Trouble using ftp access within DW CS4

I am having trouble accessing my site via ftp through dreamweaver.
Using the same credentials, I am able to access the site via filezilla, but am having no luck with DW.
Any ideas?
Any help is a big help!!
Many thanks

Thanks for you help!
It turns out that I needed to remove the "ftp://" from the ftp address in DW. In filezilla, it needs to be included...
www.internetce.com

Similar Messages

How to use the option "Use FTP Proxy" within file adapter for FTP-Proxy

Hello there,
I'm currently dealing with a problem regarding PI 7.40 file adapter and our proxy server. We have installed our pi system within our LAN behind two DMZ's. So we need to use the ftp-proxy function. But when I try to send a file useing this communication channel I'll geht the following error:
If have asked my system colleagues and they told me to use the ftp-proxy string as used in filezilla:
Is there anyway to use this type of ftp-proxy string within the pi configuration:

Hi Harrish,
I have already found this note but I also found the note
1803398 - File Adapter - FTP Proxy type USER@HOST:PORT support
But as I alread tried the solution I think it's not working
regards
Christian

Trouble using ftp with utf8

hi,
i've got a problem since i use my new notebook (windows 8.1, 64 bit) for ftp sessions. i am not able to edit, up- or download files with umlauts (e.g. "ü, "ä") in file name. i tried 3 ftp-clients (winscp, filezilla, fireftp). in each of them
i checked the option to use the encoding utf8, but it doesn't work. i also tried everything after changing the ftp mode from passive into active in internet explorer. same result. maybe it's important to say, that i firestly made an update from windows 8 to
8.1 before i used the notebook. does anyone have a solution?

It seems that this is designed by default.
The Windows built-in FTP service doesn't support utf8.

Firefox 20 does not support FireFTP, so how do I get FTP access?

FireFTP says it doesn't work with Firefox 20. When I search for add-ons or plug-ins that add FTP functionality, I find none. How do I get FTP access within Firefox?

I have Firefox 23.0.1 but now when I try to use FireFTP I find that all my accounts have disappeared (says choose an account) but the accounts aren't there. I don't know how to get them back and there is no option there to add a new account.
Anyone know how to fix this?

Dreamweaver CS4 FTP Access Denied error

We recently purchased and installed Adobe CS 4 Design Suite. I am trying to install and configure Dreamweaver CS4 to maintain our website.
I had a trial version on a PC which works fine.
I have a Mac OS X 10.5.8 and I installed the newly purchased Dreamweaver CS4 on it. When I try defining a new website as suggested here (http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSBE25912D-A9DE-4ba1-9F85-4C692F5C14ADa .html#WS269BF2C1-74ED-4797-9D9D-6EC283FE7645a)
and connect using FTP, it connects successfully. It shows me local and remote files. But if I try to download any file it gives an error such as:
/sandeepkolte/activities.aspx - error occurred - An FTP error occurred - cannot get activities.aspx. Access denied. The file may not exist, or there could be a permission problem.
If I try to upload a file, it gives an error:
Started: 4/11/10 10:52 PM
about.aspx - error occurred - Access denied. The file may not exist locally, may be open in another program, or there could be a local permission problem.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
about.aspx
Finished: 4/11/10 10:52 PM
I tried installing FileZilla to check if I can upload/download files from website using a ftp client. And I can successfully do that. As I suggested earlier, I can connect, upload/download files from another PC with a older version as well as new trial version of DW on the same home network.
I also tried toggling Passive/Active mode but it did not work.
I have no firewall on Mac OS X. Can you please help me figure out what must be causing this and how to resolve it?
Sandeep

hi,
In the audit log .. I can see
-Connecting to FTP server "123.123.123.123"
-Write to FTP server "123.123.123.123" directory "/TEST/", -> file "abc.asc"
-Transfer: "TXT" mode, size 1 bytes, character encoding 8859_1
-Attempt to process file failed with com.sap.aii.adapter.file.ftp.FTPEx: 550 Access is denied
-MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Access is denied.: com.sap.aii.adapter.file.ftp.FTPEx: 550 Access is denied.
-Exception caught by adapter framework: Access is denied.
-The message status set to WAIT.
i think connection is fine.But its not uploading the file.When i try created a folder in the same location , i can do the same.
My question is that if i can create and delete,then why PI is not posting the file even when i use the same user name and PW to connect.
Regards,
Srini

I'm having trouble using my redemption code to access Lightroom?

Can any one help I am having trouble using my redemption code to access the download of lightroom

i am having the saame trouble with my audio book. I can get music but no longer my book. and it makes me mad. help me too.

ORA-24247: network access denied by access control list (ACL) using FTP

What used to work on our 10g server now doesn't work on 11g. We recently migrated to a new server and this FTP download process is the only thing that is giving me problems.
I have tried using the IP Address and Domain name, opened up the ports 10 to 80 (just in case) and even tried FTPing to a local FTP site and cannot seem to get past the ORA-24247 error. At this point I am not sure what else to try. The FTP process worked great in 10g...
begin
dbms_network_acl_admin.create_acl (
acl => 'cwtoto_acl_file.xml',
description => 'FTP Access',
principal => 'CWT_OPERATOR',
is_grant => TRUE,
privilege => 'connect',
start_date => null,
end_date => null
dbms_network_acl_admin.add_privilege (
acl => 'cwtoto_acl_file.xml',
principal => 'CWT_OPERATOR',
is_grant => TRUE,
privilege => 'resolve',
start_date => null,
end_date => null
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => '69.30.63.173',
lower_port => 10,
upper_port => 80
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => 'ftp.rmpc.org',
lower_port => 10,
upper_port => 80
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => 'ftp.taglab.org',
lower_port => 10,
upper_port => 80
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => '146.63.252.61',
lower_port => 10,
upper_port => 80
commit;
end;
Edited by: tfrawley on Jan 20, 2011 10:23 AM

So, I have contacted support to fix my inability to login to Oracle Support. In the meantime I'll just run through this problem one more time:
I executed the following:
begin
dbms_network_acl_admin.create_acl (
acl => 'cwtoto_acl_file.xml',
description => 'FTP Access',
principal => 'CWT_OPERATOR',
is_grant => TRUE,
privilege => 'connect',
start_date => null,
end_date => null
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => 'ftp.rmpc.org',
lower_port => 1,
upper_port => 1000
commit;
end;
This should give me an ACL xml file and permission for CWT_OPERATOR to connect to ftp.rmpc.org on ports 1 through 1000.
I can look and see if the creation was successful: SELECT host, lower_port, upper_port, acl FROM dba_network_acls t ;
HOST LOWER_PORT UPPER_PORT ACL
1 ftp.rmpc.org 1 1000 /sys/acls/cwtoto_acl_file.xml
Looks good right?
So I test it using the following:
DECLARE
l_conn UTL_TCP.connection;
BEGIN
l_conn := ftp.login('ftp.rmpc.org','21','[email protected]','anonymous');
ftp.logout( l_conn);
END;
And get the following errors:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 246
ORA-06512: at "SYSTEM.FTP", line 49
ORA-06512: at line 4
Has anyone else tried to use UTL_TCP and experienced a simliar issue?

E3000 FTP access question/using Cisco connect after router setup

I have two questions about my E3000 router.
1. If I have already set up my router using the default web address, if I use the Cisco connect software, do I gain any benefit or am I opening up a can of worms? I would like to change my server name and default admin user name stuff, but I don't want to screw with any settings I have. I will be updating my firmware in a day or so, so should I use the software then, or just go about it the way I have already?
2. I have enables FTP access for my USB drive, but I am unsure how to access it from a remote computer. I know using ftp://xxx.xxx.x.x gets me to my Index while connected to my network, but how do I access this off my network? I want to give our parents and family access to pictures, but I''m not sure of the exact address to use. I have looked in the set-up manual, and searched Google and this site, and have found nothing.
Thank you in advance for your help!
Dan

If you have configured your Router using the Cisco Connect software, then you it secure your wireless network with an password. If you have any firewall and antivurs software on your router then it will protect your computers against worms.
To use the FTP feature of your router you need to enable ftp login on your router, which you will find under the storage tab of your router.

Setting up ftp access to my site

I am using DW CS4 to create 3 low traffic sites and am serving the sites from my home desktop iMac. I setup Virtual Hosting to allow access to my sites. I am now trying to allow others to edit parts of the site and I believe that I must enable ftp access to the site. I have enabled port forwarding of port 21 on my router but I am having problems. I do the following to check ftp connection.
In Terminal I enter "telnet www.mywebsitename.com 21" The response comes back "Trying (myIPaddress)...
telnet: connect to address (myIPaddress): Operation timed out
telnet: Unable to connect to remote host"
I am reasonably sure that I must get this to work before I attempt to redefine the remote site definition using ftp within Dreamweaver CS4.
Please be relatively simple with suggestions or questions, I am well aware of the fact that I am a bit of a novice trying to do rather complex things.

Thanks for your help, I now have ftp access to my site working OK. I
have redefined the site using ftp in the Dreamweaver site definitions
and I can upload changes with no problem. However, i am now trying to
setup InContext editing capability to the site. W hen I go thru the
steps to add a site to the InContext Admin section the first steps in
the process work fine. I am able to fill out the ftp settings with my
username and password and when I test the settings it comes back that
it is able to connect to the site. The next step is where I run into
problems. When I try to add the assets I get an error that says
either the folder does not exist or the user does not have the proper
permissions to open the root folder. I have attached a screen shot of
the actual error message if it helps. This is the odd thing. I can
use the same username and password with another ftp Client program and
I have complete access to the root folder and all the files in it. It
seems that if I have adequate permissions to view and change the root
folder with a generic ftp client program I ought to be able to open it
thru the incontext setup. By the way the username and password I am
using to try to get this initially setup is the administrator username
and password for my server, so it seems to me there should not be a
permissions problem.
Am I missing something obvious?
Steve
Here is the error log. Note: www.sonautosales.com is the name of
the root folder on the server.

How do I give third party ftp access?

I have a client who has a "friend" who is an IT guy. He wants FTP access to work on his site's SEO. I created it in Muse with meta-tags on each page. Do I just grant him admin rights as a user in BC?

Hi,
Simply create an admin account for this user from within the admin console via Site Settings > Admin Users. Ensure the role assigned to this user has the permission 'Can use SFTP & File Manager' selected.
For information on how to connect via sFTP, please refer to the following article: kb.worldsecuresystems.com/kb/connecting-your-site-using-ftp.html.
Cheers.

FTP access to documents on iCloud?

I have an IP Cam which I currently use to store captured still images onto my FTP server on a mac mini.
As an alternative I would like to store those images onto my iDisk or documents within the cloud.
The IP Cam supports FTP access (only). Is there a way to make the camera ftp'ing the files into the iCloud?
regards, Oliver.

You can only use iOS pages,numbers and keynote to "store" office documents to the cloud and re-download them to a Mac or PC using a browser at icloud.com/iwork.
The Browser is the only "man in the middle" to bridge the gab between iOS and PC/Mac .

Can't disable my FTP Access ports!

Hi. I'm running MacOS X 10.3.9 on a Mac Powerbook with all of Apple's latest Security Updates installed. I did a virgin installation and no other software programs has been installed yet, and I need to find out if my current indicated FTP settings in the built-in Firewall panel is normal or whether maybe my system has been somehow hacked or attacked by an unknown virus.
In my computer's System Preferences/Sharing/Services panel, all options are currently off, and none of the items are checked. In the System Preferences/Sharing/Firewall panel, all options are also unchecked. But even though I've unchecked all items and they're supposed to be off, my FTP Access port is still showing the description "FTP Access (20-21, 1024-65535 from 20-21). First question - this lengthy description about my ports seem strange. Does everyone else show this same description in Panther, or is it just me?
But even more strange and bizarre is when I hover my mouse over the same FTP Access description, a balloon notation will pop up with the following information . . .
. . . "Ports 20 and 21 on your computer are open for FTP. If others connect to your computer from ports 20 and 21, then ports 1024 through 65535 are open. When you turn on FTP Access in the Services pane, you also allow the service access through the firewall on the indicated ports. To stop access through the firewall you must turn off this service using the Services pane." . . .
Personally, I don't want any ports open on my computer. Therefore this notation seems strange to me, especially considering that all my ports are supposed to be "off", therefore why is this notation still indicating that ports 20 and 21 are open. Even more strange is no matter what I do and no matter what settings I change, I can't alter the configuration of ports 20 and 21 and make them show as closed. I've tried everything, but ports 20 and 21 still remain open no matter what I do, at least according to this message. Question - Is what I'm seeing normal for everyone or are other users showing something different?
Below is an image of what I'm talking about :
http://homepage.mac.com/starshone/misc/PantherFTPAccess.jpg
Thanks in advance. Any help regarding this would be appreciated.
17" Mac Powerbook 1.5GHz Mac OS X (10.3.9)

If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

Problem in Receiver side File Adapter using FTPS mode

Hello,
Here I am facing some problem in receiver side while using FTPS mode in the channel configuration.
The error message which i could see in the audit log is,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: java.lang.NullPointerException
Can anyone help me out in solving this issue ASAP?
I am using Per file transfer mode ni the reciever channel.
Thanks in advance,
Yours
Soorya

HI Surya,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli

Using "Keychain Access" as a Password Manager

Hello All,
While searching for a secure, trustworthy password manager I started wondering why I couldn't just use Keychain Access built into the Mac OS.
I've tried others and they're all nice in their own way but why not use what's already there?
Any suggestions, concerns or gotchas are welcomed.
Thanks in advance for your time.
IAV

You can also change the security settings on your keychain and/or create additional keychains. So you might have one keychain with especially secure settings for certain items and another with less secure settings for others. Moreover, you can adjust some settings for each item within a keychain, as well.
Or you can do what I do which is set up several keychains and then render the whole system entirely pointless by saving the passwords in your original keychain because you are terrified you'll forget them otherwise... (I don't actually know why I set them up this way...)
My login password is not my keychain password and my keychain locks after a minute, I require a password to wake from sleep/screensaver (though this does not always work properly) and sensitive items require re-entry of the keychain password anyway. So you can set things up so your keychain is more secure if you want to, at the price of some increased inconvenience.
- cfr

Error in Rcvr File Adapter using FTP ?

Hi @,
I am getting the follwoing error while trying to put file in the folder thru Rcvr File Adapter using FTP and it is giving me following error :
java.io.FileNotFoundException :(Permission Denied )
I have verified the permissions on the folder and it is having write permissions.
Please suggest Its urgent.
REgards

hi amit,
can you
1. check whether the access to FTP is Authenticated, if so provide the username and password
2. try giving different file name at the receiver end
3. try normal ftp commands to access the folder
regards
Ramesh P

Trouble using ftp access within DW CS4

Similar Messages

Maybe you are looking for