Trouble using the Web-based utility

I have a WRT54G wireless router, V8, firmware 8.0.0. It is Ethernet-connected to a Windows Vista machine running SP1.
I am having trouble using the Web-based utility. I can access it but cannot make any changes.  For instance, if I change the settings on the Setup page and click "save", I get a "This webpage is not available"
I tried updating the firmware and got the same message. Disabling my personal firewall has no effect. Resetting the router from the button on its rear panel has no effect. I tried using with both Windows IE and Google Chrome browsers and got the same result.
I have been using this router without problem for months using a a Windows XP machine. This problem may be associated with my changing it to the current Windows Vista machine. I no longer have the Windows XP machine.
Please help me. Thank you and Happy New Year!
- tom 

I spent a full day unsuccessfully trying to make it work, including numerous Linksys utilities downloaded from the site. I could not conjure any support on Linksys chat, and the live body on the Linksys tech support line wanted to charge me $29 for his help.
I finally succeeded by purchasing and installing a Netgear wireless router ($44, Staples) that came up flawlessly the first time. The Linksys device is in my trash. 

Similar Messages

  • How do I access the web-based utility

    I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
    How do I access the web-based utility...help!
    Thanks.

    Access the router’s web-based setup page.
    For instructions, click here.
    Linksys Easy Answer 4030, applies to WRT300N
    Upgrading the Linksys Router's Firmware
    Hope this helps,
    Lilla
    Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

  • Web based utility won't let me use automatic dhcp setup

    Hi I use an mac osx with cable internet. i can plug in the wrt54g router correctly and the airport appears, but when I try to use the web-based utility it won't give me the option for automatic dhcp! Help me Dianne
    Message Edited by dsowings on 12-25-2007 09:18 PM

    are you talking about the options in the "internet connection type" on the router's web interface ??
    if yes, then ensure that the firewall on the computer is disabled.
    Revert with the results ...

  • 310N - web based utility password

    Trying to use web based utility.  Instructions are to use password admin and leave user name blank.  Does not allow me to enter.  Advice??

    When you configured your router, using the setup disk at that moment have you changed the router password, if yes then you need to use that password while loggin to the router setup page using web base utility.
    If you dont remember your router password, then i think you need to reset your router. Press and hold the reset switch on the back of your router for 5 seconds (Dont hold the reset switch more then 5sec, other wise it will reset your router to factory defaults), and release the reset switch, now try to login to the router setup page using the web base utility. 

  • Web-based utility bringing up blank browser page

    We are using the WRT54G router for a combination wired and wireless home network. All is working fine except when trying to access the web-based utility from the wired computer, I get a blank browser page after entering my username and password. The utility itself does not display. I have accessed it previously and know I am using the correct IP address. This seems to happen quite often. Has anyone else experienced this or have any ideas? Thank you.

    You said you entered the "user name and password".  I think on your router, the user name should be blank.
    To view the router's web pages:
    Use Internet Explorer, it usually works.
    JavaScript must be enabled.
    Use a computer that is wired to the router.
    In the non-working computer, temporarily turn off your software firewall.
    If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
    If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
    If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
    If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
    If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
    Message Edited by toomanydonuts on 09-30-2007 10:27 PM

  • Error when loading web-based utility

    i have numerous errors when i attempt to load the web-based utility in both IE and Firefox.  most of them are java errors and seem to be related to the font.  i've updated the java on my machine. i've also reset the router numerous times.  part of the page will load but most of the options are missing.  i'm at a loss to try to get the page to load correctly.  please help!
    Here are the errors that show up in firebug in Firebox....
    Unknown property 'mso-style-parent'. Declaration dropped.
    undefined
    style.css (line 50)
    Unknown property 'mso-style-parent'. Declaration dropped.
    undefined
    style.css (line 55)
    Unknown property 'mso-style-parent'. Declaration dropped.
    undefined
    style.css (line 62)
    illegal character
    ‹ '6ÐC
    share.js (line 1)
    illegal character
    ‹ $6ÐC
    help.js (line 1)
    share is not defined
    <b><a target="_blank" href="HSetup.htm"><script>Capture(share.more)</script><br>...
    192.168.1.1 (line 1202)
    hsetup is not defined
    <script>Capture(hsetup.phase38)</script><br>
    192.168.1.1 (line 1201)
    hsetup is not defined
    <script>Capture(hsetup.phase37)</script><br><br><br>
    192.168.1.1 (line 1200)
    hsetup is not defined
    document.write(hsetup.phase44);
    192.168.1.1 (line 1167)
    share is not defined
    <TD width=101 height=25>&nbsp;<script>Capture(share.timezone)</script>...
    192.168.1.1 (line 1065)
    share is not defined
    face=Arial>&nbsp;<script>Capture(share.wins)</script>:&nbsp;</FONT><...
    192.168.1.1 (line 1034)
    share is not defined
    face=Arial>&nbsp;<script>Capture(share.clileasetime)</script>:</FONT...
    192.168.1.1 (line 968)
    share is not defined
    face=Arial>&nbsp;<script>Capture(share.startipaddr)</script>:</FONT>...
    192.168.1.1 (line 946)
    share is not defined
    name=lan_proto><B><script>Capture(share.disable)</script></B></TD>
    192.168.1.1 (line 938)
    share is not defined
    type=radio checked value="Enable" name=lan_proto><B><script>Capture(...
    192.168.1.1 (line 936)
    share is not defined
    <TD width=101 height=25>&nbsp;<script>Capture(share.dhcpsrv)</script>:...
    192.168.1.1 (line 934)
    share is not defined
    face=Arial>&nbsp;<script>Capture(share.submask)</script>:</FONT></TD...
    192.168.1.1 (line 902)
    share is not defined
    document.write("<OPTION value=0 selected>"+share.auto+"</OPTION>");
    192.168.1.1 (line 837)
    share is not defined
    face=Arial>&nbsp;<script>Capture(share.mtu)</script>:</FONT></TD>
    192.168.1.1 (line 833)
    share is not defined
    face=Arial>&nbsp;<script>Capture(share.domainname)</script>:&nbsp;</...
    192.168.1.1 (line 822)
    share is not defined
    face=Arial>&nbsp;<script>Capture(share.hostname)</script>:&nbsp;</FO...
    192.168.1.1 (line 811)
    share is not defined
    face=Arial>&nbsp;<script>Capture(share.routename)</script>:&nbsp;</F...
    192.168.1.1 (line 800)
    share is not defined
    document.write("<OPTION value=1 >"+share.staticip+"</OPTION>")
    192.168.1.1 (line 613)
    share is not defined
    href="DDNS.htm"><script>Capture(share.ddns)</script></A>...
    192.168.1.1 (line 543)
    bmenu is not defined
    href="StaRouter.htm"><script>Capture(bmenu.statu)</script></A>...
    192.168.1.1 (line 531)
    bmenu is not defined
    href="Manage.htm"><script>Capture(bmenu.admin)</script></A>&nb...
    192.168.1.1 (line 527)
    bmenu is not defined
    <script>Capture(bmenu.gaming)</script></A>&nbsp;&nbsp;&nbsp;&n...
    192.168.1.1 (line 523)
    bmenu is not defined
    href="Forward.htm"><script>Capture(bmenu.applications)</script...
    192.168.1.1 (line 522)
    bmenu is not defined
    href="Filters.htm"><script>Capture(bmenu.accrestriction)</scri...
    192.168.1.1 (line 518)
    bmenu is not defined
    href="Firewall.htm"><script>Capture(bmenu.security)</script></...
    192.168.1.1 (line 514)
    bmenu is not defined

    These are JavaScript errors and no Java errors. Java has nothing to do with them. Updating Java won't make any difference.
    Do you run any software firewall on the computer? As the problems occurs on IE and Firefox it could well be that your firewall damages the JavaScript in the web pages. Firewalls like to do that to protect your "privacy".

  • Modifying the web-based capture utility

    Hello - we are looking to modify the web-based capture tool to only allow for video file uploads, and not capturing etc. Anyone have experience with this?
    Thanks in advance!

    not yet - but i would be interested in details..

  • Is there a way to access the web-based setup for my router if I cannot access the internet?

    Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

    On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
    Once you have reached the web configuration utility you can change the DHCP settings.
    To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

  • E1000 won't connect to Cisco Connect or the Web based set up

    My router is working fine but I cannot connect to Cisco Connect or the web based advanced features now. I know I broke the cardinal rule by using advanced set up so that explains why Cisco connect won't work. But I can't figure out why I can't connect to the advanced web based utility now. Who made the decision to put some features in cisco connect but not include those features in advanced settings? And then if you use advanced settings cisco connect no longer works. This is such a turn off I'm actually thinking about returning the thing to Best Buy. That's like saying "if you open the hood of your car and touch anything parts of your car will no longer function". I call support and they repeat what they read on paper "reset the router and start over and don't use advanced settings". What a pain in the &^%$.

    I've reinstalled the router again and just switched the ssid and password where it was before so all the devices in our home can connect. I first shut down the guest account using Cisco Connect (which is the only place you can control the guest account) and now I just use the advanced settings. So of course Cisco connect no longer works. I've got a strong signal all over our home. No disconnection issues at all. But this software design that puts some features in one part and other features in advanced and then shuts down cisco connect if you use advanced is insane. If I knew cisco was planning a firmware upgrade to give the advanced mode everything cisco connect has and more then I'd keep this thing. For the life of me I cannot understand why any software engineer would come up with such a design as this. And quite honestly I tried to play by their goofy rules of not using advanced settings and cisco connect died after about 4 uses. Never would connect again. Just said call support (in India) and after telling your life's story to someone simply being told to hit the reset button, power off and start the process all over again. If anyone at Cisco reads this stuff I think I have a legitimate complaint. Why on earth would you put features in Cisco Connect that aren't in advanced and why would you stop running Cisco connect just because I hard coded some mac addresses in advanced mode? I would love to know the logic behine such a crazy implementation of software.

  • Registering the Web based application as a Partner Application

    Good day
    I went through the suggested documentation of registering a
    web based application as a partner application of the SSO Login Server.
    I installed the SSOSDK.JAR and went through the demo application (JSP Demo)
    which consists of the following programs :
    papp.jsp
    ssoinclude.jsp
    ssoEnablerJspBean
    SSOEnablerBean
    SSOSignon
    As per the technical documentation,I register this demo application as a
    partner application.
    1 - The source code of the papp.jsp checks for the existence of the user
    through method of ssoEnablerJspBean [getSSOUserInfo(request, response)] which
    calls method of SSOEnablerBean [getSSOUserInfo (request, response) and this
    method calls getUserInfo(p_request) of SSOEnablerBean (the same program) to
    check the existence of the application cookie.
    2 - If it doesn't exit , it redirect it to the SSO Login page for user
    authentication.Once the user is authenticated, a SSO login cookie is created on
    the client's browser and redirects back to the SSOSignOn.
    3 - The SSOSignOn program creates the application cookie and redirects back to
    the entry point of the demo application which is papp.jsp.
    My Questions are as follows :
    1 - Instead of creating a session object within my web based application to hold some
    information used between the different pages, can I define them in the
    application cookie? kindly advise? Is there any limitation for the length of
    the application cookie? If yes, what will be the risk?
    2 - The SSOSignOn program is calling a method in the SSOEnablerBean
    [setPartnerAppCookie(response, request). Within this method , it is retrieving
    the parameters values of the request object as :
    request.getParameterValues("urlc")[0];
    What is the role of this [urlc]? Is it hard coded? Can I change it?
    3 - In order to ensure that I am still dealing with the same user, shall I put
    the above security check procedure on each page of my weeb based application? Kindly advise?
    Thanks in advance for your prompt feedback
    regards

    Dear Paul
    I think there is a misunderstanding regarding the last correspondence.
    I am talking about the customized home page of the PORTAL and not the home page of my web based application (JSP) .So in this case, Am I able to use the customized home page which contains a login portlet instead of the default Login page of the SSO Login Server.Kindly advise!!!
    On the other hand, I am facing a problem during the surfing of the web based application.
    The web based application consists mainly of two packages :
    Package I : Bank.counter which contains a set of jsp pages.
    JSP_HOME_COUNTER (MAIN PAGE WHICH CONTAINS 2 FRAMES)
    JSP_LEFT_FRAME_COUNTER
    JSP_MAIN_FRAME_COUNTER
    JSP_MAIN_FRAME_COUNTER_DETAIL
    Package II : Bank.portfolio which contains a set of jsp pages.
    JSP_HOME_PORTFOLIO (MAIN PAGE WHICH CONTAINS 2 FRAMES)
    JSP_LEFT_FRAME_PORTFOLIO
    JSP_MAIN_FRAME_PORTFOLIO
    Please note that the SSO classes are residing under the first package.
    As agreed on in the third question, I am including in each page of my web based application, a security check procedure as follows :
    <%@ include file="ssoinclude.jsp" %>
    <%
    if(usrInfo == null)
    response.getWriter().println("<center>User information not found</center>");
    else
    my jsp code.......
    %>
    Please note that all the jsp page of the portfolio package are pointing to the SSO classes as follows :
    <%@ include file="../counter/ssoinclude.jsp" %>
    <%
    if(usrInfo == null)
    response.getWriter().println("<center>User information not found</center>");
    else
    my jsp code.......
    %>
    Once I invoke the JSP_HOME_COUNTER , it will render the JSP_LEFT_FRAME_COUNTER page and
    JSP_MAIN_FRAME_COUNTER page which invokes the SSO Login page. Once the user has been authenticate, the result of the JSP_MAIN_FRAME_COUNTER is rendered successfully. The result contains an hyperlink to the
    JSP_MAIN_FRAME_COUNTER_DETAIL page. As the user has been authenticated , this page is rendering automatically the result without displaying the SSO Login page. (Perfect as of now!!).
    Once I invoke the JSP_HOME_PORTFOLIO from the JSP_HOME_COUNTER, it runs the security procedure without any rendering of the SSO Login page (fine!!) but redirects me back to JSP_HOME_COUNTER instead of rendering the result of the JSP_HOME_PORTFOLIO.
    please note that the m_requestUrl variable in the SSOEnablerJSPBean class has been assigned the folowing value : JSP_HOME_COUNTER
    Kindly advise .

  • I get this message when trying to past simple text into an e-mail document. The Web-Based Email plugin has crashed. I have run out of options...please help.

    The Web-Based Email plugin has crashed. I get this message when trying to paste simple text into an email document. I have updated plugins and have run out of options. If I use another browser I have no problem. Please advise.

    UPDATE
    Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
    Thanks.
    Fede.

  • How to create the web based report without enterprise portal?

    Hi experts,
    We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
    Can I use report designer for this?
    Thanks in advance.
    Sharat.

    Hi Sharat
    In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
    1. Enterprise portal
    2.Web Application Designer(WAD)
    So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
    Reagrds
    Satish

  • Need help for the web based project

    I am using netbeans 5.5 and Sql server for db.What is the full form for DAO and how is it going to help me in my project.U also talk about uml want ot know about it.
    and how is it coming to help me.Its a very wast topic i serached.what will be helpful to me of the UML.
    What should i start first --- jsp or db design.
    What should i use for web based project --- only use jsp(presentation)+dao or jsp+servlet+dao.What would be best ?
    provide some nice link based on dynamic fetching of values from the database and showing it at runtime.
    Message was edited by:
    java@mani

    As stated in http://forum.java.sun.com/thread.jspa?threadID=5167752 start reading the Java EE tutorial to get insights in the material.
    what will be helpful to me of the UML.UML generally visualizes the core functionality. See http://www.google.com/search?q=uml+tutorial for some tuts.
    What should i start first --- jsp or db design.Start with both and end with the best balance between both.
    What should i use for web based project --- only use
    jsp(presentation)+dao or jsp+servlet+dao.Depends on the business needs. Generally 3-tier webapplications are the best: web, business and data.
    provide some nice link based on dynamic fetching of values from the
    database and showing it at runtime.Check some SQL and JDBC tutorials how to fetch and process the data:
    http://www.google.com/search?q=sql+tutorial
    http://www.google.com/search?q=jdbc+tutorial
    How to process it in the business and web layer is stated in the Java EE tutorial I've linked in your former topic.
    For applying the patterns, check the http://java.sun.com/blueprints/corej2eepatterns/

  • Problem Starting the Web-Based Administrative Console

    I have Installed Application Server 7 Platform Edition. Everything runs smooth. The Application Server and the Administrative Server got started perfectly. I checked both of these Servers and they are working perfectly.
    The problem is that when trying to connect to the Web-Based Administrative Console.
    I get the prompt to enter the Admin username and the password, once I have entered, it accepts but through the following message.
    �Your Sun One Application Server License does not allow Remote Administration.
    Please go to http://www.sun.com/upgradeas7 to upgrade your license.�
    How can this happen because I am using the same machine where Application/Administrative Servers are running to get connected to Web-Based Administrative Console.

    Hi,
      May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
    From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
    Aditya.

  • Cannot send email from Verizon to a specific domain using the web UI

    I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
    In Chrome, I can see that a "code":1002 error is being produced.
    Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?

    rhodeislandred wrote:
    I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
    In Chrome, I can see that a "code":1002 error is being produced.
    Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?
    What is the domain that is giving you the error?

Maybe you are looking for