Trouble updating Firmware for OS X Tiger install

Hi,
I'm having trouble installing OS X Tiger. I currently have OS 10.2.8 installed and get a message that I need to update my firmware in order to install Tiger, but the only firmware update I can find is for OS 9. Is there any way to accomplish this without having to reinstall OS 9?
Thanks,
Pete

Updating the firmware on your model of iMac can only be done when a Mac OS 9 system is used to start up the computer; this system can be located on the hard disk, an USB flash or hard disk, or an external FireWire hard disk. You cannot use the system on a Mac OS 9 CD for this purpose without installing it.
(19938)

Similar Messages

Trouble updating Firmware for BEFW11S4

I'm using a BEFW11S4 Version 3. I recently wired it to a new computer with Vista and everything works great, but I haven't been able to update the Firmware. According to the setup page, I'm using Firmware Version 1.45.10 Apr 15 2004. I downloaded the new firmware and tried updating it from the "upgrade firmware" option on the "Help" tab, but that didn't do anything. Then I tried downloading and using the "setup wizard," and it claims it installed properly, but my Firmware version is still 1.45.10. Curiously, the "upgrade firmware" page layout changed a little after this. When I tried using this new version of the "upgrade firmware" page, in Netscape it says "Please Wait! Setup will take a few minutes" and sits there indefinitely (I've left it for hours), and in Explorer it gets interrupted with message "Upgrade action is not finish!! Upgrade file pattern error." Does anyone have any suggestions?

Okay… go to ftp://ftp.linksys.com/pub/network/ and download TFTP.exe, save this file on computer, run this file it would ask for server address and password…provide IP address of router as a server address and password of router and browse the firmware file and try upgrading firmware using tftp application…

How to update firmware for SSD Toshiba Air 2012

How to update firmware for SSD Toshiba THNSNS128GMFP ??
My disk see on system as SandForse 200026BB 33Kb

https://discussions.apple.com/message/22108992#22108992
https://discussions.apple.com/thread/5120950?start=0&tstart=0
https://discussions.apple.com/message/22649139#22649139
https://discussions.apple.com/thread/5300125?tstart=0
Seems to be a real issue. Here's to hoping Apple will address this issue sooner rather than later.

When will new update (firmware) for E72 will come?

when will new update (firmware) for E72 will come?

Firmware update for E72 has already been released..
v22.007 has been around for many European models since around January
v23.002 has been around for Asian/Middle-East models since this February.
Some operator-branded phones may not have available updates yet though.
You can use the Device Software Update page (search for the links in Nokia website) and enter your product code to find out if your product code has been included in the firmware updates already.

Unable To Repair/Update Firmware for a Creative Nomad Jukebox

Hello all,
I've been trying for the past...3 or 4 hours to get my player to work, but it simply refuses to work =P. I sent the problem into Creative, but haven't gotten a response for a couple days now. So, here's a copy-paste of what I sent in that e-mail. If you can think of anything that might help, please don't hesitate to post! I really need your help on this one!
My player's hard dri've recently died, and I received
a replacement from the original store (a CompUSA).
However, my Firmware for the device has failed. I
tried the firmware upgrade for my Zen, but after
a certain number of tries, I gave up. Here is the
list of steps that I followed.
On Zen: Click "Reload OS", let it run, it says
run the firmware upgrader now.
On Computer: "You cannot install this firmware
update with your player's current drivers using
the SB394 connector. To update your player's
firmware, this application will temporarily
replace the current drivers and restore them after
the installation is complete. Continue
installation?", I click Yes. Then it says to
disconnect, and re-connect. I do it.
It shows my version (.2.0), and I'm upgrading/
repairing it to .2.02. When I click "Upgrade", a
warning message pops up and says:
"Your player cannot start up properly. Please
reboot your player and run this application again.
I've done this at least 0 times, and nothing changes. My player is a Nomad Jukebox Zen, the one with a FireWire connection, and like I said,
I've tried this at least 0 times with the same results. Is there a process to completely remove
the firmware on the device, then reinstall it,
or to roll it back or something? Any other ideas
to fix this problem is needed as well.

Bump.

Can't update firmware for Ipod Touch on my PC

I have a 1st gen Ipod touch & windows xp. I have the latest itunes.
It will not let me update the firmare, but I can sync fine.
To update the firmware, I give it to my husband and he can do it from his computer. Then I can sync with no problems. It's just the updating firmware that causes the ipod to crash (1602 error, but occassionally other numbers).
We thought it might have been that I didn't have USB 2 ports, so I bought a USB 2, 4 port card, and my husband helped me install it. Unfortunately this did not solve the problem and it still wont let me update. I thought perhaps because the usb 2 card came with driver disks, it might need a driver. But I checked the driver disk and it contained drivers for strange things I didn't have. Then I checked the internet and it said that with xp the drivers should be automatic with windows update, and mine is all updated, I checked.
I've checked my devices manager list, and the list only contains one "enhanced" usb port, even though the card I have has 4 ports, but maybe I am not understanding how the devices list works.
Just to clarify, have had the same problem with 2 ipod touches. My orignal one got a cracked screen (one crack so covered by warranty) and I received the replacement ipod touch yesterday, and I still could not update the firmware on my PC. My husband had to do it on his PC (vista).
Thanks in advance for any suggestions. I really would like to be able to update the firmware on my own PC, it's geting extremely annoying.

Because I cannot sync my music to my iPhone without updating on my PC which has all my iTunes. Where should I have posted my question to get the help I need?

Updating firmware for N95

I've installed the latest software updater and tried to update the firmware for my N95 (RM-159). It says I'm running version 10.0.018 and that there are no updates available for my phone yet everyone is talking about version 12. Am I doing something wrong?

clarification on the branded question - Did you buy a "sim free" phone (meaning that you got the phone as it was delivered from Nokia) or did you buy it from someone like Vodafone or O2 or something similar?
As if you did the latter there is a chance that the vendor has "changed" the firmware so that they then can decide what is the best firmware to use, And they would test it internally before releasing it to its userbase. That would be the reason for why your phone says that there is no newer firmware as they would control this "check".

When will updated firmware for the WRT600N be available.

Since the IEEE has approved the 802.11N standard, we should expect updated firmware supporting the approved standard.
Any guess when?

I made the assumption that all of the Draft N routers would get a firmware update once the 802.11n specification was approved. It sounds like I may have been too optimistic.
I can't really complain too much. The WRT600N router has been working perfectly since I installed it two years ago. I have been able to connect with devices running 802.11a, 802.11b, 802.11g and 802.11n (draft) with no problems. I also get excellent signal stength through both floors of a fairly large house.

How to update firmware for mac os x

I downloaded firmware for my MacBook Pro 2007. Can someone assist me with the installation. The firmware is on my desktop but I do not know which application to open it with? I am confused by all of the files.

Hello Kappy,
Thank you for responding so quickly. I went online to Apple to update my MacBook Pro 2007 (Mac OS X 10.4.11) I have Firefox 3.6.28 as my internet connection. I downloaded the firmware to my MacBook Pro. I opened the Firmware restoration CD download and the following files were there:
IM51_0090_08B.fd
IM61_0093_05B.fd
LICENSE
MB21_00A5_06B.fd
MBP21_00A5_02B.fd
MBP22_00A5_02B.fd
MP11_005C_04B.fd
MP21_007F_02B.fd
README
XS11_0080_00B.fd
When I tried to open them to figure out which file I needed for the update. I received a message saying an application is needed to open the file(s). I do not know where to go from here. Do you have any idea how to proceed? I truly appreciate your support.

Looking for updated firmware for MDHD500-N 31704000 R IOMEGA Network Hard Drive

I'm looking for newer firmware for my IOMEGA Network Hard Drive, model MDHD500-N 31704000 R.
My current firmware level is K1.04 L1.0 W1.1 but I'm encountering weird write commit kind of problems. Low level formatted the drive already and did a factory reset.
Running Windows 7.
thanks.

Hi everybody,
Finally, I found the file on a french driver dump :
The descripton of the file is at : http://www.touslesdrivers.com/index.php?v_page=23&v_code=22439&v_langue=en
You can down load the firmware at : http://fichiers.touslesdrivers.com/22439/storcenter_home_firmware-k108w15-d31462802.bin
Link are still up and upgrade with the new firmware is ok.
I still have upnp av error while I try to access the disk throught a media player connected on my TV, but the rest of the K108 firmware is totally functionnal on my drive.
I keep a backup of the firmware file, and I can upload it to everyone needed it, (specially if you can't download teh firmware from the link I post below)
Hope it could help someone...
Does someone know if it is possible to get a low level access to the drive and to the code its running (I need to debug my upnp problem...) ?

Looking for updated firmware for MDHD320-N 31679300R IOMEGA Network Hard Drive

I'm looking for newer firmware for my IOMEGA Network Hard Drive, model MDHD320-N, P/N 31679300R.
My current firmware level is K1.01 L1.0 W1.1 but I'm encountering problems with connection with computer Windows 7 (errors 1028).
Where can i find the latest version of firmware?
Many thanks.

Hello wolly
Unfortunately the firmware for this unit is no longer available from the LenovoEMC support page. I recommend checking the NAS-Central.org forums to see if anyone has anymore info on the firmware.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

How do I update firmware for mid 2011 iMac running Yosemite?

I tried the link in the Apple support pages, but it told me I need Lion to install it. I bought the computer used. It came with Mavericks and I updated to Yosemite. I don't have Lion or any way (or desire to) install it.

There is no update for the mid-2011 iMac firmware that will fix the fans running at high speed.
Only the OEM (original equipment manufacturer) Apple hard drives had the proprietary firmware designed to properly monitor the hard drive temperature.
So you have several possible solutions:
1. If the computer was sold to you with a warranty, rather than "AS IS", my first choice would be to force the seller to restore the computer to the condition it was represented to be in when you purchased it, with an OEM Apple 500GB drive that does not cause the fan problem. If they cannot or will not correct the problem, make them take it back and refund your money. Consumer advocates such as the Better Business Bureau can help you prepare a formal complaint against the seller, and perhaps lead to a successful resolution through arbitration, without hiring an attorney and filing a lawsuit.
2. If you bought the computer "AS IS", you'll have to attempt to repair the problem yourself:
A) Locate an exact replacement for the original OEM Apple hard drive with the proper firmware and install it on your own;
B) Purchase a 'compatibility kit'. OtherWorldComputing www.macsales.com reverse-engineered a solution to the problem and sells a short cable with an external temperature sensor for the hard drive that can be used successfully with non-OEM drives. http://eshop.macsales.com/item/OWC/DIDIMACHDD11/
They also sell the sensor cable with a toolkit that can be used to disassemble and install the cable. http://eshop.macsales.com/item/OWC/DIYIMACHDD11/
C) Try the fan control program mentioned in earlier replies.

Database update failed for some organizations when installing Update Rollup 1 for Microsoft Dynamics CRM 2013 Service Pack 1

Hi,
We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
Does anyone know how to fix this problem?
09:10:41| Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115. Continuing with other orgs. Exception: System.ArgumentNullException: Value cannot be null.
Parameter name: type
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

Hi,
We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
Does anyone know how to fix this problem?
09:10:41| Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115. Continuing with other orgs. Exception: System.ArgumentNullException: Value cannot be null.
Parameter name: type
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

HT1846 when will the update released for boot camp to install in 3TB drive to install windows 8

I would like to install windows 8 on my 3TB drive since the boot camp is not supported yet for 3 TB only supports upto to 2.2 TB when will be the update released

Apple is not here, just end-users like you. Anyone end-user who does has this knowlege would violating a non-disclosure agreent if he responded.
You best action at this point is to use the one path we have for getting info to Apple people working on technologies:
http://www.apple.com/feedback/macosx.html

How to update firmware for HP Compaq DC small form factor

I have HP Compaq dc7700 small form factor, Windows xp pro. It was bought on ebay and works fine except for one thing. The Bios was upgraded but the firmware is not upgrading. the Bios was upgraded to V3.05 but the firmware remains 2.04
I downloaded al the updates and firmware and followed instructions but I seem to have problems updating the firmware. I would like to know how to do this step by step because the instructions I read seems to be missing some steps. my question is how to update the firmware. I did read the instructions but could not get it updated. either updating via windows or in dos, I can't seem to make it successful. There are two error messages,
1. ME BIOS Extension module has halted. Update BIOS or Management Engine firmware if problem persists.
2. Amt mamagement engine is disabled.

HP normally uses the term BIOS to refer to motherboard/CPU "firmware" updates and Firmware to refer to other device "firmware" updates... Below is a list of the two classes of firmware;
BIOS
Business Desktops BIOS Utilities 4.02 Rev. A
Microcode Update for HP 786E BIOS Family Computers with Intel Processors 1.06 Rev. A
HP Compaq Business Desktop ME Firmware Update and Utilities 2.2.30.1046 Rev. A
HP Compaq dc7700p Business Desktop System BIOS for Intel vPro Technology (786E1 BIOS) 3.05 Rev. A
HP Compaq Business Desktop System BIOS (786E1 BIOS) 1.15 Rev. A
Firmware
Western Digital 7200-rpm Hard Drive Firmware Update 3.03E03 Rev. A
Intel PRO/1000 Firmware 1.10 Rev. A
HP Optical Drive (TSST H353B DVD-ROM) Firmware Update BC08 Rev. A
HP Optical Drive (TSST H653N DVD-RW) Firmware Update HB02 Rev. A
Seagate Hard Drive Firmware Upgrade for 500-GB Barracuda 7200.11 HP13 Rev. A
ATI X1600XT Graphics Card Video BIOS Update S3A67124.104 Rev. A
Samsung Hard Drive Firmware Upgrade - SATA Drives 42_51 Rev. A
Please identify the exact device you wish to upgrade/update the firmware to.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Trouble updating Firmware for OS X Tiger install

Similar Messages

Maybe you are looking for