Trouble using one Keihtley 2400 to preform a current sweep to drive a laser diode and use a second to measure a voltage from a laser power meter.

I am trying to drive a laser diode with one 2400 Sourcemeter using a current sweep, while simultainiously measuring the voltage of the analog output of a Thorlabs Pm100a powermeter. I have been attempting to cobble together the triggered measurments example with the sweep and measure example, but I cant quite figure it out.
Attached is the franken-vi I have created.
Any help is greatly appreciated.
Dan R

Are you getting any error codes when trying to run this modified VI? What are the results when running?

Similar Messages

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao.

How correctly using USB 6251 to measure DC voltage

Hi all
I have encounter a problem like in the topic http://forums.ni.com/ni/board/message?board.id=170&message.id=404676&query.id=250408.
I'm sorry for repeating of topic but I've read all of your advices and have not yet resolved problem.
My task very simply: I use USB 6251, differential mode to measure voltage of battery Energizer 1.5V. But result shows >10V ??? Mean.vi shows bigger 4V (see the attached picture)
I don't understand what happed with my task?
Please help me!
Thank so much!
MC
Solved!
Go to Solution.
Attachments:
Acq gragph voltage.JPG ‏22 KB
result of measurement.JPG ‏50 KB

Thank Flaugher
I did not connect bias resistors. But now I do another way: connect possitive pole of battery to the AI0 and other to the AI GRD, choose input configuration "RSE" and get good results.
Attachments:
good results.JPG ‏23 KB

Im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help?

im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help? I ve uninstalled/ reinstalled switched it on and off what next?

Did you try downloading the movie from iTunes on your iPad? I know it takes longer but I'd try that.
Also try to reset all settings.
Settings > General > Reset. Reset all settings.

HEEEEEELP - trouble using Apple ID

Some time ago i changed my e-mail adress and therefore i had to change my Apple ID to the new e-mail. So far so good.
I now have trouble using my Apple ID on my iPhone. It automatically logs on the old Apple ID, but there is no code for that Apple ID anymore. When i use the password i used with my old Apple ID, it will not accept (i have not changed it - only the "username")
When i go into my Apple ID account, the old e-mail adress is deleted (only the new e-mail adress is in my account), so how can it be, that the old Apple ID is the one my phone wants to use?
I have tried changing my password on the old account, by pressing "fotgot password", but the mail to reset my Apple ID is sent to my new e-mail and therefore it is the password to my new Apple ID i'm changing.
I hoped it only was a problem because the old phone had already been logged in with the old Apple ID, but i have just recieved my new iPhone 5s and now i can't get all my previous purchases and stuff to the new phone, because it also wants to use the old Apple ID, and i still have no password.
It is also causing my iCloud to not work proberly.
What to do? Hope someone can help me.

I just skipped the part of the setup with my old e-mail, and did the setups manually when my new phone was done setting up. Now I can use my Apple ID and iTunes and iCould account for the first time in months.
Thank you for your help!

Bootcamp trouble, only one partition shows when windows boots

I recieved my macbook pro today and I am having trouble trying to install windows xp with bootcamp. I create a partition with bootcamp and insert the install disk. The blue screen for windows appears and asks me which partition to choose. There is only one partition that has 131000 MB. This isnt the amount I asked for.
I followed every step. I even found out that other people are having the same problem as me on other forums and I havn't seen a solution yet. Please help me!

Hi and welcome to Discussions,
such 'behaviour' usually is a hint that your Windows XP does not include the SP2 (Service Pack 2) or later, but is a SP1 or earlier.
Check the label of the CD for mentioning of SP2.
If SP1 you can use these instructions http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp to make yourself a XP SP2 Installation CD.
XP SP2 or later is a must for BootCamp to work.
Regards
Stefan

Trouble using AirPlay between iMac and AppleTV

I'm running OS X Lion 10.7.5 and I'm having trouble using AirPlay between iMac and AppleTV (2nd Gen). It used to work fine, but for some reason it just stopped responding. I can see my media on my iMac from AppleTV and I can see AppleTV from my iMac when attempting to use AirPlay. However, when I try to pull or push media from my iMac to AppleTV it just stalls and never loads. AirPlay works fine from my iPhone and iPad with AppleTV - it's limited to my iMac only.
I'm using a Netgear R7000 wireless router and a Netgear AC120 WiFi Extender and as such, I have 4 available wireless networks (2 from the router and 2 from the extender / 2 - 2.4 GHz and 2 - 5 GHz). My internet access is great and my network performance is good across the board. All of my software/firmware is up to date (iMac, AppleTV and router/extenders). I've tried all combinations (mixing/matching) all of my wireless networks between devices (iMac/AppleTV) - nothing makes a difference (again, AirPlay works fine between my mobile devises/AppleTV). Netgear Genie has been making changes to my network settings as new firmware has been installed in both the router and extender. I'm guessing there is something screwy going on with the network settings on the iMac, but I can't figure it out.
Anyone have any suggestions?
Thanks!

I'm glad you got it all working. Out of interest, how do you (or your son) connect to the internet now? Is it just a dial-up connection? If it is, I am sure you know that, even if you get the Apple TV to share the connection, the speed will seriously limit the use of many of the Apple TV's features.
The Airport Extreme is a great router but you will need a DSL or cable modem as well as it won't connect to the internet without one. There are many great (and cheaper!) combined modem/routers available if your son wants to get a high-speed network up and running at lower cost. Any other computers, phones, games consoles etc that you may have in the house can then all connect easily.
I hope that I have helped a little and I will look out for future posts in case I can help again.

I am having trouble Trouble implementing one-way SSL on WebLogic 9.2...

I am having trouble Trouble implementing one-way SSL on WebLogic 9.2. I am using Demo Identity and Demo Trust certificates with a SSL Listen Port Enabled on 7002, and a Two Way Client Cert Behavior of Client Certs Not Requested. I assume that by using Client Certs Not Requested that there is no need to install certificates on user's computers.
When weblogic is restarted, I get the following log telling me it works...
<Sep 11, 2012 9:35:16 AM PDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\bea\WEBLOG~1\server\lib\DemoIdentity.jks.>
<Sep 11, 2012 9:35:17 AM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\bea\WEBLOG~1\server\lib\DemoTrust.jks.>
<Sep 11, 2012 9:35:17 AM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file e:\bea\jdk150_12\jre\lib\security\cacerts.>
<Sep 11, 2012 9:35:17 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.9.20.172:7000 for protocols iiop, t3, ldap, http.>
<Sep 11, 2012 9:35:17 AM PDT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.9.20.172:7002 for protocols iiops, t3s, ldaps, https.>
However, when I open the console in https://server:7002/console, I get the following error in log file...
<Sep 11, 2012 9:43:45 AM PDT> <Warning> <Security> <BEA-090481> <NO_CERTIFICATE alert was received from x.y.z.com - 10.37.10.54. Verify the SSL configuration has a proper SSL certificate chain and private key specified.>
<Sep 11, 2012 9:43:45 AM PDT> <Warning> <Security> <BEA-090508> <Certificate chain received from x.y.z.com - 10.37.10.54 was incomplete.>
I do not understand why I am getting this error when I assume there is no need to install certificates on user's computers. Can't someone please explain what is going on? Thanks in advance.

<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/security/extension http://www.bea.com/ns/weblogic/90/security.xsd http://www.bea.com/ns/weblogic/90/security/xacml http://www.bea.com/ns/weblogic/90/security/xacml.xsd http://www.bea.com/ns/weblogic/90/security http://www.bea.com/ns/weblogic/90/security.xsd http://www.bea.com/ns/weblogic/920/domain http://www.bea.com/ns/weblogic/920/domain.xsd http://www.bea.com/ns/weblogic/90/security/wls http://www.bea.com/ns/weblogic/90/security/wls.xsd">
<name>nctcis</name>
<domain-version>9.2.3.0</domain-version>
<security-configuration>
<name>nctcis</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType">
<sec:name>DefaultAuthenticator</sec:name>
<sec:control-flag>SUFFICIENT</sec:control-flag>
</sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:name>DefaultIdentityAsserter</sec:name>
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
</realm>
<default-realm>myrealm</default-realm>
<anonymous-admin-lookup-enabled>true</anonymous-admin-lookup-enabled>
<credential-encrypted>{3DES}PyUkjWRp8JGpk75BYSbvQ6OWYgA9SZq2nj2IuENa2vxrMy835GMRZ+GGKhJiWapjt0mMC2ohcxxlIMNUZJUH2gCjbB5kQUmA</credential-encrypted>
<node-manager-username>system</node-manager-username>
<node-manager-password-encrypted>{3DES}KmaZDZGQC6spYVY12CbJGA==</node-manager-password-encrypted>
</security-configuration>
<jta>
<timeout-seconds>1800</timeout-seconds>
<abandon-timeout-seconds>3600</abandon-timeout-seconds>
<max-transactions>100000</max-transactions>
<max-resource-unavailable-millis>100000</max-resource-unavailable-millis>
</jta>
<log>
<name>nctcis</name>
<file-name>e:/netcracker/logs/wl-domain.log</file-name>
<file-min-size>5120</file-min-size>
</log>
<server>
<name>nctcisAdmin</name>
<ssl>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>false</hostname-verification-ignored>
<client-certificate-enforced>true</client-certificate-enforced>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
<server-private-key-alias>tcisdevbpagov_cert</server-private-key-alias>
<server-private-key-pass-phrase-encrypted>{3DES}T21dXO5l79SRI+xSmGOE+A==</server-private-key-pass-phrase-encrypted>
<use-server-certs>false</use-server-certs>
</ssl>
<log>
<name>nctcisAdmin</name>
<file-name>e:/netcracker/logs/weblogic.log</file-name>
<file-min-size>5120</file-min-size>
</log>
<listen-port>7000</listen-port>
<web-server>
<name>nctcisAdmin</name>
<web-server-log>
<name>nctcisAdmin</name>
<file-name>e:/netcracker/logs/access.log</file-name>
<file-min-size>5120</file-min-size>
</web-server-log>
</web-server>
<listen-address>tcis.dev.bpa.gov</listen-address>
<key-stores>DemoIdentityAndDemoTrust</key-stores>
<custom-identity-key-store-file-name>E:\bea\jdk150_12\bin\tcisdevbpagov_identity.jks</custom-identity-key-store-file-name>
<custom-identity-key-store-type>JKS</custom-identity-key-store-type>
<custom-identity-key-store-pass-phrase-encrypted>{3DES}T21dXO5l79SRI+xSmGOE+A==</custom-identity-key-store-pass-phrase-encrypted>
<custom-trust-key-store-file-name>E:\bea\jdk150_12\bin\tcisdevbpagov_trust.jks</custom-trust-key-store-file-name>
<custom-trust-key-store-type>JKS</custom-trust-key-store-type>
<custom-trust-key-store-pass-phrase-encrypted>{3DES}I++r0/FEMRGFrqF47pYZJA==</custom-trust-key-store-pass-phrase-encrypted>
</server>
<embedded-ldap>
<name>nctcis</name>
<credential-encrypted>{3DES}i51JYfmoGyFTxPjiCjjtXWwza1t13k56Ls7fmdqtKB0=</credential-encrypted>
</embedded-ldap>
<configuration-version>9.2.3.0</configuration-version>
<app-deployment>
<name>NetCracker</name>
<target>nctcisAdmin</target>
<module-type>ear</module-type>
<source-path>applications\NetCracker</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>pictures</name>
<target>nctcisAdmin</target>
<module-type>war</module-type>
<source-path>e:\pictures</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<jms-server>
<name>NCJMSServer</name>
<target>nctcisAdmin</target>
<temporary-template-resource>NCJMSModule</temporary-template-resource>
<temporary-template-name>NetCrackerTemplate</temporary-template-name>
<message-buffer-size>100000</message-buffer-size>
</jms-server>
<self-tuning>
<max-threads-constraint>
<name>MaxThreadsConstraint</name>
<target>nctcisAdmin</target>
<count>40</count>
</max-threads-constraint>
<work-manager>
<name>default</name>
<target>nctcisAdmin</target>
<max-threads-constraint>MaxThreadsConstraint</max-threads-constraint>
<work-manager-shutdown-trigger>
<stuck-thread-count>1000</stuck-thread-count>
</work-manager-shutdown-trigger>
</work-manager>
</self-tuning>
<jms-system-resource>
<name>NCJMSModule</name>
<target>nctcisAdmin</target>
<sub-deployment>
<name>BEA_JMS_MODULE_SUBDEPLOYMENT_NCJMSServer</name>
<target>NCJMSServer</target>
</sub-deployment>
<descriptor-file-name>jms/ncjmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<admin-server-name>nctcisAdmin</admin-server-name>
<jdbc-system-resource>
<name>NetCrackerDataSource</name>
<target>nctcisAdmin</target>
<descriptor-file-name>jdbc/NetCrackerDataSource-5713-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>NetCrackerDataSourceNonTX</name>
<target>nctcisAdmin</target>
<descriptor-file-name>jdbc/NetCrackerDataSourceNonTX-6926-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
</domain>
Edited by: user6904153 on Sep 12, 2012 6:57 AM

Having trouble after osi7 on my iPad, I have one contact that won't recognize a number? Also can't move and scale a photo for wallpaper.

Having trouble after osi7 on my iPad, I have one contact that won't recognize a number? Also can't move and scale a photo for wallpaper.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Trouble using a website.

I am have trouble using a forum over at richdad.com I am only able to see the first page of a topic and can't navigate to the next page. I checked if this was a problem with the site or if it was just my computer. Using a windows computer I was able to navigate to the next page, so that makes me think it has to do something with my computer. Anyone know what could be going on? I am on a 1.8 GHz PowerPC G5, OS X 10.5.8.

I don't know what browser you are using, but try a different one. FireFox Safari etc. Some sites work in some browsers and not all.
Good Luck

Has anyone had trouble using Adobe Support on line?

Has anyone had trouble using the Adobe support on line? For two days, I have tried to use the support system which requires a phone call and being put on hold or a call back of up to one hour wait long. Four or five times my call was dropped shortly after the agent began to work with me.. One female agent was unable to find my adobe Lightroom serial # registered, so threatened to drop the call. My # was used a couple of days to download Lt. Rm 3.6. I asked to speak with her manager, she put me on hold, and hung up the phone after 20 mintues. I did get her name in case anyone from Adobe is interested. I tried again and again to get help, but each time it ended in a hang up. Does any one know how to get to an agent who can really help? I am beyond frustration.

Try asking your question here, instead. There are lots of people here with great expertise, even though we don't work for Adobe.
Hal

Trouble using networked printer

I am a new iMac user with quesiotns regarding netowrked printing. Any advice/explanations would be appreciated.
I am using an Epson RX580 printer which is physically connected to a Windows PC. I am able to print from the Mac over a wireless connection through a Belkin router and the PC. I was running into trouble with print quality when printing photos (faint pictures) as well as text (dot matrix quality) from the Mac. I checked on the Epson website which advocated NOT using the Gutenprint drivers. I downloaded the latest driver from Epson's website. However, I do not know how to find that driver to identify it as the one to use. In the Print dialog box, I chose the Epson SP RX580 driver, which looks like just one of the long list of provided Apple drivers, so I do not know if it is actually the updated driver or not. In any case, when trying to print using this driver, the whole process locks up when I click on Print for some reason, and then I have to do a Force Quit.
My questions:
1. How can I find out if the proper driver has been downloaded and installed?
2. I have read posts on this forum suggesting incompatibility issues with Epson printers and Macs. Is there any truth to this? I note that Epson's website seems to give instructions regarding avoidance of Gutenprint drivers on computers running OS X 10.5, so I assume the Epson printers are ok to use if the right driver is used.
3. I have not tried direct connecting the printer to the Mac, but wonder if my problem may be due to the network situation. Obviously, I am able to print with the Gutenprint driver, so it isn't an issue of the Mac finding the printer, but rather of print quality.
4. I have contacted Epson as well, but am not sure how much help they will be, so wanted to see if I could get any answers from this forum.
Thanks.

Michael Bernstein1 wrote:
I have downloaded the Gutenprint drivers and installed them. I added the printer using "Print & Fax" and clicked on Windows to locate the printer. I can print to the printer now. However, the print quality is still lacking. I have tried to adjust the print settings, but can't get it right. I want to print text docs, but also photos from the Mac through the network outlined above.
In general, I recommend that you use a higher quality setting such as "High" rather than "Standard" for most Epson printers. For photos, I would suggest that you set "Color Precision" to "Best". Also be sure to set the "Image Type" to the proper setting for the job you are printing. There are options for Text, Text and Graphics, Photograph, etc. You may also find that setting the Composite Gamma to 0.8 will improve the output.
Also, my "borderless" photos (4x6) still come out with a very thin border...
Did you set the printer feature to print borderless? What about the setting to Expand to maximum print area rather than Shrink to fit the page?
Any other tips?
There are almost too many settings with the Gutenprint drivers. If you are often switching between text and photograph printing, you may want to create Presets for the different settings.
Matt

I'm having trouble using my redemption code to access Lightroom?

Can any one help I am having trouble using my redemption code to access the download of lightroom

i am having the saame trouble with my audio book. I can get music but no longer my book. and it makes me mad. help me too.

Dictionary has trouble with one of its fonts... How to solve?

Hi everyone,
My problem is the following: the OS X Dictionary app has severe trouble displaying one of the fonts it uses, I assume it should be Baskerville Italic (Bold Italic gets displayed correctly). See the following screenshot:
I have pretty much tried everything: resetting system fonts via Font Book, manually de- and reactivating the fonts Dictionary uses (Baskerville, Helvetica Neue, and Hiragino Mincho Pro W3; they're all active now) and checking whether I have other fonts that OS X could possibly confuse with one of the system fonts (I have a large font library with many duplicates from art school). Nothing helped.
Anybody had a similar problem and found a solution for this?
On a related, but less important note: when I reset all system fonts with Font Book (which should throw all fonts that are not included in OSX in a separate folder and deactivate them, as far as I understood it), nothing happened, except that he told me all my system fonts are fine. Could it be that installing new versions of OSX over older ones confuses the system about which are system fonts and which aren't?
And: I cannot find Baskerville in the system font folder at /System/Library/Fonts. Isn't it supposed to be there if Dictionary uses it?
Thanks for any help!

mentalmenthol wrote:
In addition to those I had separate font files called e.g. "Cyrillic A Upright", "Greek Inclined" etc. that would apparently only include the respective character sets (counting around 200-250 characters each). These are the ones I deactivated entirely
Thanks for the explanation! Those separate font files are what I meant by "junk", but that is not really a good term in this case, they are just using a non-standard encoding which is potentially incompatible with the Unicode standard used by OS X. Lion's expanded Baskerville is the Unicode replacement for them.
It is quite common for OS X to get confused by fonts like that which map symbols to Latin instead of their correct Unicode assignments. Helvetica Fractions and Times Phonetic have caused similar problems for many users in the past.

TS4062 I replaced my iPad with a new one. I backed up to iCloud but did not do a physical iTune Sync. Now I am having trouble recovering some Notes and Photos. I have been reinstalling Apps from the App Store. How do I recover my Notes?

I replaced my iPad with a new one. I backed up to iCloud but did not do a physical iTune Sync. Now I am having trouble recovering some Notes and Photos. I have been reinstalling Apps from the App Store. How do I recover my Notes?

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

Trouble using one Keihtley 2400 to preform a current sweep to drive a laser diode and use a second to measure a voltage from a laser power meter.

Similar Messages

Maybe you are looking for