Trouble using Accelerator for CTRL+S
Hi,
I set an accelerator for CTRL+S (Save), like this
item = new JMenuItem("Save");
item.addActionListener(new WeakActionListener(saveAction));
item.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_S, KeyEvent.CTRL_MASK));Inside my JDialog, I have a lot of textboxes, and if I am inside one of the text boxes, and I press CTRL+S, nothing happens. is there any solution to this?
thanks
I'm having no problems getting the accelerator to work while in a text field. What kind of text box are you using? It seems to work fine with JTextField.
I'm also curious why you didn't simply put the saveAction in the constructor for the JMenuItem.
Similar Messages
-
I'm having trouble using COLOR for my movie
I'm using Color for my movie I'm editing on FCP so this may be more of a question for the Color forums, but I figured I would get a faster response here.
When I go to open Color, it gives me a message saying:
"Color recommends that your system have 128 MB of VRAM; this system only has 64 MB of VRAM."
What does this mean? How do I get more VRAM?You need to upgrade your graphics card (if possible).
VRAM is the RAM your graphics card has...
Dave -
Trouble using LogonTicket for SSO to ECC System
Hi,
I am trying to connect to an ECC System from my portal. I created a system object and filled all relevant fields. When I run the Connection Tests the Connection Test for Connectors fails with
"Connection failed. Make sure that Single Sign-On is configured correctly"
I have imported the portal certificate into my backend system. But I still think that there is something wrong with the PSE on my ABAP side...
When I run the transaction SSO2 it says that the "The Digital Signature for This Certificate Cannot Be Verified" and that there are no entries in the certificate list.
When I open STRUSTSSO2 the certificate appears in the Certificate List and in the ACL as it should be...
Any help solving this issue would be appreciated...
Thanks ahead,
BerndHi Bernd,
Check the parameters in RZ10.
login/create-sso2_ticket = 2
login/accept_sso2_ticket = 1
Good Luck
Grilo -
Is anyone else having trouble using pixels for the canvas size instead of in's in the trial version?
I go to image and then image size and everytime i go to change the canvas size to inches it will not work. Is it becasue the it's the trial version?
oh ok I found out the resample but it still doesn't allow me to adjust the canvas size to pixels. The option is still in inches and it is impossible to crop quickly with it in inches
-
I just bought a acer chrome book being told I can utilize PhotoShop on it and keep an easy platform to use. is it worth the trouble using PS for green screen on a chrome book?
We don't really do Green Screen with Photoshop, but it certainly does an excellent job of making transparent backgrounds for still images. It wouldn't be able to do this with video though.
-
I have used lightroom for ~2 years and have lightroom 5.5 installed on a PC. Yesterday evening I uploaded a new set of photos which I cataloged and rated as usual. After that when I switched to the develop module trouble began. First thing was when using the crop tool the picture would disappear and only reappear once I closed the tool. Then exposure and White balance changes would change the histogram but not the appearance of the photo. Finally clipping was also not appearing on the picture. I first reuploaded the photos. No effect. Then I reinstalled lightroom. No effect. Help please!
Try deleting your preferences file
How do I delete the Lightroom Preferences file? - The Lightroom Queen Help Desk & Members Area - Powered by Kayako Resol… -
Since using cloudflare for my site I'm having troubles with Firefox cache
Hello,
Since I'm using CloudFlare for my Site I'm having a weird trouble occurring only with Firefox (version 16.0.2 / Mac OsX.6.8), but not with Chrome or Safari.
When I navigate from the main page of my Wordpress Site to a single post, then back to the main page, then to another single post and back again to the main page, the browser displays a binary file instead of the normal page. After emptying Firefox cache the page loads again properly.
When I pause CloudFlare the trouble disappears.
I just ask here because this does not happen with other browsers.
The config of the site is : Wordpress 3.4.2 with W3 Total Cache Plugin and the browser caching enabled.
If disabling the plugins the problem remains the same.
Thanks in advance to anyone who could help.Hi,
This is not a solution but one way you could try to troubleshoot this is through the [https://developer.mozilla.org/en-US/docs/Tools/Web_Console Web Console] opened via '''Tools''' ('''Alt''' + '''T''') > '''Web Developer'''. You need to have it open before loading/reloading etc. Clicking on GET, POST links provides detailed info including Content-Type, encoding etc. You can also right-click and select '''Log Request and Response Bodies''' to view the transferred data. Hopefully you would be able to find the cause and resolve it.
[https://developer.mozilla.org/en-US/docs/Tools Firefox Tools] -
I'm having trouble upgrading to ITunes v12.0.1 with
Win 7. Download progress bar stalls and eventually cancels itself. Have tried
Tools --> Download Only, but same result. Have been using iTunes for 3+
years without difficulty; I have lots of ram, hard drive and speed.
Thanks for your inputOne step listed in the link to "helpful" info, was (when Iooked 30 seconds ago), to search for and download the newest version of iTunes. I'm running iTunes on Win 7 machine and was prompted to update today, 10.22.2014, and did so without a problem. Having said that, however, it looks as though the latest iTunes (12.0.1.26) is finally doing what the last version refused to do, which is to actually fully populate all my playlists on my 6, but there is a hitch: 12.0.1.26 will NOT allow you to show the sidebar unless you click on "playlists," that is, you cannot keep it open all the time.
And, when plugging the 6 into the computer, the phone icon shows up but clicking on it does nada. What does work, for some strange reason, is clicking on the tiny icon (just under the "Store" menu link at top screen) which looks much like a tiny barrel, someone's idea of external drives, I suppose. The phone then comes up, with the list of stuff on the phone just under it where the sidebar used to be. Sync is now restricted to the lower right of the screen.
Apparently, you will also need to update your iPhone's software as well; some friends with the 4 and 4s, however, had troubles with them after upgrading. The message from Silicon Valley (I can see Apple from my backyard, ha ha) is apparently, "keep upgrading," folks, get rid of those old phones. -
Carrier maybe charge for sms message for activation yourtime..trouble using facetime on iphone
What is your technical question?
-
Hi, I am having trouble using the smooth tool on a logo that I created. I have watched tutorials and something isn't working for me. When trace with the smooth the line just disappears and doesn't smooth anything out. Please help.
Sorry, that's Monika with a k
On Tue, Nov 18, 2014 at 2:26 PM, Monika Gause <[email protected]> -
Using accelerator keys for loading a appliaction made with J2ME
Hi
Is there any methods to use accelerator keys to load a application made with J2ME for mobile telephones. The application is not running and i must find a way to load the application using keys codes.
How can i accomplish this? can i use the application manager and the jad file? i know that i can use PushRegistry for incomming connections to load the application automaticaly. But i need a way to accomplish this by using the key events on a mobile phone when the application is closed.
Best Regard
jan Fredrik FallsenHi
Is there any methods to use accelerator keys to load a application made with J2ME for mobile telephones. The application is not running and i must find a way to load the application using keys codes.
How can i accomplish this? can i use the application manager and the jad file? i know that i can use PushRegistry for incomming connections to load the application automaticaly. But i need a way to accomplish this by using the key events on a mobile phone when the application is closed.
Best Regard
jan Fredrik Fallsen -
Trouble sending e-mails using OUTLOOK for MAC ;MAC I-PAD or I-PHONE.
I have the 3 devises MAC; I-PAD and I-Phone. My normal e-mail account was working fine then suddenly it stopped SENDING mail (I can still receive).
I am using OUTLOOK for MAC as my mail account.
My regular laptop works perfectly with all the same settings-it is only my apple devises.
I have attempted the following:
Reboot.
Checked all settings and changed both the smtp and the outgoing port.
Contacted the various service provider who have checked all of their settings and all is fine.
I get an error message saying OUTLOOK CAN NOT FIND THE SERVER or SERVER CONNECTION HAS FAILED, but sitting right next to me the laptop is sending/receiving as normal.
Any ideas??Mail and Address book
-
Trouble using Cut & Paste function
I am having trouble using any type of cut and paste function
in Dreamweaver......I have tried using "ctrl c" and "ctrl v", have
tried using right click mouse function with drop down menu for
cutting and pasting, and using the edit (top bar) cut and paste
functions. Nothing works.......it doesn't matter whether I cut and
paste within Dreamweaver or whether I cut from a word document and
paste into Dreamweaver. It just doesn't work. Any ideas on how to
fix this issue? I understand this SHOULD be working.Did the problem just occur out of the blue? Was Cut &
Paste working OK for
a while? Can you think of anything you changed between when
it worked and
when it broke?
See if this workaround solves the problem:
Re-creating the Dreamweaver user configuration folder on
Windows
http://www.adobe.com/go/36bda422
Please post back whether this solves it or not.
Thanks,
David Alcala
Adobe Product Support -
PLEASE help!! I use Outlook for my email and the Mail App Icon that is in my dock, that I know nothing about, was also storing all my emails. So, I tried to delete ONLY the emails in the Mail App but somehow (under Preferences maybe?) I also deleted ALL my OUTLOOK emails in my inbox. Can someone please please tell me if there is a way to get my Outlook inbox emails back OR EVEN the emails that were in my Mail app - because even tho I never use the Mail app, at least the emails would be there.
When I was trying to delete the emails in my inbox for the Mail app - I followed THESE directions. It did in fact clear my inbox for the Mail app. But then I went to log on to my Outlook account and EVERY SINGLE EMAIL was gone. And not in the Deleted box. Just gone. Here are the directions I followed that screwed everything up. Please help.
Top menu bar, Mail > Preferences > Accounts > Mailbox Behaviors.
Uncheck "Store deleted messages on the server".
At the drop list for "Permanently erase deleted messages when", choose "Quitting Mail".
Next...
Top menu bar, Mail > Preferences > General.
At "When searching all mailboxes, include results from", uncheck "Trash".
Select All = command Ai found out my prob!
here is what you do.
go to the "system preferences" on your dock.
click "software updates".
click "installed software"
if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
go to mail.
click "mail" at the top.
click "preferences...".
find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
hit the "+" (right next to the "-") and add your accout back!
its something with that update that effected mail, i hope this works out for you, if not reply back -
Here is the etrecheck report. Any suggestions of some other maintenance I can perform on my computer? A mac tech did a system diagnostic and found nothing wrong with the hardware. I have already reinstalled Mavericks, so it seems like the next step is wiping the harddrive clean and starting over, but I want to avoid that if possible! Can anybody help?
EtreCheck version: 1.9.15 (52)
Report generated September 2, 2014 at 6:11:15 PM CDT
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:28:34
Disk Information: ?
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (346.45 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ?
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.focusrite.driver.usb2audio (1.7 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
[loaded] com.waves.driver.soundgrid (2.0.0) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.paceap.eden.licensed.plist Support
[running] com.waves.daemon.SoundGridProtocolService.plist Support
[loaded] PACESupport.plist Support
Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
User Launch Agents: ?
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.4.2.18903 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Safari Extensions: ?
wrc
Searchme
Amazon Shopping Assistant
Ebay Shopping Assistant
SlickSavings
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Tuxera NTFS Support
Time Machine: ?
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 142.30 GB
Destinations:
TOURO Mobile 3.0 [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 2
Oldest backup: 2014-08-04 21:26:13 +0000
Last backup: 2014-08-14 23:31:16 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 142.30 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
4% SGProtocolService
2% firefox
1% fontd
0% WindowServer
0% imagent
Top Processes by Memory: ?
270 MB firefox
106 MB com.apple.IconServicesAgent
66 MB Finder
41 MB mds_stores
33 MB mds
Virtual Memory Information: ?
5.92 GB Free RAM
1.02 GB Active RAM
369 MB Inactive RAM
712 MB Wired RAM
282 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
How do I transfer Apps from iPhone4 to iPhone5. They show as being downloaded on iTunes.
How do I transfer all of my apps from my iPhone4 to iPhone5? I thought I had done that, but they are not showing on the new phone. When I go back into iTunes and look at my purchased items they all show downloaded. How can I get these on the new phon
-
Attaching files as Attachments, not INLINE attachments
I'm sending images to a client who's on Lotus Notes (7.02). We have discovered an issue with inline attachments in Lotus, where attachments can only be drag and dropped out of Lotus if the attachment was NOT sent as an inline attachment. This was tes
-
Where to change encoding setting?
Here are my custom encoding settings for video: 03.06.2015-17.27.37 - HOLLY_HOUSE's library I wish to change bitrate encoding from VBR1 to VBR2. I'm sure it's possible but I can't find where to do that. Can you direct me there? thanks in advance!
-
Import MS Access 2010 (*.accdb) to SQL Server Express 2014
Hi, I have a SQL Server Express 2014 installed in my laptop and when I trying to import MS Access 2010 (.accdb) database using .net framework ODBC it still looking for a driver. Please help. Thanks!!
-
How to control dimension-ID for External dimensions
Everytime I load External dimensions, dimension Ids are automatically populated. I want to use same id for existing dimensions. How can I do it?