Trouble using Creative's Live! Cam Video IM Pro

I have just buy a new webcam and installer all that should be and upgrade.But in cam detector and Msn is my cam not with me when i move around , the pic be blurred and laggy.what can be wrong.what should i do to fix the problem?I have 2,40 GHz and 768 RAMin graphiccard i have Geforce 4 64MB

no one can help me? plz thx

Similar Messages

  • Live CAM Video IM Pro - Blue Screen (KS.SYS)

    Just purchased Live CAM Video IM Pro first creative product.
    My System: WinXP SP2, GB, Over 8 GB system space free.
    Installation went fine (no errors) post install requested reboot .. rebooted system. Blue Screen with KS.SYS.
    Uninstalled all software. re-installed with bare minimum. Troubleshooted the system multiple times. Finally got the culprit (Live Cam Video IM Pro driver).
    Without driver system works fine with drivers Blue Screen. Tried backup copy of KS.sys no success (seems KS.sys is dinged!)
    Result: The cam is useless.
    Any help is greatly appreciated.

    no one can help me? plz thx

  • 32 bit live cam video im pro vista dri

    I just purchased a li've cam video im pro and downloaded the vista 32 bit driver. I ran the setup and the files appear to be in the correct directory, but the "driver set-up" progress window stalls at 90%. I thought the installation might need the camera, so I plugged it in, but alas, to no avail. I've tried to install the camera 4 different times, but each time it goes all the way through the process and then freezes at 90%. I've doubled checked and I'm running a new install of Vista 32 bit on a ?new gateway computer. Anybody got any ideas?Pete

    no one can help me? plz thx

  • Trouble using Creative Audigy 2 ZS Video editor with an external Dolby / DTS Deco

    I had purchased a Creative Audigy 2 ZS Video editor for following two requirements,
    I wanted to be able to Digitize video from almost any source.<
    And I also wanted to have an external Audio Card that I could share between my Home Desktop / Laptop and let Digital Audio Signal get to my Yamaha Reciever that powers a Bose Home Theater Speaker System.<
    My typical connection setup is,
    Desktop / Laptop >> USB 2.0 Shielded Cable >> Audigy 2 ZS Video Editor >> Optical Out >> LC Optical Cable >> DVD Optical In of Yamaha reciever
    I do not have WinDVD or any other program that can allow SPDIF in Pass Through Mode, so I use VLC as my media player. While playing DVD / other DivX / XVid videos with Dolby / DTS / AC3 audio track I get the option of setting the audio to SPDIF Pass through Mode and that's how I use it.
    It had been working fine for a while (6 months) and then I was not using the card for a while (been busy at work). And since then I'm not able to use this in SPDIF Pass Through Mode any more.
    Each time I select that mode in VLC the player kinda freezes and plays Media File with breaks, making it just un-usable. In case I leave the player audio option to Stereo output?mode it works fine, but I do get only Analogue Audio deli'vered to the External Recei'ver and to say the least, after listening to DTS / Dolby audio this simply doesn't cut it.
    I've already updated the latest drivers from Creative Site, have tried the card with two different Dell Laptops (D820 and D80) and my home desktop. It gives exactly same result in all cases.
    I've not tested DTS Decoding output from the Device itself, 'cause I don't have sufficient cables to take decoded output from the device and send that to the receiver. But in case I opt that option in VLC player The player keeps playing Video without any issues. I can't validate if it's decoding correctly or not, 'cause I don't have cables to connect all that outputs to the receiver.
    Can my problem be related to anything on the Optical connection cable itself?
    If someone could shade some light on this issue that would be really helpful.

    Hello,
    I have the exact same problem and would very much like to know if there are 64bit drivers available.
    Thanks in advance.

  • Unable to get Live Cam Video IM pro to work with MS Messenger

    I have installed Live Cam IM Pro and all software from CD, plus updates. It works if I try Cam Manager ... I see myself in preview window.Looking in Start - settings - control panel - scanners & camera there is only one entry, the Live Cam pro. I cannot get it to work with Windows Live Messenger .... if I initiate a video call, it rings but when far end answers ... I get video window with ... video loading message, but it fails and I just get a standard XP icon. If I go to Messenger .. tools ..audio & video the camera sparks into life and again I see myself in preview.But when I go to tools .. webcam settings I see the error message :Cannot change camera settings because your camera is not plugged in or you are using it in a video conversation or with another programIt is obviously plugged in, and there are no other programmes running. I have tried deinstall & reinstall ... no difference. I have removed CD extras .. so now just have Cam Manager & Video driver ... but still no joy.Anybody know how to fix this ?
    Message Edited by Catherina-CL on 02-12-2007 08:39 AM

    Bump, fixed the post.
    Cat

  • Live cam video im pro email servers trouble

    when i go to email a photo or video it only allowes me to go to outlook express and doesn't let me have the opion to use my yahoo email or even copy into a yahoo email can someone please help
    Message Edited by tlranger12 on 02-20-2009 02:03 PM
    Message Edited by tlranger12 on 02-20-2009 02:05 PM

    no one can help me? plz thx

  • Creative Live Cam Video IM Pro & Kubuntu

    Are there linux drivers available for this web cam? Sure would be nice to be able to use it on something other than Windoze. Or am I just SOL? Thanks,
    Scott

    I am having the same problems. Were you able to find a resolution? Please email be at [email protected] thanks, Bruce

  • Live Cam Video IM Pro - Photo Capture Fails

    I can record video just fine w/the cam center software, but if I attempt to do a Photo Capture, get an error, "Cannot save photo..."? What's up w/that?

    Hi again, Ok I don't know what operating system that your using but I use vista home. I have sorted out the problem and heres how
    1 Uninstalled the software completly.
    2 Restart the pc.
    3 Reinstalled the software without the drivers.
    4 Pulled off vista drivers from creative list of update drivers.
    5 Restarted pc.
    6 Plugged in web cam and windows installed new driver.
    7 Openned up cam manager and hey presto it works.
    It took alot of messing around as I am a new user to vista after upgrading from xp, I hope this helps you to sort out your problem good luck

  • LIVE CAM VIDEO IM pro

    mysystem : pent IV , 2400 mhz ,52 MB ram -- usb2 - ADSL internet !!my question : i chat with skype and the " old " creative ( 460x260 ) minimum the last year -- WITHOUT ONE PROBLEM ---- YESTERDAY i take the NEW ONE from the shop and install ( 800x600 ) and the result :MAXIMAL 5-0 minutes ists work SUPER and than the pic was frozen ? could u give me a TIP for solution ? ( skype last version BETA 3.0.0.06 )thanks and regards from vienna gerhard

    Tobiasze,
    Here's the link to the quick start guide.
    This web camera does not have a built-in mic, you will need an external microphone. Chat software are easily available on their respecti've websites, all you need to do is just google search for it.

  • Drivers for Live! Cam Video IM Pro?

    Where can I find drivers for the Live! Cam Video IM Pro? It's not listed in the driver dropdown at http://us.creative.com/support/downloads/...

    Check again, the driver is available now ..... uploaded on 8 Jan 07.

  • Live! Cam Video IM Pro drivers, GET EM HERE

    Tada,
    The Li've! Cam Video IM Pro drivers :
    http://d.turboupload.com/d/428788/english.zip.html
    nomorecreative sent me the drivers and i'm posting them for you all here.
    enjoy, and creative, seriously, not that hard.

    Check again, the driver is available now ..... uploaded on 8 Jan 07.

  • Live! Cam Video IM Pro (VF0410) HELP!!!!

    i bought this webcam today - Live! Cam Video IM Pro (VF0410) - but i can't get it to show in black and white.
    Anybody who can help getting my webcam black and white?
    thank you!

    I too have the same problem. It seems to be a flaw with the software or the hardware. If you disable the auto exposure setting the frame rate will still site at 4-5 fps.
    If you then move the exposure slider to the far left and then back to the right the frame rate will immediatley increase to 20-30 fps, but the exposure is quite poor even with the adjustment of brightness, contrast, etc. Is this a software bug or a hardware flaw?

  • Creative live! Cam video im pro

    ok first of all my mic isnt working
    it will work with the creative program not aim or any other website like stickam
    also i am only getting 4 frames per second

    I am having the same problems. Were you able to find a resolution? Please email be at [email protected] thanks, Bruce

  • Using Creative Cloud to edit video on multiple computers

    Hello,
    Is there any way that I can use the creative cloud to continually edit a single video across two seperate computers? I've read that the cloud does not currently support video sharing, but I got the impression that this referred specifically to streaming/watching video files.
    I know I could just upload the Premeire Pro Project file, and I'm guessing this would allow me to access all of my edits, but would I then need to copy raw video files onto the second computer and tell Premeire where to locate them? Would I have to do this every time I re-downloaded an updated project file?
    Thanks for any help,
    Jared

    Hey Jared,
    The feature you describe is not currently available. It would make a great feature request for Premiere Pro though.
    Here is a link to the form
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&promoid=EWQQL
    -Dave

  • Using high quailty digital camera video?

    Hi everyone.
    I just got a new digital camera, the Casio EX-S500 and it is a really great camera. The one thing that I am amazed at is how great the video is! I can't tell the difference between a a video camera's footage and my digital cameras footage. When I first got the camera, I had to download a little plug-in thing for Quicktime so that it would play the movie files. I did that... no problems. But when I import the videos into Final Cut Express HD, (the video files are AVI by the way), it will play fine in the Viewer, but when I put it on my timeline, it plays in the canvas the way it did before I got the plug in (A mostly black screen. You can't really make out anything thats happening in the video.) Any suggestions of how I will be able to edit with this?
    Thanks a lot.
    -Dean

    The box of the camera does say that it uses MPEG-4 video, but look at the get info screenshot of one of the files: http://i3.photobucket.com/albums/y88/bballerdean/avi.jpg
    I understand the whole process of getting MPEG video into Final Cut Express. I have MPEG Streamclip and use it all the time. The problem isn't the audio. It's the image. The audio is fine. Final Cut Express does not use the plug-in that I downloaded for Quicktime.
    Here's what I'm talking about.
    (In Quicktime)
    Without the plug-in: http://i3.photobucket.com/albums/y88/bballerdean/2222222222.jpg
    With the plug-in: http://i3.photobucket.com/albums/y88/bballerdean/4thattempt.jpg
    iMac G5   Mac OS X (10.3.9)  

Maybe you are looking for