Trouble signing into Android Market
When trying to enter Android Market on my new Razr Max I am presented with characters to enter. This works fine on a PC but on even the large Razr screen with 400% glasses, I can't make out the scripted characters and can't get by this. Any suggestions?
Please take any of the following steps that you haven't already tried. After each step, quit and relaunch Messages and/or FaceTime and test. Stop when the issue is resolved. If none of the steps helps, post your results.
Step 1
Make sure that caps-lock is not on and that you're entering the password correctly. If necessary, type the password in a TextEdit window and then drag or copy it into the Messages sign-in dialog.
Step 2
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage," "FaceTime," or "Apple Persistent" in the name.
Similar Messages
-
I'm probably doing this all wrong. Just in case here it is again.
I'm having trouble signing into the iCloud Control Panel. None of the iCloud suggested fixes work. I'm using Windows 7 on a PC. Is there a simple fix out there?asdfjava-er wrote:
The book that I'm using said it wasn't necessary for this because it's supposed to just make sure everything is working properly--which it's not.OK, if you want to ignore my advice, so be it, but please don't complain that it is not going to work without even trying it yourself.
asdfjava-er wrote:
Now this is the part I don't get. The book tells me to go to http://localhost:8080/ch1/Serv1 even though there are no files/folders that have the name Serv1.
Do you understand what the <servlet-mapping> declaration in the web.xml means? It is roughly just saying the appserver that it should port all requests on /Serv1 to the mentioned servlet.
a couple others like/ch1/WEB-INF/classes/Ch1Servlet.class and /ch1/WEB-INF/web.xml. The WEB-INF folder is not public accessible, so forget about that part.
"Resource not found" simply means that either the URL is wrong (case counts!) or that the resource is actually not there. I.e. not compiled, not deployed, not loaded, etcetera. Reading the appserver's startup logs might also help. -
I am having trouble signing into my adobe account on my tablet it says failed to authorize device?
I am having trouble signing into my adobe account on my tablet. When I sign in it says failed to authorize device when I sign in and I have used my adobe account on this tablet in the past.
I have tried that several times as well. All that I get is a white screen that says "hello" and tells me "Update Completed Your iPhone was updated successfully. There are just a few more steps to follow, and then you're done!" so i click "continue" it asks for my iCloud password, I put it in and it goes black gives me white apple logo then takes me right back to where I started with the white "hello" screen displaying. Ive tried resetting my password multiple times and nothing is happening, I dont know what else to do.
-
Hi, Does anyone else have trouble signing into iMessage. I used to use it all the time. Then I had some problems with my Apple ID and also got a new computer. Now I can't sign into it at all. It just spins and spins like it's working on it, on my computer. On my iPad it says it can't sign in with the ID and password I've given, which I KNOW for sure is correct.
Please take any of the following steps that you haven't already tried. After each step, quit and relaunch Messages and/or FaceTime and test. Stop when the issue is resolved. If none of the steps helps, post your results.
Step 1
Make sure that caps-lock is not on and that you're entering the password correctly. If necessary, type the password in a TextEdit window and then drag or copy it into the Messages sign-in dialog.
Step 2
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage," "FaceTime," or "Apple Persistent" in the name. -
Inconsistent trouble signing into Websites/apps?
I require some help as I am having trouble signing into things on my mobile, such as Skype and checkoutsmart. the problem manifests sometimes with applications, sometimes with websites. I am 100% sure the passwords I am entering are correct - I have tried them on my laptop, and even got password resets and then copied and pastes, but it won't let me sign in.
It is very inconsistent, for instance the same password works on the Skype app but it does not work if I try and sign into the Skype website - but then if i test the same password on the same site on my laptop it works.
I have checked I am up to date with the latest software, I have even deleted and reinstalled the apps affected, ensured the case of the passwords is right, most of most obvious and normal things to try.
However, none of these fixes have worked. I'm not even 100% sure it was the phone but I didnt have these problems before I started using the handset and I'm not sure what else it could be - if anyone has any advice i'd appreciate it!
Solved!
Go to Solution.@Phy he won't be able to load skype in safe mode.
@LogicalHarm Can you try to contact skype?
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
Trouble signing into Business Catalyst
Hi,
I can't sign into my Business Catalyst account since this afternoon. I got so confused that I asked them to send me a password reminder, but if I click on that link I can enter a new password and confirm it, but it won't change it. It just goes away. So I changed my Adobe-Id password and tried it again. Same thing. I have Business Catalyst only since yesterday and created a couple of new Email addresses one of which I used for my Adobe-Id. Now I'm not sure if I have to use the old Email address with Business Catalyst or the new one and the old or new password. Anyway I tried all combinations and it just won't work. Hope you can help me with this issue. Thanks very much.Hi,
The error message is: ERROR: Either your username, password or both are incorrect ERROR: 1.
The username is [email protected]
I was on the chat with someone this afternoon and they couldn’t fix it. They even gave me a new password to try, but it still doesn’t work. I have changed the AdobeId yesterday as I have created a new Email address in Catalyst and so I don’t have to use my gmail one anymore. It works fine with all other logins, just not Business Catalyst. No matter which combination I try. The one from the chat couldn’t resolve the problem and said she’s going to pass it onto a higher level of support, but I haven’t heard of them yet unless it is you.
Von: Aishvarya Raj Rastogi [email protected]
Gesendet: 10 February 2014 18:52
An: Planetvista
Betreff: Trouble signing into Business Catalyst
Re: Trouble signing into Business Catalyst
created by Aishvarya Raj Rastogi <http://forums.adobe.com/people/aishvarya+rastogi> in Business Catalyst - View the full discussion <http://forums.adobe.com/message/6106274#6106274 -
Having trouble signing into Story through Premiere Pro CC
Hi all,
I'm having an issue signing into Story through Premiere Pro. I'd like to attach a transcript saved on story to a clip in premiere pro to be able to eventually use speech analysis. And the tutorials online suggested going to window and opening adobe story panel. Once I do that, I'm prompted to sign in with my adobe account, but my adobe email and password combination gives me an error message: The password you entered does not match your Adobe ID.
Does anyone know a solution or work around to this? It seems like it should be so straightforward...Ah. Hmmm. I am an Android user and Premiere Pro likes my video just fine.
Is there a way to convert the iPhone video to constant fps, or is there a setting that records it that way?
Edit: if somebody would send me a link to some iPhone 5 video that I could download and mess around with, I would appreciate it.
Edit: Couldn't Quicktime be used to convert it to a contant frame rate? -
Trouble signing into Apps Store
Hello everybody, I need some help here! I have a problem accessing Apps Store after updating to Maveriks, everything works just fine
except for when I need to sign into Apps store, it keeps me waiting and nothing happens untill I press Cancel. ANY help would be really useful
ThanksPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot insafe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Having trouble signing into Imessage?
If you have tried all the tips from other users try going into your date and time settings and checking the box to set time date/time automatically. This worked for me and a couple others as well.
Hello Diane Smiley,
The steps detailed below can help resolve this error and get your signed into iMessage.
If you see "Could not sign in, please check your network connection and try again" when signing in to your Apple ID
To resolve this issue, follow these steps.
Update to the latest version of iOS.
Verify that you have a data connection by going to www.apple.com in Safari. You can complete Apple ID activation using Wi-Fi or a cellular data connection. If you need help connecting to Wi-Fi, follow these steps.
If you're using Wi-Fi, make sure that your local Wi-Fi network is using the recommended Wi-Fi settings.
Sign in to your account and ensure that the primary email address and alternate e-mail addresses have been verified. If verification is pending, follow the instructions in the email Apple sent to that email address to complete verification. Or remove the e-mail addresses from the account.
If your Apple ID isn't an email address, you can change it. The Apple ID that you're using to activate FaceTime or iMessage must be an email address. Find more information on how to change your Apple ID.
Tap Settings > General > Date & Time. Make sure that your iPhone is set to the correct time zone. If Set Automatically is on but the wrong time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
Enable iMessage and FaceTime while connected to a different Wi-Fi network (in a different location) if a cellular data connection is not available.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers,
Allen -
Server Error---Trouble Signing into FaceTime?
Hello,
I just got a MacBook as a gift, so I am not sure of any settings, apps, systems, etc. I am trying to sign into FaceTime and I keep getting an error, in red letters, about not being able to contact the server, and that I should try later. Does anyone know how to fix this? I have looked at other discussions about "/etc" files, and I can't find how to do that. So, I am at a lossWhile we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac
-
Trouble signing into apple I.D
I can not access my apple I.D to download apps it show my previous email address instead of my current one
Hello Diane Smiley,
The steps detailed below can help resolve this error and get your signed into iMessage.
If you see "Could not sign in, please check your network connection and try again" when signing in to your Apple ID
To resolve this issue, follow these steps.
Update to the latest version of iOS.
Verify that you have a data connection by going to www.apple.com in Safari. You can complete Apple ID activation using Wi-Fi or a cellular data connection. If you need help connecting to Wi-Fi, follow these steps.
If you're using Wi-Fi, make sure that your local Wi-Fi network is using the recommended Wi-Fi settings.
Sign in to your account and ensure that the primary email address and alternate e-mail addresses have been verified. If verification is pending, follow the instructions in the email Apple sent to that email address to complete verification. Or remove the e-mail addresses from the account.
If your Apple ID isn't an email address, you can change it. The Apple ID that you're using to activate FaceTime or iMessage must be an email address. Find more information on how to change your Apple ID.
Tap Settings > General > Date & Time. Make sure that your iPhone is set to the correct time zone. If Set Automatically is on but the wrong time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
Enable iMessage and FaceTime while connected to a different Wi-Fi network (in a different location) if a cellular data connection is not available.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers,
Allen -
Evertime I try to sign into CC and I put in my email address and password, it says you have been sign out??
Please take any of the following steps that you haven't already tried. After each step, quit and relaunch Messages and/or FaceTime and test. Stop when the issue is resolved. If none of the steps helps, post your results.
Step 1
Make sure that caps-lock is not on and that you're entering the password correctly. If necessary, type the password in a TextEdit window and then drag or copy it into the Messages sign-in dialog.
Step 2
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage," "FaceTime," or "Apple Persistent" in the name. -
Trouble signing into webmai: getting constant redirects
Since late last night I've been having trouble logging into Verizon Webmail.
The title bar constantly "ping-pongs" between https://signin.verizon.com/sso/RememberMeServlet
and ...STIDServlet and ....VOLPortalServlet (this is in Safari but a similar thing happens in Firefox, too)
and also on my laptom.
I'm running OS 10.6.4 on both machines.
On the advice of someone at the Apple Discussions Board I deleted all Verizon cookies on
my desktop's hard drive as well as passwords in KeyChain, and restarted Safari but the
problem resumed.
Verizon tech support denies a problem and suggested I'd either changed a Safari
setting (wrong) or installed an Apple update (also wrong)As of last evening I was no longer getting the redirects but requests would often hang or
be glacially slow.
As of this morning the problem seems to have been fixed.
I wish that in the future Verizon would:
a) keep tech support informed, if in fact tech support was unaware of any problem
and
b) keep us informed
and
c) tech support would not take the "blame the customer" attitude. We're not all "newbies". -
I'm having trouble signing into Facetime on my ipad mini.
I keep trying to sign into my Facetime on my ipad mini and after verifying, it comes back to the sign in screen. I tried to reset the settings and that didn't work. Anyone else have any suggestions?
Hello Diane Smiley,
The steps detailed below can help resolve this error and get your signed into iMessage.
If you see "Could not sign in, please check your network connection and try again" when signing in to your Apple ID
To resolve this issue, follow these steps.
Update to the latest version of iOS.
Verify that you have a data connection by going to www.apple.com in Safari. You can complete Apple ID activation using Wi-Fi or a cellular data connection. If you need help connecting to Wi-Fi, follow these steps.
If you're using Wi-Fi, make sure that your local Wi-Fi network is using the recommended Wi-Fi settings.
Sign in to your account and ensure that the primary email address and alternate e-mail addresses have been verified. If verification is pending, follow the instructions in the email Apple sent to that email address to complete verification. Or remove the e-mail addresses from the account.
If your Apple ID isn't an email address, you can change it. The Apple ID that you're using to activate FaceTime or iMessage must be an email address. Find more information on how to change your Apple ID.
Tap Settings > General > Date & Time. Make sure that your iPhone is set to the correct time zone. If Set Automatically is on but the wrong time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
Enable iMessage and FaceTime while connected to a different Wi-Fi network (in a different location) if a cellular data connection is not available.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers,
Allen -
Trouble signing into the App Builder
I just designated an Adobe account as a Viewer Builder account in the Account Administration tool but when I start the App Builder and try to sign in I get an error message that says "sign in failed. please try again." Am I missing something in this process?
Try signing into the DPS dashboard first.
Maybe you are looking for
-
Problems with animated gifs in Premiere Pro
Hi everyone, I need some help with my video project - I made some animated gifs that I want to add to the end credits. Importing them etc. works just fine, but in the video, the images always show up with a white background (white "box" around the an
-
Cintiq performance on Macbook Pro vs. new Mac Pro
Has anyone used a Wacom Cintiq (I'm using the 20" model) on both a recent Macbook Pro (I've got a 2.4 mhz Santa Rosa 4gb ram) and one of the new 8 core Mac Pros? I'm interested in the cursor lag in Photoshop CS3 and Painter X. I realize there are a l
-
Php page won't display the first record
I have the following code, but it always skip the first row of the records pull from an Oracle table: include "utility_functions.php"; // Form the query and execute it $sql = "select * from dept where cid=".$_GET['q']; $result_array = execute_sql_in_
-
When sending a group e-mail, with my new iMac (retina 5K), everyone has been able to see the other addressees. Checked 'When sending to a group, show all member addresses': this box was NOT ticked.
-
SRM 7.0 Invoice Rejection in SRM Portal
Hi, We have come across a scenario where an approver is unable to reject an invoice in their tasks queue. An error message of "/sapsrm/cx_pdo_error Reason for rejection is mandatory" appears However, when they reject a Shopping Cart for example, it w