Trouble Starting My Laptop
Hello!
Ok, so I went to turn on my Satellite A135-S4656 laptop last night and I can't get it to turn on! It was plugged in and I usually set it on "Hibernate" but when I opened it to start it the light remained blue but made no sound like it was starting up and nothing happened. I tried unplugging it, taking out the battery, and when I tried to shut it off the light turns orange and flashes purple. Does anyone know how I can fix this?
Thanks!!!
Is the fan unit clean and free of dust mites, leave the battery out and try reboot. Llisten for hard drive interaction(small noise ,fan will operate slow to fast and vice versa). If no hard drive feasible the hard drive has died, but cannot be sure.Bes to take to an authorized service provider for a diagnostic and peace of mind.
Similar Messages
-
IBook has troubles starting up: (?)
The iBook of a friend has troubles starting up. She needs an apple for her studies and has had nothing but trouble with this iBook. She has already have to replace the motherboard and faulty RAM at the store where she bought it.
The most recent trouble is this: sometimes the iBook won't start or it takes a long time before it does. On the screen appears (?). Also when she's working with the laptop, the respons time is sometimes very long.
Her teachers said her that this problem is caused by the hard disk. But I've found a topic of a forum, where somebody had the exact same problem and where replacing the HD didn't help.
Does somebody have an idea what could be an answer?
Also, the store only gives a one-year warranty, but since there have been so many parts replaced, isn't there a two year warranty?
Thanks in advance.Hi, and welcome to Apple Discussions.
Here is the link to Apple's Knowledge Base article on recovering from the flashing question mark folder:
http://docs.info.apple.com/article.html?artnum=58042
How long has it been since hard drive maintenance was performed? If it's been awhile, try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
You will see the normal desktop. Once completely started up in Safe Mode, restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar ("Macintosh HD" unless it's been renamed). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if a little hard drive maintenance helps out performance. -
Big Trouble Starting iBook Up!
Hello there, I am having big trouble with my laptop. Here is the story:
Alright, I have two accounts on my laptop. One was the one a usually used and the other was for help with the FileVault problem I was having. I was running a disk cleaning application and a decided I would delete my .sparseimage on the other account. I had fast user switching enabled, so I clicked my other account. In the process of switching over, there is a blue screen - the screen that appears when the computer is loading a user/account. That blue screen never went away. I restarted the computer by pressing the start button for 5 seconds.
Now, when the computer turns on, it will load and even display the "Mac OSX is loading" screen. As soon as it loads all the way, it will go back to the blue screen and not do anything. What is also weird is that on the blue screen, the screen will change back between blue and black (black with white lettering - like when you are in "Single User Mode"). On this black screen, which only stays on for about a second. says something like "My-Name-iBookG4 getty: The operation can not be performed on the drive". Replace "My-name" with my real name - I do not want to share that across the internet .The wording is not word for word, I am at another location where I do not have my laptop with me. When I get home, I will reply to this and give the exact wording. The blue screen will be on for 10 seconds, and then the black screen will go for about 1 second, it keeps repeating. Me and another mac expert worked for about an hour in single user mode trying to fix it over the phone. We just could not do it. Later, I used Disk Utility from the mac start up disk and verified and repaired the disk. That still did not work. Is there any other way to fix this? Is there another application I can try using with the mac instal cd? My absolutely last resort would be to erase the disk and re install. I will do that after a long amount of searching for fixes. Thanks a ton for your help!
LAPTOPER
P.S. I have this same message and the troubles I was having in another part of the forum. To see them here is the link: http://discussions.apple.com/thread.jspa?threadID=895880&tstart=0Good news!
I reinstalled the software from the MAC OSX Install CD. I made it so that it will install the software but yet keep all my files. I can now login and operate my computer!
LAPTOPER -
I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What does it means please provide me solution ASAP
Israr,
Then error indicates that the primary battery (the one you can remove and replace) has a hardware failure. You should run Battery Check in HP Support Assistant.
Wes
I am an HP employee. -
My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?
BigTex415,
my condolences for your family’s loss. If all she seeks to do is to change the display name, and she’s willing to leave the account name unchanged, then she could do the following: log in as the administrative user and open the Users & Groups pane of System Preferences. If the padlock in the lower-left corner is locked, unlock it. Select the account that shows your brother-in-law’s name on the left-hand side of the window, and then on the right-hand side, change the text in the “Full name” textbox to her preferred display name. If desired, click on the padlock in the lower-left corner to relock it. -
How can I change the proggrams my Mac opens when I start my laptop?
How can I change the proggrams my Mac opens when I start my laptop? My mac book Air opens Word and Skype automatically and I can´t seem to make not to do this. Help!
Your Mac will also open anything that was open when it was shut down unless you uncheck this option in the restart and shutdown dialog.
-
I bought my power mac about 5 years ago. Last year I started having trouble starting up when the machine was cold. I put a heater on the unit for about 30 minutes in the morning and then it would start up ok. Through the summer and once the weather got warmer there was no problem.
Now with the start of fall and cold nights, I seem to be having the same problem.
I am concerned that the system drive has five years of usage and am thinking of swapping it out. Any other thoughts???Clone it weekly or twice a month.
Rotate and replace recycle drives
Backup your data even more - daily and weekly sets
In 5 yrs drives have more than doubled in performance, and other than in last month the price per GB (and MB/sec) has dropped.
SSDs are now pppular system boot drives, 10K drives have improved, 2TB $150-200 for media data and backup
Clone your system twice and if it has trouble swap it out and test/zero the drive.
Last year? you don't run on a bad tire or a system having trouble except to pull the drive/tire and put on spare.
There are procedures for repairing a sytem and drives, and then you get into "Why" and troubleshooting causes if necessary. -
hi all
im having trouble getting my laptop to connect to my mac using migration assistant. my mac has a code on the screen but my laptop doesnt respond and just says it waitng for my mac to respond.
any idea? pleaseHi Christina, belated welcome to Apple Discussions if nobody said it already.
I've had some experiences with these new flash memory recording camcorders, and I'll give you a quick rundown of what I've learned. Many of them (JVC, Panasonic, etc.) tend to record in a .MOD file format, which is non-standard, proprietary, and unrecognizable by most software. I thought Canon was usually a little more standards-compliant, but it appears they also use this .MOD format in your specific camera model. There are likely a couple ways we can get around this though!
In order to play the files, you will likely need to change their file format (.MOD) to .AVI manually. You'll have to locate the files on your Mac, and then manually change the file names so that the file extension (after the period) is .AVI
At that point, a video player application such as http://www.videolan.org/vlc/download-macosx.html>VLC should play the files fine!
You should be able to transfer new video files from the camera to the Macbook Pro with no problems as well. Just plug in the camera to the computer via USB, and also make sure the camera is plugged in to charge. Once it's plugged in, open iMovie (came with the MBP, in the Applications folder) and the MBP should take care of the rest.
Let me know if you have any success with any of this!
FYI, the thread that I got some of the above information from is here:
http://forums.macrumors.com/showthread.php?t=478326
--Travis -
hi I was unable to quit Safari on my laptop it is buffering but it is not closing i have re-started the laptop but after re-start the laptop safari is not closing still it is buffering
Please help meForce Quit Safari.
Press command + option + esc keys together at the same time.
Wait.
When Force Quit window appears, select Safari if not already.
Press Force Quit button at the bottom of the window.
Wait.
Safari will quit.
If this does not help, press the power button for 7 or more seconds.
Computer will shut down.
Restart. -
I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
Please helpCheck your login items in the Users & Groups preference pane. Remove any that you don't recognize.
-
Trouble starting Managed Server
I'm having trouble starting a managed server.
I have 'myomain' running on 7001, and attempt to start 'examples' on 7006
as a managed server pointing to 7001 as the admin server.
I've modified a copy of startWebLogic.sh to include the following -D parameters:
weblogic.management.server=127.0.0.1:7001
weblogic.management.password = <password for mydomain>
weblogic.management.username=system
When run, the 7001 access.log contains the following entry, so I know the reqest
is getting to the mydomain server:
127.0.0.1 - - [13/Nov/2000:14:06:13 -0700] "GET /Bootstrap HTTP/1.1" 200 125docs60/notes/issues.html
The terminal session that is attempting to start 'examples' barfs with the following:
<Mon Nov 13 14:12:25 MST 2000> <Error> <Configuration Management> <Error connecting to admin server to boo
tstrap via URL: http://127.0.0.1:7001/Bootstrap, user: system
java.lang.ClassCastException: java.lang.String
at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:756)
at weblogic.management.Admin.initialize(Admin.java:275)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:345)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:160)
at weblogic.Server.main(Server.java:32)
Full Text is attached.
I noticed the post on 27-Oct by Sanjeev Chopra related to a known bug on this subject, but my
error text is quite different and I wasn't sure if this is the same problem.
Please advise.
Thanks
joeI'm having trouble starting a managed server.
I have 'myomain' running on 7001, and attempt to start 'examples' on 7006
as a managed server pointing to 7001 as the admin server.
I've modified a copy of startWebLogic.sh to include the following -D parameters:
weblogic.management.server=127.0.0.1:7001
weblogic.management.password = <password for mydomain>
weblogic.management.username=system
When run, the 7001 access.log contains the following entry, so I know the reqest
is getting to the mydomain server:
127.0.0.1 - - [13/Nov/2000:14:06:13 -0700] "GET /Bootstrap HTTP/1.1" 200 125docs60/notes/issues.html
The terminal session that is attempting to start 'examples' barfs with the following:
<Mon Nov 13 14:12:25 MST 2000> <Error> <Configuration Management> <Error connecting to admin server to boo
tstrap via URL: http://127.0.0.1:7001/Bootstrap, user: system
java.lang.ClassCastException: java.lang.String
at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:756)
at weblogic.management.Admin.initialize(Admin.java:275)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:345)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:160)
at weblogic.Server.main(Server.java:32)
Full Text is attached.
I noticed the post on 27-Oct by Sanjeev Chopra related to a known bug on this subject, but my
error text is quite different and I wasn't sure if this is the same problem.
Please advise.
Thanks
joe -
Trouble starting managed weblogic server on another machine in acluster
Hi,
I was having trouble starting managed weblogic server on another machine in a cluster from the command prompt
I have following setup:
1) BEA weblogic is installed on 2 machines - local machine A with ip address 172.17.2.219 and another machine B with ip address 172.17.2.201
2)node manager is running on both machines
3)An admin server myserver on the local machine at port 7001
4)In the admin tree under Machines a new machine is created 'Machine1' with Node manager Listen Address: 172.17.2.201
5) The managed server 'BEAServerMan1 ' instance is created with listen Address 172.17.2.201 and port 7705. This Server is assigened to Machine1. The server also belongs to a cluster 'Cluster1' where the 172.17.2.201:7705 is part of the Cluster Address.
I can start 'BEAServerMan1 from http://172.17.2.16:7001/console/
But I am unable to start BEAServerMan1 from the console using the command :
startManagedWebLogic BEAServerMan1 http://172.17.2.219:7001
startManagedWebLogic.sh BEAServerMan1 http://172.17.2.219:7001
CLASSPATH=/opt/BEA/j2sdk1.4.1_03/lib/tools.jar:/opt/BEA/weblogic81/server/lib/weblogic_sp.jar:/opt/BEA/weblogic81/server/lib/weblogic.jar:/opt/BEA/weblogic81/server/lib/ojdbc14.jar::/opt/BEA/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/opt/BEA/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/opt/BEA/j2sdk1.4.1_03/jre/lib/rt.jar:/opt/BEA/weblogic81/server/lib/webservices.jar:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03:/opt/BEA/j2re1.4.1_03/bin:/opt/BEA/j2re1.4.1_03:/opt/BEA/j2sdk1.4.1_03/lib/tools.jar:/opt/oracle/OraHome1/jdbc/lib/classes111.jar:/opt/oracle/OraHome1/jdbc/lib/nls_charset11.jarx:/opt/BEA/user_projects/domains/mydomain/myserver/stage/_appsdir_dyn_ear/dyn.war:/opt/BEA/user_projects/domains/mydomain/./myserver/.wlnotdelete/extract/myserver__appsdir_dyn_ear_dyn/jarfiles/WEB-INF/lib/dspjspTaglib1_036773.jar:/usr/bin/j2re1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11:/usr/bin/j2sdk1_3_1_11/lib/tools.jar
PATH=/opt/BEA/weblogic81/server/bin:/opt/BEA/j2sdk1.4.1_03/jre/bin:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03:/opt/BEA/j2re1.4.1_03/bin:/opt/BEA/j2re1.4.1_03:/opt/BEA/ATG6.2.0/home/bin:/usr/xpg4/bin:/opt/bmc/Patrol3/Solaris28-sun4/bin:/usr/bin::/usr/openwin/bin:/bin:/usr/ucb:/usr/local/sbin:/usr/dt/bin:/opt/RICHPse/bin:/usr/bin/j2re1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://<hostname>:<port>/console *
<13-Jan-2005 3:22:20 o'clock PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.4.1_03-b02 from Sun Microsystems Inc.>
<13-Jan-2005 3:22:21 o'clock PM EST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://172.17.2.219:7001 to check if there exists a running admin server at this URL.>
<13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009
WebLogic XMLX Module 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009>
<13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://172.17.2.219:7001 to retrieve the initial configuration.>
<13-Jan-2005 3:22:27 o'clock PM EST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/BEA/user_projects/domains/mydomain/BEAServerMan1 /BEAServerMan1 .log is opened. All server side log events will be written to this file.>
<13-Jan-2005 3:22:37 o'clock PM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<13-Jan-2005 3:22:38 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000328> <Starting WebLogic Managed Server "BEAServerMan1 " for domain "mydomain">
<13-Jan-2005 3:22:50 o'clock PM EST> <Notice> <Cluster> <BEA-000138> <Listening for announcements from cluster Cluster1 on 237.0.0.1:7001.>
<13-Jan-2005 3:22:50 o'clock PM EST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Cluster1.>
<13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <WebLogicServer> <BEA-000350> <Unable to create a server socket on Channel Default for: 172.17.2.201, port: 7705. java.net.BindException: Cannot assign requested address Perhaps the address 172.17.2.201 is incorrect or another process is using port 7705.>
<13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <Security> <BEA-090085> <Server failed to bind to the configured port. The port may already be used by another process.>
<13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: Server failed to bind to the requested port. See preceeding log message for details.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.server.ServerLifecycleException: Server failed to bind to the requested port. See preceeding log message for details.'
Reason: Server failed to bind to the requested port. See preceeding log message for details.
***************************************************************************Hi
i am also facing the same problem.kindly reply for th solution if you got.
D:\bea1\user_projects_cluster\mydomain>startManagedWebLogic server2 10.16.96.21:
7001
D:\bea1\user_projects_cluster\mydomain>echo off
CLASSPATH=d:\bea1\jdk131_03\lib\tools.jar;d:\bea1\weblogic700\server\lib\weblogi
c_sp.jar;d:\bea1\weblogic700\server\lib\weblogic.jar;F:\bea\weblogic81\server\li
b;D:\;c:\
PATH=.;d:\bea1\weblogic700\server\bin;d:\bea1\jdk131_03\bin;E:\oracle\product\10
.2.0\client_1\bin;C:\Program Files\Common Files\NetSarang;C:\WINDOWS\system32;C:
\WINDOWS;C:\WINDOWS\System32\Wbem;F:\bea\jdk142_05\bin;C:\PROGRA~1\IBM\CLIENT~1;
C:\PROGRA~1\IBM\CLIENT~1\Shared;C:\PROGRA~1\IBM\CLIENT~1\Emulator;
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea1\user_projects_cluster\mydomain>"d:\bea1\jdk131_03\bin\java" -hotspot -Xm
s32m -Xmx200m -Dweblogic.security.SSL.trustedCAKeyStore=d:\bea1\weblogic700\serv
er\lib\cacerts -Dweblogic.Name="server2" -Dbea.home="d:\bea1" -Dweblogic.managem
ent.username= -Dweblogic.management.password= -Dweblogic.management.server="10.1
6.96.21:7001" -Dweblogic.ProductionModeEnabled= -Djava.security.policy="d:\bea1\
weblogic700\server\lib\weblogic.policy" weblogic.Server
<Sep 20, 2007 1:47:13 PM IST> <Info> <Security> <090065> <Getting boot identity
from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
Starting WebLogic Server...
Connecting to http://10.16.96.21:7001...
<Sep 20, 2007 1:47:25 PM IST> <Notice> <Security> <090082> <Security initializin
g using realm myrealm.>
<Sep 20, 2007 1:47:25 PM IST> <Notice> <WebLogicServer> <000328> <Starting WebLo
gic Managed Server "server2" for domain "mydomain">
Starting Cluster Service...
<Sep 20, 2007 1:47:46 PM IST> <Notice> <Cluster> <000138> <Listening for announc
ements from cluster mycluster on 237.0.0.1:7777>
<Sep 20, 2007 1:47:46 PM IST> <Notice> <Cluster> <000133> <Waiting to synchroniz
e with other running members of mycluster>
<Sep 20, 2007 1:48:16 PM IST> <Notice> <Cluster> <000134> <Discovered and synchr
onized with 1 other running members of mycluster>
<Sep 20, 2007 1:48:17 PM IST> <Emergency> <WebLogicServer> <000350> <Unable to c
reate a server socket on Channel Default for: 10.16.96.24/10.16.96.24, port: 900
1. java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
address 10.16.96.24/10.16.96.24 is incorrect or another process is using port 9
001.>
<Sep 20, 2007 1:48:18 PM IST> <Emergency> <Security> <090085> <Server failed to
bind to any port such that it is not reachable from the console.>
<Sep 20, 2007 1:48:18 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to i
nitialize the server: Fatal initialization exception>
The WebLogic Server did not start up properly.
Reason: Fatal initialization exception
D:\bea1\user_projects_cluster\mydomain>goto finish
D:\bea1\user_projects_cluster\mydomain>ENDLOCAL
D:\bea1\user_projects_cluster\mydomain>ENDLOCAL
D:\bea1\user_projects_cluster\mydomain> -
I have Oracle 10.2 installed on Mac OS X 10.5. The database was working at one point (I didn't use it much) but now I'm having trouble starting it.
First I log in as the Oracle user:
su - oracle
Then I start the listener and it appears to start up correctly:
localhost:~ oracle$ lsnrctl start
LSNRCTL for MacOS X Server: Version 10.2.0.4.0 - Production on 24-SEP-2009 11:17:01
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /Users/oracle/oracle/product/10.2.0_db_1/bin/tnslsnr: please wait...
TNSLSNR for MacOS X Server: Version 10.2.0.4.0 - Production
System parameter file is /Users/oracle/oracle/product/10.2.0_db_1/network/admin/listener.ora
Log messages written to /Users/oracle/oracle/product/10.2.0_db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for MacOS X Server: Version 10.2.0.4.0 - Production
Start Date 24-SEP-2009 11:17:01
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /Users/oracle/oracle/product/10.2.0_db_1/network/admin/listener.ora
Listener Log File /Users/oracle/oracle/product/10.2.0_db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Then I log into SQL Plus and try to start the database and it fails with the message shown:
localhost:~ oracle$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Sep 24 11:17:15 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/Users/oracle/oracle/product/10.2.0_db_1/dbs/initXE.ora'
The SID of my database is ORCL, not XE. I'm not sure where the XE in "initXE.ora" comes from, and I'm not sure if that's part of the problem. When I look in the /Users/oracle/oracle/product/10.2.0_db_1/dbs/ directory this is what is there:
localhost:~ oracle$ cd /Users/oracle/oracle/product/10.2.0_db_1/dbs/
localhost:dbs oracle$ ls
alert_ORCL.log init.ora lkORCL spfileorcl.ora
hc_orcl.dat initdw.ora orapworcl sqlnet.log
localhost:dbs oracle$
So apparently there is no initXE.ora file.
h1. My Question:
Why is it looking for initXE.ora, and how can I fix it? Like I said I had this database working before (SID or ORCL) so I don't know what changed.
h3. Thank you!!!!!Follow these steps:
startup pfile='<pfile location of initORCL.ora>';
then logging as SYSDBA
create spfile from pfile;
Check the spfile in $ORACLE_HOME/dbs/ directory.
then shutdown the database and startup the database.
Don't forget to export the ORACLE_HOME,ORACLE_SID,PATH environment variables.
Regards
Asif Kabir -
Hello all,
I'm having trouble starting Photoshop Album Starter Edition v3.2 on a WinXP SP2 machine.
When I double click the icon, I get the splash screen, then it just freezes. In the fine print near the lower left hand corner, the last thing it gets to is "Initializing Model".
I've uninstalled, rebooted, reinstalled, still same issue.
I found some old thread suggesting repairing the MDAC component on the machine, which I did, then rebooted and tried again. Still no fix. I've also seen some references to a log file that may give additional information, but don't know where that log file is.
Anyone else had this issue and fixed it? Anyone have any additional suggestions I can try?
Thanks!I had the same problem. Figuring the uninstall wasn't removing everything, I did some exploring. By checking the registry, I found that the Adobe Photoshop Album SE was pointing to a directory where the catalog was being stored and maintained. These files were not deleted upon an uninstall and nor were they overwritten (even during a repair). Consequently, upon a new install, the program would attempt to load the original catalog file, which I deduced was corrupt, causing the program to lock up.
To fix the problem (Windows XP), I did the following:
Navigate to the directory, C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Album. Delete all of the files and subdirectories. It should be noted that Application Data is a hidden file/subdirectory. To view hidden files, do the following from Windows Explorer (the window that opens when you view directory contents/files): Select Tools, Folder Options and then the View tab. Check the radial button by Show hidden files and folders. Select Apply to All Folders and then select OK.
Install Adobe Photoshop Album SE again. If you still have the program installed, just select "Repair" on the reinstall.
Open Adobe Photoshop Album SE. Cancel the opening dialog screen which asks you to search directories for pictures. Select the File tab (upper left). Select Get Photos from the drop down menu, then From Files and Folders. Browse to the main directory where you have stored your photos. Check the box Get Photos from Subfolders, then select Get Photos. You may have to repeat this several times depending on where you stored all of your pictures. This process rebuilds your catalog file. Hopefully, this will solve your problem.
Chris L. -
I have word, iTunes, and other application that starts automatically when I start my laptop and how can i change start up options?
Go to System Preferences / Accounts - Login Items.
In order to make changes, click the lock icon bottom left corner of the pane. You may be prompted for your admin password.
Select the apps you don't want to launch on startup then click - (minus).
Maybe you are looking for
-
Hi people, I need your help!! I'm using Aperture 3.5.1 now, when I inport photo from somewhere else in to the library, everthing look good. But if I delete the original folders before I quit Aperture, the photos I just saw into the library will disap
-
My current system is OS X 10.4.11 and I need a 10.5 to update my iPhone, where can I download the correct 10.5 update?
-
I am trying to create a load rule that creates a shared member at a different generation. I looked at the dbag and it mentioned using the Parent/Child method with "Do Not Share" unchecked. But during testing, it moves the member instead of creating a
-
Entertaining CD found...
We are clearing out OLD software and I came across this disc.. So HR approved.... LOL This topic first appeared in the Spiceworks Community
-
Hi,<br><br> I am currently cleaning up my Oracle Database (Oracle 10g XE) filled with approximately 3000 articles. In the body of these articles some HTML-code such as img - tags etc. is placed.<br> I wrote a little script to clean this up. But when