Trouble starting touchsmart, startup repair 3 times before start, getting error 100c

i have touchsmart iq500 series, hard drive crashed, was replaced, will not start correctly, have to perform startup repair 3 or 4 times before it will start and reads error 100c

As an addition to this problem, I have downloaded 'SEAGATE Tools' and performed tests on HDD
SMART test - PASS
Short DST (Disk Status Test) -FAIL
Ran Windows error correction on drive to fix errors and bad sectors, found 1 corrupt sector (index.dat)
then
Short DST - PASS
Long DST - FAIL
It's looking more likely a Hard Disk Fault, but notebook worked fine last night. It's just the intermittent random nature of the fault that is worrying me.
Toshiba, Please Help Me.

Similar Messages

It seems that every time I update Firefox, Firefox sync starts getting errors every time it tries to sync.

I have an hTC Mecha (Thunderbolt) running Firefox for Android, two partitions on one laptop both using Firefox as well as a desktop with two partitions both of which also use Firefox. I'm not sure how I fixed it / what fixed this issue last time, but eventually it worked perfect with the update to Fx 4. However, now that I've updated my platforms to 5.x, sync has started getting errors again. I'm not sure if it actually prevents the sync from happening. Actually, I have reason to believe the sync still works most of the time, but the errors are starting to really annoy me.
Let me know if there's any other information you need.
All the best,
-HG

What Firewall do you use? It's possible it is blocking Firefox from accessing the internet when it updates. Try to read [[Configure firewalls so that Firefox can access the Internet]] and [[Firefox can't load websites but other browsers can]]

When attempting a restore from Time Machine I get error code -8004. What is this and how can I correct it? Thanks

when attempting a restore from Time Machine I get error code -8004. What is this and how can I correct it? I use OX 10.9.3
Thanks

Run it in compatibility mode and input the credentials.
Mylenium

When firefox starts get error XUL Runner platform

installed 6.0.2 on windows 7 version kb2607712 but when firefox starts get error XUL Runner platform version 6.0.1 is not compatible with mivesrion >=6.0.2 maxversion >=6.0.2'. have uninstalled and downloaded and re-installed but same problem occurs.. after this firefox wont start at all.

Download latest Firefox version using one of these links:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/central/
* http://www.mozilla.com/en-US/firefox/fx/
* http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox
* https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
* DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
Install Firefox using the downloaded & saved Firefox installer file
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working.

After a full restore from Time Machine, I get "error code -6584" when trying to go into TM.

I took our iMac in, at the direction of Apple, to have the hard drive replaced. When we got it back, I restored from Time Machine (on Time Capsule). One file on the desktop, a spreadsheet file, has reverted to a version five months old, with the loss of considerable data, so I don't know which files I can now trust. Also, when I try to go into Time Machine, I get "error code -6584" and am unable to access my backups
This is potentially very very bad. What can I do?

Solved:
sudo chflags 0 /Volumes/"FCP Time Machine BU"
sudo chown 0:80 /Volumes/"FCP Time Machine BU"
sudo chmod 775 /Volumes/"FCP Time Machine BU"
sudo chmod -N /Volumes/"FCP Time Machine BU"

HT1689 error message when i connect my ipod 'the software for this ipod is not installed correctly. Please reinstall'. I have reinstalled 3 times and still get error message. Any ideas?

I have the same error message appearing for all my apple products. ipad,ipod,iphone and ipod touch. I have reinstalled the itunes software 3 times but still the error message appears and Im unable to download my new purchases or updates playlists. Its really annoying!

Did you:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?

I keep getting error code 2330 while trying to update my itunes. I'm not able to udate, repair or uninstall., I keep getting error code 2330 while trying to update my itunes. I'm not able to udate, repair or uninstall.

I'm getting error code 2330 when I try to update my itunes. I'm not able to update, repair or uninstall!!!!

Hi I was having the same problem using ADE 2.0.
I contacted the LiveChat support (link button did not show when using Firefox 31), which gave me this link. http://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
After I edited the Registry and then restarted ADE I was able to ReAuthorize my machine. Hope this works for you.

Just started getting error messages: "error in trying to open this file, access denied"

Can anyone help? Just started to get error messages: "error in trying to open this file, access denied" This ha-ppens when trying to open PDF attachemnts to e-mail, something we have been doing for years. No new softare had been loaded recently so I can't explain what is happening. Anyone with any insight in to this situation?

What OS and Adobe Reader version are you using. Also what e-mail application are you using.

Suddenly started getting error: Unable to start program 'DTS' when try to execute SSIS Package

Me and my team member suddenly started getting following error when try to execute SSIS Package in SSDT (VS 2010)
I searched everywhere but virtually no information available about this Error. Anyone has suggestion on how to fix this error?
NOTE: Tried to execute package from command line and it works...
Error starting debugging.
ADDITIONAL INFORMATION:
Unable to start program 'DTS'.
Operation not supported. Unknown error: 0x80040038. (Microsoft Visual Studio Debugger)
Thanks,
Nayan
<a href="http://binaryworld.net/blogs"> Visit My Blog</a>

Hi Nayan,
According to your description, the SSIS package works fine when you execute it with command line, when you execute it in SSDT, you got the error message: Unable to start program 'DTS'.
To troubleshoot the problem, I would suggest you to upgrade SSDT to latest patch. Please refer to the following steps:
Download and install the latest Microsoft SQL Server Service Pack.
Cumulative Update package SQL Server Service Pack.
Download and install Microsoft Visual Studio 2010 Feature Pack 2.
For more information about Visual Studio 2010 Feature Packs, please refer to the following document:
https://msdn.microsoft.com/en-us/vstudio/ff655021.aspx
If the problem remain unresolved, i would appreciate it if you could give us detailed information about the error, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Having trouble with the Check Out (Registration - Buy) template - keep getting error message!

Hello!
Hoping somone can help me with this. I've been struggling for a while and must get this finished. I am using BC ecommerce and PayPal standard. I have set up my item, templates, etc. I'm testing the function and can get through until the checkout. When I try to checkout, I get an error message that says:
"ERROR: You have deleted your web form. Please login to the Admin panel of your website and remove the previously submitted form from the web page you last visited. You will need to recreate this web form by going to Modules -> Webforms. After recreating simply insert this new web form into the web page and your web form should work properly."
I edited the Registration - Buy template to only include PayPal as the payment method (though I don't see how this form functions).
I followed the instructions on the kb site to set up PP standard (PDT token and all that) and have set that up in the gateway section.
I can get to the item, add it to the cart, get to the cart, checkout button brings me to the checkout page, but then stuck.
I'd appreciate any help you can offer as I'm behind on this now. Thank you

Thank you for your quick reply Liam! You know, I checked the web forms list when I got that error message and the form isn't there. I was having trouble the other day when another of my forms kept getting deleted.
Sorry if this is a stupid question (I'm a BC newbie) but I want to be sure so I can get this project finished... The proper workflow would be to create this form myself in Web Forms then insert it into the Registration - Buy template using the modules toolbox?
Thanks to you I may get this done on time still... if my PayPal set up works

TS1424 Has anyone encountered trouble transferring rented films to their iPhone? I get error message "iTunes could not copy [film name] to the iPhone because the file could not be written"

I have dowloaded a film to rent. Downloads to iTunes without problem. However it does not transfer to my iPhone.
At first it appeared on iTunes as though it should be on my phone (it definately wasn't).
Apple Support sent me film to download again.
Tried to transfer it again tonight and the error message I get is: "iTunes could not copy [film title]Spy to the iPhone because the file could not be written"
Can anyone help ASAP

Two possibilities come to mind.
Check your source hard drive for errors, right-click on the drive holding the library, click Properties, tools, check for errors, scan for and attempt recovery of bad sectors...
Or...
Repair Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
If it won't let you change the permissions use the Owner tab to take ownership from an account with administrator privileges.
tt2

I am having trouble uploading pics to a forum profile.I keep getting 'Error #2038' message after it says the pic was uploaded.

I am a member on a web group. I have repeatedly tried to upload photos to my profile on the site, but when it says the photo was uploaded successfully, I get an error message, Error #2038. It's not clear whether the error is on the web page or on my end. This is not the first time this sort of thing has happened. My room mate is a member of the same group, and has no difficulties on his computer, so it may be on my end.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

IE prompts credentials after some time and we get error rsHttpRuntimeClientDisconnectionError

Hi all,
Windows Server 2012
Reporting Services 2012 SP2
Internet Explorer 8
After some time running a report the end user is asked for his credentials again with the authentication prompt.
In the ExecutionLog we see the Client (IE) has its connection disconnected =
rsHttpRuntimeClientDisconnectionError
The server parameter are attached:
We appreciate any clue.
Thanks,
Alex Berenguer
Alex Berenguer

Hi Alex,
Per my understanding that you are running the report for sometime an then IE prompt for credential and you to this kind of error, right?
Based on my research, the "rsHttpRuntimeClientDisconnectionError" error may occur if:
Reporting Services creates the report and then goes to send it back to the client
Reporting Services finds out that the connection has been closed and responds with the disconnection error.
To resolve the issue, we can try to modify the TCP profile applied to the VIP.
Additionally, the issue may also occur due to a RESET coming from something between Report Server and the custom application. For example, an F5 NLB times these connections out on the either an HTTP or TCP level.
If your problem still exists, please also check if you will got the same problem on the other browser(firefox)，you can also provide us more details information about the
TimeDataRetrieval,TimeProcessing,TimeRendering in the ExecutionLog table.
Similar thread for your reference:
ssrs Report taking to much time to load
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

HT3275 trying to back up on time machine and get error message saying ... sparse bundle is already in use -can't complete backup

sparse bundle already in use-can't complete backup

On your iMac....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click on the Base Station menu at the upper most top of the screen up where the File, Help, etc menus reside
Click on Restart
Wait a few minutes and try another backup

Upgraded my 2010 macbook pro to mountain lion, unable to complete time machine backup using time capsule. Getting error 112

Upgraded macbook pro to mountain lion, get the following message
"the backup disk image "......." could not be accessed (error 112)
I've tried many of the suggestions from other discussion threads, still unable to get anything to work. Have 4 other computers backing up to the same time capsule, all of them are functioning normally, however they are not upgraded to mountain lion.
Suggestions?

This simple procedure will clear your Time Machine settings, including your exclusion list. If you have a long exclusion list that can't be recreated easily, you may prefer a more complicated procedure that preserves the exclusion list. In that case, ask for instructions. Otherwise, do as follows.
Triple-click the line below to select it:
/Library/Preferences/com.apple.TimeMachine.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Copy it to the Desktop. Then move it (the original, not the copy) to the Trash. You'll be prompted for your administrator password. Reboot, recreate your settings in the Time Machine preference pane, and run a backup to test. If TM now performs as expected, delete the file you copied to the Desktop.

Trouble starting touchsmart, startup repair 3 times before start, getting error 100c

Similar Messages

Maybe you are looking for