Trouble to install the software
My imac is Yosemite 10.10.3, 16GB HD, Intel core i7, NVIDIA GT 750. I did the download FCX trial, but I can't install the software.This is error message when I try install "FinalCutProTrial10.1.4. erro-4960"
That doesn't look like the right link. Are you going there from this page?
Similar Messages
-
I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?
Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.
-
Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit
Download the Brother Mountain Lion drivers here.
-
Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/ -
My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?
You already have the software installed that you need if you have 10.8.2.
If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
Power up the Express for a full minute
Hold in the reset button on the Express for 7-8 seconds and release
Allow a full minute for the Express to restart
Click the AirPort icon at the top of the Mac's screen
Look for a heading of New AirPort Base Station
Just below that, click on AirPort Express
What happens? -
i used my wifi to download ios 8 after like 5 hours it finished and then it let me install, while installing the software it shutdown and everytime i try to open it it shows up the itunes and the usp cable logo... when i plug in the usp cable it says in itunes( ipad recovery mode) and when i press restore it start downloading the ios software again...... wats tht and what i can do pls help. thnx
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
How many computers can I install the software on
how many computers can I install the software on?
Yes, you can use Creative Cloud desktop applications on two computers at once, regardless of operating system, for the individual associated with the Creative Cloud membership.
Please refer the below link : http://www.adobe.com/products/creativecloud/faq.html -
Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server???
I am using mac osx 10.8 and now cant get print software for epson R2000 printer.After system update, my Epson Stylus SX 535WD was ''gone''. I tried in vain to add it as an IP printer (got the IP-address from the printer). The printer model is correctly recognized, software download starts -- but then the "software ... is not currently available..."
Resetting the printing system did not help. Downloading Epson Printer Drivers v2.15.1 from here
did not help either, downloading Epson Printer Drivers.
In the end, I re-installed the printer software from the original CDs. After that the printer showed up as a Bonjour Printer, and I could add it without problem.
But note: although the printer is installed now and working properly, I still get the old error message (...software ..not available...) if I try to add the printer as an IP printer !? -
I keep recieving this message for months since I upgraded to the Retina MacBook Pro, "Can't install the software for the Brother HL-4070CDW series because it is not currently available from the Software Update server." I am unable to install my Brother HL-4070CDW Printer. I have manually downloaded all the software directly from Brother as well as the Brother Printer Drivers from Apple, but still can not install
That means you go here:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
to get the latest HP drivers. -
I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.
I have that problem too. There's many other discussion threads as well. Either Apple doesn't realize they have a problem, or they do and simply don't care. Either way, not good.
There is a workaround that I'm going to try next. Go to this webpage:
http://support.apple.com/kb/HT5634
Scroll down to the middle of the webpage. Hit "Expand All". Now, search the webpage for the Apple product name of your computer. It should be something like "MacBook Pro, 17-inch, Early 2008". If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit). Hopefully you'll find a "4" or "5" there. Click on that number, to go to the download page for the drivers that you need. If you just see an empty box there, then you're out of luck....
Hopefully there will be drivers. Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32). Use Disk Utility to format your USB stick if necessary. Now, you have the drivers you should have gotten from the Boot Camp Assistant download. You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
Hope it works!
Josh -
I use a Macbook Pro 13" mid 2010 on Mavericks and I've tried using the Boot Camp assistant to download support software for Windows 7. This gives the error "Can't install the software because it is not currently available from the Software Update server."
Further, I tried to separately download Boot Camp 4 and 5. When I do this and try to install from Windows 7, it says that this version of Boot Camp is not for this computer and doesn't install. The result is that I have Windows 7 working and installed, but am unable to use the trackpad to rightclick, brightness settings, etc.
Please help!
ThanksYou need to run Bootcamp Assistant and select only the menu item to download the Windows Support Software. Follow the instructions. The download servers are extremely slow therefore it may take several hours to get the download.
-
Trying to add Windows 7 with boot camp to a Macbook Pro
HI
while i download windows support
that time this message comeing"can't install the software because it is not currently available from the software update server. boot camp"
i can't use apple keyboard and multi touch keyboard in windows.
pls help me -
I am trying to install the software drivers for Windows 7 Home using Boot Camp 4 Assistant. I receive the following message: "Can't install software because it is not currently available from the Software Update server." Why is this happening?
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/ -
hi there i was trying to install windows via bootcamp and when i was trying to download the support software i had an error of "Can't install the software because it is not currently available from the Software Update server." i am using a 15" 2009 macbook pro and the bootcamp version is 5.1.0 (473). can anyone help? thanks in advanced
Instead of downloading the Windows support software from Boot Camp Assistant, download it from the Apple website. Mid 2009 and older MacBooks Pro only support this Windows support software version > http://support.apple.com/kb/DL1630 This version allows you to install a 32-bit or 64-bit Windows 7 version.
Follow Apple's steps to install Windows on your computer > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf -
Error: Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.
OS 10.9.1
iMac 27-inch, Late 2009
Boot Camp Assistant Version 5.1.0 (473)
Every time I run this I get the above error after I hit "Continue" on the "Save Windows Support Software" page and subsequently hit "Download Windows 7 Support Software."
How do I successfully install 64 bit WIndows 7 on my iMac?
Thank you!Waited a month and tried again with the same result. What gives? Does Apple no longer support Bootcamp with Windows 7? Do they not read these posts and help out customers? If Apple doesn't care and won't help, can anyone else suggest something? My large company does not like Apple and barely supports those of us who buck the trend and buy Macs. If I have to buy a PC to support their software to work from home this only gives them more "ammunition" to decline to support Macs. Any advice anyone can give would be greatly appreciated!
Maybe you are looking for
-
Why can't we have a single point of contact who de...
Three weeks ago our house was hit by lightning and our broadband connection went on the blitz (a Linnit technical term). The telephone stopped working. I did an on-line check and the connection registered a fault. The on-line system logged the fault
-
Hi SAP Gurus, Is there any transaction to get the list of POs, for which no GR has been made yet. Means: Ordered qty = Still to deliver qty Or, in other words, Delivered qty = 0 Regards,
-
Hi everyone. We just updated our office package to 2010 and guess what, Standard 9 no longer works with office! Great. So we need to upgrade to X to fix this problem but... We do not want Acrobat to convert AVIs to SWF when they are embedded into a
-
How do I view images in safari?
I cannot view images or vids in my Safari browser on my iPhone. Any suggestions? Thanks..
-
Scripting the location of the scratch disk...
Hey folks, I'd like to set the location of the scratch disk in Photo shop CS3 in a javascript startup script. Does anybody know if that's possible? Thks, Will