Trouble transfering music to iPhone 5 iOS 7.0.6 from iTunes 11.1.5 on Macbook Pro Snow Leopard 10.6.8

I recently fixed my Macbook Pro and updated the software to Snow Leopard 10.6.8.  I am having trouble syncing my iPhone with iOS 7.0.6 to my iTunes which is 11.1.5.  It gets stuck on step 4 of 4 "Waiting for changes to apply."   I've reset sync services and done a lot of research about what I can do to fix the problem to no avail.  I would appreciate any help availible.
Thanks

I had the same issues, reloaded itunes, updated driver, blasted everything out, etc., did everything,  short of doing a rain dance.  I finally got it to sync by clicking the box "sync only checked songs and videos".  It also allowed me to sync books, etc.  Good Luck Bwerner25.

Similar Messages

  • HT204022 If I delete my photo stream photos off of my iPhone will they also delete from my photo stream on my MacBook Pro? If so how can I ensure that those photos are saved?

    If I delete my photo stream photos off of my iPhone will they also delete from my photo stream on my MacBook Pro? If so how can I ensure that those photos are saved?

    They will not be deleted if they have been imported to your iPhoto library.  To ensure this happens automatically, go to iPhoto>Preferences>iCloud and check Automatic Import:
    To confirm that they have been imported to your library, click on iCloud on the left sidebar of iPhoto, open your My Photo Stream album on the right, then Control-Click on your pictures.  If you see "Show in Library" in the pop-up, the picture has been imported to your library and you can safely delete it from photo stream.

  • My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard, what can i do?

    My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard (iTunes does not recognize the iPhone anymore) , what can i do?

    Try removing and reinstalling AMDS:
    http://support.apple.com/kb/HT1747
    (I requested deletion of your duplicate post.)

  • Transferring home folder from Tiger 4.11 into a MacBook Pro  w/ Leopard

    I just got word that my PB Aluminum 1.67 that was to be repaired via Apple is now
    going to be upgraded to a Apple MacBook Pro
    First of I'm (happily) shocked by this offer, and now I begin a new realm into intel technology
    MacBook Pro, and now... Leopard! Which I didn't want to install on my Aluminum PB I went only
    as far as Tiger 4.11.
    My inquiry is on transferring my back up home folder from the Aluminum Tiger 4.11 to the MacBook
    Pro using Leopard.
    Is that at all possible so I can restore my passwords, etc..into Leopard.
    I also have PhotoShop 6 and Microsoft X software, would this be a problem installing or using
    in the MacBook Pro?
    Just concern about software compatibility with this upgrade.
    appreciate feedback.. Aimee

    Check with the third-party software vendor to find out if there are any compatibility issues or if you will need to upgrade. Older software may be PPC-only. They will run on an Intel Mac through the Rosetta emulator, but upgrading to a Universal Binary version would be the better course of action.
    See:
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
    Basically the instructions you should follow are:
    1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
    2. Connect a Firewire cable between your old Mac and your new Intel Mac.
    3. Startup your old Mac in Target Disk Mode.
    4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    4. Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 3/12/2008
    Generally, there should not be any migrating problems between the Intel versions of Tiger and Leopard other than third-party software may require upgrading for compatibility.

  • MacBook pro, snow leopard, iPhone and Bluetooth PAN problems

    Short Version:
    I am having connectivity issues connecting my new MacBook Pro (MBP) to the Internet thru a Bluetooth PAN on my iPhone4. This has been working fine for a few days and then today it just stopped working responding that my iphone connection is not available, it's off, too far away or whatever. This is not the case. When I try to connect the iPhone to the MBP the iPhone is saying my MBP is not supported. I can pair the devices, but as soon as I try to connect to the Internet thru the iPhone via the MBP the connection fails.
    Long Version:
    I received a shiny new MacBook Pro only a few days ago and I am having Bluetooth Paired networking issues as of today, 2nd, March, 2011. The MacBook Pro is running Snow Leopard 10.6.4, and is brand spanking new, unmodified, factory defaults.
    The iPhone(s) I am using are iPhone 4's with iOS 4.1
    On the first day I paired the MBP with both iPhones with ease, it was so easy my grandparents could have done it. So point and click and it just worked....
    The iPhones are set up in iTunes with names similar to dave1 and dave2
    On the MBP I can select which device I want to connect to the Internet by going to the Bluetooth icon and connecting to whichever iPhone I have handy at the time. Since the plans are limited connectivity, I do load share between the two.
    Today, for no apparent reason, I have been unable to connect to my wife's phone just getting a basic "The Bluetooth network is unavailable" message telling me the iphone is out of range, not on, etc etc etc. Not true.
    No problem, I just connected to my phone instead. Occasionally I tried her phone again, but it just never worked. I eventually got her to reboot it, still no joy.
    Then, a couple of hours ago, while in the middle of reading my rss feeds, my Bluetooth connection dropped out. My phone is sitting right next to the MBP. So that's not the issue. No amount of reboots of either the MBP or the iPhone have fixed this. I have unpaired and repaired the devices (on both phones) countless times. I have removed the sim card and rebooted, I have disabled and reenabled Bluetooth on both, rebooting before doing this, and after and during, I have reset network settings. Nothing I try is working here.
    Pairing alone is an event, but here's an example of what's happening:
    I go thru the motions, the MBP shows me a number (eg, 451234) and the number is displayed on the iPhone. They see each other. The numbers are the same. Good. I click PAIR on the iPhone and MBP and everything appears good. But then if I go to connect to the iphone on the MBP I get the out of range error.
    I have made both discoverable, and tried to connect to the MBP from the iphone, and got a different error message altogether: Connection Unsuccessful - "{insert my name}'s MacBook Pro" is not supported. W-T-F? It was an hour ago? What has changed?
    Then, the only option on the iPhone is to "Forget Device". ok, forget it, and start again. Same same.
    Neither the iPhones nor the MBP have been upgraded or changed in anyway today, or even recently. In fact, as mentioned earlier, I was actively using the connection without any issues for a number of hours when it just stopped for no apparent reason.
    Not that these matter, but I am in Thailand (live here for the time being), I'm on the TrueMove network, which offers 3G coverage in my area (Patong Beach).
    This could easily have been filed under MacBook Pro, iPhone, OSX and possibly many other discussion headings, because the issue can be any or all of the OS, the MacBook Pro Bluetooth adapter, the iPhone Bluetooth, (iOS for that matter), or some other unforeseen conditions...
    My head is sore from pulling my hair out. I am open to any suggestions (reasonable or otherwise!)
    For further info (not that this post is long enough already, or anything, but), I thought it was interesting that the phones didn't fail at the same time, so I pulled out an old iPhone 3GS and set it up, but after pairing, the two can still not connect.
    I know its not an issue with the data plan on the iPhone since I'm here surfing now without an issue, so it's not a data problem.
    Open to ideas....
    If you've read this far and you're ever in Phuket, give me a call... I'll shout you a beer

    Ok, now I do wish I could edit....
    I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
    So, I kept playing, and playing some more...
    I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
    I didn't remove the Ethernet, Firewire or Airport Network devices.
    Now, I have done so. I REMOVED EVERYTHING
    No pairing, no network devices.
    Bluetooth was already turned off, and I rebooted.
    I turned off tethering and rebooted the iphone.
    I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
    I opened a web page, no go... d4mn, I was close...
    Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
    Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
    So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
    Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

  • "The iPhone is already synced with another iTunes library" same imac but after update Snow leopard now have this problem? HELP

    I recently just had to re-install snow leopard on my imac. Thankfully I backed up all my music and re-imported everything from my old install to this one. However, when I go to sync my iPhone 4 I get the message that reads:
    "The iPhone is already synced with another iTunes library. Do you want to erase this iPhone and synch with this iTunes library?"
    It warns that doing so will erase my current iphone and replace the contents of it with the contents in my new iTunes library.
    I manage to back up photo in iPhoto, using iTune I Back up using control click mouse and get the back up button, but when I search my computer for the backup it cannot find it anywhere!!!!I I'm afraid to sync in fear of losing all my images and app data. want all mytext and other things to be safe
    please HELP

    You are trying to do the same thing as wj talks about in his user tip: https://discussions.apple.com/docs/DOC-3141

  • Issue iPhone 3G iOS4.0.2 with iTunes 9.2.1 in MacBook Pro 15" MacOSX 10.6.4

    I have an issue to restore my iPhone 3G, iOS 4.0.2 in my MacBook Pro 15" (December 2009) with MacOSX 10.6.4.
    The "Apple" hangs at tre quarter of the process and hold here.
    What's happen?
    I resolved the problem with a restore by Windows XP, iTunes 9.2.1.
    I don't believe in it!
    I'm very angry.

    British humor? I'm American as apple pie!
    Though I have been to the UK a few times and absolutely love it!
    Good things come to those who ask nicely. Perhaps if you ask nicely and learn to control your anger (after all, we're just users here. We didn't make the phone), you might actually get assistance.
    Message was edited by: gdgmacguy

  • Macbook pro/snow leopard cannot see photos on iphone 4 ios7 and therefore cannot download

    Since installing a new hard drive, my macbook pro 2009 / snow leopard shows no photos on my iphone (when there are 147). I have not had a problem with downloading photos previously. Any help appreciated.
    Tim

    Have you synced the phone with iTunes on the Mac? Have you installed all system updates? iOS7 only works with later versions of iTunes & the OS.
    iPhoto should allow you to see the pictures & import them from the phone. The other option is 'Image Capture' application. It should be in the Applications folder.
    You may also need to unlock the passcode to show the device on the Mac.

  • Transferring videos, to which I own the rights, from my iPad back to my Macbook Pro?

    I have videos stored on my iPad, that I filmed myself, under 'Movies'. I 'VJ' using these clips using the (excellent) TouchViz app.
    The Macbook Pro that I used to make those movies died and I have no backup of the original files. I need to move those clips back to my new Macbook Pro in order to edit them. Is there an official way of doing this?
    I'm assuming that if I opt to sync my iPad I'll lose the videos as they do not currently exist on my Macbook HD. Just to reitterate; there are no copyright issues here - this is all my own work!
    Cheers

    I know very little about shooting movies and even less about editing with another app. I do know that when I shot the few videos that I have taken with my iPad, they are stored in the camera roll, that is where they are saved by default. From the camera roll, videos can be imported to the Mac using iPhoto.
    The TouchViz app is an app that you used to edit the videos? If this is the App that you are using, according to what I see in the app description, you can use File Sharing to import the movies to the Mac, which is what I suggested above.
    https://itunes.apple.com/us/app/touchviz/id486139371?mt=8
    Have you read the documentation that came with the app? There must be some instructions or support site where you can get the information that you need.
    EDIT - Read this.
    http://hexler.net/docs/touchviz-media-transfer

  • ITunes won't sync between MacBook Pro and iPhone 6

    I have a new iPhone 6 and tried to sync (by cable) my iTunes on the phone to my MacBook Pro (Snow Leopard). I get a message that the MacBook won't sync to the iPhone because the iPhone iTunes needs to be updated.  Also, in iTunes on the MacBook, the device (iPhone) is not even recognized for syncing.  I thought iTunes on the phone would be updated by syncing with the MacBook!  Any advice?  I cannot find a way to update iTunes directly on the iPhone.  One last quirk, even though the message says it couldn't sync, some songs appear on the phone!

    Opps,
    I should have also said is it a Received At ID ?
    If it is try deleting it and then re-adding it.
    10:48 PM      Monday; September 24, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and and iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Trouble deleting music off Iphone

    I trouble deleting music off iPhone and iPod through iTunes. Can't access anything on it.

    Now click on "Music" on the top left under "Library", all of your songs will appear to the right.  There is a box to the left of every song.  If it is checked, when you sync it will be transferred to your phone.  To delete a song from your phone, uncheck the box next to it.  When you have unchecked all the songs you want to delete from your phone, click on the Sync botton on the bottom right.  When your phone finishes syncing the unchecked songs should be deleted from your phone.
    To summarize: checked songs are synced to your phone when you sync, unchecked songs are deleted from your phone when you sync.
    Edit: When you are done unchecking the songs you don't want on your phone, click on the name of your phone again on the left sidebar, then click the Sync button on the bottom right.
    Message was edited by: randers4

  • HT201593 Anyone else having trouble transferring music to iPad using iTunes?

    Anyone else having trouble transferring music to iPad using iTunes?
    <Subject Edited by Host>

    For the updates you've tried logging out of your account by tapping on your id at the bottom of the Featured tab in the App Store app and then logging back in ?
    And for the purchases by 'not letting me buy music' you mean ... ? If you are getting an error message then what does it say ?

  • Transferir musica de la memoria USB a mi biblioteca itunes

    Alguien sabe como transferir musica de mi memoria USB a la biblioteca itunes? por que cuando quito la memoria y quiero escuchar la musica de esta en itunes la misma me dice que es imposicle escucharla ya que es imposible encontrar la original!

    hola, yo tengo windows 8.1 iphone 5 y el mismo problema que tu empieza a sincronizar pero cuando llega al punto 5 o se cancela la sincronizacion, se cierra itunes o nunca pasa al punto 5. no se que hacer hay otros programas para sincronizar pero perderia la opcion de poder comprimirlas al agregarlas al iphone.

  • I have an iMAC G5 PowerPC (not Intel) running10.5.8.  I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so.   Yet I can't install Snow Leopard as the G5 is not Intel.   What do I do?  How do I move music

    I have an iMAC G5 PowerPC (not Intel) running10.5.8.  I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S.     Yet I can't install Snow Leopard as the G5 is not Intel.   What do I do?  How do I move music and pics?  And keep them synced up as I purchase more? 

    Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

  • How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

    How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

    Hello, lustige luka. 
    Thank you for visiting Apple Support Communities. 
    The Personal Hotspot feature using USB  should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled.  Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue. 
    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/ht4517
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756
    Cheers,
    Jason H. 

Maybe you are looking for

  • Unable to collect 3.x data source replica in a request

    Hi, When i tried to collect a data source replica(3.x data source) in a request it is throwing an error. But when i tried to collect a data source replica which is migrated to 7.0 it is aloowing me to do. Please suggest me a solution.I want some data

  • GridControl Cell rendered as either button or combobox depending on data

    I have worked out the following code. If the data has more than one row it will return the words <MORE> in the query. If there is only one row it will return text and if there are no rows the cell is blank. The following renders and takes care of the

  • RDBMS in XML - how deep do you go?

    Everyone seems to be working one level deep in XML. In other words like in XMLSQL <mydata> <row id="1"> <element1>value1</element1> <element2>value2</element2> </row> <row id="2"> </mydata> I took the approach of: <myModel> <tableName1 id="tn1.1"> <e

  • Enprise Table Not Found?

    Hello, I am trying to use the Enprise tables in a matrix but keep getting Table Not Found error? Is there a special way for adding Enprise tables as SAPbouiCOM,DBDatasource? I also tried the table name without the "@" Appreciate any help, Mike Error

  • Oracle Text Context index keeps growing. Optimize seems not to be working

    Hi, In my application I needed to search through many varchar columns from differents tables. So I created a materialized view in which I concatenate those columns, since they exceed the 4000 characters I merged them concatenating the columns with th