, I have no display settings tab, only settings for privacy,security, storage, etc. How do I get display settings, or how else can I get my videos working on FB? I have a PC with windows 8 and using internet explorer. I have followed all the troubleshooting. I have made sure adobe is installed and enabled, I have made sure shockwave is enabled in manage add ons, I have made sure active X controls are shut off, I have made sure that windows was updated for my version of adobe. I have also asked this question 2 times already, only to have it disappear so I hope this one gets posted and I apologize if it's a repeat.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, or hardware acceleration, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.

My HP deskjet 3070A is displaying the error code 0x19a0041, and no trouble shooting tips working.

I have spent all morning trying to resolve a problem on my hp deskjet printer (3070A) keeps displaying 'printer failure 0x19a0041' I have worked through all the trouble shooting tips on your website, but none seem to be working, so I tried to request a service, so then I tried to re-new my warranty, to request a service, but the system couldn't process my request. I then tried to call your helpline numbers listed in your website, but the number is no longer in use. Please help! I am at my wits end, as have spent a whole morning trying to sort this out! Thanks, Sarah

i tried to reset the printer as you said. it worked. and completely destroyed it. it keeps asking for the setup cartridges, which i still have, but they're not new ones. which i have found out, is a MUST for the printer to recognise them and start up. since you work for HP is it possible for me ask them to fix this without charge? i cannot check my warranty because my ORIGINAL problem which i was trying to fix does not allow me to install the driver for the printer and therefore i cannot detect whether my warranty still covers the product. Nor does the the printer allow me to scroll down and check my ID model number in the information menu for some insane reason, so i cannot even check manually....
ah the terms of use seem to say that i cannot ask them to fix this mess without charge. great.
do you have any advice?

Trouble shooting for work flow not getting triggered

Hi everyone,
I am doin a work flow for which the zfipp-> created event is the trigeering event.
I parked a document using FB03,but still the workflow is not geeting trigered.
I checked SWEL ,i see that the event is trigered.
Also whe i simulate the event using SWU0
I see that the workflow triggeres then.
Any advice where the problem could be..
regards,
Aditya

Hi,
Have u done the event linkaga?
If not goto SWE2 and do the event linkage.
Thanks and Regards

OS update troubles, password not working

Trying to update to new OS and my password is rejected. I know it is correct because I am logging in successfully online, and anywhere else it is needed. But each time I try to install the new OS on my iPad, the password is rejected! To make matters worse, I am finding it very frustrating to contact support. I managed to chat with support yesterday, only by accident. I have no idea how I stumbled onto it, and can't get back. The guy also disconnected me unexpectedly. Very disgusted with Apple right now. HELP!

Thank you! Problem solved. I'm still baffled as to why Apple could not provide me this simple answer though. I find the support web pages very unhelpful. Again, thank you.

My mail is not working from my ipod i looked it up it says it trouble shooting but its not giving me anything to fix it can someone help me?

My mail is not working from my iPod touch. I looked it up and it says it trouble shooting? But they are not giving me anything to fix it. I restored my iPod touch to see if that worked and it didnt. Can anyone help me?

Can you access the account from another device?
Without you telling use the email provider and type of account we can't really help you.

My Homesharing is not working! How do I trouble shoot?

My Homesharing is not working.How do I trouble shoot?

Hi car12man,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972?viewlocale=en_US
Cheers,
- Judy

After updating to Firefox 4, it will not open. I end the Firefox processes in Task Manager per trouble shooting procedures; still not working. Removed and re-installed. No go.

Can I revert to an older version? I tried all your published trouble shooting procedures to no avail to get Firefox 4 to open. When I try to run it, there is a process running in the Task Manager but no task or program actually opens.
I never had any problems with previous versions.

There are various causes for this error, see [[Firefox is already running but is not responding]] for details.

TS1702 I have purchased Translate SMS and it does NOT translate. Have tried all trouble shooting and still not working

I have purchased TRANSLATE SMS and it does not translate.
I have done all the trouble shooting that apple advise and still nothing.
Has any one got any suggestions?

When you contacted the developer, what did they say?

Some of the keys on my keyboard do not work. I've run through the trouble shooting tips and still no solution.

Wireless keyboard - Not all Keys work. For example: the top F1 through F12 and the right side shift key do not work.
Any thoughts?
Thank you in advance.

Fast answers:
1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
https://discussions.apple.com/thread/3819550?start=0&tstart=0
2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

TS4079 Siri is not working since 7.0 upgrade - if I turn Siri off it works with voice command. Microphone functions with other apps just fine. I have gone through the trouble shooting page and still nothing. I read others are having the same issue.

I have restarted the phone and reset it - Siri still not working. It does not pick up any voice - just lists some options.

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Kisight: How do I get my iSight working ? Trouble Shooting an iSight Camera. (Version 3)

Replacement for the second draft of this Thread   (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi,     On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM      Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Replacement for the second draft of this Thread   (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi,     On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM      Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

Did it work with previous ii.x version?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

My new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips

my new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips

This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Trouble shooting not working

Similar Messages

Maybe you are looking for