Trouble using apple tv in a new location

I use Apple TV every day at home via WiFi to watch Netflix, Hulu, etc on our television. We are in a different location for a month and I'm depending on it for our entertainment. I've logged it in to the WiFi where we are staying along with my MBA. The complete menu is now available but nothing connects. Signal strength is shown as strong.
What have I overlooked?

It looks like you have guest access in a hotel or place like that. Check this post and it might help you:
https://discussions.apple.com/message/20517336#20517336

Similar Messages

I am having trouble using Home sharing on my NEW Apple TV from my windows itunes

i having a tough time using home sharing on my New Apple TV and my windows computer iTunes i have the latest update of iTunes. And it is on both my computer and Apple tv

Nlangston wrote:
i having a tough time using home sharing on my New Apple TV and my windows computer iTunes
How are you having "a tough time"?
What happens?
What doesn't happen?
-> http://support.apple.com/kb/TS2972

HEEEEEELP - trouble using Apple ID

Some time ago i changed my e-mail adress and therefore i had to change my Apple ID to the new e-mail. So far so good.
I now have trouble using my Apple ID on my iPhone. It automatically logs on the old Apple ID, but there is no code for that Apple ID anymore. When i use the password i used with my old Apple ID, it will not accept (i have not changed it - only the "username")
When i go into my Apple ID account, the old e-mail adress is deleted (only the new e-mail adress is in my account), so how can it be, that the old Apple ID is the one my phone wants to use?
I have tried changing my password on the old account, by pressing "fotgot password", but the mail to reset my Apple ID is sent to my new e-mail and therefore it is the password to my new Apple ID i'm changing.
I hoped it only was a problem because the old phone had already been logged in with the old Apple ID, but i have just recieved my new iPhone 5s and now i can't get all my previous purchases and stuff to the new phone, because it also wants to use the old Apple ID, and i still have no password.
It is also causing my iCloud to not work proberly.
What to do? Hope someone can help me.

I just skipped the part of the setup with my old e-mail, and did the setups manually when my new phone was done setting up. Now I can use my Apple ID and iTunes and iCould account for the first time in months.
Thank you for your help!

How do I use Apple Backup with my new MacBook Pro?

I've been using Apple's Backup app from the old days of Mobile Me (remember when we had to pay to use Apple's cloud?). I've just bought a MacBook Pro and I transferred everything from my old iMac (early 2008 running Mavericks). Everything works fine, but my copy of Backup has reverted to demo mode, restricting me to just 100 MB per backup. It tells me that in 60 days, I will lose even that.
How do I transfer over my permissions to use this app?
Thanks!

If you have everything on your new machine, set up an iCloud account. System preferences/iCloud.
http://support.apple.com/kb/HT4847
You may want to buy an external drive (they are cheap these days) and set up Time Machine on it.

Trouble using apple configurator

I have been trying to setup 20 iPads using Apple configurator for the last couple of days. I purchased all of my codes for each of the apps I want to install on the iPads. I have everything setup, but for some reason whenever I try to put the apps on the iPads using the codes through Apple configurator, I get an error saying that the code could not be redeemed and that I need to put my Apple ID and password in. I have authorized the computer with itunes and have done everything that I can think of, but I continue to get the same error. I am clearly missing something and any help would be greatly appreciated.

Restarting Apple Configurator and/or redownloading and reimporting the VPP codes will often cure this issue.
You should receive a pop up prompt, within Apple Configurator, asking you to sign in with your Apple ID* when trying to deploy apps that are using VPP codes to any iPads. Sometimes this prompt doesn't appear but disconnecting all the iPads and restarting Apple Configurator normally cures it.
*This should be the Apple ID you used to download the app within iTunes before you imported the app into Apple Configurator - not the VPP account used to purchase the VPP codes.

Trouble Using Apple's Video Adapter

I am having trouble getting my eMac to work with the Apple Mini-DVI to Video Adapter. There are no directions telling you how to use it or to even get it to work. I want to use it to import videos from my Sony Hi8 camcorder and was told by Apple's Live help that this is what I needed to import video and make DVDs. How do I get this adapter to work?

Welcome aboard.
I think the adapter you have is for video output, not input. To input video to the eMac you need a firewire connection. Sony cameras typically have a 4 wire connector which is smaller than the 6 wire plug on the mac, so you need a cable that has a 4 wire connector on one end and a 6 wire connector on the other. Cameras often (but not always) come with such a cable. You also need a digital camcorder- not just Hi8., although Sony does make cameras that will do both. If you camera does not have digital output, you need a convertor box.

Re: HP Product Support using Apple Software Updates for new OS X 10.9 Mavericks

I have a similar problem on my macbook pro. I had to call tech support for my extended warranty the last 2 times a new firmware update was released after installing. I always update from the apple updates on my laptop and am using the HPOfficeJet Pro 8600 plus. Its the best printer I ever had but there appears to be issues when using the airplay wireless connection.

Hi @Obiwon4luke,
I not certain I understand, I did go back and read some of your older posts though to try to better understand the issue. It sounds like you are experiencing an intermittent connection with your 8600 Plus, is this correct? I see you have contacted phone support several times and have been able to get a temporary solution each time. What sorts of things have they tried? Knowing what you have done up to this point may help me identify the root cause and work towards a more permanent solution.
In the meantime, please complete the solutions presented in the following document; HP Officejet Pro 251dw, 276dw, and 8600 Printer Series - Printer Does Not Maintain Wireless Connecti...
Clicking The thumbs up icon below, helps me see that you are grateful and/or pleased with my post! If the issue persists, I will happily do all I can to assist you
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Trouble using Apple braille in Photoshop CS5

I've been trying to use the Apple Braille font in Photoshop, as well as in InDesign, but it doesn't work. InDesign just shows rectangles, and Photoshop keeps changing back to Myriad. Does anyone know how to fix this (or is you know how to create a font, that would be great too). It's crucial that I fix this as I am using Braille text as a design element in a work I am doing.

Hi,
I'm glad you found a typeface replacement that works. There's something odd about the Apple Braille typeface and how it gets set. Trying to use it with Text Edit results in a similar behavior (one needs to copy the glyph from the Character Viewer, instead of chosing the typeface in the Fonts picker).
The Myriad replacement in Ps is because you have 'Enable Missing Glyph Protection' turned on in the Type preferences. InDesign is not replacing the missing glyphs and just showing boxes.
regards,
steve

Trouble Using Apple TV for Presentations with an iPad

I'm trying to use an apple tv for presentations in an auditorium (through a projector) with my iPad through airplay. When I mirror the iPad (in landscape mode) and start a keynote presentation, the picture is way off center and does not fill the screen. Any suggestions?

Thanks Winston, I've used it before with my TV and it worked well there (although it never fully filled the screen).
I'm sure it's just a matter of getting it to talk to the projector and get synced up. I was thinking about trying to set the projector to display in 720p with a 60 hz refresh rate to match what the Apple TV is putting. What I really want to do here is fill the screen, do you have suggestions as far as settings to match the iPad. The Apple TV and it's interface fills the whole screen but when I use the iPad, that's when it's off center and much smaller.

Trouble using Migration from iMac to new i5 iMac

I just purchased the new i5 iMac. I want to use the migration software to transfer my files, programs etc. to my new machine. Everything goes as directed until the i5 reads my old iMac and then give me this error:
"There are no versions of Mac OS X available on your old Mac."
What does this mean. My old mac is running OS X 10.4.11. Will I still be able to migrate all my information?

Problem solved! I don't know what the problem was. Probably the order I was turning on the computers. They were recognizing each other but I was getting the error message on the new computer. I shut everything down and the started over and everything clicked!
Thanks for the help! I will look out for Rosetta and will definetly repair permissions as soon as the updates are done.
I love this site! Better than any tech department around!

Having trouble using a simple class..New to AS3

Hello Everyone,
I am new to AS3 but not to AS2. I have written a simple class
and when I import it, I don't see the object that should be created
upon calling the constructor. Can you guys tell me where am I going
wrong. And I am very puzzled about 'document class'. Yes, I have
google numerous threads on "document class" but still very shaky on
this matter. Here is my simple class which should place a button
object on the stage when I create a new object of this class.
Once I have created the BTN class, I have made sure that I
have button component in my library, I then instantiate the object
by creating a new CS3 file and importing my class:
import com.learning.as3.*;
var b:BTN = new BTN();
When I test the movie, I get the following errors:
1172: Definition com.learning.as3 could not be found.
1046: Type was not found or was not a compile-time constant:
BTN.
1180: Call to a possibly undefined method BTN.
Any help would highly be appreciated.
Thanks you.

Hello Ned,
Yes, I have made sure that my directory structure exist as it
should be and yet I still get the errors.
Thanks a lot.

Moving datafiles to a new location: change not flushed

Hi all,
I am using Oracle 10g release 10.2.0.1.0 patched 10.2.0.3.0
I need to move all datafiles of the DB from a current location to a new one. Here are the steps I follow (I use SPFILE):
1-Shutdown the DB
2-Move all .DBF .LOG .CTL files to the new location
3-startup mount
4-alter database rename file 'old location' to 'new location' ; ... for all .DBF and .LOG files
5-alter system set control_file=<list of CTL files in new location>
6-alter system set core_dump_dest=<new empty location for cdump>
7-alter system set user_dump_dest=<new empty location for udump>
8-alter system set background_dump_dest=<new empty location for bdump>
9-alter database open
From this point, if I use select * from v$logfile or select name from v$datafile or show parameter, I see that the DB is using all files in the new location. That's correct.
My problem is: if now, I issue a shutdown followed by a startup, the DB will then show the old location for files as if my updates (steps 1 to 9) were not flushed/commited.
Is there a kind of commit to have my changes taken into account ? How may I resolve my problem ?
Thanks for any help.

This does not work:
1-Shutdown the DB
2-startup mount
3-alter database rename file 'old location' to 'new location' ; ... for all .DBF and .LOG files
4-alter system set control_file=<list of CTL files in new location>
5-alter system set core_dump_dest=<new empty location for cdump>
6-alter system set user_dump_dest=<new empty location for udump>
7-alter system set background_dump_dest=<new empty location for bdump>
(So changes are now in the old location)
8-shutdown
8-copy all .DBF .LOG .CTL files to the new location
9-startup
... because when the alter database statement is issued, oracle does not find the file in 'new location'. So the correct sequence with the spfile is:
1-Shutdown the DB
2-copy all .DBF .LOG to the new location. Do not copy the .CTL files at this step.
3-startup mount
3-alter database rename file 'old location' to 'new location' ; ... for all .DBF and .LOG files
(Oracle finds them in the new location)
4-alter system set control_file=<list of CTL files in new location> scope=spfile
5-alter system set core_dump_dest=<new empty location for cdump> scope=spfile
6-alter system set user_dump_dest=<new empty location for udump> scope=spfile
7-alter system set background_dump_dest=<new empty location for bdump> scope=spfile
(CTL are still in old location but contain information about the new location)
8-shutdown
9-copy all .CTL files to the new location
10-startup
Many thanks to you all for your help.

I have an older TV (not HD). Can I use Apple TV?

Do I need a specific TV to use Apple TV?

the new appletv 2 the black one can only be connected to tv's using hdmi connector
if your tv don't have that you're pretty much lost there are converters to older types of connectors but it's a gamle to pay the pretty high price tag to try to see if they work
if it's the older appletv 1 alu one it can also be connected to component input on the tv which is an older std. that may be on older tv's
if the the tv only have composite (even older then component) one can only get a black & white image by connecting the green component output from the atv to the red composite input on the tv

Apple Configurator not restoring new iPad 2 with backup

I've been using Apple Configurator to restore new, out-of-the-box iPads with a back up image in order to skip the registration process and bind them to Profile Manager. Now that iPads are coming with OS 6, it seems that it's causeing the iPads to fail restore and I have to set the iOS setting to Latest (used to be "No Change").
I've remade back ups, updated to Apple Configurator 1.2.1, and taken out the profiles, but it seems that no matter what I do I can't restore an iPad 2 with just a backup without installing the latest iOS. It takes 4-5 times longer for each iPad and really slows down my deployment.
Thanks for any advice you can give me.

What if you get the "iPhone couldn't restore due to corruption"? That might be because of a difference in the iOS or simple because the previous backup process wasn't fully successful. Then I might recommend you to take a look at the iPhone Backup Extractor. Also I would love to see you picking up such a subject, how we can deal with corrupt backups. Cheers!

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed. The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?

Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad.

Trouble using apple tv in a new location

Similar Messages

Maybe you are looking for