Trouble using the instrument driver for the "hp8753b"

I am using the instrument driver for the "hp8753b", specifically the "collect and display data" driver. I manually set my settings to the analyzer and run the VI (i.e. set start frequency to 500 kHZ and stop frequency to 1 GHz), when the VI runs with the "collect and display data" it defaults to start frequency 1 GHz and stop frequency to 3 GHz. I have tried to modify the driver to only collect data and not to modify any settings on the analyzer but I run into errors. Any help on this is appreciated.

Hello,
I have installed the instrument driver you mention in your post. I am looking at the Collect and Display Data.vi, however I need more information from you to determine why your sweep is defaulting back to 1GHz-3GHz.
When you say "I manually set my settings to the analyzer" are you making these settings directly on the analyzer? The Collect and Display Data.vi seems to read all of the settings from the hardware, I did not see any configuration in the VI. What modifications were you making to the VI and what errors were you getting?
Can you see the range on the instrument? If so , can you determine at which point the range defaults back to the higher range? Running in highlight-execution mode in the VI and running NI-Spy (Start->All Programs->National Instruments->NI-Spy) to perform a capture of the GPIB commands can help to determine at what point the errors are occurring. It will also let you see if there are any commands being sent which cause the instrument to be reset.
Jennifer O.

Similar Messages

Can someone tell me the correct driver for the fuji xerox docuprint p205b for os x as the one on the fuji site does not work thank you!

I am desperate to find the correct driver for the p205b docuprint priner i know that the one on the fuji site is wrong and you need to install a driver for anothe rmodel as I found this in a forum last year and successfully installed on another mac but now I don't know where I got the info from, help !!! =)

I have the same printer and I'm using Lion 10.7.4.
I'm facing problems getting the mac to print via wireless.
I've installed the driver from http://support.apple.com/kb/DL904 as suggested by sig.
I've linked up the printer to the router via usb. It works like a charm with usb on Lion and wireless on windows.
Could anybody help ? I've included photos for more information. Many thanks.

CONFUSION ON WHAT IS THIS NOTEBOOK SO TO GET THE CORRECT DRIVER FOR THE SOUND CHIP

THE BOTTOM OF THIS NOTEBOOK SAYSIT IS:
PRODUCT: HP PAVILION dv 1000
SN#[Personal Information Removed]
PN# PM054UA#ABA
NOW WHEN I PUT IN THE PN# IT BRINGS UP
HP Pavilion dv1040us Notebook PC Drivers
IS IT POSSABLE THAT THIS WAS BUILT AT THE TIME OF THIS CHANGE. THE SOUND DRIVER FOR THE 1000 DOES NOT MAKE A CHANGE AND THERE IS NO SOUND BY THE BUILT IN HARMAN/KARDON OR HEADPHONES.
MAYBE IT IS A BURNT OUT CHIP AND IF SO WHAT SOFTWARE CAN I USE TO TEST THIS?
I HAVE TRIED ALL I KNOW AND AM OPEN TO SUGGESTIONS. DO I CHANCE USING THE DRIVERS FOR THE 1040?
THANKING ANYONE FOR ANY SUGGESTIONS. J
This question was solved.
View Solution.

Hi,
The following link shows the specs of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00247186
Yes, it is a dv1040us and its product number is PM054UA#ABA. Tis must be very old machine because I can't find more than:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=43374...
For sound, please try Conexant CX20468-31 AC97 Audio Driver:
http://ftp.hp.com/pub/softpaq/sp28001-28500/sp28481.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
== This happened ==
A few times a week
== A week and a half after i installed Fox Filter. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

Hello Steve.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

I would like to use an external drive for the iPad I just purchased for my husband? How can I accomplish this is there an accessory that would allow me to use a USB

I would like to use an external drive for storage on the ipad I just purchased. How can I do this?

You can't attach drives to any iOS device.
Having said that, there are some drives with built-in wifi routers that a device can connect to. These would behave like a cloud device in which some of your apps might be able to connect.
Try googling to find some brands.

Is any one has the instrument driver for APD-Vp series servo motor(manufacture is Metronix in korea) for labView7.1?

Please help me.
Thanks

Hong Zhang,
The Instrument Driver Group gathers requests and may or may not come out with particular drivers based on demand.
We have some excellent online tutorials that should help you out:
http://www.ni.com/devzone/idnet/ is a must starting point for tips/information on developing your own driver. The following site specifically talks about LabVIEW instrument drivers:
http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&64325190560C97CE86256E4A006F27F1
If you have any specific questions feel free to post back and we'll see what we can do!
(also have you contacted the instrument manufacturer to see if they have one or would be willing to develop one?)
Craig H.
NI Applications Engineering

Using the Oracle Driver for the Engine DataSource

Hi -
When we try to use the Oracle driver (not the WebLogic Oracle Driver) we get the following exception. We would like to use the Oracle driver and not the WebLogic driver. Is this possible with 10gR3?
fuego.transaction.DatabaseException: An error occurred while accesing the database.
Detail:SQL statement: 'SELECT WKTDKEY, DUETIME, ID, PROCESSID FROM PWKTODO WHERE WKTDKEY = ?'
at fuego.server.persistence.jdbc.JdbcToDoItemPersMgr.getWKItem(JdbcToDoItemPersMgr.java:548)
at fuego.server.persistence.Persistence.getWKToDoItem(Persistence.java:518)
at fuego.server.service.DirectoryListener.stopDirectoryPollingToDoItem(DirectoryListener.java:282)
at fuego.ejbengine.service.EJBDirectoryListener.access$100(EJBDirectoryListener.java:26)
at fuego.ejbengine.service.EJBDirectoryListener$1.execute(EJBDirectoryListener.java:70)
at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:79)
at fuego.server.execution.DefaultEngineExecution.executeWithoutComponentImmediate(DefaultEngineExecution.java:185)
at fuego.server.execution.EngineExecution.executeWithoutComponentImmediate(EngineExecution.java:86)
at fuego.ejbengine.service.EJBDirectoryListener.start(EJBDirectoryListener.java:56)
at fuego.server.service.AbstractService.changeRunLevel(AbstractService.java:99)
at fuego.server.service.AbstractService.setRunLevel(AbstractService.java:52)
at fuego.ejbengine.service.EJBDirectoryListener.initialize(EJBDirectoryListener.java:42)
at fuego.ejbengine.Engine.startServices(Engine.java:414)
at fuego.ejbengine.Engine.start(Engine.java:126)
at fuego.ejbengine.ItemExecutionBean.ejbCreate(ItemExecutionBean.java:68)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.manager.MessageDrivenManager.createBean(MessageDrivenManager.java:307)
at weblogic.ejb.container.pool.MessageDrivenPool.createBean(MessageDrivenPool.java:174)
at weblogic.ejb.container.pool.Pool.createInitialBeans(Pool.java:300)
at weblogic.ejb.container.manager.MessageDrivenManager.start(MessageDrivenManager.java:581)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.mdManagerStart(MessageDrivenBeanInfoImpl.java:1163)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.deployMessageDrivenBeans(MessageDrivenBeanInfoImpl.java:1143)
at weblogic.ejb.container.deployer.EJBDeployer.deployMessageDrivenBeans(EJBDeployer.java:1587)
at weblogic.ejb.container.deployer.EJBDeployer.start(EJBDeployer.java:1410)
at weblogic.ejb.container.deployer.EJBModule.start(EJBModule.java:589)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.sql.SQLException: Invalid column type
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:229)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:403)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7931)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7511)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:7984)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:237)
at weblogic.jdbc.wrapper.PreparedStatement.setObject(PreparedStatement.java:287)
at fuego.jdbc.FaultTolerantPreparedStatement.setString(FaultTolerantPreparedStatement.java:436)
at fuego.server.persistence.jdbc.JdbcToDoItemPersMgr.getWKItem(JdbcToDoItemPersMgr.java:479)
... 56 more

Only the weblogic oracle drivers are supported in 6.0 and 10gR3 for the Directory and Engine datasources.

Question about the Intel driver for the IDE controller

Greetings to all:
Lenovo has recently published another driver for the IDE controller and I wonder how many of you that have a T60, T60p, T61 and T61p have been able to actually install it.
My controller device is:
Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4,
both in XP-SP3 as in Vista SP1, 32bits versions ( see bellow details of my T60p, which has 2 hard drives)
Interestingly enough the driver on each is v:7.0.0.1020 (2005/05/23) for XP and v:6.0.6001.1800 (2006/06/21) for Vista-B. They are working well as far as I see, but now and several times before, I have tried to update them but they do not install. The message is that I have already the best driver. I noticed that the label of the controller is not quite exactly spell out in the instruction text file or the .inf, and the one that comes close, is that of the so call ICH7-M family.
Why is this? There are at least 7 versions discussed in the history. It it perhaps because the one for the ICH7-M family is always the same? System update does not install them either.
Forgive my curiosity but why bother publishing if they can not be installed? Or perhaps somebody has. This is not logical.
Cheers.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock
Solved!
Go to Solution.

For those who think I can not follow directions.
First, the driver for the Intel IDE device in a T60p is obviously from Intel. But there are two ways to get it fulfilled.
Lenovo publish the Intel drivers with perhaps there own twists, refinements and in the absence of clear contrary information, that they are perhaps more fine tuned to the machine. It uses the following inf files to have them install: iaahci.inf and iastor.inf. They are revised whenever Lenovo fell is necessary and eventually published.
I must assume they are in use if you have a Vista system originally installed by Lenovo and that is why those inf are the ones you find in the updates.
Mi T60p was purchased 2 years ago with XP-Pro, just before the release of Vista, with the understanding of a free upgrade to Vista-B shall be send when finally released. An Indeed they keep their word and send me a Lenovo branded full version of MS Vista-Business, some 4 months latter (not an image). Rather than upgrade XP-Pro and to avoid the time in limbo and work interruption of the Vista less desirable over XP, I did a successful clean install into a new hard drive, followed by a Lenovo system update, which changed many drivers and installed programs, etc. But as you might imagine, the Intel IDE-SATA driver installed is the one provided by MS (v:6.0.6001.1800 of 2006/06/21), (which uses a different installation file mshdc.inf) and, until proven otherwise, I must assume more generic, since it is for any and all machines, following the standard of the hard drive SATA type.
Talking to Lenovo support for nearly 1 1/2 hours last week, was at least not good for my blood pressure, while attempting to explain the issue and refuting a collections of nonsense from the support tech. Eventually a supervisor assure me that the driver was the same and that it has not change for a long time, as it is the same even for XP. Well, why bother with updates if that is the case? But I see that there are others IDE drivers species for animals such as Dell, or HP, etc. Thus you must accept that there is a strong case for a Lenovo modified Intel driver and thus the updates. Tech support could not answer such question, nor they were able to install version 8.6.0.1007 (date 2008/12/04) of the driver.
I fell the machine is working well, but have nothing to compare with (MS Experience Index 4.3). And as usually happened, sometimes you do not appreciate how sick you are, until you get cure. The question remains about the driver been generic and sufficient or specific and optimal.
Cheers and happy holidays.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

What happened to the printer driver for the HP Laserjet 1020?

After installing HP Printer Driver Update v1.1.1 for Mac OS X 10.5.3 my HP Laserjet 1020 no longer works. When I sent a print command from any software it seemed to work properly, but nothing printed. The information in printer utility window indicated that the printer was ready and there were no items in the queue.
I removed the printer and attempted to reinstall with the updated driver. However, there is no driver for the 1020 in the driver selection menu, despite the fact that it is listed as one of the drivers included in the update.
Can anyone suggest where I can obtain the appropriate driver?

greg sahli: I followed your suggestion to reset the printing system and re-install the driver update. While there is indeed a Receipt for the 1022 Series pkg, the driver does not appear in the drop down menu. The drivers closest to the 1020 that appear are 1010, 1012, 1015, and 1100. None of these drivers work.
I did find an 80% solution at Macosxhints. I will make do with this until the new OS X system comes out. If it has the 1020 or 1022 driver that works with my printer I would probably buy it. However, if it does not and the fix from Macosxhints doesn't work with Snow Leopard I'll be hard pressed to justify an upgrade until my printer dies.
Anyone interested can find it at the following url, if it is still active (there are no spaces in the url):
http://forums.macosxhints.com/showthread.php?s=eb4fe0d44e9dcd41a8da863618e391ac& t=40933&page=10

HT1338 Why doesn't "Software Update" show me the new driver for the Epson 50C20D (Artisan 800) while It is on the list of available new driver?

Since I upgraded to mountain lion, my Artisan printer stopped working. After talking to Epson and trying all kind of things, it was determined its definitely a driver problem. The PC ping the printer well but won;t print to it as it think its not connected (when it is as priven by the ping).
The new driver for Epson 50C20D are on the list of update available drivers on the OS X wen site yet trigering "Software Update" does does detect I need it... Why is that? Thanks

Thanks Mende1. The printer is there and installed allright. Even shows as "idle" until I try to print to it. The driver version shows 6.36 and I ned to update to 9 which is only avail from the App store... However, the app store don't detect I need it..

Instrument Driver for the infrared thermometer Chino IR-AH

Any one out there has experience with this instrument? It communicates through the RS-232 port.
Thank you!
Lugo

Thank you Emilie,
I doubtfully asked the vendor for the communication manual and very kindly it was sent to me (I didn’t think they would make it available because they sell a data logger program for ~$200). In any case I will try your suggestion very soon. In fact I tried after receiving the manual, but ran into some problems.
Perhaps you can help me with this one also.
The communications parameters are (see attached manual):
Speed: 9600 bps
Start bit: 1 bit
Data length: 7 bits
Parity: Even
Stop bit: 1 bit
Character code: ASCII
BCC: none
Data transmission procedure: none
The problem is with what they call “start bit”. There is not such thing in the serial port initialization. Do you know if this means that the data length is 8 bits?
I have been trying several combinations but so far the data is not coming back. Thank you again for all your suggestions.
LuGo
Attachments:
IR-AHãCommunication INE-406-0P1.pdf ‏175 KB

Cannot download the Bluetooth Driver for the IdeaPad S10

I am building a new Windows XP Pro image for our S10s and I cannot download the Bluetooth Driver from http://consumersupport.lenovo.com/lenovo/Drivers/list.aspx?CategoryID=924
I have been trying for four days, and used both Firefox and IE. It gets about halfway through, then says "The Source File Cannot Be Read"
Can they re-upload the Bluetooth Driver?
Thanks!
ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
Windows 7 Enterprise and Windows XP Pro

hey mbhockey13, maybe you can refer to my page http://forums.lenovo.com/lnv/board/message?board.id=ideaPad&thread.id=4483 to solve your bluetooth driver problem, thanks for crash74 that already solve my problem
blackpepper
with
black lenovo s10
2 gb mushkin
black razer pro click mobile

Where can I find the USB driver for the serial to USB adapter?

I have a Palm IIIc with the serial HotSync cradle and USB adapter but I dont have the driver disc for it and was wondering if there was a page within the site here I could download it from?
The OS platform needed for the driver is Win2000 / XP.
TIA,
-guitardude
Post relates to:

I did a Google search and found this link:
http://www.gilsson.com/usb_drivers_download.htm
It had the Prolific USB-to-Serial driver for WinXP. I downloaded & installed it. It created a COM5 port that my Palm Desktop found automatically. I hit the HotSync and, presto!, everything works perfectly. I only spent 5 hours trying to solve this problem for my dad.
He hadn't HotSync'd his Palm IIIxe to his home laptop since NOV2005!! And he hadn't HotSync'd to his work PC since he retired in JUL2008 (and he doesn't have access to that PC anymore).
I'll repeat this post in the other threads I queried on. I hope this helps someone solve their USB-to-Serial Adapter Driver problems.
-mark
Post relates to: Treo 650 (Sprint)

Is NI-FGEN 14.0 the latest driver for the PXI-5402?

I have just had LabVIEW 2014 installed on my PC and then I reinstalled NI-FGEN 14.0 but I believe it said there was either a patch/service pack or newer version available. Is this correct or is 14.0 the latest FGEN driver?
Solved!
Go to Solution.

Hi Dave,
As of today, this is the latest version: http://www.ni.com/download/ni-fgen-14.0/4824/en/
If you aren't sure if you have installed the patched version of 14.0 you can try to install the one above. Also you can use the NI Update Service to determine if you need to instsall the latest version or not.
Regards,
Jason L.
Product Support Engineer
National Instruments

Is there a driver for the PXI-8310 that works with Windows 7?

The only one I can seem to find is for XP.

Hello LouisTI,
Unfortunately there is not a Windows 7 driver for the PXI-Cardbus8310, as this is a legacy device which is currently going EOL (End of Life). The XP driver for the 8310 (which you may already have found) can be downloaded here:
http://joule.ni.com/nidu/cds/view/p/id/370/lang/en
If using Win 7 is critical, we recommend the PXI-ExpressCard 8360 as a replacement for the 8310:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/202294
Hope that helps!
James M. | Applications Engineer | National Instruments
James M. | Applications Engineer | National Instruments

Trouble using the instrument driver for the "hp8753b"

Similar Messages

Maybe you are looking for