Trouble using Safari on start-up with pop-up error
Hi,
I'm having trouble using Safari. Every time I open up the application, a small screen popped up saying "Error- Failed to load the FastBrowserSearchPlugin plugin.* -[BrowserWindowController currentWebView]: unrecognized selector sent to instance 0x7aa570". What can I do to get rid of this issue. I am assuming it has something to do with the Fast Browser Search engine located on the top right of the safari app. Help me please! Any help will be appreciated. Thank you.
HI and welcome to Apple Discussions...
You need to uninstall that plugin.
Go here for instructions on how to remove it.
http://help.fastbrowsersearch.com/
I think you'll find it in: ~/Library/Internet Plugin-ins
~ (Tilde) represents your Home folder.
Carolyn
Similar Messages
-
On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.
I am now able to do live broadcasts with my i-sight, but my original problem still exisits....
Unsolved Problem:I need to be able to broadcast from CamTwist as CamTwist is the only program that will allow me to do what I need to do. Justin.tv and Ustream.tv do not recognize CamTwist for reasons I can not explain. -
I use Safari in my imac with Google as my search engine. Recently, Bing took over. Extensions still shows Google as default search engine. Search starts as Google but switches to Bing. How do I get rid of Bing, go back to Google?
Hey ravenbird1,
Thanks for the question. After reviewing your post, it sounds like you want to use a specific search engine.
Safari 7 (Mavericks): Search the web
http://support.apple.com/kb/PH17150
To set the default search engine, choose Safari > Preferences, then click General.
If you are having problems with extensions you can uninstall and reinstall the extension.
Safari 7 (Mavericks): Install and update Safari extensions
http://support.apple.com/kb/PH17200
Select the extension, then click Uninstall.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Am using Safari 4.1.3 with system 10.4.11 and can only come up with advances preference page when calling up security - thus cannot see cookies. I have Safari 5.0.6 on my MacBook. Will it run on my older machine? Can I transfer older bookmarks to the new software?
Machine Serial Number: W8*********AR
<Personal Information Edited by Host>Safari preferences has no...
-
All of a sudden my MBP will not load Facebook using Safari. Loads ok with Firefox. Any ideas?
Hey aj5c,
Let's see if resetting Safari helps the issue:
Safari 6 (OS X Mountain Lion): Reset Safari
http://support.apple.com/kb/PH11914
For best results, make sure all of the options are checked.
Thanks,
Matt M. -
Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error. Is this a know issue or has someone been able to successfully install?
Sorry, we haven't tested Firefox on this device yet, and we aren't sure why it isn't working. If anyone (especially with Android development experience) would like to help us debug this problem, please start by creating an account and submitting a bug report at: https://bugzilla.mozilla.org/
Thanks for the report. -
Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Trouble using facetime on another device with same apple id
Hi
I am having trouble using facetime with my wife. I have an iPad 2 and she has an IPhone 4S. When we try to facetime, we are able to connect for a few seconds and then it drops off. We are then unable to reconnect. We both have the same apple Id and e-mail address although I am trying to contact her via her mobile number. Any suggestions would be grateful received.Get an email address (free gmail.com) to use on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Is there anybody who can help me fix this issue? I encountered this problem for almost to weeks now. I can't play video on You Tube using Safari browser for my MacBook Pro. Every time I tried to play video on You Tube. It shows
"500 Internal Server Error"
Sorry, something went wrong.
A team of highly trained monkeys has been dispatched to deal with this situation. (Followed by codes)
When I checked my other computer using Google Chrome and Firefox browser. There is no problem in playing You Tube videos.From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. -
IPhoto does not start up with incompatible Prokit error
i installed the new version of iphoto 9.3 ( as prompted by software updates). post installation, iphoto does not start up. it throws an error " incompatible prokit framework".
I have Mac OS 10.8 too and it won't run the last versions of both iPhoto and Aperture. It does work with earlier versions (Aperture 3.2.2 and iPhoto 9.2.3).
I suggest you to downgrade iPhoto rather than the OS as in less than one week Mac OS 10.8 will be released and hopefully you will be able to update it and to run the last version of iPhoto with it.
By the way, I think that my grandmother upgraded to this new OS but I don't know how to downgrade it.. LOL -
[Reopened] qtcreator starting slow with at-spi error
Hi
After the qt update qtcreator is starting slow. After seconds of nothing happending the following message is printet to the stdout:
[user@ArchBox ~]$ qtcreator
xQt at-spi: error getting the accessibility dbus address: "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Accessibility DBus not found. Falling back to session bus.
Only solution i found was removing at-spi as a workaround. But Gtk3 depends on it so this is not possible. Any suggestions?
Thanks, regards
Archdove
Last edited by Archdove (2013-03-07 12:20:36)Ok. So i removed all the qt stuff and deleted even the projects. Result is that it is starting fast now. The error however remains.
Solved for me.
Edit: Reopened. Back to slow startup after the first try.
Last edited by Archdove (2013-03-07 12:20:57) -
I have an iMac with OS version 10.6.8. Firefox is 5.0.1. I have never had this trouble before in the two years I have been paying Citicard bills on line. The trouble started over the weekend.
i had one mac and spilt water on it, the motherboard fried so i had to buy a used one...being in school and all. it is a MC375lla
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
8 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0E
SMC Version (system):
1.62f7
Hardware UUID:
A802DE22-1E57-5509-93C5-27CEF01377B7
Sudden Motion Sensor:
State:
Enabled
i do not have a backup of it, so i am thinking about replacing my old hard drive from the water damaged into this one, not even sure if that would work, but it did not seem to be damaged, as i recovered all the files i wanted off of it to put onto this mbp
the previous owner didnt have it set to boot, they had all their settings left on it and tried to edit all the names on it, had a bunch of server info and printers etc crap on it. i do not believe he edited the terminal system though--he doesnt seem to terribly bright(if thats possible)
tbh i hate lion compared to the old one i had, this one has so many more issues-overheating,fan noise, cd dvd noise
if you need screenshots or data of anything else as away
[problem is i do not want to start from scratch if there is a chance of fixing it, this one did not come with disks or anything like my first. so i dont even know if i could, and how it sets now i am basically starting from scratch, because now all my apps are reset but working, i am hoping to get my data back somehow though, i lost all of my bookmarks and editing all my apps and setting again would be a pain -
Trouble using Safari on iPad Air
Hey guys. I'm having trouble with my iPad Air. When I'm online using a web page, safari just closes down on me out of the blue and I lose all my info. At first I thought the problem occurred with one particular page, but then I got the same problem while being on random pages. The tech people at the Apple store advised me to make sure I close all apps to avoid overloading the iPad, but even so the problem persists.
Any ideas and/or suggestions will be greatly appreciated!
Thanks a bunch.reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde -
Cant use Safari 4.0.3 With Snow Leopard
Upgraded to Snow Leopard... Then I click on Safari I get this box that pops ups "You can't use this version of the application Safari with this version of Mac OS X." But I have the most current version of safari.. I try to redownload it..it says it cant be installed on this drive that it must be used with version 10.5 or newer..
Are you trying to open Safari by clicking the link on the dock? My friend had this issue on his MacBook and it was solved by removing the link from the dock and creating a new one from the Applications folder. Easy way to check if the link is the problem is by trying to open Safari directly from the Applications folder.
I'm assuming something goes wrong with the link during the upgrade process in this case. -
I am having trouble using analog triggering on PFI0 with PCI-6110
I am having trouble with analog triggering. I am trying to use PFI0 as an anlog input for triggering purposes and this is on a PCI-6110 card. I am outputing a 10Hz 5Vpp triangle wave signal from an analog output channel and inputing it into PFI0. I am configuring the trigger with the code listed at the bottom. When I start the data acquisition is not triggered. If I increase the frequency up to about 480-500Hz then the trigger will start and then I can actually move the frequency back to 10Hz and it will continue to trigger. Also if I leave the code the same and the waveform the same but switch the trigger type to cwaiHWdigital then it will trigger at the 10Hz level. I suspect that this may have something to do with the coupling of the PFI0 input but I am not sure if this is the case and if it is I do not know how to configure the coupling of PFI0 in measurement studio VB. Any thoughts would be appreciated.
cwaiDAQ2.StartCondition.Source = "PFI0"
cwaiDAQ2.StopCondition.Type = cwaiContinuous
cwaiDAQ2.StartCondition.Type = cwaiHWAnalog
cwaiDAQ2.StartCondition.Mode = cwaiFalling
cwaiDAQ2.StartCondition.Level = 2
cwaiDAQ2.Configure
cwaiDAQ2.StartI tried increasing the voltage and this did not seem to have nay affect on the frequency that it started triggering. I also tried to lower the trigger level. As far as trying other PFI's I dont believe I can. As fas as I can tell PFI0 is the only one that can be used as an analog input and analog trigger.
I looked at the article in the knowledge base 2ZD9B3W3 and it seems to be a similar problem. I tried to replicate the code in my program but I really have no experience with NI_DAQ function calls in visual basic so maybe I am doing it incorrectly. I did not get any errors but the NI_DAQ function calls are mixed in with CWAI measurement studio function calls so maybe when I configure cwai it resets what I have just changed with NI_DAQ. I could really use some specific direction on how to succesfully set PFI0 to DC coupling with the CWAI control or how to mix measurement studio and NI_DAQ functions.
Maybe you are looking for
-
CrystalReportViewer in WPF - win32 exception on application closing
Hello! I'am using the CrystalReportViewer Control in a WindowsFormsHost control as the rest of the application is made in WPF. If the application is closed when a Report is open, the "Visual Studio JIT" Debugger windows is opened informing me that an
-
Procedure handle in Query manager
Sir, I want to execute the user stored procedure in query manager with the following statement " exec [Pr_AgingReport_NewN] '04/01/2009' , '03/27/2010','XYZ', null,'C',null " i am getting SAP Message & error as follow " 1).[Microsoft][SQL Native Clie
-
Anyone know when Bluetooth stereo receiver CB2500 comes o
Hi, I might be very interested in this stereo bluetooth receiver/transmitter but sadly there is not much info yet(review,autonomy and build and sound quality) This piece of hardware will be much more useful to me than an already equipped BT headset,
-
Just installed DW trial and it says I have one use left?!
So I've been having troubles getting the CS4 DW trial to work. It would crash at the loading screen. Every other CS4 app works fine. I finally figure out the problem, which was Acer e-Security software. So I uninstall that and reinstall CS4 and unins
-
[VB] Like operator not functioning?
I'm trying to create the following statement in my VB code, but I'm getting a "Sub or Function not defined" error. My question is, how do you use the Like operator with InDesign scripting? InDesign doesn't seem to recognize the Like operator. "myCurr