Trouble Slowing Down Audio Files Using QuickTime.

Hello. I am currently using QuickTime to listen to audio files. Some of these file are so fast that I need to slow them down to hear everything. However, when I click the "Slow Down" button that is located at the top of my player, the files continue to play at the same speed.
I have tried downloading the most recent version of the QuickTime player, and I still have the same issue. Any advice on how to fix this issue would be greatly appreciated.

Here's a link through to your Drivers and Downloads page at Dell:
[Drivers & Downloads for Latitude C840|http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen &ServiceTag=&SystemID=LATPNT_P4C840&os=WW1&osl=en&catid=&impid=]
Probably best to enter your Service Tag (don't tell us what it is). Then you'll just see updates applicable to your particular configuration of C840. (Componentry can vary "within" a particular model, not just from model to model. So not all the updates I can see there will necessarily apply to your particular system.)

Similar Messages

How do you slow down audio files?

Hey everyone! I was wondering if there is a way that you can slow down audio (not midi) in Logic. I really need that ability so I can start transcribing a lot of pieces for my music lessons...
If Logic doesn't have anything like that, is there a free software I could download (that is NOT one of those trial ones that only play 3 min of the song or can't export)? If it costs somethin', which one is cheapest but has good enough quality?
Cheers, thanks!

Have you tried to use the Time and Pitchmachine within the Sample Editor of Logic. To a certain degree you could certainly slow it down. If youre not happy with that, you probably would have to use another software or buy a third party plugin (like serato's pitch n' time)...
Manuel

Slow down audio for language learning

My students want to decrease the speed of audio mp3 files for language learning purposes. How can this be done in iTunes on the following devices?
(a) on a Mac
(b) on Windows
(c) on an iPhone
(d) on an iPod
(e) on any other mp3 player you can name
If not iTunes, in another player?

Thanks, Kappy. Those desktop apps would be too pricey for my language learners. I use Audacity for this and other purposes, but it may require more steps than they can handle or have patience for.
They want to slow down audio files on their handheld devices. I see you can speed up a podcast 1x - 2x, but I don't see that you can slow it down.
Your suggestions pointed me in the right direction to search for an iPhone/iPad app. For any of you musicians and
linguists out there, I found
Anytune - Slow Down Your Music to Speed Up Your Learning
V. 3.0 Free with ads, $1.99 ad-free
By Anystone Technologies, Inc.

How do i save an audio file using quick time?

How do i save a audio file from quick time. When I looked it up I was told to go to file on quick time and click on save as but my quick time has no save as to click on in file. What Now?

How do i save a audio file from quick time. When I looked it up I was told to go to file on quick time and click on save as but my quick time has no save as to click on in file. What Now?
You need to explin your workflow better.
The "Save" action may be initiated by a "Share" or "Export" option depending on the app you are using. For instance, QT 7 Pro has "Save", "Save As...", "Share...", "Export...", and "Export for Web..." options depending on what you are specificly trying to do. On the other hand, QT X may have "Duplicate", "Export...", Export To", and/or "Share" options for various goals.
Are you trying to record a new audio file using a mic, extract and save an audio track from a video, export audio from a video file, save an internet audio file that opened in the QT player, save an online audio file, etc?

How to export/watch .avi files using Quicktime Pro

Hi there.
I've got Quicktime Pro and I'm trying to convert .avi files so I can play them on my iPhone. I open up the .avi file in Quicktime and then slect the Movie to iPhone option.
It will take about 20 mins or so, but when I open the file all I get is a white screen even though the timer is showing that the movie is playing.
I can't even watch .avi files using Quicktime as all I get is a black screen.
Could someone please help?
Thanks

Thanks, but unfortuntately that didnt work. MPEG Streamclip couldn't play any of the .avi files, it still came up with a white screen while playing.
I tried this with a number of .avi files but I had the same problem.

Downloading images and audio file using java

Dear All
I have a directory on my webserver which contains images,audio files and many other data files.
I want to download all the file but the problem is when i download image and save it, it is not viewable. I dont want to use Image class as i may have to downlaod audio files too. Please guis which stream shouldi open to download any kind of content using same code.
Thanks in advance. And if u have some example please let me know
Regards
Jafery

downloading images and audio file using java -------------------------------
how to write it back to dataoutputstremI don't understand what you are talking about.
Server: DataOutputStream -> Client: DataInputStream -- the two is a pair.

How to trigger an audio file using midi...

I'm trying to use the Apple AU Audio File Player to play a 10 second track that's an intro to one of our songs, but the only things that show up under the Parameter Mappings for that channel (the one that the AU Audio File Player is assigned to) are MIDI notes, and none of the midi notes trigger playing the audio file. Is there something I'm missing? Is there any way in Main Stage to play an audio file using a midi trigger?

seems not a good question

Recording video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http.

As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?
What I am trying to do, is to record a user's microphone's input and save it to the server. Afterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
How can I redirect the http request to the files I was recorded into my applications/appName folder? Or I need to somehow moved the recorded files to the /webroot folder?
Thanks!

I probably have asked a stupid question.
My recorded streams are still saved in the applications/appName/streams folder.
And I redirect the www.mydomain.com/streams to point to the applications/appName/streams folder.
And the rmtp recorded streams are abled to connect through http now.

Audio failure on converting AVI to Mov files using quicktime pro

I have used quicktime pro for some time to convert avi files to mov files etc for importing into itunes and ipod. However this week all of a sudden the audio fails on exactly 3 minutes and 28 seconds, and does not pick up again. I have not installed anything during that period which would cause this and i'm totally lost.

Do you have Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.

WebKit2Webprocess.exe*32 is slowing down safari when using flash player and using up Lot's of CPU

Im having Major Troubles with Safari whenever I start up Safari I get a Process Called WebKit2WebProcess.exe*32 using not much memory after about 30sec its using around half of what safari is using.After a minute its around 3/4th. But It all starts when I try to basiclly go to another page , its now using higher then safari and rapidlly increasing(and even faster when Flash is in use). Right now the process is using 170 000 K and Safari is using around 130 000 K while im typing this. When i go to youtube it uses 290 000 K and safari runs slower. Its even worse with games when i tested a game
website: http://ninjakiwi.com/Games/Tower-Defense/Play/Bloons-Tower-Defense-5.html
Safari is now lagging furiusly only on the site but not the other tabs.
!!!!Please help Safari is my favorite Browser and i reallly dont want to be forced to delete it!!!!

I love using the Safari Browser compared to any other browser, however the file webkit2webprocess occupies a lot of memory and slows down the browsing, what does this file do and why on earth does it require so much of memory can apple not fix this bug. Have contacted Apple support but nobody seems to have an answer on this issue. Come on Apple please do not ignore this problem!!

Slowing down audio?

I've been searching the forums, but can't find a clear answer.
If I record an audio track (or a few audio tracks), am I able to manipulate the tempo to what I want--ie, make it as fast or slow as I want?
Thanks for the help!

I've been searching the forums, but can't find a
clear answer.
If I record an audio track (or a few audio tracks),
am I able to manipulate the tempo to what I want--ie,
make it as fast or slow as I want?
Thanks for the help!
With Logoc 7.1, which cost $20 dollars to upgrade from 7.0, you are able to "follow tempo" with audio tracks. There is a parameter in the upper left corner of the track in the arrange window where you can select "follow tempo" This only works if the audio was RECORDED in 7.1. If audio was recorded in 7.0, there will be no parameter available, however you can BOUNCE that track, thereby creating a new audio file with that parameter available. The pitch is retained but there are audible artifacts which as far as I am concerned render the audio unacceptable. Sort of a warbling effect. I use this parameter only to keep the audio as a guide if I decide on changing tempos, whereby I will re record the tracks again.

Slowing down audio so the pitch slows down too.

Hey everyone what’s the easiest way to slow wav files o that their pitch is also slowed down as well?
Someone previously suggested loading the sound into the EXS24 but how do I do this? When I drag the audio on that track it doesn’t seem to affect it so how do I actually import it in?
Thanks for any help you can give!
Blair
Mac OS X (10.4.9)

If you ever have money to spare, it won't hurt to get Recycle and Reason. This is second nature in the propellerheads world. www.propellerheads.se There is no easier format to work with samples than REX files(in my opinion). Specially loops.

Can you splice AUDIO files with QuickTime v10?

I just upgraded from a G4 (non-intel) Power Book with QT v 7.7, to a new MacBook Pro with QT v 10.1.
My old G4's QT v 7.7 let me edit audio files - stitch and splice using cut and paste. But QT v10.1 on my new MacBook Pro apparently will only let me "trim" audio clips - the other edit menu functions are grayed out. So no splicing of two audio clips or removing an internal part of a clip.
HELP says I can use those splicing functions for movie files (I assume that means strictly video), but is silent on audio-file splicing.... which is where my interest lies.
Have I lost that audio editing capability by "upgrading"? (QTv 7.2 won't run on the MacBook Pro.). If so, is there another 3rd party app you'd recommend for this purpose?
It's a shame, actually - I was quite pleased with Quicktime as it was.

QuickTime X (version 10 in Snow Leopard and 10.1 in Lion) can only "trim" audio files and the editing features you describe only apply to "videos".
Snow Leopard and Lion users can use two different versions of QuickTime. Version 7.6.6 installs in the Utilities folder and your old Pro registration will enable the editing features you want for audio files.

Con I convert a gif into a movie file using Quicktime?

Trying to convert a GIF file created in Photoshop. I have saved the file as a gif in Photoshop and then opened the gif file in Quicktime Pro, used the "save as" option to create a movie but all I get is the first photo of the gif file and not the series. Any ideas? Thanks.

I have no trouble playing animated GIF in QuickTime Player Pro.
Did you use the right format (87a) in Photoshop? Test the animation by dragging the file to an empty browser window.

Hi-pitched noise on slowed down audio track

I'd like to increase the levels on an audio track that I've slowed down to 50% but I am prohibited from doing so because of a resultant hi-pitched background noise that seems to occur due to the speed change. I tried using a couple of the FCP audio filters (the ones for 'hum remover' and 'high pass filter') - does anyone have any suggestions for this problem? Using FCP 5.0.4.
Any help would be greatly appreciated!

Jim,
Thanks for pointing out that filters could be applied prior to the speed change. I did just try out your possible solution, using both of the filters that I previously mentioned, but the problem remains.
Again - thanks for offering a solution though.

Trouble Slowing Down Audio Files Using QuickTime.

Similar Messages

Maybe you are looking for