Trouble trying to update OS10.2.4
I downloaded OS 10.2.6 Combo to update my OS 10.2.4. It went to my desktop and when I clicked on it to install, I got a message about nothing to mount to or something. Also an error 95 message. I trashed it all.
What should I download first to update 10.2.4?
How do I get it to install once I download it?
Flora
You will find the 10.2.6 Combo Updater here and the 10.2.8 Combo Update here.
Once you download the installer it will appear as a disk image. Double-click on the disk image to mount the image on your Desktop. When the image mounts on your Desktop you can open a Finder window on it to access the installer package. Double-clicking on the installer package will initiate the installation.
Similar Messages
-
I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .
Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new. -
I'm trying to update from OSXLion 10.7.5 to OS10.9 in order to acces pages 5.2.2. When I click "update software" i get message that no update is available My computer is from 2008. is it too old to accommodate OS 10.9?
Thanks Just figured this out when I tried to download Mavericks and got the same message .The reason i wanted to upgrade OSX was to access Pges 5.2.2 because I'm sharing a document with someone who has the latest Pages version. Any solutions? Or I'm just stuck?
-
in settings and then general i do not have the option of software update...? How do I know if I am on IOS6 I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help
stell80 wrote:
in settings and then general i do not have the option of software update...?
That is only present if you have already updated to iOS 5 or later. If you're on iOS 4 you can only update while connected to your computer's iTunes.
stell80 wrote:
How do I know if I am on IOS6
Settings/ General/ About
stell80 wrote:
I also seem to be having trouble trying to use icloud i think this is because my apple id is not in the form of an email address...? can anyone help
You can't access iCloud from your iPhone unless you're on iOS 5 or later. Otherwise, refer to this article:
http://support.apple.com/kb/HT4436 -
hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.
http://support.apple.com/kb/HT1808
-
The trouble started when I tried to update my software version....
I am still very new to all the iPods. I have a Nano that I haven't had trouble using with iTunes. Now I recently bought a Touch and am very confused using it with iTunes. From what I read I can have both the Nano and Touch on the same iTunes account. If that isn't correct please let me know.
My trouble right now started when I tried to update the software version. When I try to, a message pops up telling me there are items on there that have not been transferred to my iTunes library and that I should do that before updating. So, I went to File and tried to transfer purchases. Another message popped up telling me items purchased could not be transferred because I am not authorized for them on this computer (same computer we have always used for the Nano). So, I then went to Store and clicked Authorize this computer and got the message that it is already authorized.
Now I have no idea what to do.- Yes you can sync more than one iDevice to a single computer and iTunes library.
- Try deauthorizing and then authorizing the computer.
- You are authorizing the computer for the account(s) used on the iPod, right?
- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
I
s anyone else experiencing trouble turning thier phone on after trying to update to the ios 6.0.1? I cannot access my phone at all...Sounds like their was some corruption that occured during the update. Have you tried connecting it to iTunes in recovery mode and restoring it from backup (or to factory settings if from a backup fails)? Use the instructions in this article to walk you through placing your device in recovery mode.
iOS: Unable to update or restore
Otherwise, try DFU mode.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
I am trying to update my iPod touches and keep getting an error message saying iTunes could not back up my iPod because a session could not be started. I have followed all trouble shooting advice found on the apple website, unplugged and replugged the device, restarted my computer, etc. Any suggestions would be much appreciated. Thanks
I have the same issue, except I can't even sync.
-
I am trying to update my iphone 5 to the newest version (7.4) but it says I do not have enough space on my computer to update, though I have 8GB. Shouldbnt this be more than enough space? I have tried every trouble shooting option and get the same pop up-
Have you tried doing an over the air update on the iPhone instead?
-
Appleworks 6 will no longer open. When I have tried to update appleworks, I am getting a message saying a shared library error is preventing it from updating.
Any suggestions?Might be worth repeating the question in this forum:
AppleWorks -
Error when trying to update or download any app
I'm getting an Error when trying to update or download any app from Mac App Store
Every time I try to update xCode to version 6.2 but I get this error :
The server gave an error during download: 503 Service Unavailable.
So I tried to download a random app from the App Store but I got the same error message.
So any advices ?Hello HusseinAlBehary,
Sorry to hear your troubles updating and downloading apps from the Mac App Store. Based on when you were doing that, it looks like the Mac App Store was experiencing difficulties. It is not currently so you should be able to upgrade with out issues now. If you experience this in the future, look at the page below to start you on figuring out if it is something on your end or Apple’s end.
Apple Services, Stores, and iCloud
https://www.apple.com/support/systemstatus/
Regards,
-Norm G. -
I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??
Hello,
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1 -
How come my mini iPad is not working after trying to update apps?
My mini iPad is repeatedly showing me a black screen with a, "white apple," in the middle & then a couple of minutes later it turns off for a few minutes. Then the black screen with the, "white apple," in the middle comes back on again and then it goes black again. Sometimes the black screen would lighten and the whole pattern of these "screens" would start over again. It's been doing this for hours since I fell asleep.
This happened when I was trying to update 4-5 apps at the same time. It had trouble updating the, "Pinterest app." It failed once and I retried it and that's when my mini ipad started to not work. I can't use it at all. I never had trouble updating several apps at one time before. I was at home using my wifi and my wifi strength was at its maximum for the iPad.
The battery was at 40 something%, so I charged it over night. It has the latest iOS update software. I had downloaded that yesterday.
I plugged it into iTunes on my computer and the same thing is happening. It's picking up my icloud stuff like my music and videos and my computer is trying to import photos from my mini ipad automatically, but my iPad isn't fully recognizable on iTunes. I get 2 error messages. One says, "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." I also get an error when trying to import photos (just to try it out). The other error message says, "The iPad cannot be sync because this iPad cannot be found."
And so, I unplugged it and plugged it back in and I get the same response. My iTunes is the latest version.
I don't have warranty on this iPad and I spent like $500 on this one. I'm kinda worried...?
Any kind of response would be appreciated....First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
First in German:
Ich hab heute versucht mein Iphone 5 auf das IOS 7 zu installieren - böser Fehler, ich hab jetzt immer und immer wieder die Fehlermeldung 3014 gekriegt (einmal die 21, aber das war beim 3. Versuch, seitdem nur 3014). Mein Iphone befindet sich jetzt im Wartungszustand und kommt nicht mehr raus...
Ich hab auch schon so ziemlich alle Vorschläge auf der Seite, zu der mich die Fehlermeldung führt ausprobiert, ausser das mit dem Router - weil sich dessen Firewall nicht ausschalten lässt (ist ein W723V Typ A von der Telekom) und weil ich nicht weiß, wie ich da irgendwas mit dem Server gs.apple.com konfigurieren kann - das bietet die Benutzereinstellung von dem Teil nicht an - und ich hab auch die Firewall von meinen Norton 360 nur ausgeschaltet und nicht deinstalliert, da ich nicht weiß, ob ich den nochmal installiert kriege - ach ja - und einen anderen PC hab ich nicht ausprobiert, weil ich um 23:50 Uhr Nachts nicht bei anderen Leuten einfallen kann...
Hat jemand einen Tipp, wie ich das beheben kann, bzw. wie ich rausfinde, ob es jetzt am Router, am Norton oder am PC liegt? Alle Software ist übrigens aktualisiert - was noch nicht aktualsiert hab, hab ich ausgeschaltet - aber nichts hilft!
Alles andere bei Itunes funktioniert super - also ich kann Musik kaufen und abspielen - im iTunes - IPhone geht ja grad net...
Danke!
Now in English:
I have tried to update my Iphone 5 to IOS 7 today - grave mistake, now I keep getting error message 3014 (once I got 21, but that was on try 3 - and since then I keep only getting 3014). My iPhone is now in "support mode"? - sorry, I don't know what "Wartungszustand" is in Englisch - however, the iphone is not usable anymore and when I connect it to iTunes it tells me that it detected that the iPhone is in "Wartungszustand" and I need to restore it to the settings with which I bought it - which is not working because it keeps giving me the 3014 error message.
I have tried everything that the website the error message sent me to has listed - except for the following:
- the stuff with the internet router, because in the settings it is not possible to switch of the firewall, and I have no clue how to tell it to allow access to gs.apple.com - there is no option where I can put in an address like that!
- deinstalling my Norton 360 firewall - I have switched it off, but I am not willing to deinstall it, because I have no clue if I get it up and running again - and how...
- using another person's computer - because it is midnight and I can not run down the only person's door, who I know has an iPhone at this time of the night...
Does anyone have an idea how I can find out which programm is causing the trouble? Or if it is really only related to the "Wartungszustand"? - All software is up to date - that which wasn't I already updated earlier this evening.
Oh - and itunes works fine otherwise (downloading and playing freshly bought music...)
Thanks,
LörchenJa... auf alle mögliche Art und Weise... auch mit Hilfe vom Telefon-Support...
Am Ende hat jetzt doch nur geholfen, dass mir meine Kollegin ihr MacBook geliehen hat - darauf konnte ich mein iPhone wiederherstellen - das seltsame ist nur .- ich hab dann auch gleich mein iPad auf iOS 7 akutalisiert (wo ich den Hilfsrechner schonmal da hab *ggg*) - hab's aber erst mit meinem Windows Vista probiert - DA hat es einwandfrei funktioniert... vielleicht war das Update für's iPad (immerhin knapp 20 MB weniger) grad noch klein genug für meine alte, lahme Windows-Gurke? Oder das MacBook nebendran hat es eingeschüchtert?
Keine Ahnung! Werde mir demnächst ein Apple-PC kaufen - das war eh geplant...
Trotzdem Danke an alle, die mir helfen wollten!
LG
Lörchen -
I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
The last version on iTunes on my PC was iTunes 7.
Thanks for your help,
Julia from WoodridgeUnfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)
Maybe you are looking for
-
Error-Receiver File Adapter using Variable substitution when file is empty
XI Experts, We are on PI 7.0, SP14. We are using variable subtitution to get the filename from source message. This works fine as long as we have data in the payload for filename element. But we have a scenario where we don't have to create file when
-
Macbook pro mid 2010 13.3 inch - battery charging
I have a Macbook Pro mid 2010, 13.3 inches. The battery stopped charging, I see the problem was the dc MagSafe. Replaced it, now only connects the laptop (I've tried with another battery and the problem persists, my battery works and usually carries
-
CS6 Encore requiring a second encode of H264 BluRay from media encoder
Have noticed that when I encode an H264 file in Blu-Ray for encore, that when I try to build the DVD I get a message that the file is not proessed. If I go back to media encoder and reprocess the existing H264 file, Encore will then accept it. I th
-
I have been enjoying some of Logics plugins and would like to partake of other plugins out there that people rave about. I don't have an indepth understanding of how the plugins interface with Logic. Can I just buy say a Waves bundle and load the sof
-
Can you change the export resolution for photos published to Facebook?
Hi, I noticed when I published photos to Facebook, it uploads the photos as high resolution 2048 pixel wide photos (when you download from Facebook). Is there anyway to reduce the resolution other than exporting a lower resolution version of the ima