Trouble updating software version to 2.0

In iTunes, when I click on "Update" software version, it states that the version I have (1.1.4) is the latest version. Anyone knows what I need to do in order to update the iPhone software version to 2.0? Thanks!

I cannot seem to download iTunes 7.7 either. When I click on "Help", then I click on "Check for updates", it shows me that 7.7 is available and asks if I want to download it. When I click on "Yes", nothing happens. I've rebooted the computer to see if it helps, but it doesn't download. I never tried deleting iTunes from the computer and reinstalling it again. If I did this, would I lose what is on the iPhone as well as my purchase history?

Similar Messages

  • I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

    I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

    yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

  • How to update software version ios 7 to my ipod touch?

    how to update a software version ios 7 to my ipod touch?

    Confirm that you have a fifth-generation iPod touch:
    http://support.apple.com/kb/HT1353
    If you do, post back. If you don't, then you can't update it to iOS 7.
    Regards.

  • Error when downloading Iphone update software version 3.1

    Have been trying to downlaod and update my Iphone 3Gs to the latest 3.1 software
    using Itunes version 9.0.0.70 but after 20-30% I get an error message 3529 which states that my network time session has expired and to check my network settings and it will stop.I will then try downloading it again, and the same thing happens
    after downloading about 95Mb of the 306.2MB file. Can someone help me?
    And I think its taking abit too long to download this file as the download time
    shows about 3-4 hours.

    I have a similar problem, My Iphone has gone into recovery mode since trying to install 3.1. I have correct updated software ITunes 9, QT 7.6.4, Safari 4.0.3. My iPhone is in recovery mode and when connected to iTunes it is indicated that the phone software is up to date. To recover the phone there is no option provided except to update the software which is 306 MB (20 hours download time for me). the first time I attempted I got an error after 10 hours. Is there another way to recover my phone?

  • Unable to Update Software version

    I own a generation 3 iTouch and every time I connect to my iTunes it tell me that it will check next time for updates.  My iTouch in currently running:
    software version 4.2.1 and it is extremely slow.  I don't know what I can do so it can update the software to 4.3.  I have wiped out the itouch already and still I am not able to update the software version.
    Can someone please help!!

    I just noticed that it is only at 2G.  Is there anything I can do to upgrade since the software version that I do have make everything on the iPod work extremely slow?
    Thank you for your help.

  • UPDATE software version 10.1.0.273

    I read that the new software version 10.1.0.273 for Q10 was released for Bell, Rogers, and Telus. Does anyone know where it is? It is not available through BlackBerry Link.
    Linda

    apologies, 273 is not leaked, the 2342 is leaked, just to clarify

  • HT4972 Trouble updating software on iPod

    Using iOS 4.3.5 and trying to update software (iPod Software Update) via iTunes. I keep getting the error message "There was a problem downloading the software for the iPod. The network connection was reset."
    Any ideas?

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    - Then try on another computer

  • Updating Software Version

    I have a Mac OS X 10.4.11 and was wondering how I would update the software to a higher version. I at least need the 10.5 version, because I need iTunes 10 as well, for my new iPod Touch

    Hello, and welcome to Apple Support Discussions!
    You would have to purchase a retail or full install version of OS X 10.5
    Leopard (not available at the store) from a seller, or from someone who
    has a retail - not computer specific version - install DVD, who no longer
    is running it in their computer.
    Apple sales support, as indicated in the Apple web site, may be contacted
    and you could ask for a product specialist (by phone) concerning this need
    for the Leopard OS X 10.5 install DVD; since you need it to use the new
    iPod Touch with your older computer. In the US, 1-800-MY-APPLE is the
    main sales/support number. There also is an AppleCare number that I no
    longer remember, which in some instances may be conditionally helpful.
    If you have an Intel-based Mac computer (not a PowerPC G3/G4/G5) you
    could likely use the latest OS X 10.6 Snow Leopard upgrade. It will not
    work in the older PowerPC Macs; nor will discs from another computer.
    For an upgrade to Mac OS X 10.5 Leopard, I was fortunate to be looking
    locally and found individuals who gave me good deals on Leopard 10.5
    retail DVD install software; and other Apple-related items; a great deal.
    Other options include auction and online sales, where the price for the
    Leopard 10.5 and Tiger 10.4 retail DVD install discs can be sky high.
    Good luck & happy computing!

  • I can´t update software version 1.3 for my iPod nano from iTunes 7.0.2

    Error -48 Everything works properly - Connection attempt to Apple web site was successful. Connection attempt to iTunes Store was successful. Secure connection attempt to iTunes Store was successful.
    Pop up informs me about new version of ipod software 1.3 and when I start to download, appx. a 30 seconds to error -48 pops up. Please is there any other chance how to update my nano to version 1.3?
    Thanks
    M.

    hmmmmm.
    do you have any better success if you try doing a "download only" of the 1.3 firmware, and then doing the update once it has been safely downloaded?

  • Trouble Updating Software

    I'm trying to update the software on my iPhone 3GS to 3.1.3. Right now I'm at 3.1. I've tried twice and I keep getting the error that my iPhone couldn't be updated because the firmware file is not compatible. I've updated my phone before, so I'm not sure why I'm having problems now. My husband updated his iphone on the same computer with no problem. I tried both the Update & Install button on the popup screen and I also tried just clicking on Update on the iPhone page. I ejected the phone and reconnected it between the two attempts. Any ideas? I've looked through the apple support and haven't seen this problem.

    From the Finder open the Mac HD, Open the Applications folder, open the Utilities folder and double click the Disk Utilities icon. Once open select the Mac HD volume with the OS in the upper left column of the window (it should just below the HD manufacturers ID number). Now click Repair Disk Permissions in the right lower column. Close Disk Utilities.
    You can also use the Combo Updater.
    Joe

  • HT1338 Trouble Updating Software

    Every time we go to update our software (from OS X 10.6.5) an error message comes up at the end of the downloading process that says that the update may be corrupted and could not be saved. Has anyone else had this issue? What can we do to get our system upgraded?

    Install the OS X 10.6.8 combo release which contains all updates, which can be downloaded from here.  Use Disk Utility to repair permissions before installing the combo release, install it, and repair permissions again afterwards. Then run Software Update in case anything else needs updating.

  • Trouble updating software for Iphone 4. It is frozen in mid-stride asking for itunes password to continue. I can't access the phone to put in password during update though. What to do?

    Can't update my Iphone 4 software. It is asking for Itunes password but the phone is updating. Can't type in password. What to do?

    Hello there, jibblywig.
    When unsuccessful with updating an iOS device, the following Knowledge Base article provides some great initial steps for troubleshooting:
    Resolve iOS update and restore errors in iTunes - Apple Support
    If the issue persists, this article offers some additional steps to try:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Trouble  updating software from  app store

    I am  getting an error message (error 100) every tie I  try to update  my software updates from the app store.   What is the problem and what do I need to do?

    Many folks are getting these errors. Tel Apple and perhaps they will fix it.
    http://www.apple.com/feedback/macosx.html

  • Trouble updating software on Mac? just says error 104

    trying to update to Macbook Air EFI Firmware Update 2.6 but app store will not allow me too. what do i need to do so that it will update? It wont even download when i restart the computer.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • II have downloaded several Apps that state they work with iTouch but they will not install and give error message that I need updated software, while all my updates available are installed on both iTouch and my computer iTunesWhy will Mindtools app not

    My iPod Touch will not function with certain updated apps ie MindTools, YP.com, Mint, Ymessenger etc and I get the error message that I need to install updated software to load these apps to my iPod Touch; however, I have double checked and all the software updates have been loaded in obht the iPod touch and my computer. There are no updates availabe; yet the error message on App is a software update is required for App. "was not installed because it requires a newer version of iPod software."
    The iPod Touch is using 3.1.3 software and it tells me that is the current and updated software version.

    You are correct in that your 1G iPod Touch has all the latest software updates.  It can only be updated to version 3.1. 
    However that Apps you are trying to download and install likely require iOS version 4.0 or later, which is not compatible with your iPod Touch.  So either you'll need to buy a newer iPod Touch or find other Apps that are suitable replacements if possible. 
    Sorry.
    B-rock

Maybe you are looking for

  • I reset my iPad but the backup in the laptop i used for syncing was deleted. How can I restore the iPad?

    I wanted to upgrade the iOS of my iPad to version 5. I reset the iPad knowing that I did not need the files or pictures I had in the gadget were already copied. As I proceded I forgot to attach it to the laptop but when I did, It opened the menu wher

  • Dynamic creation of Controls in JSF ??????

    i just started on JSF...I've good experience with ASP.NET.... I have liked what I've seen so far in JSF.....It's pretty straight forward ...neat clean and simple... What I am looking for in JSF is a way to create controls in a page dynamically.... A

  • AOL stripping pdf from "multipart/alternative" text email

    Hi! I am using MYOB AccountEdge and it has a function within the program to send out statements as pdf attachments to a text email. As of the beginning of this year, AOL is stripping off the pdf attachment, but the text email goes through. Last year,

  • XI Receiver Adapter: No receiver could be determined

    Hello guys, I'm at the moment connecting Contract Accounts Receivable and Payable 6.00 http://help.sap.com/erp2005_ehp_02/helpdata/en/9c/0d03d4beeb40848e15329b4e63976e/frameset.htm My scenario has a XI Receiver Adapter. I have set up the receiver agr

  • Movieclip button in movieclip?

    i have put the attached code in a frame, that's in a movieclip. gotei13_thumbnail is a movieclip, that's in the same movieclip as the script. why does this not work? if i copy the script to a frame on the main timeline, and copy gotei13_thumbnail to