Trouble upgrading to kernel 2.6.22 [SOLVED]

Hi,
It's been awhile since I updated my system.  Ran pacman -Syu today, and I'm now having difficulty booting to the new kernel.  On boot, at "loading Modules", the system is responding:
FATAL: Could not load /lib/modules/2.6.21-ARCH/modules.dep
Thereafter, several modules fail to load.
I've tried re-installing kernel26
pacman -Sf kernel26
and this seems to run successfully.  I've rebooted, and gone so far as doing a power cycle to make sure the disk cache was flushed.
I noticed a new
kconfig26.pacnew
file in the boot directory, so I renamed the old one, and moved ".pacnew" to kconfig26, then reran the installation of the kernel, and still no soap.
I'm sure that I've done something stupid here, but any advice you could offer would be most appreciated!
Last edited by desertViking (2007-08-15 22:37:11)

Hmm.  Definitely confusing.
uname -a indicates that I am booted to 2.6.21-ARCH kernel.  So, I reran mkinitcpio with, and without, the -k option, and it was definitely generating 2.6.22-ARCH.
So, in the /boot directory, I again checked the names.  Out of curiosity, I renamed kernel26.img to kernel26.img.sav, and vmlinuz to vmlinuz.sav, and, hmm, rebooted to 2.6.21.
Seems like 2.6.21 kernel is somewhere, but I'll be darned if I can figure out where it's pulling from.
The menu.lst
title Arch Linux (2007)
root (hd0,2)
kernel /boot/vmlinuz26 root=/dev/sda3 ro vga=792
initrd /boot/kernel26.img
should be referencing /sda3/boot, correct?
Edit:
Found it!  At some point long ago, I pointed /boot in fstab to the sda1.  This was where the kernels were being regenerated.
But I was booting to sda3.  This contained the old image.
I copied the images to sda3, and I was able to boot.  I've regenerated the kernel image just to make sure that everything is pointing to the proper places.
Thank you for the clues and advice.
Last edited by desertViking (2007-08-15 22:36:14)

Similar Messages

  • Hang on boot after upgrade to kernel 2.6.31 [SOLVED]

    hey all,
    My system hangs after installing 2.6.31.  the message is this:
    pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
    i tried 2.6.30, but compiz was too slow, so i went back to 2.6.29.  dmesg:
    Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
    BIOS-e820: 00000000cfda0000 - 00000000cfdae000 (ACPI data)
    BIOS-e820: 00000000cfdae000 - 00000000cfdf0000 (ACPI NVS)
    BIOS-e820: 00000000cfdf0000 - 00000000cff00000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    DMI present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    last_pfn = 0xcfda0 max_arch_pfn = 0x100000
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009f000 (usable)
    modified: 000000000009f000 - 00000000000a0000 (reserved)
    modified: 00000000000e6000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000cfda0000 (usable)
    modified: 00000000cfda0000 - 00000000cfdae000 (ACPI data)
    modified: 00000000cfdae000 - 00000000cfdf0000 (ACPI NVS)
    modified: 00000000cfdf0000 - 00000000cff00000 (reserved)
    modified: 00000000fff00000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000130000000 (usable)
    kernel direct mapping tables up to 377fe000 @ 10000-15000
    RAMDISK: 7fbab000 - 7ffef415
    Allocated new RAMDISK: 005a6000 - 009ea415
    Move RAMDISK from 000000007fbab000 - 000000007ffef414 to 005a6000 - 009ea414
    ACPI: RSDP 000F9410, 0014 (r0 ACPIAM)
    ACPI: RSDT CFDA0000, 003C (r1 7577MS A7577100 20090427 MSFT 97)
    ACPI: FACP CFDA0200, 0084 (r1 7577MS A7577100 20090427 MSFT 97)
    ACPI Warning (tbfadt-0596): Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 [20081204]
    FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
    ACPI: DSDT CFDA0440, A216 (r1 A7577 A7577100 100 INTL 20051117)
    ACPI: FACS CFDAE000, 0040
    ACPI: APIC CFDA0390, 006C (r1 7577MS A7577100 20090427 MSFT 97)
    ACPI: MCFG CFDA0400, 003C (r1 7577MS OEMMCFG 20090427 MSFT 97)
    ACPI: OEMB CFDAE040, 0072 (r1 7577MS A7577100 20090427 MSFT 97)
    ACPI: HPET CFDAA660, 0038 (r1 7577MS OEMHPET 20090427 MSFT 97)
    ACPI: SSDT CFDAA6A0, 088C (r1 A M I POWERNOW 1 AMD 1)
    ACPI: Local APIC address 0xfee00000
    2437MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 00000000 - 377fe000
    bootmap 00011000 - 00017f00
    (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 00005a2604] TEXT DATA BSS ==> [0000100000 - 00005a2604]
    #4 [00005a3000 - 00005a6000] INIT_PG_TABLE ==> [00005a3000 - 00005a6000]
    #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
    #7 [00005a6000 - 00009ea415] NEW RAMDISK ==> [00005a6000 - 00009ea415]
    #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
    found SMP MP-table at [c00ff780] 000ff780
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x000cfda0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000cfda0
    On node 0 totalpages: 851247
    free_area_init_node: node 0, pgdat c0430600, node_mem_map c1000200
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3951 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 4876 pages used for memmap
    HighMem zone: 619158 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8300 base: 0xfed00000
    SMP: Allowing 4 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Allocating PCI resources starting at d0000000 (gap: cff00000:30000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Allocating 36864 bytes of per cpu data
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844595
    Kernel command line: root=/dev/disk/by-uuid/deebdc30-3ac7-4de2-81d2-eb4d199468b9 ro quiet vga=792 splash
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Fast TSC calibration using PIT
    Detected 3214.713 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 3367428k/3405440k available (2363k kernel code, 36780k reserved, 1059k data, 340k init, 2496136k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc045d000 - 0xc04b2000 ( 340 kB)
    .data : 0xc034ec74 - 0xc0457a88 (1059 kB)
    .text : 0xc0100000 - 0xc034ec74 (2363 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    hpet clockevent registered
    HPET: 4 timers in total, 1 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.31 BogoMIPS (lpj=10715710)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using C1E aware idle routine
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20081204
    ACPI: Checking initramfs for custom DSDT
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 6431.80 BogoMIPS (lpj=10714888)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    System has AMD C1E enabled
    Switch to broadcast mode on CPU1
    Booting processor 2 APIC 0x2 ip 0x6000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 6431.79 BogoMIPS (lpj=10714876)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 2
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#2.
    x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
    CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
    checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    Switch to broadcast mode on CPU2
    Booting processor 3 APIC 0x3 ip 0x6000
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 6431.80 BogoMIPS (lpj=10714888)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 3
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#3.
    x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
    CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
    checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    Brought up 4 CPUs
    Total of 4 processors activated (25726.72 BogoMIPS).
    Switch to broadcast mode on CPU3
    Switch to broadcast mode on CPU0
    net_namespace: 1016 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
    PCI: Using configuration type 1 for base access
    PCI: Using configuration type 1 for extended access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    PCI: Using MMCONFIG for extended config space
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
    pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:05.0: PME# disabled
    pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:07.0: PME# disabled
    pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:09.0: PME# disabled
    pci 0000:00:11.0: reg 10 io port: [0x8000-0x8007]
    pci 0000:00:11.0: reg 14 io port: [0x7000-0x7003]
    pci 0000:00:11.0: reg 18 io port: [0x6000-0x6007]
    pci 0000:00:11.0: reg 1c io port: [0x5000-0x5003]
    pci 0000:00:11.0: reg 20 io port: [0x3000-0x300f]
    pci 0000:00:11.0: reg 24 32bit mmio: [0xf9fffc00-0xf9ffffff]
    pci 0000:00:11.0: set SATA to AHCI mode
    pci 0000:00:12.0: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff]
    pci 0000:00:12.1: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff]
    pci 0000:00:12.2: reg 10 32bit mmio: [0xf9fff800-0xf9fff8ff]
    pci 0000:00:12.2: supports D1 D2
    pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:12.2: PME# disabled
    pci 0000:00:13.0: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff]
    pci 0000:00:13.1: reg 10 32bit mmio: [0xf9ffb000-0xf9ffbfff]
    pci 0000:00:13.2: reg 10 32bit mmio: [0xf9fff400-0xf9fff4ff]
    pci 0000:00:13.2: supports D1 D2
    pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:13.2: PME# disabled
    pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
    pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
    pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
    pci 0000:00:14.2: reg 10 64bit mmio: [0xf9ff4000-0xf9ff7fff]
    pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:14.2: PME# disabled
    pci 0000:00:14.5: reg 10 32bit mmio: [0xf9ffa000-0xf9ffafff]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
    pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:01:00.0: reg 24 io port: [0x9800-0x987f]
    pci 0000:01:00.0: reg 30 32bit mmio: [0xfe7e0000-0xfe7fffff]
    pci 0000:00:02.0: bridge io port: [0x9000-0x9fff]
    pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfe7fffff]
    pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:02:00.0: reg 10 io port: [0xa800-0xa8ff]
    pci 0000:02:00.0: reg 18 64bit mmio: [0xf8eff000-0xf8efffff]
    pci 0000:02:00.0: reg 20 64bit mmio: [0xf8ef8000-0xf8efbfff]
    pci 0000:02:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:05.0: bridge io port: [0xa000-0xafff]
    pci 0000:00:05.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
    pci 0000:00:05.0: bridge 64bit mmio pref: [0xf8e00000-0xf8efffff]
    pci 0000:03:00.0: reg 10 io port: [0xb800-0xb8ff]
    pci 0000:03:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff]
    pci 0000:03:00.0: reg 20 64bit mmio: [0xf8ff8000-0xf8ffbfff]
    pci 0000:03:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:06.0: bridge io port: [0xb000-0xbfff]
    pci 0000:00:06.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
    pci 0000:00:06.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
    pci 0000:04:00.0: reg 10 64bit mmio: [0xfeaff800-0xfeafffff]
    pci 0000:04:00.0: reg 18 io port: [0xc800-0xc8ff]
    pci 0000:04:00.0: supports D2
    pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
    pci 0000:00:07.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
    pci 0000:05:00.0: reg 24 32bit mmio: [0xfebfe000-0xfebfffff]
    pci 0000:05:00.0: PME# supported from D3hot
    pci 0000:05:00.0: PME# disabled
    pci 0000:05:00.1: reg 10 io port: [0xe800-0xe807]
    pci 0000:05:00.1: reg 14 io port: [0xe400-0xe403]
    pci 0000:05:00.1: reg 18 io port: [0xe000-0xe007]
    pci 0000:05:00.1: reg 1c io port: [0xd800-0xd803]
    pci 0000:05:00.1: reg 20 io port: [0xd400-0xd40f]
    pci 0000:00:09.0: bridge io port: [0xd000-0xefff]
    pci 0000:00:09.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
    pci 0000:00:14.4: transparent bridge
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 47, should be 46 [20081204]
    PCI: Using ACPI for IRQ routing
    pci 0000:00:00.0: BAR 3: can't allocate resource
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet: hpet2 irq 24 for MSI
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    pnp 00:0d: mem resource (0x100000-0xcfefffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0a: ioport range 0x40b-0x40b has been reserved
    system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
    system 00:0a: ioport range 0xc00-0xc01 has been reserved
    system 00:0a: ioport range 0xc14-0xc14 has been reserved
    system 00:0a: ioport range 0xc50-0xc51 has been reserved
    system 00:0a: ioport range 0xc52-0xc52 has been reserved
    system 00:0a: ioport range 0xc6c-0xc6c has been reserved
    system 00:0a: ioport range 0xc6f-0xc6f has been reserved
    system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
    system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
    system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
    system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
    system 00:0a: ioport range 0xcd8-0xcdf has been reserved
    system 00:0a: ioport range 0x800-0x89f has been reserved
    system 00:0a: ioport range 0xb00-0xb0f has been reserved
    system 00:0a: ioport range 0xb20-0xb3f has been reserved
    system 00:0a: ioport range 0x900-0x90f has been reserved
    system 00:0a: ioport range 0x910-0x91f has been reserved
    system 00:0a: ioport range 0xfe00-0xfefe has been reserved
    system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
    system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
    system 00:0b: ioport range 0x600-0x6df has been reserved
    system 00:0b: ioport range 0x6e0-0x6ef has been reserved
    system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
    Switched to high resolution mode on CPU 3
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 2
    Switched to high resolution mode on CPU 0
    pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:02.0: IO window: 0x9000-0x9fff
    pci 0000:00:02.0: MEM window: 0xfa000000-0xfe7fffff
    pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:05.0: IO window: 0xa000-0xafff
    pci 0000:00:05.0: MEM window: 0xfe800000-0xfe8fffff
    pci 0000:00:05.0: PREFETCH window: 0x000000f8e00000-0x000000f8efffff
    pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:06.0: IO window: 0xb000-0xbfff
    pci 0000:00:06.0: MEM window: 0xfe900000-0xfe9fffff
    pci 0000:00:06.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
    pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
    pci 0000:00:07.0: IO window: 0xc000-0xcfff
    pci 0000:00:07.0: MEM window: 0xfea00000-0xfeafffff
    pci 0000:00:07.0: PREFETCH window: disabled
    pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
    pci 0000:00:09.0: IO window: 0xd000-0xefff
    pci 0000:00:09.0: MEM window: 0xfeb00000-0xfebfffff
    pci 0000:00:09.0: PREFETCH window: disabled
    pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
    pci 0000:00:14.4: IO window: disabled
    pci 0000:00:14.4: MEM window: disabled
    pci 0000:00:14.4: PREFETCH window: disabled
    pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:02.0: setting latency timer to 64
    pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:05.0: setting latency timer to 64
    pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:06.0: setting latency timer to 64
    pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:07.0: setting latency timer to 64
    pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:09.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
    pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe7fffff]
    pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff]
    pci_bus 0000:01: resource 3 mem: [0x0-0x0]
    pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
    pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
    pci_bus 0000:02: resource 2 mem: [0xf8e00000-0xf8efffff]
    pci_bus 0000:02: resource 3 mem: [0x0-0x0]
    pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
    pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
    pci_bus 0000:03: resource 2 mem: [0xf8f00000-0xf8ffffff]
    pci_bus 0000:03: resource 3 mem: [0x0-0x0]
    pci_bus 0000:04: resource 0 io: [0xc000-0xcfff]
    pci_bus 0000:04: resource 1 mem: [0xfea00000-0xfeafffff]
    pci_bus 0000:04: resource 2 mem: [0x0-0x0]
    pci_bus 0000:04: resource 3 mem: [0x0-0x0]
    pci_bus 0000:05: resource 0 io: [0xd000-0xefff]
    pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
    pci_bus 0000:05: resource 2 mem: [0x0-0x0]
    pci_bus 0000:05: resource 3 mem: [0x0-0x0]
    pci_bus 0000:06: resource 0 mem: [0x0-0x0]
    pci_bus 0000:06: resource 1 mem: [0x0-0x0]
    pci_bus 0000:06: resource 2 mem: [0x0-0x0]
    pci_bus 0000:06: resource 3 io: [0x00-0xffff]
    pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 4369k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1252627399.657:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1711
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:02.0: setting latency timer to 64
    pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:05.0: setting latency timer to 64
    pcieport-driver 0000:00:05.0: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:06.0: setting latency timer to 64
    pcieport-driver 0000:00:06.0: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:07.0: setting latency timer to 64
    pcieport-driver 0000:00:07.0: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:09.0: setting latency timer to 64
    pcieport-driver 0000:00:09.0: irq 29 for MSI/MSI-X
    vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 6144k, total 14336k
    vesafb: mode is 1024x768x32, linelength=4096, pages=1
    vesafb: protected mode interface info at c000:b2e0
    vesafb: pmi: set display start = c00cb343, set palette = c00cb39e
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 340k freed
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pata_acpi 0000:00:14.1: setting latency timer to 64
    pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
    pata_acpi 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    pata_acpi 0000:05:00.1: setting latency timer to 64
    pata_acpi 0000:05:00.1: PCI INT B disabled
    ahci 0000:00:11.0: version 3.0
    ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    ahci 0000:00:11.0: irq 30 for MSI/MSI-X
    ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 30
    ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 30
    ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 30
    ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 30
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    pata_jmicron 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    pata_jmicron 0000:05:00.1: setting latency timer to 64
    scsi4 : pata_jmicron
    scsi5 : pata_jmicron
    ata5: PATA max UDMA/100 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 18
    ata6: PATA max UDMA/100 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 18
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ata1: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H493A, D200, max UDMA/33, ATAPI AN
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H493A D200 PQ: 0 ANSI: 5
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata4.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
    ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata4.00: configured for UDMA/133
    scsi 3:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
    ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    scsi6 : pata_atiixp
    scsi7 : pata_atiixp
    ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    ahci 0000:05:00.0: setting latency timer to 64
    scsi8 : ahci
    scsi9 : ahci
    ata9: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 17
    ata10: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 17
    ata9: SATA link down (SStatus 0 SControl 300)
    ata8.01: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
    ata8.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata8.01: configured for UDMA/100
    scsi 7:0:1:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
    ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ehci_hcd 0000:00:12.2: EHCI Host Controller
    ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:12.2: debug port 1
    ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9fff800
    ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ohci_hcd 0000:00:12.0: OHCI Host Controller
    ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9ffe000
    Driver 'sd' needs updating - please use bus_type methods
    sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 3:0:0:0: [sda] Write Protect is off
    sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 3:0:0:0: [sda] Write Protect is off
    sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 3:0:0:0: [sda] Attached SCSI disk
    sd 7:0:1:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 7:0:1:0: [sdb] Write Protect is off
    sd 7:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    sd 7:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 7:0:1:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 7:0:1:0: [sdb] Write Protect is off
    sd 7:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    sd 7:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1
    sd 7:0:1:0: [sdb] Attached SCSI disk
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:13.2: debug port 1
    ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9fff400
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ohci_hcd 0000:00:12.1: OHCI Host Controller
    ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9ffd000
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9ffc000
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 3 ports detected
    ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9ffb000
    ata10: SATA link down (SStatus 0 SControl 300)
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 3 ports detected
    ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:14.5: OHCI Host Controller
    ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ffa000
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    usb 3-2: new high speed USB device using ehci_hcd and address 3
    usb 3-2: configuration #1 chosen from 1 choice
    hub 3-2:1.0: USB hub found
    hub 3-2:1.0: 4 ports detected
    usb 5-1: new low speed USB device using ohci_hcd and address 2
    usb 5-1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input1
    generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    usb 3-2.4: new high speed USB device using ehci_hcd and address 4
    usb 3-2.4: configuration #1 chosen from 1 choice
    hub 3-2.4:1.0: USB hub found
    hub 3-2.4:1.0: 4 ports detected
    usb 3-2.4.1: new low speed USB device using ehci_hcd and address 5
    usb 3-2.4.1: configuration #1 chosen from 1 choice
    input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.0/input/input2
    generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.2-2.4.1/input0
    input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.1/input/input3
    generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.2-2.4.1/input1
    SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    SGI XFS Quota Management subsystem
    XFS mounting filesystem sda3
    Ending clean XFS mount for filesystem: sda3
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 146
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    r8169 0000:02:00.0: setting latency timer to 64
    r8169 0000:02:00.0: irq 31 for MSI/MSI-X
    eth0: RTL8168d/8111d at 0xf888c000, 00:24:21:b7:ca:4d, XID 281000c0 IRQ 31
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    r8169 0000:03:00.0: setting latency timer to 64
    r8169 0000:03:00.0: irq 32 for MSI/MSI-X
    eth1: RTL8168d/8111d at 0xf8696000, 00:24:21:b7:ca:4c, XID 281000c0 IRQ 32
    HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    usbcore: registered new interface driver snd-usb-audio
    input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
    ACPI: Power Button (CM) [PWRB]
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [P001] (supports 8 throttling states)
    processor ACPI_CPU:01: registered as cooling_device1
    processor ACPI_CPU:02: registered as cooling_device2
    processor ACPI_CPU:03: registered as cooling_device3
    sr 1:0:0:0: Attached scsi generic sg0 type 5
    sd 3:0:0:0: Attached scsi generic sg1 type 0
    sd 7:0:1:0: Attached scsi generic sg2 type 0
    Linux agpgart interface v0.103
    ohci1394 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ohci1394 0000:04:00.0: setting latency timer to 64
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
    input: PC Speaker as /devices/platform/pcspkr/input/input6
    ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
    ACPI: Device needs an ACPI driver
    piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: WMI: Mapper loaded
    nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    nvidia 0000:01:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0001947652]
    Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
    r8169: eth0: link up
    r8169: eth0: link up
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    nvclock:4989 freeing invalid memtype fd000000-fd010000
    nvclock:4989 freeing invalid memtype fd010000-fd030000
    nvclock:4989 freeing invalid memtype fd010000-fd030000
    IRQ 18/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
    eth0: no IPv6 routers present
    ideas?
    Last edited by pnatural (2009-09-17 19:59:58)

    pnatural wrote:
    hi,
    I was able to install 2.6.31 by setting the motherboards E-SATA/RAID mode to "ACPI" instead of "PCI".  I first tried to disable the motherboard raid completely, but the system would not boot at all that way; setting the mode to "ACPI" did the trick.
    I would say thanks, but I did all the work!  But thanks to the Arch folks for a great distribution.
    Hi,I got the follow message,much same with you,could you tell me how to deal?thx.
    Nov  3 23:00:06 ArchLinux kernel: pci 0000:00:14.2: BAR 0: address space collision on of device [0xd4408000-0xd440bfff]

  • Kernel 2.6.25 upgrade = MadWifi: unable to attach hardware [SOLVED]

    Hello,
    After I upgraded my kernel to 2.6.25 on my laptop with an Atheros AR242x, which I use normally use MadWifi with, stopped working. I am unable to get any wifi0 or ath0 device to show up in ifconfig. The most descriptive error I could pull up was "MadWifi: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3)" out of dmesg, which you can see below. It was suggested in the IRC channel I compile MadWifi from testing out of abs which I did but it didn't seem to change anything.
    Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sat Apr 19 15:39:26 CEST 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
    BIOS-e820: 0000000037e80000 - 0000000037e92000 (ACPI data)
    BIOS-e820: 0000000037e92000 - 0000000037f00000 (ACPI NVS)
    BIOS-e820: 0000000037f00000 - 0000000038000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    894MB LOWMEM available.
    Scan SMP from c0000000 for 1024 bytes.
    Scan SMP from c009fc00 for 1024 bytes.
    Scan SMP from c00f0000 for 65536 bytes.
    found SMP MP-table at [c00f7c60] 000f7c60
    Entering add_active_range(0, 0, 228992) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 228992
    HighMem 228992 -> 228992
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 228992
    On node 0 totalpages: 228992
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1757 pages used for memmap
    Normal zone: 223139 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI present.
    ACPI: RSDP 000F7BB0, 0014 (r0 TOSINV)
    ACPI: RSDT 37E8AD9E, 0040 (r1 TOSINV TOSINV00 6040000 LTP 0)
    ACPI: FACP 37E91D8A, 0074 (r1 TOSINV Bonefish 6040000 ATI F4240)
    ACPI: DSDT 37E8BAC8, 62C2 (r1 TOSINV SB450 6040000 MSFT 100000E)
    ACPI: FACS 37E92FC0, 0040
    ACPI: APIC 37E91DFE, 0050 (r1 TOSINV APIC 6040000 LTP 0)
    ACPI: SLIC 37E91E4E, 0176 (r1 TOSINV TOSINV00 6040000 INV 0)
    ACPI: MCFG 37E91FC4, 003C (r1 TOSINV MCFG 6040000 LTP 0)
    ACPI: SSDT 37E8B5B0, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
    ACPI: SSDT 37E8B351, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
    ACPI: SSDT 37E8ADDE, 0573 (r1 PmRef CpuPm 3000 INTL 20050228)
    ACPI: DMI detected: Toshiba
    ATI board detected. Disabling timer routing over 8254.
    ACPI: PM-Timer IO Port: 0x8008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:14 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 40000000 (gap: 38000000:a8000000)
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227203
    Kernel command line: root=/dev/sda1 ro vga=773
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 1729.253 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 902908k/915968k available (2075k kernel code, 12516k reserved, 712k data, 268k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf7e80000 ( 894 MB)
    .init : 0xc03bf000 - 0xc0402000 ( 268 kB)
    .data : 0xc0306cf8 - 0xc03b8e80 ( 712 kB)
    .text : 0xc0100000 - 0xc0306cf8 (2075 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 3462.16 BogoMIPS (lpj=5768270)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 1024K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20070126
    ACPI: Checking initramfs for custom DSDT
    CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c
    Total of 1 processors activated (3462.16 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
    Brought up 1 CPUs
    net_namespace: 548 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:14.4
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
    ACPI: Power Resource [FN00] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
    system 00:08: ioport range 0x1080-0x1080 has been reserved
    system 00:08: ioport range 0x220-0x22f has been reserved
    system 00:08: ioport range 0x400-0x401 has been reserved
    system 00:08: ioport range 0x40b-0x40b has been reserved
    system 00:08: ioport range 0x4d0-0x4d1 has been reserved
    system 00:08: ioport range 0x4d6-0x4d6 has been reserved
    system 00:08: ioport range 0x530-0x537 has been reserved
    system 00:08: ioport range 0xc00-0xc01 has been reserved
    system 00:08: ioport range 0xc14-0xc14 has been reserved
    system 00:08: ioport range 0xc50-0xc52 has been reserved
    system 00:08: ioport range 0xc6c-0xc6c has been reserved
    system 00:08: ioport range 0xc6f-0xc6f has been reserved
    system 00:08: ioport range 0xcd4-0xcd5 has been reserved
    system 00:08: ioport range 0xcd6-0xcd7 has been reserved
    system 00:08: ioport range 0xcd8-0xcdf has been reserved
    system 00:08: ioport range 0x8000-0x805f has been reserved
    system 00:08: ioport range 0x8210-0x821f has been reserved
    system 00:08: ioport range 0xf40-0xf47 has been reserved
    system 00:08: ioport range 0x280-0x293 has been reserved
    system 00:08: ioport range 0x87f-0x87f has been reserved
    system 00:09: iomem range 0xe0000-0xfffff could not be reserved
    system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:09: iomem range 0x0-0xfff could not be reserved
    PCI: Bridge: 0000:00:01.0
    IO window: 9000-9fff
    MEM window: 0xc0000000-0xc00fffff
    PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
    PCI: Bridge: 0000:00:04.0
    IO window: disabled.
    MEM window: 0xc0100000-0xc01fffff
    PREFETCH window: disabled.
    PCI: Bus 6, cardbus bridge: 0000:05:06.0
    IO window: 0x0000a800-0x0000a8ff
    IO window: 0x0000ac00-0x0000acff
    PREFETCH window: 0x40000000-0x43ffffff
    MEM window: 0x44000000-0x47ffffff
    PCI: Bridge: 0000:00:14.4
    IO window: a000-afff
    MEM window: 0xc0200000-0xc02fffff
    PREFETCH window: 0x0000000040000000-0x0000000043ffffff
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    PCI: Enabling device 0000:05:06.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 23 (level, low) -> IRQ 23
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Unpacking initramfs... done
    Freeing initrd memory: 541k freed
    apm: BIOS not found.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:05.0: Boot video device
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:04.0:pcie00]
    vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 131072k
    vesafb: mode is 1024x768x8, linelength=1024, pages=169
    vesafb: protected mode interface info at c000:52fd
    vesafb: pmi: set display start = c00c536b, set palette = c00c53a5
    vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
    vesafb: scrolling: redraw
    vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 268k freed
    No dock devices found.
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:14.1 to 64
    scsi0 : pata_atiixp
    scsi1 : pata_atiixp
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
    Switched to high resolution mode on CPU 0
    ata2.00: ATAPI: PIONEER DVD-RW DVR-K17A, 1.50, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17A 1.50 PQ: 0 ANSI: 5
    sata_sil 0000:00:12.0: version 2.3
    PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
    ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
    scsi2 : sata_sil
    scsi3 : sata_sil
    ata3: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc0507080 irq 22
    ata4: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc05070c0 irq 22
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata3.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
    ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata3.00: configured for UDMA/100
    ata4: SATA link down (SStatus 0 SControl 300)
    scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 < sda5 > sda3
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sd 2:0:0:0: [sda] Attached SCSI disk
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    ACPI: AC Adapter [ADP0] (off-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input3
    ACPI: Power Button (CM) [PWRB]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    ACPI: Transitioning device [FAN0] to D3
    ACPI: PNP0C0B:00 is registered as cooling_device0
    ACPI: Fan [FAN0] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device1
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (59 C)
    ACPI: LNXTHERM:02 is registered as thermal_zone1
    ACPI: Transitioning device [FAN0] to D0
    ACPI: Unable to turn cooling device [f78183d8] 'on'
    ACPI: Thermal Zone [TZ01] (56 C)
    Marking TSC unstable due to: TSC halts in idle.
    sr 1:0:0:0: Attached scsi generic sg0 type 5
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    ACPI: \_SB_.PCI0.IDE_.SECD.S_D0: found ejectable bay
    ACPI: \_SB_.PCI0.IDE_.SECD.S_D0: Adding notify handler
    ACPI: Error installing bay notify handler
    ACPI: Bay [\_SB_.PCI0.IDE_.SECD.S_D0] Added
    ACPI: \_SB_.PCI0.IDE_.SECD.S_D1: found ejectable bay
    ACPI: \_SB_.PCI0.IDE_.SECD.S_D1: Adding notify handler
    ACPI: Error installing bay notify handler
    ACPI: Bay [\_SB_.PCI0.IDE_.SECD.S_D1] Added
    Linux agpgart interface v0.103
    ACPI: device:1f is registered as cooling_device2
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    input: Video Bus as /class/input/input5
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0504000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    8139too Fast Ethernet driver 0.9.28
    input: PC Speaker as /class/input/input6
    ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0506000
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 8 ports detected
    ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 20 (level, low) -> IRQ 20
    ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    eth0: RealTek RTL8139 at 0xf8b24800, 00:a0:d1:6d:dc:08, IRQ 20
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0505000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    Symbol init_mm is marked as UNUSED, however this module is using it.
    This symbol will go away in the future.
    Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
    [fglrx] Maximum main memory to use for locked dma buffers: 802 MBytes.
    [fglrx] ASYNCIO init succeed!
    [fglrx] PAT is enabled successfully!
    [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
    8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    Yenta: CardBus bridge found at 0000:05:06.0 [1179:ff10]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:05:06.0, mfunc 0x01111002, devctl 0x44
    piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
    Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
    synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
    input: SynPS/2 Synaptics TouchPad as /class/input/input7
    Yenta: ISA IRQ mask 0x0ef8, PCI irq 23
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
    cs: IO port probe 0xa000-0xafff: clean.
    pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    ath5k_pci 0000:02:00.0: registered as 'phy0'
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    ath5k phy0: failed to resume the MAC Chip
    ACPI: PCI interrupt for device 0000:02:00.0 disabled
    ath5k_pci: probe of 0000:02:00.0 failed with error -5
    ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
    ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
    hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[c0200000-c02007ff] Max Packet=[2048] IR/IT contexts=[4/8]
    ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    wlan: trunk
    ath_pci: trunk
    PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    MadWifi: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3)
    ACPI: PCI interrupt for device 0000:02:00.0 disabled
    EXT3 FS on sda1, internal journal
    NTFS driver 2.1.29 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    NTFS-fs error (device sda5): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
    Adding 1004052k swap on /dev/sda3. Priority:-1 extents:1 across:1004052k
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d16ddc08]
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    hda-intel: Invalid position buffer, using LPIB read method instead.
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    Last edited by JesseC (2008-04-25 17:25:52)

    tomk wrote:
    Thanks, I'll add it to my collection.
    I expect you blacklisted ath5k, right? Better the devil you know and all that, but I would give ath5k a try sometime. It's in mainline, and will eventually replace madwifi altogether.
    Yes I did, I eventually will have to go to ath5k but currently madwifi works without a problem so I see no real reason to move over at the moment. In other words, I'll let someone else be the beta tester on that project

  • Tvtime not working after upgrading to kernel-2.6.31-1 (Solved)

    Hello friends,
    When I am using kernel-2.6.30.8 it was everything ok with my system. tvtime has been working with least cpu utilization then. But after upgrading to kernel-2.6.31-1 I got following error messages when trying to open tvtime
    damu@station210 ~]$ tvtime
    Running tvtime 1.0.2.
    Reading configuration from /etc/tvtime/tvtime.xml
    Reading configuration from /home/damu/.tvtime/tvtime.xml
    xvoutput: No XVIDEO port found which supports YUY2 images.
    *** tvtime requires hardware YUY2 overlay support from your video card
    *** driver. If you are using an older NVIDIA card (TNT2), then
    *** this capability is only available with their binary drivers.
    *** For some ATI cards, this feature may be found in the experimental
    *** GATOS drivers: http://gatos.souceforge.net/
    *** If unsure, please check with your distribution to see if your
    *** X driver supports hardware overlay surfaces.
    What happened to driver and kernel? any way to go back to previous kernel version?
    Requesting help! Thanks
    Last edited by mvdvarrier (2009-10-14 06:26:14)

    Perry3D wrote:
    Are you using the xf86-video-ati/radeonhd driver?
    Try disabling KMS by appending nomodeset to the kernel parameters. At the moment kms ist not usable without upgrading some libs (mesa?, libdrm?). Search the forums for kms to get more information.
    Thanks Perry3D
    I disabled KMS as per http://wiki.archlinux.org/index.php/ATI. Now tvtime is working great. With the release of kernel 2.6.32 KMS can be enabled for ati card with radeon3200 chips
    mvdvarrier

  • [Solved] HDMI audio broken after upgrading to kernel 3.13.4

    Hi,
    Yesterday I upgraded to kernel 3.13.4 from 3.12.9 and
    HDMI audio through my nVidia GTX660 card stopped working.
    The problem occurs both with nouveau and nVidia drivers.
    My system is an aged Intel quadcore Q9400 on a Intel motherboard.
    By typing "aplay -l" I get:
    card 0: Intel [HDA Intel], device 0: 92HD73E1X5 Analog [92HD73E1X5 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: 92HD73E1X5 Digital [92HD73E1X5 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Strangely the alsa card number changed from 1 to 2
    after the kernel upgrade.
    I would really appreciate any help.
    Thanks
    Last edited by tenoriocalc (2014-02-23 16:02:46)

    Thank you very much, silenceleaf.
    I managed to make it work with some tweaking like you said.
    But only after a deep power cycle, unpluging any power to the system.
    Just turning off the machine's power button was not enough. Odd!
    Last edited by tenoriocalc (2014-02-23 16:09:44)

  • Trouble upgrading to gtk2-2.6.0

    Hallo, i had just upgraded libglade and gtk2, during the installation i've had this error:
    Targets: gtk2-2.6.0-1
    Total Package Size: 6.7 MB
    Proceed with upgrade? [Y/n]
    checking package integrity... done.
    loading package data... done.
    checking for file conflicts... done.
    upgrading gtk2... done.
    usr/bin/gtk-query-immodules-2.0: error while loading shared libraries: libXfixes.so.3: cannot open shared object file: No such file or directory
    After the upgrade a lot of apps didn't works anymore (nicotine, downloaderx ecc), everytime giving the same error:
    ImportError: libXfixes.so.3: cannot open shared object file: No such file or directory
    I've solved downgrading to the old version of gtk2 and libglade, anyway, i've looked for libXfixes.so.3 around and i've found something intresting here:
    http://www.webservertalk.com/message661337.html
    It seems that libXfixes.so.3 only exist in xorg 6.8.1 but  i cannot upgrade my xorg because of the ati driver, and, probably, xfree86 users will have the same problem.
    Does someone know how to solve it??

    Ops... i haven't done it, and i don't know how to do it!  :oops:  :oops:
    morphus: have u had trouble with ati-driver upgrading to kernel 2.6.10?? i've just found a patch that  make everything works and i've added it to the PKGBUILD from Link Dupont, you can find that patch and more infos here: http://www.rage3d.com/board/showthread.php?t=33797225
    ...ok i know... i'm just trying to speak about something else ...
    Is there a form to fill or i only have to send an email to the package mantainer??? 
    Let me know (and sorry for my english)
    greetings and happy new year!!

  • Upgrade to kernel 3.12.6-1: Blank Screen Boot

    Hi all,
    after performing today the upgrade to kernel 3.12.6-1 on my Lenovo V570 I was confronted with the following boot issue:
    After selecting the Archlinux boot entry in gummiboot the screen becomes blank.
    I am using gummiboot on a separate EFI partition. The weird thing is that if I boot into UEFI shell from the archlinux cd I can select
    fs0:/EFI/Boot/BOOTX64.EFI
    and it boots like a charm.
    Downgrading to 3.12.5-1 solves the problem and upgrading again causes it again to happen. I can not find any useful information in my system log but I nevertheless append it. (the log originates from a boot via UEFI shell therefor the 3.12.6-1 kernel)
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda3 rw
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac86fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bac87000-0x00000000badbffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000badc0000-0x00000000badc8fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000badc9000-0x00000000baefefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000baeff000-0x00000000baf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable
    [ 0.000000] e820: update [mem 0xb6e58018-0xb6e68057] usable ==> usable
    [ 0.000000] e820: update [mem 0xb6e4b018-0xb6e57057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b6e4b017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000b6e4b018-0x00000000b6e57057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000b6e57058-0x00000000b6e58017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000b6e58018-0x00000000b6e68057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000b6e68058-0x00000000bac86fff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000bac87000-0x00000000badbffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000badc0000-0x00000000badc8fff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000badc9000-0x00000000baefefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000baeff000-0x00000000baf9efff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x00000000bafff000-0x00000000baffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.00 by Phoenix Technologies Ltd.
    [ 0.000000] efi: ACPI=0xbaffe000 ACPI 2.0=0xbaffe014 SMBIOS=0xbae87000
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000054000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x0000000000054000-0x0000000000055000) (0MB)
    [ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x0000000000055000-0x000000000008f000) (0MB)
    [ 0.000000] efi: mem05: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
    [ 0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
    [ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f54000) (15MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f54000-0x000000007fd1c000) (2013MB)
    [ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007fd1c000-0x0000000080000000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x00000000b3e58000) (830MB)
    [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000b3e58000-0x00000000b3e78000) (0MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000b3e78000-0x00000000b5e96000) (32MB)
    [ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x00000000b5e96000-0x00000000b6306000) (4MB)
    [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000b6306000-0x00000000b6e48000) (11MB)
    [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000b6e48000-0x00000000b6e4b000) (0MB)
    [ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x00000000b6e4b000-0x00000000b6e6a000) (0MB)
    [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000b6e6a000-0x00000000b6e6b000) (0MB)
    [ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x00000000b6e6b000-0x00000000b6e6f000) (0MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000b6e6f000-0x00000000b6e70000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000b6e70000-0x00000000b6e87000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000b6e87000-0x00000000b6f00000) (0MB)
    [ 0.000000] efi: mem24: type=1, attr=0xf, range=[0x00000000b6f00000-0x00000000b6f47000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000b6f47000-0x00000000b7405000) (4MB)
    [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000b7405000-0x00000000b830c000) (15MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000b830c000-0x00000000b84e2000) (1MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000b84e2000-0x00000000b86bf000) (1MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000b86bf000-0x00000000b86c2000) (0MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000b86c2000-0x00000000b9291000) (11MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000b9291000-0x00000000b92b3000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000b92b3000-0x00000000b931c000) (0MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000b931c000-0x00000000b931d000) (0MB)
    [ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000b931d000-0x00000000b931e000) (0MB)
    [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000b931e000-0x00000000b931f000) (0MB)
    [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000b931f000-0x00000000b9320000) (0MB)
    [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000b9320000-0x00000000b9321000) (0MB)
    [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000b9321000-0x00000000b956c000) (2MB)
    [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000b956c000-0x00000000b956d000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000b956d000-0x00000000b9588000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000b9588000-0x00000000b958c000) (0MB)
    [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000b958c000-0x00000000b9597000) (0MB)
    [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000b9597000-0x00000000b9598000) (0MB)
    [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000b9598000-0x00000000ba5a7000) (16MB)
    [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000ba5a7000-0x00000000ba9de000) (4MB)
    [ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x00000000ba9de000-0x00000000bac87000) (2MB)
    [ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000bac87000-0x00000000bace7000) (0MB)
    [ 0.000000] efi: mem48: type=5, attr=0x800000000000000f, range=[0x00000000bace7000-0x00000000bad87000) (0MB)
    [ 0.000000] efi: mem49: type=6, attr=0x800000000000000f, range=[0x00000000bad87000-0x00000000badc0000) (0MB)
    [ 0.000000] efi: mem50: type=10, attr=0xf, range=[0x00000000badc0000-0x00000000badc9000) (0MB)
    [ 0.000000] efi: mem51: type=6, attr=0x800000000000000f, range=[0x00000000badc9000-0x00000000bae87000) (0MB)
    [ 0.000000] efi: mem52: type=0, attr=0xf, range=[0x00000000bae87000-0x00000000baeff000) (0MB)
    [ 0.000000] efi: mem53: type=10, attr=0xf, range=[0x00000000baeff000-0x00000000baf9f000) (0MB)
    [ 0.000000] efi: mem54: type=9, attr=0xf, range=[0x00000000baf9f000-0x00000000bafe5000) (0MB)
    [ 0.000000] efi: mem55: type=9, attr=0xf, range=[0x00000000bafe5000-0x00000000bafff000) (0MB)
    [ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x00000000bafff000-0x00000000bb000000) (0MB)
    [ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x0000000100000000-0x000000013fe00000) (1022MB)
    [ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
    [ 0.000000] efi: mem59: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: LENOVO 1066ERG/Emerald Lake, BIOS 44CN42WW 09/22/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask FC0000000 write-back
    [ 0.000000] 6 base 13FE00000 mask FFFE00000 uncachable
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 2 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
    [ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
    [ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x13fc00000-0x13fdfffff]
    [ 0.000000] [mem 0x13fc00000-0x13fdfffff] page 2M
    [ 0.000000] BRK [0x02b35000, 0x02b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fbfffff]
    [ 0.000000] [mem 0x13c000000-0x13fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
    [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbac86fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbabfffff] page 2M
    [ 0.000000] [mem 0xbac00000-0xbac86fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbafff000-0xbaffffff]
    [ 0.000000] [mem 0xbafff000-0xbaffffff] page 4k
    [ 0.000000] BRK [0x02b36000, 0x02b36fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x7fd1c000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000baffe014 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000baffe120 0008C (v01 LENOVO CB-01 00000001 LENO 00000001)
    [ 0.000000] ACPI: FACP 00000000bafee000 000F4 (v03 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: DSDT 00000000baff1000 09AC3 (v02 LENOVO SNB-CPT 00000000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000baf3d000 00040
    [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO CB-01 00000001 LENO 00000001)
    [ 0.000000] ACPI: SSDT 00000000baffb000 01068 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
    [ 0.000000] ACPI: ASF! 00000000baff0000 000A5 (v32 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: HPET 00000000bafed000 00038 (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: APIC 00000000bafec000 00098 (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: MCFG 00000000bafeb000 0003C (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000bafea000 00954 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bafe9000 007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bafe8000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000bafe7000 0003E (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000bafe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000bafe5000 00256 (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdfffff]
    [ 0.000000] NODE_DATA [mem 0x13fdf8000-0x13fdfcfff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b400000-ffff88013f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x13fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008efff]
    [ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
    [ 0.000000] node 0: [mem 0x00100000-0xbac86fff]
    [ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x13fdfffff]
    [ 0.000000] On node 0 totalpages: 1026598
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 1182 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11891 pages used for memmap
    [ 0.000000] DMA32 zone: 760968 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4088 pages used for memmap
    [ 0.000000] Normal zone: 261632 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb6e4b000-0xb6e4bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb6e57000-0xb6e57fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb6e58000-0xb6e58fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb6e68000-0xb6e68fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbac87000-0xbadbffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbadc0000-0xbadc8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbadc9000-0xbaefefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaeff000-0xbaf9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbb9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbba00000-0xbf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
    [ 0.000000] e820: [mem 0xbfa00000-0xf80f7fff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fa00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009373
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda3 rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3891132K/4106392K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 215260K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.591 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.73 BogoMIPS (lpj=7981970)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000019] init_memory_mapping: [mem 0xbac87000-0xbad86fff]
    [ 0.000021] [mem 0xbac87000-0xbad86fff] page 4k
    [ 0.000033] init_memory_mapping: [mem 0xbad87000-0xbadbffff]
    [ 0.000035] [mem 0xbad87000-0xbadbffff] page 4k
    [ 0.000040] init_memory_mapping: [mem 0xbadc9000-0xbae86fff]
    [ 0.000041] [mem 0xbadc9000-0xbae86fff] page 4k
    [ 0.000497] Security Framework initialized
    [ 0.000505] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000506] Yama: becoming mindful.
    [ 0.000777] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001775] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002214] Mount-cache hash table entries: 256
    [ 0.002396] Initializing cgroup subsys memory
    [ 0.002408] Initializing cgroup subsys devices
    [ 0.002410] Initializing cgroup subsys freezer
    [ 0.002411] Initializing cgroup subsys net_cls
    [ 0.002413] Initializing cgroup subsys blkio
    [ 0.002433] Disabled fast string operations
    [ 0.002434] CPU: Physical Processor ID: 0
    [ 0.002435] CPU: Processor Core ID: 0
    [ 0.002440] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.002443] mce: CPU supports 7 MCE banks
    [ 0.002454] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002463] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 5
    [ 0.002545] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.003452] ACPI: Core revision 20130725
    [ 0.008834] ACPI: All ACPI Tables successfully acquired
    [ 0.011257] ftrace: allocating 20318 entries in 80 pages
    [ 0.021231] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054265] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.054273] TSC deadline timer enabled
    [ 0.054284] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.054291] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.054293] ... version: 3
    [ 0.054293] ... bit width: 48
    [ 0.054294] ... generic registers: 4
    [ 0.054295] ... value mask: 0000ffffffffffff
    [ 0.054296] ... max period: 0000ffffffffffff
    [ 0.054297] ... fixed-purpose events: 3
    [ 0.054298] ... event mask: 000000070000000f
    [ 0.088930] Disabled fast string operations
    [ 0.091156] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.108967] Disabled fast string operations
    [ 0.077790] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.129024] Disabled fast string operations
    [ 0.131150] Brought up 4 CPUs
    [ 0.131154] smpboot: Total of 4 processors activated (19164.92 BogoMIPS)
    [ 0.134436] devtmpfs: initialized
    [ 0.136834] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
    [ 0.136836] PM: Registering ACPI NVS region [mem 0xbadc0000-0xbadc8fff] (36864 bytes)
    [ 0.136838] PM: Registering ACPI NVS region [mem 0xbaeff000-0xbaf9efff] (655360 bytes)
    [ 0.137542] RTC time: 23:36:36, date: 12/26/13
    [ 0.137577] NET: Registered protocol family 16
    [ 0.137667] cpuidle: using governor ladder
    [ 0.137668] cpuidle: using governor menu
    [ 0.137691] ACPI: bus type PCI registered
    [ 0.137693] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.137747] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.137749] PCI: not using MMCONFIG
    [ 0.137750] PCI: Using configuration type 1 for base access
    [ 0.138286] bio: create slab <bio-0> at 0
    [ 0.138390] ACPI: Added _OSI(Module Device)
    [ 0.138392] ACPI: Added _OSI(Processor Device)
    [ 0.138393] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.138394] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.139747] ACPI: EC: Look up EC in DSDT
    [ 0.141122] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.151337] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.151669] ACPI: SSDT 00000000baeef718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.152018] ACPI: Dynamic OEM Table Load:
    [ 0.152020] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.164809] ACPI: SSDT 00000000baef0a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.165180] ACPI: Dynamic OEM Table Load:
    [ 0.165182] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.174703] ACPI: SSDT 00000000baeeed98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.175044] ACPI: Dynamic OEM Table Load:
    [ 0.175046] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.193798] ACPI: Interpreter enabled
    [ 0.193807] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.193820] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.193821] ACPI: Using IOAPIC for interrupt routing
    [ 0.193837] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.194196] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
    [ 0.201387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.201512] ACPI: No dock devices found.
    [ 0.207794] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.207826] \_SB_.PCI0:_OSC invalid UUID
    [ 0.207827] _OSC request data:1 8 0
    [ 0.207855] \_SB_.PCI0:_OSC invalid UUID
    [ 0.207856] _OSC request data:1 1f 0
    [ 0.207859] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.207861] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.208401] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 0.208497] PCI host bridge to bus 0000:00
    [ 0.208500] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.208502] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.208503] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.208505] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.208507] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 0.208508] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.208515] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.208604] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 0.208635] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.208676] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.208713] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [ 0.208723] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
    [ 0.208729] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.208733] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
    [ 0.208837] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.208861] pci 0000:00:16.0: reg 0x10: [mem 0xf1a05000-0xf1a0500f 64bit]
    [ 0.208939] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.209024] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.209046] pci 0000:00:1a.0: reg 0x10: [mem 0xf1a0a000-0xf1a0a3ff]
    [ 0.209137] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.209197] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.209235] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.209251] pci 0000:00:1b.0: reg 0x10: [mem 0xf1a00000-0xf1a03fff 64bit]
    [ 0.209321] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.209368] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.209400] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.209474] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.209523] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.209556] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
    [ 0.209636] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.209684] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.209718] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [ 0.209798] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.209849] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.209891] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.209912] pci 0000:00:1d.0: reg 0x10: [mem 0xf1a09000-0xf1a093ff]
    [ 0.210003] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.210061] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.210097] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    [ 0.210273] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [ 0.210294] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
    [ 0.210302] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
    [ 0.210310] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
    [ 0.210318] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
    [ 0.210326] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
    [ 0.210334] pci 0000:00:1f.2: reg 0x24: [mem 0xf1a08000-0xf1a087ff]
    [ 0.210380] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.210456] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.210472] pci 0000:00:1f.3: reg 0x10: [mem 0xf1a04000-0xf1a040ff 64bit]
    [ 0.210493] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.210622] pci 0000:01:00.0: [10de:0df5] type 00 class 0x030000
    [ 0.210630] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
    [ 0.210639] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.210647] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.210652] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
    [ 0.210658] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.210712] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.210744] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
    [ 0.210753] pci 0000:01:00.1: reg 0x10: [mem 0xf1000000-0xf1003fff]
    [ 0.214647] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.214655] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.214662] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
    [ 0.214671] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.214795] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.214911] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
    [ 0.214957] pci 0000:03:00.0: reg 0x10: [mem 0xf1900000-0xf190ffff 64bit]
    [ 0.215184] pci 0000:03:00.0: supports D1
    [ 0.215186] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
    [ 0.215246] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.221341] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.221356] pci 0000:00:1c.1: bridge window [mem 0xf1900000-0xf19fffff]
    [ 0.221559] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.221628] pci 0000:04:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 0.221748] pci 0000:04:00.0: reg 0x18: [mem 0xf1804000-0xf1804fff 64bit pref]
    [ 0.221822] pci 0000:04:00.0: reg 0x20: [mem 0xf1800000-0xf1803fff 64bit pref]
    [ 0.222153] pci 0000:04:00.0: supports D1 D2
    [ 0.222155] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.222270] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.228036] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.228046] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.228065] pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
    [ 0.228576] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.228627] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.228674] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.228721] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.228768] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.228815] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.228862] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.228909] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.229107] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.229113] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.229163] Found 1 acpi root devices
    [ 0.229208] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.229283] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.229287] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.229288] vgaarb: loaded
    [ 0.229289] vgaarb: bridge control possible 0000:01:00.0
    [ 0.229290] vgaarb: no bridge control possible 0000:00:02.0
    [ 0.229325] PCI: Using ACPI for IRQ routing
    [ 0.230848] PCI: pci_cache_line_size set to 64 bytes
    [ 0.230911] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
    [ 0.230912] e820: reserve RAM buffer [mem 0xb6e4b018-0xb7ffffff]
    [ 0.230914] e820: reserve RAM buffer [mem 0xb6e58018-0xb7ffffff]
    [ 0.230915] e820: reserve RAM buffer [mem 0xbac87000-0xbbffffff]
    [ 0.230916] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
    [ 0.230918] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff]
    [ 0.230994] NetLabel: Initializing
    [ 0.230995] NetLabel: domain hash size = 128
    [ 0.230996] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.231008] NetLabel: unlabeled traffic allowed by default
    [ 0.231023] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.231027] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.234059] Switched to clocksource hpet
    [ 0.237888] pnp: PnP ACPI init
    [ 0.237902] ACPI: bus type PNP registered
    [ 0.237936] pnp 00:00: [dma 4]
    [ 0.237957] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.237975] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.238064] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.238093] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.238135] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.238137] system 00:04: [io 0xffff] has been reserved
    [ 0.238139] system 00:04: [io 0xffff] has been reserved
    [ 0.238142] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.238143] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.238145] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.238148] system 00:04: [mem 0xfe800000-0xfe80ffff] has been reserved
    [ 0.238151] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.238172] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.238214] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.238216] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.238280] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.238304] pnp 00:08: Plug and Play ACPI device, IDs SYN0326 SYN0300 SYN0002 PNP0f13 (active)
    [ 0.238403] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.238405] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.238407] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.238409] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.238411] system 00:09: [mem 0xf8000000-0xfbffffff] could not be reserved
    [ 0.238412] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.238414] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.238415] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.238417] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.238419] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.238420] system 00:09: [mem 0xbfa00000-0xbfa00fff] has been reserved
    [ 0.238422] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.238622] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
    [ 0.238624] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
    [ 0.238626] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.238643] pnp: PnP ACPI: found 11 devices
    [ 0.238644] ACPI: bus type PNP unregistered
    [ 0.244890] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.244925] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1080000-0xf10fffff pref]
    [ 0.244928] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.244930] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.244933] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
    [ 0.244935] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.244939] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.244950] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.244955] pci 0000:00:1c.1: bridge window [mem 0xf1900000-0xf19fffff]
    [ 0.244964] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.244968] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.244975] pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
    [ 0.244982] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.244984] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.244985] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.244987] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
    [ 0.244988] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.244990] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.244991] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
    [ 0.244993] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.244995] pci_bus 0000:03: resource 1 [mem 0xf1900000-0xf19fffff]
    [ 0.244996] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
    [ 0.244998] pci_bus 0000:04: resource 2 [mem 0xf1800000-0xf18fffff 64bit pref]
    [ 0.245025] NET: Registered protocol family 2
    [ 0.245199] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.245331] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.245426] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.245455] TCP: reno registered
    [ 0.245461] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.245480] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.245541] NET: Registered protocol family 1
    [ 0.245553] pci 0000:00:02.0: Boot video device
    [ 0.245874] PCI: CLS 64 bytes, default 64
    [ 0.245910] Unpacking initramfs...
    [ 0.297863] Freeing initrd memory: 2960K (ffff88007fd1c000 - ffff880080000000)
    [ 0.297869] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.297871] software IO TLB [mem 0xafe58000-0xb3e58000] (64MB) mapped at [ffff8800afe58000-ffff8800b3e57fff]
    [ 0.298052] Scanning for low memory corruption every 60 seconds
    [ 0.298304] audit: initializing netlink socket (disabled)
    [ 0.298314] type=2000 audit(1388100995.293:1): initialized
    [ 0.309789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.310859] zbud: loaded
    [ 0.311020] VFS: Disk quotas dquot_6.5.2
    [ 0.311056] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.311200] msgmni has been set to 7737
    [ 0.311458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.311495] io scheduler noop registered
    [ 0.311497] io scheduler deadline registered
    [ 0.311518] io scheduler cfq registered (default)
    [ 0.311669] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.311999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.312012] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.312053] efifb: probing for efifb
    [ 0.312210] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 1200k, total 1200k
    [ 0.312211] efifb: mode is 640x480x32, linelength=2560, pages=1
    [ 0.312212] efifb: scrolling: redraw
    [ 0.312214] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.312957] Console: switching to colour frame buffer device 80x30
    [ 0.313634] fb0: EFI VGA frame buffer device
    [ 0.313641] intel_idle: MWAIT substates: 0x21120
    [ 0.313642] intel_idle: v0.4 model 0x2A
    [ 0.313643] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.313755] GHES: HEST is not enabled!
    [ 0.313798] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.314197] Linux agpgart interface v0.103
    [ 0.314256] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.316817] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.316840] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.316919] mousedev: PS/2 mouse device common for all mice
    [ 0.316969] rtc_cmos 00:05: RTC can wake from S4
    [ 0.317104] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.317131] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.317138] Intel P-state driver initializing.
    [ 0.317146] Intel pstate controlling: cpu 0
    [ 0.317158] Intel pstate controlling: cpu 1
    [ 0.317176] Intel pstate controlling: cpu 2
    [ 0.317185] Intel pstate controlling: cpu 3
    [ 0.317251] drop_monitor: Initializing network drop monitor service
    [ 0.317312] TCP: cubic registered
    [ 0.317385] NET: Registered protocol family 10
    [ 0.317545] NET: Registered protocol family 17
    [ 0.317555] Key type dns_resolver registered
    [ 0.317763] registered taskstats version 1
    [ 0.318329] Magic number: 9:15:657
    [ 0.318402] rtc_cmos 00:05: setting system clock to 2013-12-26 23:36:36 UTC (1388100996)
    [ 0.318440] PM: Hibernation image not present or could not be loaded.
    [ 0.319562] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.319564] Write protecting the kernel read-only data: 8192k
    [ 0.321962] Freeing unused kernel memory: 1008K (ffff880002504000 - ffff880002600000)
    [ 0.322956] Freeing unused kernel memory: 420K (ffff880002797000 - ffff880002800000)
    [ 0.333265] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.337019] systemd-udevd[57]: starting version 208
    [ 0.359716] ACPI: bus type USB registered
    [ 0.359738] usbcore: registered new interface driver usbfs
    [ 0.359745] usbcore: registered new interface driver hub
    [ 0.359831] usbcore: registered new device driver usb
    [ 0.360573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.360797] ehci-pci: EHCI PCI platform driver
    [ 0.360949] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.360960] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.360965] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.360978] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.361255] SCSI subsystem initialized
    [ 0.364874] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.364892] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf1a0a000
    [ 0.365034] libata version 3.00 loaded.
    [ 0.374197] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.374356] hub 1-0:1.0: USB hub found
    [ 0.374362] hub 1-0:1.0: 2 ports detected
    [ 0.374553] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.374559] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.374563] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.374575] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.378492] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.378508] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1a09000
    [ 0.387569] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.387771] hub 2-0:1.0: USB hub found
    [ 0.387776] hub 2-0:1.0: 2 ports detected
    [ 0.387871] ahci 0000:00:1f.2: version 3.0
    [ 0.387962] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 0.387996] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.400932] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
    [ 0.400942] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    [ 0.400952] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.421596] scsi0 : ahci
    [ 0.421810] scsi1 : ahci
    [ 0.421900] scsi2 : ahci
    [ 0.421977] scsi3 : ahci
    [ 0.422110] scsi4 : ahci
    [ 0.422247] scsi5 : ahci
    [ 0.422302] ata1: SATA max UDMA/133 abar m2048@0xf1a08000 port 0xf1a08100 irq 41
    [ 0.422305] ata2: DUMMY
    [ 0.422307] ata3: DUMMY
    [ 0.422310] ata4: SATA max UDMA/133 abar m2048@0xf1a08000 port 0xf1a08280 irq 41
    [ 0.422315] ata5: SATA max UDMA/133 abar m2048@0xf1a08000 port 0xf1a08300 irq 41
    [ 0.422318] ata6: SATA max UDMA/133 abar m2048@0xf1a08000 port 0xf1a08380 irq 41
    [ 0.681154] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.741201] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 0.745643] ata1.00: ATA-8: WDC WD7500BPVT-24HXZT3, 03.01A03, max UDMA/133
    [ 0.745645] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.750260] ata1.00: configured for UDMA/133
    [ 0.750485] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-2 03.0 PQ: 0 ANSI: 5
    [ 0.805765] hub 1-1:1.0: USB hub found
    [ 0.805839] hub 1-1:1.0: 6 ports detected
    [ 0.911447] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.035711] hub 2-1:1.0: USB hub found
    [ 1.035769] hub 2-1:1.0: 6 ports detected
    [ 1.068241] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.114972] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
    [ 1.301693] tsc: Refined TSC clocksource calibration: 2394.560 MHz
    [ 1.388513] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.390756] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633F, LE02, max UDMA/33
    [ 1.393542] ata5.00: configured for UDMA/33
    [ 1.394894] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F LE02 PQ: 0 ANSI: 5
    [ 1.552152] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
    [ 1.705691] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
    [ 1.715446] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.721393] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    [ 1.721402] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.721543] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.721550] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.721620] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.724550] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.724555] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.724817] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 1.794754] sda: sda1 sda2 sda3 sda4 sda5
    [ 1.795987] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.302852] Switched to clocksource tsc
    [ 3.038432] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.885696] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.893387] systemd[1]: Set hostname to <fabian-lenovo-v570>.
    [ 5.089327] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 5.089448] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 5.089472] systemd[1]: Starting Remote File Systems.
    [ 5.089658] systemd[1]: Reached target Remote File Systems.
    [ 5.089679] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 5.089868] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 5.089886] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 5.090051] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 5.090067] systemd[1]: Starting Delayed Shutdown Socket.
    [ 5.090239] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 5.090255] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 5.090426] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 5.090443] systemd[1]: Starting Encrypted Volumes.
    [ 5.090575] systemd[1]: Reached target Encrypted Volumes.
    [ 5.090627] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 5.090944] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 5.090970] systemd[1]: Starting udev Kernel Socket.
    [ 5.091122] systemd[1]: Listening on udev Kernel Socket.
    [ 5.091144] systemd[1]: Starting udev Control Socket.
    [ 5.091298] systemd[1]: Listening on udev Control Socket.
    [ 5.091323] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 5.091383] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 5.091399] systemd[1]: Starting Paths.
    [ 5.091547] systemd[1]: Reached target Paths.
    [ 5.091577] systemd[1]: Starting Journal Socket.
    [ 5.091768] systemd[1]: Listening on Journal Socket.
    [ 5.129529] systemd[1]: Started Set Up Additional Binary Formats.
    [ 5.129581] systemd[1]: Mounting POSIX Message Queue File System...
    [ 5.130632] systemd[1]: Starting Setup Virtual Console...
    [ 5.131459] systemd[1]: Mounting Huge Pages File System...
    [ 5.132184] systemd[1]: Mounting Debug File System...
    [ 5.194714] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 5.195539] systemd[1]: Starting udev Coldplug all Devices...
    [ 5.239397] systemd[1]: Starting Apply Kernel Variables...
    [ 5.240133] systemd[1]: Starting Journal Service...
    [ 5.241516] systemd[1]: Started Journal Service.
    [ 5.902483] EXT4-fs (sda3): re-mounted. Opts: data=ordered
    [ 5.910089] systemd-journald[126]: Vacuuming done, freed 0 bytes
    [ 6.467249] systemd-udevd[158]: starting version 208
    [ 7.287419] ACPI: Requesting acpi_cpufreq
    [ 7.440843] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 7.444161] ACPI: Lid Switch [LID0]
    [ 7.444313] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    [ 7.444329] ACPI: Sleep Button [SLPB]
    [ 7.444432] ACPI: AC Adapter [ADP1] (on-line)
    [ 7.444458] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 7.444461] ACPI: Power Button [PWRF]
    [ 7.445047] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.508998] thermal LNXTHERM:00: registered as thermal_zone0
    [ 7.509002] ACPI: Thermal Zone [TZS0] (61 C)
    [ 7.509153] thermal LNXTHERM:01: registered as thermal_zone1
    [ 7.509154] ACPI: Thermal Zone [TZS1] (43 C)
    [ 7.731107] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 7.780275] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 7.780284] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.780288] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 7.780292] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
    [ 7.780295] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.780297] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 7.780300] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
    [ 7.780303] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.780305] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 7.780308] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
    [ 7.780311] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.780312] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 7.865642] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.865829] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
    [ 7.901873] wmi: Mapper loaded
    [ 7.911561] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6
    [ 7.991611] [drm] Initialized drm 1.1.0 20060810
    [ 8.096357] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 752809
    [ 8.128722] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
    [ 8.195250] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    [ 8.219971] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
    [ 8.250898] input: PC Speaker as /devices/platform/pcspkr/input/input8
    [ 8.262530] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 8.262607] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 8.262653] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 8.262928] hda_intel: Disabling MSI
    [ 8.262933] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 8.263013] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 8.263021] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.263109] mei_me 0000:00:16.0: setting latency timer to 64
    [ 8.263150] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
    [ 8.339279] iTCO_vendor_support: vendor-support=0
    [ 8.339733] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 8.339764] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 8.339856] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 8.379632] acer_wmi: Acer Laptop ACPI-WMI Extras
    [ 8.432857] acer_wmi: Brightness must be controlled by acpi video driver
    [ 8.432975] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
    [ 8.433053] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
    [ 8.433509] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
    [ 8.434141] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
    [ 8.434503] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 8.460907] [drm] Memory usable by graphics device = 2048M
    [ 8.460911] checking generic (e0000000 12c000) vs hw (e0000000 10000000)
    [ 8.460912] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
    [ 8.460924] Console: switching to colour dummy device 80x25
    [ 8.460987] i915 0000:00:02.0: setting latency timer to 64
    [ 8.488831] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 8.488839] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 8.488840] [drm] Driver supports precise vblank timestamp query.
    [ 8.488939] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 8.514827] [drm] Wrong MCH_SSKPD value: 0x16040307
    [ 8.514830] [drm] This can cause pipe underruns and display issues.
    [ 8.514831] [drm] Please upgrade your BIOS to fix this.
    [ 8.529627] fbcon: inteldrmfb (fb0) is primary device
    [ 8.533088] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.533112] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 8.533122] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
    [ 8.533438] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
    [ 8.533666] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xffffc90000642000, f0:de:f1:8d:be:03, XID 0c200000 IRQ 45
    [ 8.533667] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 8.559830] media: Linux media interface: v0.10
    [ 8.579104] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 8.586102] Linux video capture interface: v2.00
    [ 8.623014] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0364)
    [ 8.629644] ath: phy0: Enable LNA combining
    [ 8.631847] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 8.632376] ath: phy0: ASPM enabled: 0x43
    [ 8.632378] ath: EEPROM regdomain: 0x65
    [ 8.632379] ath: EEPROM indicates we should expect a direct regpair map
    [ 8.632381] ath: Country alpha2 being used: 00
    [ 8.632381] ath: Regpair used: 0x65
    [ 8.636801] scsi6 : SCSI emulation for RTS5139 USB card reader
    [ 8.636895] usbcore: registered new interface driver rts5139
    [ 8.636943] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
    [ 8.639495] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input13
    [ 8.639548] usbcore: registered new interface driver uvcvideo
    [ 8.639548] USB Video Class driver (1.1.1)
    [ 8.685467] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 8.685636] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004a60000, irq=17
    [ 8.708182] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 8.935054] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
    [ 8.935254] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
    [ 8.935371] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
    [ 8.935485] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
    [ 9.312910] kvm: disabled by bios
    [ 9.343649] kvm: disabled by bios
    [ 9.363224] kvm: disabled by bios
    [ 9.438677] Console: switching to colour frame buffer device 170x48
    [ 9.444389] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 9.444391] i915 0000:00:02.0: registered panic notifier
    [ 9.447706] acpi device:37: registered as cooling_device4
    [ 9.447914] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 9.448037] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input18
    [ 9.478081] acpi device:3f: registered as cooling_device5
    [ 9.478267] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 9.478346] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19
    [ 9.478433] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 10.349723] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 10.528629] Adding 6332256k swap on /dev/sda5. Priority:-1 extents:1 across:6332256k FS
    [ 11.080832] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [ 11.241929] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 11.352333] systemd-journald[126]: Received request to flush runtime journal from PID 1
    [ 17.356236] bbswitch: version 0.8
    [ 17.356254] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 17.356261] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 17.356275] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
    [ 17.356500] bbswitch: detected an Optimus _DSM function
    [ 17.356514] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 17.356562] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
    [ 17.358421] bbswitch: disabling discrete graphics
    [ 17.358436] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
    [ 17.410953] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 18.039966] r8169 0000:04:00.0 eth0: link down
    [ 18.040010] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 29.876627] hda-codec: out of range cmd 0:5:707:fffffffc
    [ 29.882774] hda-codec: out of range cmd 0:5:707:fffffffc
    [ 29.884988] hda-codec: out of range cmd 0:5:707:fffffffc
    [ 29.889446] hda-codec: out of range cmd 0:5:707:fffffffc
    [ 29.890798] hda-codec: out of range cmd 1:5:707:fffffffc
    [ 29.896169] hda-codec: out of range cmd 1:5:707:fffffffc
    [ 29.898066] hda-codec: out of range cmd 1:5:707:fffffffc
    [ 29.902784] hda-codec: out of range cmd 1:5:707:fffffffc
    [ 29.904179] hda-codec: out of range cmd 2:5:707:fffffffc
    [ 29.909467] hda-codec: out of range cmd 2:5:707:fffffffc
    [ 29.911154] hda-codec: out of range cmd 2:5:707:fffffffc
    [ 29.916107] hda-codec: out of range cmd 2:5:707:fffffffc
    [ 29.917361] hda-codec: out of range cmd 3:5:707:fffffffc
    [ 29.922792] hda-codec: out of range cmd 3:5:707:fffffffc
    [ 29.924372] hda-codec: out of range cmd 3:5:707:fffffffc
    [ 29.929456] hda-codec: out of range cmd 3:5:707:fffffffc
    [ 29.932568] hda-codec: out of range cmd 0:5:707:fffffffc
    [ 29.936144] hda-codec: out of range cmd 0:5:707:fffffffc
    [ 85.380415] wlan0: authenticate with 98:fc:11:cb:2b:05
    [ 85.404105] wlan0: send auth to 98:fc:11:cb:2b:05 (try 1/3)
    [ 85.406095] wlan0: authenticated
    [ 85.406496] wlan0: associate with 98:fc:11:cb:2b:05 (try 1/3)
    [ 85.422813] wlan0: RX AssocResp from 98:fc:11:cb:2b:05 (capab=0x431 status=0 aid=4)
    [ 85.422876] wlan0: associated
    [ 85.422901] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    The pacman log is listed here
    [2013-12-27 00:30] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-12-27 00:30] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Starting build: 3.12.6-1-ARCH
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Starting build: 3.12.6-1-ARCH
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-12-27 00:30] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-12-27 00:30] [PACMAN] upgraded linux (3.12.5-1 -> 3.12.6-1)
    Someone experienced a similar issue or could make some sense of this behavior? Otherwise I am tempted to report it to https://bugzilla.kernel.org.
    Best regards,
    ranc0ur
    Last edited by ranc0ur (2013-12-27 00:05:35)

    This is a well known and longstanding issue: going back to at least the 3.7.xx series kernels (UEFI booting). You can search the boards for the various threads dedicated to this (class of) bug{,s}.

  • Random Kernel Panic after upgrade to kernel 2.6.36

    Hello,
    First of all, I apologise if this topic has already come up on the forums, but i've checked and can't see anything specifically relating to the problem im having, and ive also checked the bugs section of Archwiki and can't seem to see anything on there either. I'm not sure what information you guys need so ill just post as much as I can think of in this thread and then if you need any other info, ill post it on request.
    The problem im having relates to a recent system update, which I did sometime within the past 4 weeks or so, after not upgrading for quite a while due to lack of free time.
    In the last update I remember seeing it upgrading the kernel from 2.6.35 to 2.6.36, and since then I have been getting completly random kernel panics, whereby everything freezes. If I have audio output, the sound crashes and everything freezes, and the caps lock and scroll lock lights just flash in sync on the keyboard.
    I have never had any problems like this in all the 7 months that i've been using Arch as a permenant OS.
    Hardware:
    Mobo: ASRock 775Dual-VSTA
    Ram: 2GB (2x 1GB different brand sticks, same specs)
    CPU: Intel Core 2 Duo 1.6GHz
    GFX: Nvidia 8800GT 512MB
    Plug and Play hardware that is normally always connected:
    1. Zoom Wireless Dongle (4410b chipset, using ndiswrapper and the Zoom windows driver)
    2. Digital TV Stick (Artec T1) with specific firmware and using MeTV as a viewer.
    I've looked in all of the logs, including: dmesg, everything.log, daemon.log, errors.log, messages.log and all the other logs. But there is very little information relating to the crash in there. I'm guessing this is because its a kernel panic so it doesn't have chance to dump anything into the logs before it all crashes? If needs be I can post whichever logs you think will be most useful, but i'm using my laptop at the minute so I wont get chance to post them until tomorrow evening.
    I've also tried enabling the testing repos and upgraded to kernel 2.6.37-1 to see if this suspected bug is fixed, but the panic seems to happen the same, if not more with kernel 2.6.37-1. At the minute I've rolled my system back to kernel 2.6.36 because it seemed a little more stable.
    It doesn't just crash when your in the X server either. Theres been a few times when i've had a kernel panic during boot. Sometimes a couple of seconds after it starts to boot into Arch. And sometimes just as its processing the Udev events. But as I say it seems completely random rather than relating to specific events.
    During one of the crashes at boot I got an error message on the screen which read:
    Setting Latency Timer to 64
    HDA Intel 0000:80:01.0: PCI: disallowing DAC for device
    [<c131621b>] ? error_code+0x67/0x6c
    Thats as much as I can think of at the minute. As I say, if you need any more information or need me to paste my log files then let me know and i will do that tomorrow.
    Thanks in advance for the help, its much appreciated.
    Scott.
    Last edited by ScottWilson1990 (2011-01-10 01:18:26)

    Hi Daniel,
    I'm just guessing that its a kenel panic, as when it happens both the caps lock and scroll lock lights flash in sync, which is a sign of kernel panic isn't it?
    My cpu is i686.
    I've just read that post and i've downgraded udev to 164-3 to see if this solves the problem as some people have said in that post, although others later on in the thread say that this doesn't solve it for them. This morning it took me 4 restarts just to get arch to boot without the panic. I took a picture of the screen during the panic which ill post after work this evening, it looks pretty similar to the picture posted by "rabid_works" in the thread you pasted. I'm not sure about your post in the other threat that relates to the errors in the Oops report, could you clarify this so I can see if the problems reported in that thread are what I am experiencing?.
    In the meantime, here is my pacman.log from 26.12.10 when I did the upgrade and the problems started. (note I have done upgrades following 26.12.10 to see if anything fixed the problem but with no luck, that is why the log is so long and I don't have any hosting anymore, so i've had to post it in quotes, I apologise).
    [2010-12-26 15:13] Running 'pacman -Sy'
    [2010-12-26 15:13] synchronizing package lists
    [2010-12-26 15:14] Running 'pacman -Syu'
    [2010-12-26 15:14] synchronizing package lists
    [2010-12-26 15:14] starting full system upgrade
    [2010-12-26 15:35] Running 'pacman -Syu'
    [2010-12-26 15:35] synchronizing package lists
    [2010-12-26 15:35] starting full system upgrade
    [2010-12-26 16:45] removed libusb1 (1.0.8-1)
    [2010-12-26 16:45] removed pycairo (1.8.10-2)
    [2010-12-26 16:45] removed python-numpy (1.5.0-2)
    [2010-12-26 16:45] upgraded gnome-menus (2.30.4-2 -> 2.30.5-1)
    [2010-12-26 16:45] upgraded gnome-desktop (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:45] upgraded tzdata (2010n-1 -> 2010o-1)
    [2010-12-26 16:45] Generating locales...
    [2010-12-26 16:45]   en_GB.UTF-8... done
    [2010-12-26 16:45]   en_US.UTF-8... done
    [2010-12-26 16:46]   en_US.ISO-8859-1... done
    [2010-12-26 16:46] Generation complete.
    [2010-12-26 16:46] upgraded glibc (2.12.1-3 -> 2.12.1-4)
    [2010-12-26 16:46] upgraded gcc-libs (4.5.1-1 -> 4.5.1-2)
    [2010-12-26 16:46] upgraded pcre (8.10-1 -> 8.11-1)
    [2010-12-26 16:46] upgraded glib2 (2.26.0-2 -> 2.26.1-1)
    [2010-12-26 16:46] upgraded zlib (1.2.5-2 -> 1.2.5-3)
    [2010-12-26 16:46] upgraded ncurses (5.7-3 -> 5.7-4)
    [2010-12-26 16:46] upgraded readline (6.1.002-1 -> 6.1.002-2)
    [2010-12-26 16:46] upgraded libxml2 (2.7.7-2 -> 2.7.8-1)
    [2010-12-26 16:46] upgraded bash (4.1.009-1 -> 4.1.009-3)
    [2010-12-26 16:46] upgraded findutils (4.4.2-2 -> 4.4.2-3)
    [2010-12-26 16:46] upgraded gzip (1.4-1 -> 1.4-2)
    [2010-12-26 16:46] upgraded texinfo (4.13a-4 -> 4.13a-5)
    [2010-12-26 16:46] upgraded libtasn1 (2.6-1 -> 2.8-1)
    [2010-12-26 16:46] upgraded gnutls (2.8.6-1 -> 2.10.4-1)
    [2010-12-26 16:46] upgraded libsoup (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:46] upgraded db (5.1.19-2 -> 5.1.19-3)
    [2010-12-26 16:46] upgraded openssl (1.0.0.a-3 -> 1.0.0.c-1)
    [2010-12-26 16:46] upgraded sqlite3 (3.7.3-1 -> 3.7.4-1)
    [2010-12-26 16:46] upgraded heimdal (1.3.3-2 -> 1.3.3-4)
    [2010-12-26 16:46] upgraded evolution-data-server (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded inputproto (2.0-1 -> 2.0.1-1)
    [2010-12-26 16:46] upgraded libxi (1.3.2-1 -> 1.4.0-1)
    [2010-12-26 16:46] upgraded libpng (1.4.4-1 -> 1.4.5-1)
    [2010-12-26 16:46] upgraded expat (2.0.1-5 -> 2.0.1-6)
    [2010-12-26 16:46] upgraded xproto (7.0.18-1 -> 7.0.20-1)
    [2010-12-26 16:46] upgraded libx11 (1.3.5-1 -> 1.4.0-1)
    [2010-12-26 16:46] upgraded attr (2.4.44-1 -> 2.4.44-2)
    [2010-12-26 16:46] upgraded libcap (2.19-1 -> 2.19-2)
    [2010-12-26 16:46] upgraded coreutils (8.6-1 -> 8.7-1)
    [2010-12-26 16:46] warning: /etc/hosts installed as /etc/hosts.pacnew
    [2010-12-26 16:46] warning: /etc/gshadow installed as /etc/gshadow.pacnew
    [2010-12-26 16:46] upgraded filesystem (2010.10-1 -> 2010.12-1)
    [2010-12-26 16:46] upgraded dbus-core (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:46] upgraded dbus (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:46] upgraded avahi (0.6.27-7 -> 0.6.28-1)
    [2010-12-26 16:46] upgraded libcups (1.4.4-3 -> 1.4.5-2)
    [2010-12-26 16:46] upgraded gdk-pixbuf2 (2.22.0-2 -> 2.22.1-1)
    [2010-12-26 16:46] upgraded gtk2 (2.22.0-5 -> 2.22.1-1)
    [2010-12-26 16:46] upgraded librsvg (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded libogg (1.2.0-1 -> 1.2.2-1)
    [2010-12-26 16:46] upgraded libvorbis (1.3.1-1 -> 1.3.2-1)
    [2010-12-26 16:46] upgraded gstreamer0.10 (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded libcanberra (0.25-1 -> 0.26-3)
    [2010-12-26 16:46] upgraded libwnck (2.30.5-1 -> 2.30.6-1)
    [2010-12-26 16:46] upgraded gnome-panel (2.32.0.2-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded alacarte (0.13.2-2 -> 0.13.2-3)
    [2010-12-26 16:46] upgraded alsa-utils (1.0.23-2 -> 1.0.23-3)
    [2010-12-26 16:46] upgraded amsn (0.98.3-4 -> 0.98.4-1)
    [2010-12-26 16:46] upgraded libusb (0.1.12-4 -> 1.0.8-1)
    [2010-12-26 16:46] installed libusb-compat (0.1.3-1)
    [2010-12-26 16:46] upgraded ardour (2.8.11-1 -> 2.8.11-2)
    [2010-12-26 16:46] upgraded automake (1.11.1-1 -> 1.11.1-2)
    [2010-12-26 16:46] upgraded bluez (4.77-1 -> 4.82-1)
    [2010-12-26 16:46] upgraded boost-libs (1.43.0-2 -> 1.45.0-1)
    [2010-12-26 16:46] upgraded orc (0.4.7-1 -> 0.4.11-1)
    [2010-12-26 16:46] upgraded udev (163-1 -> 164-3)
    [2010-12-26 16:46] upgraded gstreamer0.10-base (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded gstreamer0.10-base-plugins (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded file (5.04-2 -> 5.04-3)
    [2010-12-26 16:46] upgraded cdrkit (1.1.10-1 -> 1.1.11-1)
    [2010-12-26 16:46] upgraded libao (1.0.0-2 -> 1.0.0-5)
    [2010-12-26 16:46] upgraded cdrdao (1.2.3-4 -> 1.2.3-5)
    [2010-12-26 16:46] upgraded brasero (2.32.0-3 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded run-parts (3.2.3-1 -> 3.4.1-1)
    [2010-12-26 16:46] upgraded sed (4.2.1-2 -> 4.2.1-3)
    [2010-12-26 16:46] Clearing symlinks in /etc/ssl/certs...done.
    [2010-12-26 16:46] Updating certificates in /etc/ssl/certs... 141 added, 0 removed; done.
    [2010-12-26 16:46] Running hooks in /etc/ca-certificates/update.d....
    [2010-12-26 16:46] updating keystore /etc/ssl/certs/java/cacerts...
    [2010-12-26 16:46]   added: /etc/ssl/certs/brasil.gov.br.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cacert.org.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/ca.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cert_igca_dsa.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cert_igca_rsa.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AOL_Time_Warner_Root_Certification_Authority_1.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AOL_Time_Warner_Root_Certification_Authority_2.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_External_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Low-Value_Services_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Public_Services_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Qualified_Certificates_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/America_Online_Root_Certification_Authority_1.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/America_Online_Root_Certification_Authority_2.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Baltimore_CyberTrust_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/COMODO_Certification_Authority.pem
    [2010-12-26 16:46]   ignored import, signature not available: /etc/ssl/certs/COMODO_ECC_Certification_Authority.pem
    [2010-12-26 16:46] keytool error: java.security.NoSuchAlgorithmException: SHA384withECDSA Signature not available
    [2010-12-26 16:46]   added: /etc/ssl/certs/Camerfirma_Chambers_of_Commerce_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Camerfirma_Global_Chambersign_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Certplus_Class_2_Primary_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Certum_Root_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Comodo_AAA_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Comodo_Secure_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Comodo_Trusted_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DST_ACES_CA_X6.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DST_Root_CA_X3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_Assured_ID_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_Global_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_High_Assurance_EV_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiNotar_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_4.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Global_Secure_Personal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Global_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Premium_2048_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Secure_Personal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust_Root_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_Global_eBusiness_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_eBusiness_CA_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_eBusiness_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Firmaprofesional_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GTE_CyberTrust_Global_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GTE_CyberTrust_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Global_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Global_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Primary_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Universal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Universal_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GlobalSign_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GlobalSign_Root_CA_-_R2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Go_Daddy_Class_2_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASE1_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASE3_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASEA1_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASEA3_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Chained_CAs_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Servidores_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Timestamping_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Business_=Class_B=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Express_=Class_C=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Notary_=Class_A=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Qualified_=Class_QA=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Network_Solutions_Certificate_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA_3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Root_Certificate_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Security_1024_v3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Security_2048_v3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/SecureTrust_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Secure_Global_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Security_Communication_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Sonera_Class_1_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Sonera_Class_2_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Staat_der_Nederlanden_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Starfield_Class_2_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/StartCom_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/StartCom_Ltd..pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Gold_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Platinum_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Silver_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Swisscom_Root_CA_1.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TC_TrustCenter__Germany__Class_2_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TC_TrustCenter__Germany__Class_3_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TDC_Internet_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TDC_OCES_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TURKTRUST_Certificate_Services_Provider_Root_1.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TURKTRUST_Certificate_Services_Provider_Root_2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Taiwan_GRCA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Basic_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Freemail_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Premium_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Premium_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Time_Stamping_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN-USER_First-Network_Applications.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_DATACorp_SGC_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_USERFirst_Email_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_USERFirst_Hardware_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/ValiCert_Class_1_VA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/ValiCert_Class_2_VA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_RSA_Secure_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Time_Stamping_Authority_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Visa_International_Global_Root_2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Visa_eCommerce_Root.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/WellsSecure_Public_Root_Certificate_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Wells_Fargo_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/XRamp_Global_CA_Root.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA-Baltimore_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA_-_Entrust_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA_-_RSA_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/thawte_Primary_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/signet_ca1_pem.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/signet_ca2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ca3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ocspklasa2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ocspklasa3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_pca2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_pca3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_rootca_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_tsa1_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/spi-ca-2003.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/spi-cacert-2008.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/deutsche-telekom-root-ca-2.pem
    [2010-12-26 16:49] done.
    [2010-12-26 16:49] done.
    [2010-12-26 16:49] upgraded ca-certificates (20090814-3 -> 20090814+nmu2-1)
    [2010-12-26 16:49] upgraded ca-certificates-java (20090629-2 -> 20100412-2)
    [2010-12-26 16:49] upgraded cairomm (1.8.4-1 -> 1.8.6-1)
    [2010-12-26 16:49] upgraded curl (7.21.2-2 -> 7.21.3-1)
    [2010-12-26 16:49] upgraded dbus-glib (0.86-1 -> 0.92-1)
    [2010-12-26 16:49] upgraded python2 (2.7-3 -> 2.7.1-3)
    [2010-12-26 16:49] upgraded libtorrent-rasterbar (0.15.4-2 -> 0.15.4-3)
    [2010-12-26 16:49] upgraded twisted (10.1.0-1 -> 10.2.0-1)
    [2010-12-26 16:49] installed python2-chardet (2.0.1-3)
    [2010-12-26 16:49] >>> Deluge's daemon is running default with the "deluge" user. The default download directory is /srv/deluge/.
    [2010-12-26 16:49]     You can change the user by editing /etc/conf.d/deluged
    [2010-12-26 16:49] upgraded deluge (1.3.1-1 -> 1.3.1-2)
    [2010-12-26 16:49] upgraded device-mapper (2.02.75-1 -> 2.02.78-1)
    [2010-12-26 16:49] upgraded dhcpcd (5.2.8-1 -> 5.2.9-1)
    [2010-12-26 16:49] upgraded diffutils (3.0-1 -> 3.0-2)
    [2010-12-26 16:49] upgraded dnsutils (9.7.1.P2-1 -> 9.7.2.P3-1)
    [2010-12-26 16:49] upgraded eog (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded ethtool (6-2 -> 2.6.35-2)
    [2010-12-26 16:49] upgraded fakeroot (1.14.4-2 -> 1.14.5-1)
    [2010-12-26 16:49] upgraded feh (1.10-1 -> 1.10.1-1)
    [2010-12-26 16:49] upgraded sdl (1.2.14-5 -> 1.2.14-6)
    [2010-12-26 16:49] upgraded schroedinger (1.0.9-1 -> 1.0.10-1)
    [2010-12-26 16:49] upgraded libvpx (0.9.5-1 -> 0.9.5-2)
    [2010-12-26 16:49] upgraded libdrm (2.4.21-2 -> 2.4.22-3)
    [2010-12-26 16:49] upgraded pixman (0.18.4-1 -> 0.20.0-1)
    [2010-12-26 16:49] upgraded xorg-server-common (1.9.2-1 -> 1.9.2-2)
    [2010-12-26 16:49] upgraded xorg-server (1.9.2-1 -> 1.9.2-2)
    [2010-12-26 16:49] upgraded nvidia-utils (260.19.12-1 -> 260.19.29-1)
    [2010-12-26 16:49] upgraded libva (1.0.5-2 -> 1.0.6-1)
    [2010-12-26 16:49] upgraded ffmpeg (25472-1 -> 25679-1)
    [2010-12-26 16:49] upgraded file-roller (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded xulrunner (1.9.2.12-1 -> 1.9.2.13-2)
    [2010-12-26 16:49] upgraded firefox (3.6.12-1 -> 3.6.13-1)
    [2010-12-26 16:49] upgraded flashplugin (10.1.85.3-1 -> 10.1.102.65-1)
    [2010-12-26 16:49] installed libasyncns (0.8-3)
    [2010-12-26 16:49] installed libpulse (0.9.22-2)
    [2010-12-26 16:49] upgraded fluidsynth (1.1.3-1 -> 1.1.3-2)
    [2010-12-26 16:49] upgraded freetype2 (2.4.3-1 -> 2.4.4-1)
    [2010-12-26 16:49] upgraded gawk (3.1.8-1 -> 3.1.8-2)
    [2010-12-26 16:49] upgraded gcalctool (5.32.0-2 -> 5.32.2-1)
    [2010-12-26 16:49] upgraded gcc (4.5.1-1 -> 4.5.1-2)
    [2010-12-26 16:49] upgraded gen-init-cpio (2.6.32-1 -> 2.6.36-1)
    [2010-12-26 16:49] upgraded ghostscript (9.00-1 -> 9.00-2)
    [2010-12-26 16:49] upgraded gmime (2.4.19-1 -> 2.4.21-1)
    [2010-12-26 16:49] upgraded gucharmap (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded libnotify (0.4.5-1.1 -> 0.5.2-1)
    [2010-12-26 16:50] upgraded gnome-applets (2.32.0-3 -> 2.32.1.1-1)
    [2010-12-26 16:50] installed libgnome-data (2.32.0-3)
    [2010-12-26 16:50] upgraded gnome-settings-daemon (2.32.0-1 -> 2.32.1-2)
    [2010-12-26 16:50] upgraded gnome-control-center (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] installed python2-gconf (2.28.1-5)
    [2010-12-26 16:50] upgraded gnome-games (2.32.0-3 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-good (0.10.24-1 -> 0.10.26-1)
    [2010-12-26 16:50] upgraded libsoup-gnome (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-good-plugins (0.10.24-1 -> 0.10.26-1)
    [2010-12-26 16:50] upgraded gnome-media (2.32.0-1 -> 2.32.0-2)
    [2010-12-26 16:50] upgraded gnome-panel-bonobo (2.32.0.2-2 -> 2.32.1-1)
    [2010-12-26 16:50] installed python2-bonobo (2.28.1-5)
    [2010-12-26 16:50] installed python2-libgnome (2.28.1-5)
    [2010-12-26 16:50] installed python2-gnomecanvas (2.28.1-5)
    [2010-12-26 16:50] installed python2-gnomevfs (2.28.1-5)
    [2010-12-26 16:50] upgraded gnome-python (2.28.1-3 -> 2.28.1-5)
    [2010-12-26 16:50] upgraded polkit (0.98-1 -> 0.99-1)
    [2010-12-26 16:50] upgraded procps (3.2.8-1 -> 3.2.8-3)
    [2010-12-26 16:50] upgraded pm-utils (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:50] upgraded upower (0.9.6-0.20100929 -> 0.9.7-2)
    [2010-12-26 16:50] upgraded polkit-gnome (0.97-1 -> 0.99-1)
    [2010-12-26 16:50] upgraded gnome-session (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded vte (0.26.1-1 -> 0.26.2-1)
    [2010-12-26 16:50] upgraded gnome-terminal (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gnome-themes (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gnupg (1.4.11-1 -> 1.4.11-2)
    [2010-12-26 16:50] upgraded gnupg2 (2.0.16-2 -> 2.0.16-3)
    [2010-12-26 16:50] installed atkmm (2.22.1-1)
    [2010-12-26 16:50] upgraded gtkmm (2.20.3-1 -> 2.22.0-1)
    [2010-12-26 16:50] upgraded gparted (0.7.0-1 -> 0.7.1-1)
    [2010-12-26 16:50] upgraded gpm (1.20.6-5 -> 1.20.6-6)
    [2010-12-26 16:50] upgraded gstreamer0.10-bad (0.10.19-1 -> 0.10.20-1)
    [2010-12-26 16:50] upgraded libdc1394 (2.1.2-1 -> 2.1.2-2)
    [2010-12-26 16:50] installed gsm (1.0.13-6)
    [2010-12-26 16:50] installed rtmpdump (2.3-3)
    [2010-12-26 16:50] installed libgme (0.5.5-3)
    [2010-12-26 16:50] upgraded gstreamer0.10-bad-plugins (0.10.19-1 -> 0.10.20-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ffmpeg (0.10.10-1 -> 0.10.11-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ugly (0.10.15-5 -> 0.10.16-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ugly-plugins (0.10.15-5 -> 0.10.16-1)
    [2010-12-26 16:50] upgraded gtk-engine-murrine (0.98.1.1-1 -> 0.98.1.1-2)
    [2010-12-26 16:50] upgraded gtk-vnc (0.3.10-2 -> 0.4.2-2)
    [2010-12-26 16:50] upgraded gvfs (1.6.5-2 -> 1.6.6-1)
    [2010-12-26 16:50] upgraded usbutils (0.90-1 -> 0.91-4)
    [2010-12-26 16:50] upgraded hal (0.5.14-4 -> 0.5.14-5)
    [2010-12-26 16:50] upgraded hyphen (2.6-1 -> 2.7.1-1)
    [2010-12-26 16:50] upgraded icu (4.4.2-1 -> 4.6-1)
    [2010-12-26 16:50] upgraded inetutils (1.8-1 -> 1.8-2)
    [2010-12-26 16:50] upgraded initscripts (2010.07-1 -> 2010.07-2)
    [2010-12-26 16:50] upgraded iptables (1.4.9-1 -> 1.4.10-1)
    [2010-12-26 16:50] upgraded ipw2100-fw (1.3-4 -> 1.3-5)
    [2010-12-26 16:50] upgraded ipw2200-fw (3.1-2 -> 3.1-3)
    [2010-12-26 16:50] upgraded isdn4k-utils (3.2p1-5 -> 3.2p1-6)
    [2010-12-26 16:50] upgraded jfsutils (1.1.14-1 -> 1.1.14-2)
    [2010-12-26 16:50] upgraded linux-firmware (20100911-1 -> 20101108-1)
    [2010-12-26 16:50] >>> Updating module dependencies. Please wait ...
    [2010-12-26 16:50] >>> MKINITCPIO SETUP
    [2010-12-26 16:50] >>> ----------------
    [2010-12-26 16:50] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-12-26 16:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2010-12-26 16:50] >>> More information about mkinitcpio setup can be found here:
    [2010-12-26 16:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-12-26 16:50]
    [2010-12-26 16:50] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2010-12-26 16:50] ==> Building image "default"
    [2010-12-26 16:50] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-12-26 16:50] :: Begin build
    [2010-12-26 16:50] :: Parsing hook [base]
    [2010-12-26 16:50] :: Parsing hook [udev]
    [2010-12-26 16:50] :: Parsing hook [autodetect]
    [2010-12-26 16:50] :: Parsing hook [pata]
    [2010-12-26 16:50] :: Parsing hook [scsi]
    [2010-12-26 16:51] :: Parsing hook [sata]
    [2010-12-26 16:51] :: Parsing hook [filesystems]
    [2010-12-26 16:51] :: Generating module dependencies
    [2010-12-26 16:51] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-12-26 16:51] ==> SUCCESS
    [2010-12-26 16:51] ==> Building image "fallback"
    [2010-12-26 16:51] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-12-26 16:51] :: Begin build
    [2010-12-26 16:51] :: Parsing hook [base]
    [2010-12-26 16:51] :: Parsing hook [udev]
    [2010-12-26 16:51] :: Parsing hook [pata]
    [2010-12-26 16:51] :: Parsing hook [scsi]
    [2010-12-26 16:51] :: Parsing hook [sata]
    [2010-12-26 16:51] :: Parsing hook [filesystems]
    [2010-12-26 16:51] :: Generating module dependencies
    [2010-12-26 16:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-12-26 16:51] ==> SUCCESS
    [2010-12-26 16:51] upgraded kernel26 (2.6.35.8-1 -> 2.6.36.2-1)
    [2010-12-26 16:51] upgraded less (436-1 -> 436-2)
    [2010-12-26 16:51] upgraded libdvdcss (1.2.10-1.1 -> 1.2.10-2)
    [2010-12-26 16:51] upgraded libgnome (2.32.0-1 -> 2.32.0-3)
    [2010-12-26 16:51] upgraded libgssglue (0.1-2 -> 0.1-3)
    [2010-12-26 16:51] upgraded libmpdclient (2.2-1 -> 2.3-1)
    [2010-12-26 16:51] upgraded libmtp (1.0.2-1 -> 1.0.2-2)
    [2010-12-26 16:51] upgraded libpcap (1.1.1-1 -> 1.1.1-2)
    [2010-12-26 16:51] upgraded libpurple (2.7.5-1 -> 2.7.8-1)
    [2010-12-26 16:51] upgraded libwebkit (1.2.5-1 -> 1.2.5-2)
    [2010-12-26 16:51] upgraded libwpd (0.8.14-1 -> 0.9.0-1)
    [2010-12-26 16:51] upgraded lvm2 (2.02.75-1 -> 2.02.78-1)
    [2010-12-26 16:51] upgraded lzo2 (2.03-1 -> 2.04-1)
    [2010-12-26 16:51] upgraded man-db (2.5.7-1 -> 2.5.9-1)
    [2010-12-26 16:51] upgraded man-pages (3.29-1 -> 3.32-1)
    [2010-12-26 16:51] upgraded me-tv (1.3.4-1 -> 1.3.5-1)
    [2010-12-26 16:51] upgraded mesa (7.8.2-3 -> 7.9.0.git20101207-2)
    [2010-12-26 16:51] upgraded mousetweaks (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:51] upgraded mpd (0.15.13-1 -> 0.16-2)
    [2010-12-26 16:51] upgraded mpfr (3.0.0.p4-1 -> 3.0.0.p8-1)
    [2010-12-26 16:52] upgraded nano (2.2.5-1 -> 2.2.6-1)
    [2010-12-26 16:52] upgraded nautilus (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:52] module configuration already contains alias directive
    [2010-12-26 16:52]
    [2010-12-26 16:52] upgraded ndiswrapper (1.56-5 -> 1.56-6)
    [2010-12-26 16:52] upgraded wireless_tools (29-3 -> 29-4)
    [2010-12-26 16:52] warning: directory permissions differ on var/lib/NetworkManager/
    filesystem: 755  package: 700
    [2010-12-26 16:52] ATTENTION:
    [2010-12-26 16:52]   /etc/NetworkManager/nm-system-settings.conf has been replaced
    [2010-12-26 16:52]   by /etc/NetworkManager/NetworkManager.conf. Make sure you move
    [2010-12-26 16:52]   any custom settings to the new config file.
    [2010-12-26 16:52] upgraded networkmanager (0.8.1-1 -> 0.8.3-0.20101130)
    [2010-12-26 16:52] upgraded network-manager-applet (0.8.1-2 -> 0.8.2-2)
    [2010-12-26 16:52] upgraded nfsidmap (0.23-3 -> 0.23-4)
    [2010-12-26 16:52] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2010-12-26 16:52] upgraded nvidia (260.19.12-1 -> 260.19.29-1)
    [2010-12-26 16:52] when you use a non-reparenting window manager
    [2010-12-26 16:52] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2010-12-26 16:52] /etc/profile.d/openjdk6.sh
    [2010-12-26 16:52] upgraded openjdk6 (6.b20_1.9.1-1 -> 6.b20_1.9.3-1)
    [2010-12-26 16:52] upgraded raptor (1.4.21-1 -> 1.4.21-2)
    [2010-12-26 16:52] upgraded rasqal (0.9.20-1 -> 0.9.21-1)
    [2010-12-26 16:52] upgraded redland (1.0.12-2 -> 1.0.12-3)
    [2010-12-26 16:52]  * check /etc/profile.d/openoffice.sh, then relogin or "source" the file
    [2010-12-26 16:52]  * see http://wiki.archlinux.org/index.php/Openoffice
    [2010-12-26 16:52]    how to use extensions, e.g. for spell checking
    [2010-12-26 16:52]    see /usr/lib/openoffice/share/extension/install what
    [2010-12-26 16:52]    is shipped with this package
    [2010-12-26 16:52]  * make sure you have installed a ttf font (ttf-dejavu recommended)
    [2010-12-26 16:52] upgraded openoffice-base (3.2.1-3 -> 3.2.1-4)
    [2010-12-26 16:52] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2010-12-26 16:52] upgraded pacman-mirrorlist (20100825-1 -> 20101223-1)
    [2010-12-26 16:52] upgraded patch (2.6.1-1 -> 2.6.1-2)
    [2010-12-26 16:52] upgraded perl-xml-parser (2.36-7 -> 2.40-1)
    [2010-12-26 16:52] upgraded pidgin (2.7.5-1 -> 2.7.8-1)
    [2010-12-26 16:52] upgraded pilot-link (0.12.5-1 -> 0.12.5-2)
    [2010-12-26 16:52] upgraded pkg-config (0.25-2 -> 0.25-3)
    [2010-12-26 16:52] upgraded poppler-data (0.4.3-1 -> 0.4.4-1)
    [2010-12-26 16:52] upgraded poppler (0.14.4-1 -> 0.14.5-1)
    [2010-12-26 16:52] upgraded poppler-glib (0.14.4-1 -> 0.14.5-1)
    [2010-12-26 16:52] upgraded postgresql-libs (9.0.1-2 -> 9.0.2-2)
    [2010-12-26 16:52] installed python2-cairo (1.8.10-1)
    [2010-12-26 16:52] upgraded python (3.1.2-2 -> 3.1.3-1)
    [2010-12-26 16:52] upgraded python-chardet (2.0.1-2 -> 2.0.1-3)
    [2010-12-26 16:52] installed python2-numpy (1.5.1-1)
    [2010-12-26 16:52] upgraded qt (4.7.0-4 -> 4.7.1-3)
    [2010-12-26 16:52] upgraded recode (3.6-5 -> 3.6-6)
    [2010-12-26 16:52] upgraded reiserfsprogs (3.6.21-2 -> 3.6.21-3)
    [2010-12-26 16:52] upgraded rpcbind (0.2.0-2 -> 0.2.0-3)
    [2010-12-26 16:52] upgraded smbclient (3.5.5-1 -> 3.5.6-1)
    [2010-12-26 16:52] upgraded syslog-ng (3.1.2-1 -> 3.2.1-1)
    [2010-12-26 16:52] upgraded tar (1.23-3 -> 1.25-1)
    [2010-12-26 16:52] upgraded telepathy-glib (0.12.3-1 -> 0.12.7-1)
    [2010-12-26 16:53] upgraded ttf-dejavu (2.30-2 -> 2.32-2)
    [2010-12-26 16:53] upgraded udisks (1.0.1-5 -> 1.0.2-1)
    [2010-12-26 16:53] upgraded unrar (3.9.10-1 -> 4.0.3-1)
    [2010-12-26 16:53] upgraded vino (2.32.0-1 -> 2.32.0-2)
    [2010-12-26 16:53] upgraded zvbi (0.2.33-2 -> 0.2.33-3)
    [2010-12-26 16:53] upgraded vlc (1.1.4.1-2 -> 1.1.5-2)
    [2010-12-26 16:53] upgraded warsow-data (0.5-4 -> 0.6-1)
    [2010-12-26 16:53] upgraded warsow (0.5-4 -> 0.6-3)
    [2010-12-26 16:53] upgraded which (2.20-3 -> 2.20-4)
    [2010-12-26 16:53] upgraded whois (5.0.7-1 -> 5.0.10-1)
    [2010-12-26 16:53] upgraded wireless-regdb (2009.11.25-1 -> 2010.11.24-1)
    [2010-12-26 16:53] upgraded xbitmaps (1.1.0-1 -> 1.1.1-1)
    [2010-12-26 16:53] upgraded xfsprogs (3.1.3-1 -> 3.1.4-1)
    [2010-12-26 16:53] upgraded xinetd (2.3.14-5 -> 2.3.14-6)
    [2010-12-26 16:53] upgraded xorg-docs (1.5-1 -> 1.6-1)
    [2010-12-26 16:53] upgraded xorg-iceauth (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] installed xorg-xdpyinfo (1.2.0-1)
    [2010-12-26 16:53] installed xorg-xdriinfo (1.0.4-1)
    [2010-12-26 16:53] installed xorg-xev (1.1.0-1)
    [2010-12-26 16:53] installed xorg-xlsatoms (1.1.0-1)
    [2010-12-26 16:53] installed xorg-xlsclients (1.1.1-1)
    [2010-12-26 16:53] installed xorg-xprop (1.2.0-1)
    [2010-12-26 16:53] installed xorg-xvinfo (1.1.1-1)
    [2010-12-26 16:53] installed xorg-xwininfo (1.1.1-1)
    [2010-12-26 16:53] upgraded xorg-utils (7.6-5 -> 7.6-6)
    [2010-12-26 16:53] upgraded xorg-xauth (1.0.4-1 -> 1.0.5-1)
    [2010-12-26 16:53] upgraded xorg-xbacklight (1.1.1-1 -> 1.1.2-1)
    [2010-12-26 16:53] upgraded xorg-xgamma (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xhost (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xinit (1.2.1-1 -> 1.3.0-2)
    [2010-12-26 16:53] upgraded xorg-xinput (1.5.2-1 -> 1.5.3-1)
    [2010-12-26 16:53] upgraded xorg-xkill (1.0.2-1 -> 1.0.3-1)
    [2010-12-26 16:53] upgraded xorg-xrandr (1.3.3-1 -> 1.3.4-1)
    [2010-12-26 16:53] upgraded xorg-xrdb (1.0.6-1 -> 1.0.7-1)
    [2010-12-26 16:53] upgraded xorg-xrefresh (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xset (1.2.0-1 -> 1.2.1-1)
    [2010-12-26 16:53] upgraded xorg-xsetroot (1.0.3-1 -> 1.1.0-1)
    [2010-12-26 16:53] upgraded xorg-xwd (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xwud (1.0.2-1 -> 1.0.3-1)
    [2010-12-26 16:53] upgraded xterm (266-1 -> 267-1)
    [2010-12-26 16:53] upgraded zenity (2.32.0-1 -> 2.32.1-1)
    [2010-12-28 17:36] Running 'pacman -Stu'
    [2010-12-28 17:36] starting full system upgrade
    [2010-12-28 17:36] Running 'pacman -Syu'
    [2010-12-28 17:36] synchronizing package lists
    [2010-12-28 17:36] starting full system upgrade
    [2010-12-28 17:37] upgraded libpurple (2.7.8-1 -> 2.7.9-1)
    [2010-12-28 17:37] upgraded pidgin (2.7.8-1 -> 2.7.9-1)
    [2010-12-29 23:49] Running 'pacman -S openntp'
    [2010-12-29 23:49] Running 'pacman -S openntpd'
    [2010-12-29 23:49] adding new group: ntp
    [2010-12-29 23:49] adding new user: ntp
    [2010-12-29 23:49] installed openntpd (3.9p1-13)
    [2010-12-31 17:57] Running 'pacman -Syu'
    [2010-12-31 17:57] synchronizing package lists
    [2010-12-31 17:57] starting full system upgrade
    [2010-12-31 18:03] upgraded linux-api-headers (2.6.34-1 -> 2.6.36.2-1)
    [2010-12-31 18:03] Generating locales...
    [2010-12-31 18:03]   en_GB.UTF-8... done
    [2010-12-31 18:03]   en_US.UTF-8... done
    [2010-12-31 18:03]   en_US.ISO-8859-1... done
    [2010-12-31 18:03] Generation complete.
    [2010-12-31 18:03] upgraded glibc (2.12.1-4 -> 2.12.2-1)
    [2010-12-31 18:03] upgraded binutils (2.20.1-4 -> 2.21-2)
    [2010-12-31 18:03] upgraded gcc (4.5.1-2 -> 4.5.2-3)
    [2010-12-31 18:03] upgraded gcc-libs (4.5.1-2 -> 4.5.2-3)
    [2010-12-31 18:03] upgraded hyphen (2.7.1-1 -> 2.7.1-2)
    [2010-12-31 18:03] upgraded libwebkit (1.2.5-2 -> 1.2.6-1)
    [2010-12-31 18:03] upgraded nautilus (2.32.2-1 -> 2.32.2.1-1)
    [2010-12-31 18:03] upgraded twisted (10.2.0-1 -> 10.2.0-2)
    [2010-12-31 18:03] upgraded xulrunner (1.9.2.13-2 -> 1.9.2.13-3)
    [2011-01-01 00:31] Running 'pacman -S dhcpcd'
    [2011-01-01 00:35] Running 'pacman -Rns dhcpcd'
    [2011-01-01 00:36] Running 'pacman -Rns networkmanager'
    [2011-01-01 00:36] Running 'pacman -Rns network-manager-applet'
    [2011-01-01 00:36] removed network-manager-applet (0.8.2-2)
    [2011-01-01 00:36] removed mobile-broadband-provider-info (20100510-1)
    [2011-01-01 00:36] Running 'pacman -Rns networkmanager'
    [2011-01-01 00:36] removed networkmanager (0.8.3-0.20101130)
    [2011-01-01 00:36] Running 'pacman -Rns netcfg'
    [2011-01-01 00:36] removed netcfg (2.5.4-1)
    [2011-01-07 19:27] Running 'pacman -Syu'
    [2011-01-07 19:27] synchronizing package lists
    [2011-01-07 19:28] upgraded pacman (3.4.1-1 -> 3.4.2-1)
    [2011-01-07 19:28] Running 'pacman -Syu'
    [2011-01-07 19:28] synchronizing package lists
    [2011-01-07 19:28] starting full system upgrade
    [2011-01-07 19:34] upgraded atkmm (2.22.1-1 -> 2.22.1-2)
    [2011-01-07 19:34] upgraded bluez (4.82-1 -> 4.84-1)
    [2011-01-07 19:34] upgraded cairo (1.10.0-2 -> 1.10.2-1)
    [2011-01-07 19:34] upgraded cloog-ppl (0.15.9-2 -> 0.15.10-2)
    [2011-01-07 19:34] upgraded pam (1.1.1-2 -> 1.1.3-1)
    [2011-01-07 19:34] upgraded coreutils (8.7-1 -> 8.8-1)
    [2011-01-07 19:34] upgraded pciutils (3.1.7-1 -> 3.1.7-2)
    [2011-01-07 19:34] upgraded udev (164-3 -> 165-1)
    [2011-01-07 19:34] upgraded device-mapper (2.02.78-1 -> 2.02.79-1)
    [2011-01-07 19:34] upgraded cryptsetup (1.1.3-1 -> 1.2.0-1)
    [2011-01-07 19:34] upgraded e2fsprogs (1.41.12-1 -> 1.41.14-1)
    [2011-01-07 19:34] upgraded elfutils (0.149-2 -> 0.150-1)
    [2011-01-07 19:34] upgraded gcc (4.5.2-3 -> 4.5.2-4)
    [2011-01-07 19:34] upgraded gcc-libs (4.5.2-3 -> 4.5.2-4)
    [2011-01-07 19:34] upgraded gnome-media (2.32.0-2 -> 2.32.0-3)
    [2011-01-07 19:34] upgraded groff (1.20.1-4 -> 1.21-1)
    [2011-01-07 19:34] upgraded hunspell (1.2.12-1 -> 1.2.14-1)
    [2011-01-07 19:34] upgraded libcups (1.4.5-2 -> 1.4.6-1)
    [2011-01-07 19:34] upgraded libmysqlclient (5.1.51-1 -> 5.1.54-1)
    [2011-01-07 19:34] upgraded libtool (2.4-1 -> 2.4-2)
    [2011-01-07 19:34] upgraded lvm2 (2.02.78-1 -> 2.02.79-1)
    [2011-01-07 19:34] upgraded python2 (2.7.1-3 -> 2.7.1-4)
    [2011-01-07 19:34] Updating font cache... done.
    [2011-01-07 19:34] upgraded ttf-freefont (20090104-2 -> 20100919-1)
    [2011-01-08 20:14] Running 'pacman -Sy'
    [2011-01-08 20:14] synchronizing package lists
    [2011-01-08 20:16] Running 'pacman -Sy'
    [2011-01-08 20:16] synchronizing package lists
    [2011-01-08 20:18] Running 'pacman -Sy'
    [2011-01-08 20:18] synchronizing package lists
    [2011-01-08 20:22] Running 'pacman -S kernal26'
    [2011-01-08 20:22] Running 'pacman -S kernel26'
    [2011-01-08 20:25] Running 'pacman -Sn kernel26'
    [2011-01-08 20:26] Running 'pacman -S kernel26 ndiswrapper'
    [2011-01-08 20:26] Running 'pacman -S kernel26 ndiswrapper nvidia'
    [2011-01-08 20:29] >>> Updating module dependencies. Please wait ...
    [2011-01-08 20:29] >>> MKINITCPIO SETUP
    [2011-01-08 20:29] >>> ----------------
    [2011-01-08 20:29] >>> If you use LVM2, Encrypted root or software RAID,
    [2011-01-08 20:29] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2011-01-08 20:29] >>> More information about mkinitcpio setup can be found here:
    [2011-01-08 20:29] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2011-01-08 20:29]
    [2011-01-08 20:29] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2011-01-08 20:29] ==> Building image "default"
    [2011-01-08 20:29] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2011-01-08 20:29] :: Begin build
    [2011-01-08 20:29] :: Parsing hook [base]
    [2011-01-08 20:29] :: Parsing hook [udev]
    [2011-01-08 20:29] :: Parsing hook [autodetect]
    [2011-01-08 20:29] :: Parsing hook [pata]
    [2011-01-08 20:29] :: Parsing hook [scsi]
    [2011-01-08 20:29] :: Parsing hook [sata]
    [2011-01-08 20:29] :: Parsing hook [filesystems]
    [2011-01-08 20:29] :: Generating module dependencies
    [2011-01-08 20:29] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2011-01-08 20:29] ==> SUCCESS
    [2011-01-08 20:29] ==> Building image "fallback"
    [2011-01-08 20:29] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2011-01-08 20:29] :: Begin build
    [2011-01-08 20:29] :: Parsing hook [base]
    [2011-01-08 20:29] :: Parsing hook [udev]
    [2011-01-08 20:29] :: Parsing hook [pata]
    [2011-01-08 20:29] :: Parsing hook [scsi]
    [2011-01-08 20:29] :: Parsing hook [sata]
    [2011-01-08 20:29] :: Parsing hook [filesystems]
    [2011-01-08 20:29] :: Generating module dependencies
    [2011-01-08 20:30] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2011-01-08 20:30] ==> SUCCESS
    [2011-01-08 20:30] upgraded kernel26 (2.6.36.2-1 -> 2.6.37-1)
    [2011-01-08 20:30] module configuration already contains alias directive
    [2011-01-08 20:30]
    [2011-01-08 20:30] upgraded ndiswrapper (1.56-6 -> 1.56-7)
    [2011-01-08 20:30] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2011-01-08 20:30] upgraded nvidia (260.19.29-1 -> 260.19.29-2)
    [2011-01-09 22:54] Running 'pacman -S kernel26 2.6.36.2-1'
    [2011-01-09 22:55] Running 'pacman -S kernel26 2.6.36.2-1'
    [2011-01-09 22:55] Running 'pacman -Rns kernel26 2.6.37-1'
    [2011-01-09 22:57] Running 'pacman -Rns testing/kernel26 2.6.37-1'
    [2011-01-09 22:57] Running 'pacman -Rns /testing/kernel26 2.6.37-1'
    [2011-01-09 22:58] Running 'pacman -Rns testing/kernel26'
    [2011-01-09 22:58] Running 'pacman -Rns kernel26'
    [2011-01-09 23:00] Running 'pacman -Rns kernel26 2.6.37'
    [2011-01-09 23:00] Running 'pacman -Rns kernel26=2.6.37'
    [2011-01-09 23:01] Running 'pacman -S kernel26'
    [2011-01-09 23:01] Running 'pacman -S kernel26 nvidia ndiswrapper'
    [2011-01-09 23:02] >>> Updating module dependencies. Please wait ...
    [2011-01-09 23:02] >>> MKINITCPIO SETUP
    [2011-01-09 23:02] >>> ----------------
    [2011-01-09 23:02] >>> If you use LVM2, Encrypted root or software RAID,
    [2011-01-09 23:02] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2011-01-09 23:02] >>> More information about mkinitcpio setup can be found here:
    [2011-01-09 23:02] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2011-01-09 23:02]
    [2011-01-09 23:02] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2011-01-09 23:02] ==> Building image "default"
    [2011-01-09 23:02] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2011-01-09 23:02] :: Begin build
    [2011-01-09 23:02] :: Parsing hook [base]
    [2011-01-09 23:02] :: Parsing hook [udev]
    [2011-01-09 23:02] :: Parsing hook [autodetect]
    [2011-01-09 23:02] :: Parsing hook [pata]
    [2011-01-09 23:02] :: Parsing hook [scsi]
    [2011-01-09 23:02] :: Parsing hook [sata]
    [2011-01-09 23:02] :: Parsing hook [filesystems]
    [2011-01-09 23:02] :: Generating module dependencies
    [2011-01-09 23:02] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2011-01-09 23:02] ==> SUCCESS
    [2011-01-09 23:02] ==> Building image "fallback"
    [2011-01-09 23:02] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2011-01-09 23:02] :: Begin build
    [2011-01-09 23:02] :: Parsing hook [base]
    [2011-01-09 23:02] :: Parsing hook [udev]
    [2011-01-09 23:02] :: Parsing hook [pata]
    [2011-01-09 23:02] :: Parsing hook [scsi]
    [2011-01-09 23:02] :: Parsing hook [sata]
    [2011-01-09 23:02] :: Parsing hook [filesystems]
    [2011-01-09 23:02] :: Generating module dependencies
    [2011-01-09 23:03] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2011-01-09 23:03] ==> SUCCESS
    [2011-01-09 23:03] upgraded kernel26 (2.6.37-1 -> 2.6.36.2-1)
    [2011-01-09 23:03] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2011-01-09 23:03] upgraded nvidia (260.19.29-2 -> 260.19.29-1)
    [2011-01-09 23:03] module configuration already contains alias directive
    [2011-01-09 23:03]
    [2011-01-09 23:03] upgraded ndiswrapper (1.56-7 -> 1.56-6)
    I'm also going to run some hardware tests after work just to double check that all my hardware is functioning as it should so that will eliminate another potential cause.
    If downgrading Udev to 164-3 doesn't solve the problem, i will try your version of it Daniel. And if that fails ill try downgrading the kernel to 2.6.35 or something and see if that solves it.
    Sorry for the super long post,
    Thanks again for your help.
    Scott.
    Last edited by ScottWilson1990 (2011-01-10 11:51:17)

  • My Arch is very slow after upgrading to kernel 3.0

    Hi men! This is my first post on this forum, i'm italian and i'm using archlinux since 4 months (sorry if my english is bad)...  I would like you to help me to solve a problem: as i wrote in object  my system has became very slow after upgrading to kernel 3.0: system booting, applications launch, general responses of my tasks....what's the problem? How can i resolve it? Thanks!!

    However the kernel26-lts looks slower than 3.0 so i returned to the last one...iìm going to see dmesg outputs...i've to remove "quiet" from the grub.cfg
    EDIT: I've checked but no error is shown....this is dmesg.log:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dee74000 (usable)
    [ 0.000000] BIOS-e820: 00000000dee74000 - 00000000deebc000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def12000 - 00000000def15000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Sony Corporation VPCEC1M1E/VAIO, BIOS R0300Y8 07/20/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 3 base 100000000 mask FE0000000 write-back
    [ 0.000000] 4 base 118000000 mask FF8000000 uncachable
    [ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xdee74 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fc980] fc980
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000dee74000
    [ 0.000000] 0000000000 - 00dee00000 page 2M
    [ 0.000000] 00dee00000 - 00dee74000 page 4k
    [ 0.000000] kernel direct mapping tables up to dee74000 @ dee6e000-dee74000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000
    [ 0.000000] 0100000000 - 0118000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 118000000 @ 117ffa000-118000000
    [ 0.000000] RAMDISK: 37c76000 - 37e33000
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony)
    [ 0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000def15d98 000F4 (v04 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
    [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110413/tbfadt-489)
    [ 0.000000] ACPI: DSDT 00000000deecd018 0ADBB (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000def2df40 00040
    [ 0.000000] ACPI: APIC 00000000def1bf18 0008C (v02 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01 Sony VAIO 20100720 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000def2fc98 00038 (v01 Sony VAIO 20100720 MSFT 00000003)
    [ 0.000000] ACPI: SLIC 00000000def28a18 00176 (v01 Sony VAIO 20100720 Sony 01000000)
    [ 0.000000] ACPI: SSDT 00000000def16018 009F1 (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000def15c18 0014B (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000118000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000118000000
    [ 0.000000] NODE_DATA [0000000117ffb000 - 0000000117ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113800000-ffff880116ffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00118000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x000dee74
    [ 0.000000] 0: 0x00100000 -> 0x00118000
    [ 0.000000] On node 0 totalpages: 1011202
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 894636 pages, LIFO batch:31
    [ 0.000000] Normal zone: 1344 pages used for memmap
    [ 0.000000] Normal zone: 96960 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000dee74000 - 00000000deebc000
    [ 0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000
    [ 0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000
    [ 0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000
    [ 0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000
    [ 0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000
    [ 0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000
    [ 0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000
    [ 0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000
    [ 0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000
    [ 0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000
    [ 0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000
    [ 0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000
    [ 0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s78464 r8192 d23936 u262144
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995517
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3909052k/4587520k available (4064k kernel code, 542712k absent, 135756k reserved, 3304k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] spurious 8259A interrupt: IRQ7.
    [ 0.003333] Detected 2127.784 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.88 BogoMIPS (lpj=7092613)
    [ 0.000008] pid_max: default: 32768 minimum: 301
    [ 0.000120] Security Framework initialized
    [ 0.000125] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001546] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001968] Mount-cache hash table entries: 256
    [ 0.002354] Initializing cgroup subsys cpuacct
    [ 0.002387] Initializing cgroup subsys memory
    [ 0.002403] Initializing cgroup subsys devices
    [ 0.002406] Initializing cgroup subsys freezer
    [ 0.002408] Initializing cgroup subsys net_cls
    [ 0.002410] Initializing cgroup subsys blkio
    [ 0.002461] CPU: Physical Processor ID: 0
    [ 0.002462] CPU: Processor Core ID: 0
    [ 0.002468] mce: CPU supports 9 MCE banks
    [ 0.002478] CPU0: Thermal monitoring handled by SMI
    [ 0.002487] using mwait in idle threads.
    [ 0.003640] ACPI: Core revision 20110413
    [ 0.019108] ftrace: allocating 16144 entries in 64 pages
    [ 0.025543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    [ 0.058531] CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz stepping 02
    [ 0.163154] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
    [ 0.163161] ... version: 3
    [ 0.163162] ... bit width: 48
    [ 0.163164] ... generic registers: 4
    [ 0.163165] ... value mask: 0000ffffffffffff
    [ 0.163167] ... max period: 000000007fffffff
    [ 0.163168] ... fixed-purpose events: 3
    [ 0.163169] ... event mask: 000000070000000f
    [ 0.183294] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.209823] Booting Node 0, Processors #1
    [ 0.209829] smpboot cpu 1: start_ip = 99000
    [ 0.303122] CPU1: Thermal monitoring handled by SMI
    [ 0.323240] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.343129] #2
    [ 0.343133] smpboot cpu 2: start_ip = 99000
    [ 0.436405] CPU2: Thermal monitoring handled by SMI
    [ 0.456532] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.476405] #3
    [ 0.476409] smpboot cpu 3: start_ip = 99000
    [ 0.569682] CPU3: Thermal monitoring handled by SMI
    [ 0.589820] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.596326] Brought up 4 CPUs
    [ 0.596331] Total of 4 processors activated (17030.31 BogoMIPS).
    [ 0.598893] devtmpfs: initialized
    [ 0.600028] PM: Registering ACPI NVS region at dee74000 (294912 bytes)
    [ 0.600036] PM: Registering ACPI NVS region at deecd000 (73728 bytes)
    [ 0.600039] PM: Registering ACPI NVS region at deee0000 (12288 bytes)
    [ 0.600041] PM: Registering ACPI NVS region at def11000 (4096 bytes)
    [ 0.600042] PM: Registering ACPI NVS region at def15000 (8192 bytes)
    [ 0.600044] PM: Registering ACPI NVS region at def22000 (61440 bytes)
    [ 0.600970] print_constraints: dummy:
    [ 0.601050] NET: Registered protocol family 16
    [ 0.601156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.601159] ACPI: bus type pci registered
    [ 0.601319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.601322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.613921] PCI: Using configuration type 1 for base access
    [ 0.614412] bio: create slab <bio-0> at 0
    [ 0.616187] ACPI: EC: Look up EC in DSDT
    [ 0.626457] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.646350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.646723] ACPI: SSDT 00000000def1ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.647118] ACPI: Dynamic OEM Table Load:
    [ 0.647121] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.647269] ACPI: SSDT 00000000def18018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.647646] ACPI: Dynamic OEM Table Load:
    [ 0.647648] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.666577] ACPI: SSDT 00000000def19a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.667016] ACPI: Dynamic OEM Table Load:
    [ 0.667018] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.676431] ACPI: SSDT 00000000def17d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.676844] ACPI: Dynamic OEM Table Load:
    [ 0.676846] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 1.089727] ACPI: Interpreter enabled
    [ 1.089731] ACPI: (supports S0 S3 S4 S5)
    [ 1.089754] ACPI: Using IOAPIC for interrupt routing
    [ 1.120583] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.120814] ACPI: No dock devices found.
    [ 1.120815] HEST: Table not found.
    [ 1.120818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.121147] \_SB_.PCI0:_OSC invalid UUID
    [ 1.121149] _OSC request data:1 8 1f
    [ 1.121153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.121658] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 1.121661] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 1.121663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 1.121666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 1.121668] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 1.121670] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 1.121672] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 1.121675] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 1.121677] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [ 1.121679] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
    [ 1.121692] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
    [ 1.121712] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 1.121730] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
    [ 1.121757] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.121761] pci 0000:00:01.0: PME# disabled
    [ 1.121809] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
    [ 1.121841] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit]
    [ 1.121922] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.121927] pci 0000:00:16.0: PME# disabled
    [ 1.121966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
    [ 1.121992] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff]
    [ 1.122083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.122088] pci 0000:00:1a.0: PME# disabled
    [ 1.122118] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
    [ 1.122140] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit]
    [ 1.122219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.122223] pci 0000:00:1b.0: PME# disabled
    [ 1.122251] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
    [ 1.122332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.122337] pci 0000:00:1c.0: PME# disabled
    [ 1.122366] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
    [ 1.122446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.122451] pci 0000:00:1c.1: PME# disabled
    [ 1.122480] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
    [ 1.122560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 1.122565] pci 0000:00:1c.2: PME# disabled
    [ 1.122598] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
    [ 1.122681] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.122686] pci 0000:00:1c.5: PME# disabled
    [ 1.122723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
    [ 1.122749] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff]
    [ 1.122839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.122844] pci 0000:00:1d.0: PME# disabled
    [ 1.122869] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 1.122953] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
    [ 1.123075] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
    [ 1.123103] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
    [ 1.123114] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
    [ 1.123126] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
    [ 1.123137] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
    [ 1.123149] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    [ 1.123161] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff]
    [ 1.123209] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.123214] pci 0000:00:1f.2: PME# disabled
    [ 1.123237] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
    [ 1.123259] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit]
    [ 1.123290] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    [ 1.123360] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
    [ 1.123380] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.123394] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
    [ 1.123405] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
    [ 1.123424] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
    [ 1.123443] pci 0000:01:00.0: supports D1 D2
    [ 1.123468] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
    [ 1.123487] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
    [ 1.123555] pci 0000:01:00.1: supports D1 D2
    [ 1.123579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.123582] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.123585] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
    [ 1.123589] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.123667] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
    [ 1.123693] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit]
    [ 1.123783] pci 0000:02:00.0: supports D1
    [ 1.123785] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 1.123790] pci 0000:02:00.0: PME# disabled
    [ 1.123824] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.123829] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.123834] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
    [ 1.123842] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.123953] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
    [ 1.123976] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff]
    [ 1.124115] pci 0000:03:00.0: supports D1 D2
    [ 1.124117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124123] pci 0000:03:00.0: PME# disabled
    [ 1.124175] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
    [ 1.124198] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff]
    [ 1.124336] pci 0000:03:00.1: supports D1 D2
    [ 1.124338] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124344] pci 0000:03:00.1: PME# disabled
    [ 1.124394] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
    [ 1.124418] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff]
    [ 1.124554] pci 0000:03:00.4: supports D1 D2
    [ 1.124556] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124562] pci 0000:03:00.4: PME# disabled
    [ 1.124630] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.124635] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.124640] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
    [ 1.124648] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.124886] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200
    [ 1.125105] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit]
    [ 1.125212] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
    [ 1.125642] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref]
    [ 1.125967] pci 0000:04:00.0: supports D1 D2
    [ 1.125968] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.126008] pci 0000:04:00.0: PME# disabled
    [ 1.126269] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 1.126274] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    [ 1.126279] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
    [ 1.126287] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126344] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
    [ 1.126348] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.126353] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
    [ 1.126361] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126438] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
    [ 1.126443] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 1.126448] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 1.126456] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126459] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.126461] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.126463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.126466] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 1.126468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 1.126470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 1.126473] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 1.126475] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 1.126478] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 1.126480] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
    [ 1.126515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.126656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.126708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [ 1.126765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.126833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 1.126882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 1.126997] \_SB_.PCI0:_OSC invalid UUID
    [ 1.126998] _OSC request data:1 1f 1f
    [ 1.127003] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.127035] \_SB_.PCI0:_OSC invalid UUID
    [ 1.127037] _OSC request data:1 0 1d
    [ 1.127041] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 1.127042] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.130982] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
    [ 1.131046] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
    [ 1.131066] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
    [ 1.131087] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
    [ 1.131107] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
    [ 1.131125] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
    [ 1.131143] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
    [ 1.131176] pci0000:3f: Requesting ACPI _OSC control (0x1d)
    [ 1.131179] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 1.131181] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.131415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.131460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.131503] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
    [ 1.131546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 1.131588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.131636] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.131679] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    [ 1.131722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.131826] vgaarb: loaded
    [ 1.131827] vgaarb: bridge control possible 0000:01:00.0
    [ 1.131900] PCI: Using ACPI for IRQ routing
    [ 1.134142] PCI: pci_cache_line_size set to 64 bytes
    [ 1.134246] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 1.134248] reserve RAM buffer: 00000000dee74000 - 00000000dfffffff
    [ 1.134372] NetLabel: Initializing
    [ 1.134374] NetLabel: domain hash size = 128
    [ 1.134375] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.134389] NetLabel: unlabeled traffic allowed by default
    [ 1.134412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.134418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.136441] Switching to clocksource hpet
    [ 1.139456] Switched to NOHz mode on CPU #0
    [ 1.139583] Switched to NOHz mode on CPU #1
    [ 1.139590] Switched to NOHz mode on CPU #2
    [ 1.139598] Switched to NOHz mode on CPU #3
    [ 1.142357] pnp: PnP ACPI init
    [ 1.142375] ACPI: bus type pnp registered
    [ 1.142679] pnp 00:00: [bus 00-3e]
    [ 1.142682] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.142684] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.142686] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.142689] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.142691] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.142693] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.142695] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.142697] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.142699] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.142700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.142702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.142707] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.142709] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.142711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.142713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.142715] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.142716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.142718] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
    [ 1.142826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.142841] pnp 00:01: [io 0x0000-0x001f]
    [ 1.142843] pnp 00:01: [io 0x0081-0x0091]
    [ 1.142844] pnp 00:01: [io 0x0093-0x009f]
    [ 1.142846] pnp 00:01: [io 0x00c0-0x00df]
    [ 1.142848] pnp 00:01: [dma 4]
    [ 1.142872] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.142880] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 1.142901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.142976] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 1.142999] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.143008] pnp 00:04: [io 0x00f0]
    [ 1.143019] pnp 00:04: [irq 13]
    [ 1.143044] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.143054] pnp 00:05: [io 0x002e-0x002f]
    [ 1.143056] pnp 00:05: [io 0x004e-0x004f]
    [ 1.143057] pnp 00:05: [io 0x0061]
    [ 1.143059] pnp 00:05: [io 0x0063]
    [ 1.143061] pnp 00:05: [io 0x0065]
    [ 1.143062] pnp 00:05: [io 0x0067]
    [ 1.143064] pnp 00:05: [io 0x0070]
    [ 1.143065] pnp 00:05: [io 0x0080]
    [ 1.143066] pnp 00:05: [io 0x0092]
    [ 1.143068] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.143070] pnp 00:05: [io 0x0680-0x069f]
    [ 1.143072] pnp 00:05: [io 0xff00-0xff0f]
    [ 1.143073] pnp 00:05: [io 0xff10-0xff13]
    [ 1.143075] pnp 00:05: [io 0x0800-0x0803]
    [ 1.143076] pnp 00:05: [io 0x0400-0x047f]
    [ 1.143078] pnp 00:05: [io 0x0500-0x057f]
    [ 1.143080] pnp 00:05: [io 0x164e-0x164f]
    [ 1.143140] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.143143] system 00:05: [io 0xff00-0xff0f] has been reserved
    [ 1.143145] system 00:05: [io 0xff10-0xff13] has been reserved
    [ 1.143148] system 00:05: [io 0x0800-0x0803] has been reserved
    [ 1.143150] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 1.143152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.143154] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.143157] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.143166] pnp 00:06: [io 0x0070-0x0077]
    [ 1.143171] pnp 00:06: [irq 8]
    [ 1.143208] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.143218] pnp 00:07: [io 0x0060]
    [ 1.143220] pnp 00:07: [io 0x0064]
    [ 1.143225] pnp 00:07: [irq 1]
    [ 1.143250] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.143262] pnp 00:08: [irq 12]
    [ 1.143288] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
    [ 1.143642] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [ 1.143644] pnp 00:09: [mem 0xfed10000-0xfed13fff]
    [ 1.143646] pnp 00:09: [mem 0xfed18000-0xfed18fff]
    [ 1.143650] pnp 00:09: [mem 0xfed19000-0xfed19fff]
    [ 1.143651] pnp 00:09: [mem 0xf8000000-0xfbffffff]
    [ 1.143653] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [ 1.143655] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
    [ 1.143657] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
    [ 1.143659] pnp 00:09: [mem 0xff000000-0xffffffff]
    [ 1.143661] pnp 00:09: [mem 0xfee00000-0xfeefffff]
    [ 1.143663] pnp 00:09: [mem 0xf5e0b000-0xf5e0bfff]
    [ 1.143733] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.143736] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.143739] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.143741] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.143744] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.143746] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.143749] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.143751] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.143754] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.143757] system 00:09: [mem 0xf5e0b000-0xf5e0bfff] has been reserved
    [ 1.143760] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.143900] pnp 00:0a: [bus 3f]
    [ 1.143951] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 1.157077] pnp: PnP ACPI: found 11 devices
    [ 1.157079] ACPI: ACPI bus type pnp unregistered
    [ 1.163064] PCI: max bus depth: 1 pci_try_num: 2
    [ 1.163124] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163130] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163135] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163143] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.163146] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.163149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
    [ 1.163152] pci 0000:00:01.0: bridge window [mem pref disabled]
    [ 1.163156] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.163159] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.163166] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
    [ 1.163171] pci 0000:00:1c.0: bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.163195] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.163202] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
    [ 1.163207] pci 0000:00:1c.1: bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163215] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 1.163219] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    [ 1.163225] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
    [ 1.163230] pci 0000:00:1c.2: bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163238] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
    [ 1.163242] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.163248] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
    [ 1.163253] pci 0000:00:1c.5: bridge window [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
    [ 1.163263] pci 0000:00:1e.0: bridge window [io disabled]
    [ 1.163269] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 1.163274] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 1.163293] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163296] pci 0000:00:01.0: setting latency timer to 64
    [ 1.163303] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163308] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.163318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.163323] pci 0000:00:1c.1: setting latency timer to 64
    [ 1.163333] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.163338] pci 0000:00:1c.2: setting latency timer to 64
    [ 1.163345] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.163350] pci 0000:00:1c.5: setting latency timer to 64
    [ 1.163359] pci 0000:00:1e.0: setting latency timer to 64
    [ 1.163363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.163366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.163368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.163370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.163372] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.163374] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.163376] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.163378] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.163380] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.163383] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
    [ 1.163385] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 1.163387] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
    [ 1.163389] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 1.163391] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff]
    [ 1.163394] pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163396] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 1.163398] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff]
    [ 1.163400] pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163403] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 1.163405] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff]
    [ 1.163407] pci_bus 0000:04: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163409] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    [ 1.163411] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff]
    [ 1.163414] pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163416] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
    [ 1.163418] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
    [ 1.163420] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.163422] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.163424] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.163426] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.163428] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.163431] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.163433] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.163435] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff]
    [ 1.163511] NET: Registered protocol family 2
    [ 1.163700] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.164727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.167663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.168014] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.168016] TCP reno registered
    [ 1.168027] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.168066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.168344] NET: Registered protocol family 1
    [ 2.499376] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 3.832221] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 3.832352] pci 0000:01:00.0: Boot video device
    [ 3.832384] PCI: CLS 64 bytes, default 64
    [ 3.832433] Unpacking initramfs...
    [ 3.861003] Freeing initrd memory: 1780k freed
    [ 3.861298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 3.861302] Placing 64MB software IO TLB between ffff8800dae6e000 - ffff8800dee6e000
    [ 3.861304] software IO TLB at phys 0xdae6e000 - 0xdee6e000
    [ 3.861787] audit: initializing netlink socket (disabled)
    [ 3.861799] type=2000 audit(1313594250.696:1): initialized
    [ 3.869728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 3.886559] VFS: Disk quotas dquot_6.5.2
    [ 3.886700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 3.886869] msgmni has been set to 7638
    [ 3.887107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 3.887147] io scheduler noop registered
    [ 3.887150] io scheduler deadline registered
    [ 3.887202] io scheduler cfq registered (default)
    [ 3.887320] pcieport 0000:00:01.0: setting latency timer to 64
    [ 3.887348] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 3.887672] vesafb: mode is 1600x900x32, linelength=6400, pages=1
    [ 3.887674] vesafb: scrolling: redraw
    [ 3.887677] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 3.890141] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 11250k, total 16384k
    [ 4.087472] Console: switching to colour frame buffer device 200x56
    [ 4.281840] fb0: VESA VGA frame buffer device
    [ 4.281854] intel_idle: MWAIT substates: 0x1120
    [ 4.281856] intel_idle: v0.4 model 0x25
    [ 4.281857] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 4.281902] ERST: Table is not found!
    [ 4.281955] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 4.469026] Linux agpgart interface v0.103
    [ 4.469114] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 4.473482] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 4.473514] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 4.473591] mousedev: PS/2 mouse device common for all mice
    [ 4.473653] rtc_cmos 00:06: RTC can wake from S4
    [ 4.473761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 4.473791] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 4.473886] cpuidle: using governor ladder
    [ 4.474031] cpuidle: using governor menu
    [ 4.474245] TCP cubic registered
    [ 4.474248] NET: Registered protocol family 17
    [ 4.474257] Registering the dns_resolver key type
    [ 4.474353] PM: Checking hibernation image partition /dev/sda9
    [ 4.496169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 4.502184] PM: Hibernation image not present or could not be loaded.
    [ 4.502194] registered taskstats version 1
    [ 4.512403] rtc_cmos 00:06: setting system clock to 2011-08-17 15:17:31 UTC (1313594251)
    [ 4.512569] Initializing network drop monitor service
    [ 4.516031] Freeing unused kernel memory: 712k freed
    [ 4.516201] Write protecting the kernel read-only data: 6144k
    [ 4.516747] Freeing unused kernel memory: 12k freed
    [ 4.522858] Freeing unused kernel memory: 776k freed
    [ 4.564188] udevd[93]: starting version 173
    [ 4.566281] ACPI: acpi_idle yielding to intel_idle
    [ 4.624591] SCSI subsystem initialized
    [ 4.630767] libata version 3.00 loaded.
    [ 4.632419] ahci 0000:00:1f.2: version 3.0
    [ 4.632443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 4.632515] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 4.632554] ahci: SSS flag set, parallel bus scan disabled
    [ 4.632606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 4.632610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst
    [ 4.632616] ahci 0000:00:1f.2: setting latency timer to 64
    [ 4.634910] scsi0 : ahci
    [ 4.635536] scsi1 : ahci
    [ 4.636083] scsi2 : ahci
    [ 4.636721] scsi3 : ahci
    [ 4.637168] scsi4 : ahci
    [ 4.637475] scsi5 : ahci
    [ 4.637727] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 41
    [ 4.637731] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 41
    [ 4.637733] ata3: DUMMY
    [ 4.637734] ata4: DUMMY
    [ 4.637737] ata5: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06300 irq 41
    [ 4.637741] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 41
    [ 4.861932] Refined TSC clocksource calibration: 2128.123 MHz.
    [ 4.861939] Switching to clocksource tsc
    [ 4.955224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 4.965120] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 4.965397] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
    [ 4.965402] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 4.975403] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 4.975693] ata1.00: configured for UDMA/133
    [ 4.976014] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
    [ 5.295101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.296935] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.V0, max UDMA/100
    [ 5.303748] ata2.00: configured for UDMA/100
    [ 5.319899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700H 1.V0 PQ: 0 ANSI: 5
    [ 5.638306] ata5: SATA link down (SStatus 0 SControl 300)
    [ 5.958189] ata6: SATA link down (SStatus 0 SControl 300)
    [ 5.964558] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 5.964596] sd 0:0:0:0: [sda] Write Protect is off
    [ 5.964599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5.964614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 6.073618] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 6.074200] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 6.091859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 6.091865] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 6.092089] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 7.960526] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.667393] udevd[273]: starting version 173
    [ 10.439749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 10.447052] ACPI: Lid Switch [LID0]
    [ 10.449942] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 10.449952] ACPI: Power Button [PWRB]
    [ 10.463109] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
    [ 10.484243] acpi device:4b: registered as cooling_device4
    [ 10.484911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3
    [ 10.484921] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 10.494126] thermal LNXTHERM:00: registered as thermal_zone0
    [ 10.494129] ACPI: Thermal Zone [TZ00] (58 C)
    [ 10.506259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 10.506267] ACPI: Battery Slot [BAT0] (battery present)
    [ 10.517446] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 10.524583] thermal LNXTHERM:01: registered as thermal_zone1
    [ 10.524586] ACPI: Thermal Zone [TZ01] (58 C)
    [ 10.530700] ACPI: AC Adapter [ADP1] (off-line)
    [ 10.648271] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 10.773153] iTCO_vendor_support: vendor-support=0
    [ 10.924548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 10.924706] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 10.924868] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 10.926971] sky2: driver version 1.28
    [ 10.927036] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.927049] sky2 0000:04:00.0: setting latency timer to 64
    [ 10.927089] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
    [ 10.927203] sky2 0000:04:00.0: irq 42 for MSI/MSI-X
    [ 10.927532] sky2 0000:04:00.0: eth0: addr 54:42:49:10:6d:46
    [ 11.021491] cfg80211: Calling CRDA to update world regulatory domain
    [ 11.030984] usbcore: registered new interface driver usbfs
    [ 11.031163] usbcore: registered new interface driver hub
    [ 11.031208] usbcore: registered new device driver usb
    [ 11.054022] sony_laptop: Sony Notebook Control Driver v0.6
    [ 11.064072] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input5
    [ 11.064128] input: Sony Vaio Jogdial as /devices/virtual/input/input6
    [ 11.064240] sony_laptop: brightness ignored, must be controlled by ACPI video driver
    [ 11.268875] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 11.269169] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.269177] mei 0000:00:16.0: setting latency timer to 64
    [ 11.304449] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 11.319698] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 11.319743] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 11.354358] sdhci: Secure Digital Host Controller Interface driver
    [ 11.354362] sdhci: Copyright(c) Pierre Ossman
    [ 11.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 11.374519] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.374559] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 11.374564] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 11.374590] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 11.374630] ehci_hcd 0000:00:1a.0: debug port 2
    [ 11.378526] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 11.378534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000
    [ 11.389468] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 11.389714] hub 1-0:1.0: USB hub found
    [ 11.389721] hub 1-0:1.0: 2 ports detected
    [ 11.389823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 11.389872] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 11.389877] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 11.389894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 11.389929] ehci_hcd 0000:00:1d.0: debug port 2
    [ 11.393814] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 11.393838] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000
    [ 11.406179] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 11.406377] hub 2-0:1.0: USB hub found
    [ 11.406382] hub 2-0:1.0: 2 ports detected
    [ 11.514999] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
    [ 11.515023] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 11.515072] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 11.515081] sdhci-pci 0000:03:00.0: setting latency timer to 64
    [ 11.515108] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator
    [ 11.515145] Registered led device: mmc0::
    [ 11.515206] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
    [ 11.515222] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
    [ 11.515237] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 11.515253] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 11.515261] sdhci-pci 0000:03:00.4: setting latency timer to 64
    [ 11.515278] _regulator_get: 0000:03:00.4 supply vmmc not found, using dummy regulator
    [ 11.515308] Registered led device: mmc1::
    [ 11.515344] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
    [ 11.696095] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 11.800486] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
    [ 11.823379] hub 1-1:1.0: USB hub found
    [ 11.823555] hub 1-1:1.0: 6 ports detected
    [ 11.881300] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.881313] ath9k 0000:02:00.0: setting latency timer to 64
    [ 11.899363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 11.899454] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 11.899494] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 11.929270] usb 2-1: new high speed USB device number 2 using ehci_hcd
    [ 11.931327] ath: EEPROM regdomain: 0x65
    [ 11.931329] ath: EEPROM indicates we should expect a direct regpair map
    [ 11.931333] ath: Country alpha2 being used: 00
    [ 11.931334] ath: Regpair used: 0x65
    [ 12.053537] hub 2-1:1.0: USB hub found
    [ 12.053638] hub 2-1:1.0: 8 ports detected
    [ 12.058338] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 12.058344] Disabling lock debugging due to kernel taint
    [ 12.089898] [fglrx] Maximum main memory to use for locked dma buffers: 3660 MBytes.
    [ 12.090143] [fglrx] vendor: 1002 device: 68e0 count: 1
    [ 12.090556] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
    [ 12.090572] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 12.090577] pci 0000:01:00.0: setting latency timer to 64
    [ 12.090779] [fglrx] Kernel PAT support is enabled
    [ 12.090802] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors
    [ 12.101099] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 12.101452] Registered led device: ath9k-phy0
    [ 12.101460] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005d00000, irq=16
    [ 12.115758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 12.117699] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 12.117756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 12.117877] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 12.117956] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
    [ 12.117979] HDA Intel 0000:01:00.1: setting latency timer to 64
    [ 12.132761] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
    [ 12.168259] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 12.168639] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 12.265962] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
    [ 12.387463] cfg80211: World regulatory domain updated:
    [ 12.387466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.387469] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387472] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 12.387474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 12.387477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387493] cfg80211: Calling CRDA for country: IT
    [ 12.390329] cfg80211: Regulatory domain changed to country: IT
    [ 12.390332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.390334] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390339] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390341] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [ 12.462672] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
    [ 12.939879] Linux media interface: v0.10
    [ 12.994380] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
    [ 12.994487] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
    [ 12.994502] usbcore: registered new interface driver usbhid
    [ 12.994504] usbhid: USB HID core driver
    [ 13.030968] Linux video capture interface: v2.00
    [ 13.053392] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a213)
    [ 13.060994] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
    [ 13.061057] usbcore: registered new interface driver uvcvideo
    [ 13.061059] USB Video Class driver (v1.1.0)
    [ 15.202804] EXT4-fs (sda7): re-mounted. Opts: (null)
    [ 15.503756] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 15.505206] SGI XFS Quota Management subsystem
    [ 15.527846] XFS (sda10): Mounting Filesystem
    [ 16.058466] XFS (sda10): Ending clean mount
    [ 16.172238] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
    [ 16.172257] REISERFS (device sda8): using ordered data mode
    [ 16.180082] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 16.180470] REISERFS (device sda8): checking transaction log (sda8)
    [ 16.225092] REISERFS (device sda8): Using r5 hash to sort names
    [ 16.362086] EXT3-fs: barriers not enabled
    [ 16.377355] kjournald starting. Commit interval 5 seconds
    [ 16.377554] EXT3-fs (sda6): using internal journal
    [ 16.377560] EXT3-fs (sda6): mounted filesystem with ordered data mode
    [ 16.475339] fuse init (API version 7.16)
    [ 17.345752] Adding 1052220k swap on /dev/sda9. Priority:-1 extents:1 across:1052220k
    Last edited by TheImmortalPhoenix (2011-08-17 13:23:54)

  • Upgrading SAP Kernel

    I need to upgrade the Kernel of our 620 BW System as it hasn't been done for a couple of years. 
    The current level is 1393 and DB 1467.
    I have downloaded the following:
    SAPEXE 1773 - (Kernel part 1 for Stack Q4-2004) and
    SAPEXEDB 1773 - (Kernel part II for Stack Q4-2004)
    Just wondering if this stack will contain all outstanding files from our current level?  Does this look like the correct version to install.
    Many thanks!
    Marie

    Hi Marie,
    Yes the 640 Kernel is supported, as it is downwards compatible. By the way we are running all our 620 systems with the 640 Kernel also on Windows/SQL.
    Maybe your problem is a result of a missing profile parameter (in default profile), that has changed.
    Missing parameter is dbs/mss/server=<hostname>\<instance>.
    Take a look at SAP note 858449.
    Another tip is maybe the librfc32.dll in the <windir>\system32 directory of your server, that also has to be updated. (Please don't rename or move the old file, copy it to another name or directory to make a backup, before you replace it with the new one! You risk to mix up some registry information).
    Did you had any errors while copying the new (640) kernel to the ..\sys\exe\run directory ? (file in use or so?)
    Are you sure you have stopped every thing before you replaced the kernel ? (SAP, DB, saposcol, sapmmc, and all sap-services) ?
    Sometimes (can't explain) a boot of the server helps clean up errors that can't be explained
    Can you give some more information about your error (Error:  9007041D) is not much information....
    And last yes the sap_droproc is necessary, specially if you upgrade the kernel (is mentioned in SAP note 664679).
    I hope you can solve your "upgrade"...
    Regards
    Rolf

  • Hangs during boot after upgrading to Kernel 2.6.39

    I have just installed Arch on a new computer. It works fine until I upgrade to Kernel 2.6.39. After that it hangs on boot.
    The end of /var/log/everything.log is posted below.
    Jul 26 23:52:06 localhost kernel: [ 6.036766] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0x85F3
    Jul 26 23:52:06 localhost kernel: [ 6.129046] adt7475 1-002e: ADT7473 device, revision 1
    Jul 26 23:52:06 localhost kernel: [ 6.138997] [drm] nouveau 0000:04:00.0: Detected monitoring device: adt7473
    Jul 26 23:52:06 localhost kernel: [ 6.139000] [drm] nouveau 0000:04:00.0: 1 available performance level(s)
    Jul 26 23:52:06 localhost kernel: [ 6.139002] [drm] nouveau 0000:04:00.0: 0: memory 405MHz core 270MHz shader 540MHz
    Jul 26 23:52:06 localhost kernel: [ 6.139233] [TTM] Zone kernel: Available graphics memory: 12371030 kiB.
    Jul 26 23:52:06 localhost kernel: [ 6.139236] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
    Jul 26 23:52:06 localhost kernel: [ 6.139238] [TTM] Initializing pool allocator.
    Jul 26 23:52:06 localhost kernel: [ 6.139252] [drm] nouveau 0000:04:00.0: Detected 5376MiB VRAM
    Jul 26 23:52:06 localhost kernel: [ 6.139260] mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
    Jul 26 23:52:06 localhost kernel: [ 6.150626] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
    Jul 26 23:52:06 localhost kernel: [ 6.152371] [drm] nouveau 0000:04:00.0: failed to load fuc409d
    Jul 26 23:52:06 localhost kernel: [ 6.176193] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    Jul 26 23:52:06 localhost kernel: [ 6.176195] [drm] No driver support for vblank timestamp query.
    Jul 26 23:52:06 localhost kernel: [ 6.228800] No connectors reported connected with modes
    Jul 26 23:52:06 localhost kernel: [ 6.228802] [drm] Cannot find any crtc or sizes - going 1024x768
    Jul 26 23:52:06 localhost kernel: [ 6.231002] [drm] nouveau 0000:04:00.0: allocated 1024x768 fb: 0x8020000, bo ffff880608d97800
    Jul 26 23:52:06 localhost kernel: [ 6.233786] Console: switching to colour frame buffer device 128x48
    Jul 26 23:52:06 localhost kernel: [ 6.235094] fb0: nouveaufb frame buffer device
    Jul 26 23:52:06 localhost kernel: [ 6.235094] drm: registered panic notifier
    Jul 26 23:52:06 localhost kernel: [ 6.235098] [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0
    Jul 26 23:52:06 localhost kernel: [ 6.255449] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Jul 26 23:52:06 localhost kernel: [ 6.255451] hda_intel: Disable MSI for Nvidia chipset
    Jul 26 23:52:06 localhost kernel: [ 6.255599] HDA Intel 0000:04:00.1: setting latency timer to 64
    Jul 26 23:52:06 localhost kernel: [ 7.663482] EXT4-fs (sda3): re-mounted. Opts: (null)
    Jul 26 23:52:06 localhost kernel: [ 7.807508] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    Jul 26 23:52:06 localhost kernel: [ 7.851401] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    Jul 26 23:52:06 localhost kernel: [ 8.569682] r8169 0000:08:00.0: eth0: link down
    Jul 26 23:52:06 localhost kernel: [ 8.569687] r8169 0000:08:00.0: eth0: link down
    Jul 26 23:52:06 localhost dhcpcd[747]: eth0: waiting for carrier
    Jul 26 23:52:08 localhost dhcpcd[747]: eth0: carrier acquired
    Jul 26 23:52:08 localhost kernel: [ 10.301736] r8169 0000:08:00.0: eth0: link up
    Jul 26 23:52:08 localhost dhcpcd[747]: eth0: broadcasting for a lease
    Jul 26 23:52:12 localhost dhcpcd[747]: eth0: offered 131.181.53.42 from 131.181.127.32
    Jul 26 23:52:13 localhost dhcpcd[747]: eth0: acknowledged 131.181.53.42 from 131.181.59.48
    Jul 26 23:52:13 localhost dhcpcd[747]: eth0: checking for 131.181.53.42
    Jul 26 23:52:18 localhost dhcpcd[747]: eth0: leased 131.181.53.42 for 43200 seconds
    Jul 26 23:52:18 localhost dhcpcd[747]: forked to background, child pid 774
    Jul 26 23:52:18 localhost crond[823]: /usr/sbin/crond 4.5 dillon's cron daemon, started with loglevel info
    Jul 26 23:53:01 localhost crond[823]: FILE /etc/cron.d/prune-cronstamps USER root PID 835 job prune-cronstamps
    Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 836 job sys-hourly
    Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 837 job sys-daily
    Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 838 job sys-weekly
    Any help fixing this would be greatly appreciated.

    I have been trying to isolate the problem a little further. I re-installed (with just the base and sudo) and after upgrading pacman rebooted and it worked without fail. Then I installed libusb and libusb-compat which where required when I tried to upgrade just the kernel using
    pacman -S kernel26
    which initially failed because of the missing dependencies libusb and libusb-compat. I then re-booted and that worked without a problem.
    I then upgraded to Kernel 2.6.39 using the above command and then it hung on rebooting. I saved the logs at each stage.
    The additional logs in errors.log in the reboot that failed are as follows.
    ul 26 16:28:39 O313 kernel: [ 5.120698] [drm] nouveau 0000:04:00.0: Pointer to BIT loadval table invalid
    Jul 26 16:28:39 O313 kernel: [ 5.360508] [drm] nouveau 0000:04:00.0: failed to load fuc409d
    Jul 26 16:28:39 O313 kernel: [ 5.808016] sd 20:0:0:0: [sdb] Assuming drive cache: write through
    Jul 26 16:28:39 O313 kernel: [ 5.809960] sd 20:0:0:0: [sdb] Assuming drive cache: write through
    Jul 26 16:28:39 O313 kernel: [ 5.812116] sd 20:0:0:0: [sdb] Assuming drive cache: write through
    Jul 26 16:28:35 O313 udevd[369]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
    The end of kernel.log is as follows:
    Sat Jul 9 14:57:41 CEST 2011
    Jul 26 16:28:39 O313 kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/e4733c60-3e54-4001-a83e-415b690dfcb0 ro
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-provided physical RAM map:
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfed0000 (usable)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cfed1000 (ACPI NVS)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfed1000 - 00000000cfee0000 (ACPI data)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cff00000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000630000000 (usable)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] NX (Execute Disable) protection: active
    Jul 26 16:28:39 O313 kernel: [ 0.000000] DMI 2.4 present.
    Jul 26 16:28:39 O313 kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD5/X58A-UD5, BIOS FD 02/01/2011
    Jul 26 16:28:39 O313 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] No AGP bridge found
    Jul 26 16:28:39 O313 kernel: [ 0.000000] last_pfn = 0x630000 max_arch_pfn = 0x400000000
    And this is the end of daemon.log
    Jul 26 16:27:49 O313 init: Switching to runlevel: 6
    Jul 26 16:27:50 O313 dhcpcd: received SIGTERM, stopping
    Jul 26 16:27:50 O313 dhcpcd: eth0: removing interface
    Jul 26 16:28:39 O313 2.352592] udevd[87]: starting version 171
    Jul 26 16:28:39 O313 4.531007] udevd[370]: starting version 171
    Jul 26 16:28:39 O313 dhcpcd: version 5.2.2 starting
    Jul 26 16:28:39 O313 dhcpcd: eth0: waiting for carrier
    Jul 26 16:28:35 O313 udevd[369]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
    Jul 26 16:28:39 O313 init: Entering runlevel: 3
    Please let me know if any further information would be useful in tracking down this problem. Also ignore any timings in my initial post they were incorrect.
    Last edited by TheStatsMan (2011-07-26 07:40:48)

  • Upgrading a kernel in ABAP or Java - what is correct for 7.01 and 7.1

    There are a couple ways to upgrade a kernel  depending on ABAP or Java.
    I want to know what is the best safest and approved way to upgrade an ABAP kernel based on 7.01 and 7.1
    I don't want to miss with temporary softlinks because our consultant did that and forgot abut it, which cause a huge problem.
    This is a UNIX 64 bit OS.
    Thanks
    Weyland Yutani

    Hi,
    For doing ABAP kernel upgrade there plenty of resources available. You can refer the following guide for a comprehensive overview with step by step instruction of Kernel upgrade process :-
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70d8838d-cb8f-2c10-7ab8-d1504670fbb8?quicklink=index&overridelayout=true
    Just make sure to check the following points before starting the upgrade :-
    1) Take full backup of existing Kernel directory
       After taking full backup of old kernel directory, check the total no. of files in the backup kernel directory by #ls -al|wc -l & cross check same files exist in the orginal kernel directory. This should be done before starting actual kernel upgrade - just to ensure that after wiping out current kernel dir and then after applying new kernel if there is any issue & you have restore the old kernel then you are not missing any files.
    2) Check the softlinks in the existing kernel directory & keep a screenshot so that after kernel upgrade you can create those links.
    Use #ln -s <remote filesystems to be linked> <local file at Kernel directory>
        e.g :  3> ln -s a b
         sapsys 1 Aug 26 09:34 b -> a
        Thus if you wish then you can create those softlinks manually. This may be required for brtools, TSM etc related softlink depending on your scenario you can recreate the links.

  • Having trouble upgrading WLS to 10.3.2

    Hi guys,
    I'm having trouble upgrading the domain which is created in a prior release of weblogic to 10.3.2.
    I tried to start the server and it prompted me with the option of upgrading. But somehow failed to do the upgrade.
    Here is the detailed log...:
    <May 9, 2011 8:17:25 PM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-1
    -133393-1.6.0_20-20100512-2126-linux-x86_64 from Oracle Corporation> ration> tion>
    The domain being started was created in a prior release and is being started with WebLogic Server 10.3.2.0 software. WebLogic Serve
    will attempt to backup this domain and upgrade the domain to WebLogic 10.3.2.0 format. If the domain contains WebLogic Workshop, Por
    tal, or Integration elements, the procedure should be aborted and the WebLogic Platform upgrade tool must be used to upgrade the dom
    ain.d to upgrade the domain.pgrade the domain.r release and is being started with WebLogic Server 10.3.2.0 software. W
    Do you want to continue [y/n]?: y
    <May 9, 2011 8:20:23 PM GMT> <Info> <Management> <BEA-141200> <Detected a domain which was createdf
    rom an earlier release of WLS. The Domain will be upgraded to the current 10.3.2.0 release.> lease.> ase.>
    Calling Wizard framework for upgrade: args2: [-mode=silent, -file=wcf/plugin_silent_wizard.xml, -p:plugin:plugin.silent.response.fie
    =weblogic/upgrade/domain/responses.xml, -log=stdout, -p:plugin:plugin.executionPlan.file=weblogic/upgrade/domain/execplan.xml, -p:pl
    onfiguration to: 8.1
    <May 09, 2011 8:20:25 PM GMT> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to: 8.1>
    <May 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
    2011-05-09 20:20:26,215 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Domain directory selected: /opt/fedex/ccii/welogic/ccii-mem-sip/bin PM GMT> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to: 8.1>
    <May 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
    2011-05-09 20:20:28,212 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Server Names in this directory: [MemL1SIPServr1]ay 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Current domain version 8.1.4.0 will be upgraded to 10.3.2.0.>
    2011-05-09 20:20:28,212 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Current domain version 8.1.4.0 will be upgradd to 10.3.2.0. 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Current domain version 8.1.4.0 will be upgraded to 10.3.2.0.>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Preparing to select optional actions>
    2011-05-09 20:20:28,261 INFO [prepare] com.bea.plateng.wizard.plugin.LogMessageObserver - Preparing to select optional actions
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Preparing to select optional actions>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written out laer.>1-05-09 20:20:28,261 INFO [prepare] com.bea.plateng.wizard.plugin.LogMessageObserver - Preparing to select optional actions
    2011-05-09 20:20:28,283 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Admin Server exists in this directory. Configration will be written out later.NFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written ou
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written out laer.>guration will be written out later.
    2011-05-09 20:20:28,287 FATAL [execute] com.bea.plateng.wizard.WizardController - Uncaught Exception
    java.lang.NullPointerException
    at weblogic.upgrade.domain.configuration.NodeManagerCredentialsPlugIn.execute(NodeManagerCredentialsPlugIn.java:123)
    at com.bea.plateng.wizard.plugin.silent.tasks.ExecutePlugInTask.execute(ExecutePlugInTask.java:76)
    at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
    at java.lang.Thread.run(Thread.java:619)
    <May 09, 2011 8:20:28 PM GMT> <FATAL> <Upgrade> <BEA-800000> <Uncaught Exception>
    java.lang.NullPointerException
    at weblogic.upgrade.domain.configuration.NodeManagerCredentialsPlugIn.execute(NodeManagerCredentialsPlugIn.java:123)
    at com.bea.plateng.wizard.plugin.silent.tasks.ExecutePlugInTask.execute(ExecutePlugInTask.java:76)
    at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
    at java.lang.Thread.run(Thread.java:619)
    A fatal error has occurred. This application will terminate.
    <May 9, 2011 8:20:28 PM GMT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason: Error upgrading the domain. Look at your sandard output and error for more information> tion>
    <May 9, 2011 8:20:28 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <May 9, 2011 8:20:28 PM GMT> <Error> <WebLogicServer> <BEA-000383>
    <May 9, 2011 8:20:28 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Hope you guys find me a solution for this...Thank you.

    Hi, not positive, but it sounds like maybe the Optical drive is flaky, but a lomg shot...
    I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
    Disconnect the USB cable from any Uninterpretable Power Supply so the system doesn't shut down in the middle of the process.

  • Reg UPgrading SAP Kernel for ECC 6.0

    Hi,
    We have a ECC 6.0  SAP System.
    The current kernel in our system is 133.
    We wanted to upgrade the Kernel
    We have the following kernel versions
    146
    159
    175
    179
    185
    We wanted to know the stable kernel versions among the above and general issues encountered in the kernels
    Please advice

    Just go to the latest kernel.... no point in going from an old kernel to another old kernel. Usually kernels are released every quarter so just get the latest available.
    Regards
    Juan

  • Trouble Upgrading to GB 2.0.2

    I'm having trouble upgrading to Garageband version 2.0.2 I downloaded the installer but whenever i click on it a window opens up that says: 'an eligible GarageBand application was not found in /Applications'
    Any help is greatly appriciated,

    no i do not have garageband 2, i didnt know you had to buy it, but the whole reason i tryed to download it was because since i upgraded to Tiger my garage band wont play real instruments. The description of the 2.0.2 update said that it improves compatibility with Mac OS X Tiger, so i figured i should try that. But i guess i need to BUY garageband 2 in order to use that update. But does that mean in order for me to use my garageband effectivly again i need to BUY another product (garageband 2)?

Maybe you are looking for

  • When will the iPod Touch 5th generation be coming to stores or be available online?

    Just wanna know when it is coming out, so i can buy it

  • Finding fields having different values

    Hi There are two internal tables with same structures, each holding single record. However, the values of those records are different. I need to find out the fields in which the values are different. How can I perform this. Could any one help? Thanks

  • Is it possible binding seeded vo where clause by personalizing?

    I found oracle.apps.ar.hz.components.lookup.server.HzPuiLookupVO . Query is : SELECT * FROM (SELECT MEANING, LOOKUP_CODE, LOOKUP_TYPE FROM AR_LOOKUPS WHERE ENABLED_FLAG = 'Y' AND TRUNC(SYSDATE) BETWEEN TRUNC(NVL(START_DATE_ACTIVE, SYSDATE)) AND TRUNC

  • APs reboot due to high number of clients per radio

    Hi, Has anyone problems with accesspoints reboots at high client count (50+ associations per radio) We have a 5508 WLC with 7.3 Code and 3600 AP´s. Our problem is that sometimes accesspoints reboots. And this only if a lot of clients are connected. M

  • WAN Fail Over in Duplexed Setup

    Hi, We have a Duplexed setup with Rogger over the WAN and PG's with local Fail-over. Side A is having 2 PG's and Side B is having 3 Pg's. Out of 3 PG one is Dummy PG and made active in Side B. If the WAN Link(Public and Private) go down which Side wi