Trouble Syncing Roland TR-606 with Logic Pro

Hello.
I had this working before and I dont know what went wrong.
The setup is like this Logic sending MIDI Clock > Midisport Interface > Kenton Pro Solo (set to send Sync24 out of the 'Through' port > Roland 606's MIDI sync input.
When I start and stop from Logic the 606 starts and stops accordingly. Also, when I change the tempo from within Logic the tempo on the 606 also changes HOWEVER the speed that the 606 is running at is always faster than the metronome in logic - It doesn't sync. Is this a problem with the 606?
What am I doing wrong. Would be very grateful for any advice.
Thanks.

More info: From the Logic 'MIDI Sync preferences' I have set it to send MIDI Clock and from the 'MIDI Sync project settings' I am sending it to the correct port on my interface. The MIDI clock is received by the Roland however fails to sync with it properly..

Similar Messages

Sync Rebirth 2.0 with Logic Pro 7

I'm running Logic Pro 7 on a Powerbook G4 with OS 10.3.9. I just downloaded the now free Rebirth 2.0, which only runs in OS 9. Is there any way to slave Rebirth to Logic? Any way to sync midi and audio between OS 9 and OSX?
Hope so...
Any help would be great.

nope

Using a Roland TD-7 with Logic Pro

Hello folks, today I come to you with a MIDI problem.
What happens is that I connect my RTD-7 module to a MIDI-to-USB cable and then connect it right to my iMac. I open Logic and choose any drumkit but I don't hear any sounds, Logic is not getting any MIDI signal.
It's weird, because I checked with Audio MIDI Setup, under the MIDI window and it is there as "USB2.0-MIDI", so I'm pretty clueless right now.
Any help will be appreciated!
Thanks!

Hi JacksonFroAR,
Thanks for visiting Apple Support Communities.
See the Logic Pro X User Guide for information on storing your project assets on an external drive:
http://support.apple.com/manuals/#professionalsoftware
Manage project assets (pg. 155)
When you create or save a project, you can choose whether the assets you use in your project are saved in the project, or referenced from their location on your computer or a connected storage device.
Cheers,
Jeremy

DVD-A surround with Logic pro... Troubles

Hi everyone
I'm producing and mixing an album with logic pro 8 in surround mode 5.1
In the window bounce, I can create a DVD-A... Cool, but I cannot read and test it with the dvd player include in my iMac.
I want to create a DVD-A who can be read on all DVD players and control it before duplication for the sale.
I've tried to import the surround files into Waveburner but it's impossible, only 2 channels files are accepted.
How can I do ?
Is someone can help me ?
Thanks a lot

Phil Journy wrote:
Hi everyone
I'm producing and mixing an album with logic pro 8 in surround mode 5.1
In the window bounce, I can create a DVD-A... Cool, but I cannot read and test it with the dvd player include in my iMac.
I want to create a DVD-A who can be read on all DVD players and control it before duplication for the sale.
I've tried to import the surround files into Waveburner but it's impossible, only 2 channels files are accepted.
How can I do ?
Is someone can help me ?
Thanks a lot
Hi. I believe DVD-A is still not a free protocol, and DVD-A players are rare. and though Logic can make DVD-A, there is no program for the Mac that can actually play them. I'll try a little search, there has been a comprehensive thread on exactly this topic - though more than a year ago, if I remember correctly...
(off to search...)
+To be continued...+

Which 61 key midi keyboards work with Logic Pro X (10)? M-Audio, Novation, Akai, Roland???

Hi. I'm new to this community but would really appreciate some help.
I'm struggling to find a 61 key midi keyboard which works properly with Logic Pro X.
I was looking into getting either the M-Audio Axiom 61 or Novation Impulse 61 but all I can find on google etc. is people saying they don't work properly.
Has anybody got a 61 key which works seamlessly with Pro X?
Any help would be much appreciated.
Thanks.

To "The Art Of Sound"
Hi. I doing next.
1. I create new project
2. I select Yamaha Grand Piano
3. I play something in "live" mode. All is ok
4. I play something in "Rec" mode. All is ok
5. I record second track with the same instrument, with Yamaha Grand Piano. All is ok
6. I record third track with Yamaha Grand Piano. All is ok again.
7. Now I muting first or second track and... third track plays wrong notes! I unmute first track, but third track still to play wrong notes! Why???
Ok. I continue experiment with created project. I have three Yamaha grand Piano tracks and I creating new software instrument and assing Hovering Machine to it. I try to play in "live" mode something. And I get interesting effect. If I play short notes (sixteens, for example), I can play for one minute without problem. And Logic Pro X starts to play wrong notes after this time delay.
If I start to press chord notes without breaking, Logic Pro X plays for 15-30 secounds normally and starts to play wrong notes them.
Well. I turn off all plugins and effects from instruments. But Logic Pro X countinues to play wrong notes!
I experimented with NI Kontakt 5. Kontakt plays wrong notes!
I experimented with LUSH-101 plugin and minimoog. This two instruments play correct notes always!!! WHY????
Why some instruments play wrong notes and other instruments play correct notes in the same project?
I wrote wrong in my previous post. I got this problem with Logic Pro X 10.0.3 update.
Actually I have serious problem now. I opened projects created in Logic Pro X early and I have this problem in ALL projects. This's commercial projects and my partners asked me already about release date... What must I answer?

RECORDING AUDIO through ROLAND FANTOM G8 on LOGIC PRO

Guys, I have been struggling for days, with such a ridiculously simple issue. I need to be able to record audio through my mic which is connected through my Roland Fantom G8 on one audio track in Logic, while simultaneously hearing the beat on another audio track through my computer's built-in output. Garageband does this automatically.
When I set the core audio input to the Roland Fantom, I can record just fine, but then I cannot hear the beat play through the computer's output. If I set the core audio input to built-in input, then I can hear the beat through the computer, but Logic does not detect my mic.
The program detects the Roland without me setting the core audio input to Roland Fantom, as I can record sounds on a midi track while simultaneously hearing the beat on an audio track. So why can I not record my vocals through the Roland on one audio track and simultaneously hear the beat on another audio track through the computer's output?
Somebody please let me know ASAP because I need to get this album of mine under way. It would be GREATLY appreciated.

It's quite common - people who are used to using entry-level tools don't necessarily realise that the software is designed to do a certain amount of hand-holding.
When moving to a professional program, people somehow think that the new program will do everything the entry-level one did and more, but everything will be even easier.
However, professional software is designed specifically to not do any hand-holding. It's assumed that people using professional software have a certain amount of skills. The software is designed to help them realise what they want, rather than constrain them in "easy-mode".
In short, it doesn't hold your hand, it doesn't tell you when to go to bed, and it won't look all dissapproving when you turn up the following morning with a hangover and half your clothes missing.
The trouble with having the pro stuff so accessible is a lot of people who are really at the level of using entry-level programs are using the pro stuff simply because they can - and then they get frustrated because these programs require some knowledge to use effectively.
Sit someone in front of Maya or After Effects (as an example) who has very little knowledge or experience, and they won't get far. And the software is not going to try to educate them.
And we see this with Logic Pro 8 like never before, as a lot of new users have come on board, whether because the price point or value is so attractive, or because LP8 is accessible in a way LP7 and before wasn't.
(Note, this is a general thing, not necessarily applied to the OP here...)

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

Can I use a VS-700C control surface with Logic Pro?

Hi,
Does anybody know if I can use a Roland VS-700C control surface and/or VS-700R audio interface with Logic Pro?
Cheers,
Craig

If it supports the Makie protocol, it might work... but I wouldn't purchase one on that basis without trying it first.

Control external MIDI synth with Logic Pro X

I purchaced Logic Pro X to use it as a MIDI-sequencer for my external stagepiano: the Roland RD-700sx including two expansion boards (SRX-04 and SRX-10). I want to make records to create my own music. Before I record it as audio I want to record it as MIDI, because in that form it's easier to make adjustments.
The RD-700sx is GM-compatible, though the better quality sounds are stored in certain banks, which one can select bij entering a specific number to the MIDI control assignments MSB and LSB. For example: to select the Superior Grand Piano, MSB = 87, LSB = 64 and PC (program change) = 1. To select the 60's E. Piano 2, MSB = 87, LSB = 65 and PC = 5. To select the first tone wheel organ MSB = 112, LSB = 0 and PC = 1. To select the SX Rock Kit (drums) MSB = 86, LSB = 72 and PC = 2. And to select the staccato cello on my expansion board MSB = 93, LSB = 3 and PC = 79.
I spent a lot of time searching and asking on the internet how to select the desired sounds, but I don't know how to do it. So far I know you have to create a multitimbral MIDI environment and on each of the 16 channels you can assign a bank and enter the values of MSB and LSB. I found this article: Logic Pro/Express 9: Defining Custom Bank Messages - Apple Support
I understand a part of it, though I have too little experience with Logic Pro X to get the job done. Can someone please explain it to me from the beginning to the end? You would help me a lot!!!

did you do a firmware update on 003 ?

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Questions about Novation Remote 25SL integration with Logic Pro 8

Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
- Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
- Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
- I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
Thanks in advance for all your feedback.
Message was edited by: Jason Lixfeld

Follow-up research:
Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
1. disconnect the alphatrack.
2. launch Logic and then turn on the ReMOTE SL.
3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

M-Audio 61ES not playing nicely with Logic Pro X!

The 61ES has been doing some really wacky things: I opened it up out of the box for the first time last night and right off the bat the middle octave of notes on the controller were very quiet compared to the high and low notes on the board. It was like the velocity wasn't working properly on those keys or something. The sounds worked fine in Logic when I pencilled them in. But I was too tired to mess around with it more, so went to bed and figured I'd deal with it in the morning. So this morning, the middle octave of keys seems fine, but the middle G just won't play at all. And many of the notes aren't tracking, or playing- especially during fast passages.
I pulled up Pro Tools 10 and the 61ES worked fine. So something is going on between the controller and Logic. Anyone have any ideas?
I'm running it on a MacBook Pro with 10.8.5. And the latest version of Logic Pro X- 10.0.6. Thanks for any advice!

Try this....
http://www.noterepeat.com/products/m-audio/usb-midi-controllers/axiom-air-series /269-m-audio-axiom-air-series-setup-with-logic-pro-x
Also make sure you have installed the latest drivers for the Air and Logic...
Axiom AIR Mini 32 Hyper Control Logic v1.0.2 (Mac)
Other that that.. Id contact M-Audio support for further help and advice
http://www.m-audio.com/support

Can I connect every USB-Audiointerface with Logic Pro?

Hello there,
please forgive me, if my english isn't so well.
So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface.
But - Can I simply connect a USB-Audiointerface with Logic Pro?
So, hope you understand me,
Best wishes, "toasbrot_55" (sorry for that name, i don't know when I did chosen this name)

All Mac OS compatible audio interfaces work with Logic, and almost all USB interfaces are Mac compatible. So it depends on which interface you have (make and model), and which Mac OS version you use.

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Trouble Syncing Roland TR-606 with Logic Pro

Similar Messages

Maybe you are looking for