Trouble using wifi exclusively.
Hello there,
I am totally new to the forums here, but I got my first blackberry ages ago, since then I have worked my way through an 8330, a curve, and eventually a bold 9900. I loved them all, but I had a couple of issued, with the bold that had me stray over to a Galaxy S4. Now with the Q20 on the horizon and the large availability of apps not available on its predicessor (namely skype), I really want to come back over.
The problem I was running into on my 9900 is that I work offshore and we don't have network coverage as soon as we get on the helicopters. When I started doing this my 9900 seemed to operate just fine on wifi alone except that I had no text or voice. But then about a year and a half ago it just stopped connected to anything requiring a blackberry enterprise services, namely yahoo messenge and BBM. I am not sure if this is a problem with the phone or just the way that blackberry works now. I would hate to buy a new Q20 and then find out I can't use it offshore because it operates the same. So I am really hoping that someone can shed some light on this and that I just had a bit of bad luck with my 9900, not working the way it should.
Any insight you guys could offer would be greatly appreciates, keeping in mind that I am overseas as we speak and have no access to that handsett for about 2 weeks, but I am happy to take any advice under advisement.
Cheers!
BB10 does not require any kind of specific BlackBerry data plan so it will do everything on wifi with exception of phone and sms.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Similar Messages
-
[SOLVED] Trouble using WiFi
I haven't had problems with this before, but then again, I don't use WiFi a whole lot.
ArchLinux simply cannot use WiFi, even if it's connected. I'm not sure why that is. I am connected using the GNOME interface and what I assume is NetwokManager, although I'm not sure. I have done a lot of Googling but I can't seem to find any solutions, mainly because I don't know what is causing the problem.
Any ideas on what to do? How to diagnose the problem? How to fix it?
Last edited by Binero (2014-04-06 17:36:34)I know I needed to give some information, but my question also was how to diagnose the problem. I had no idea what to do still. Also for some reason GNOME seems to have stopped detecting WiFi networks as well. Not sure why that is, I've not changed any settings.
lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06)
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 06)
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06)
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06)
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06)
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 06)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 06)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] [1002:68c1]
02:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60]
08:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
14:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. 1394 OHCI Compliant Host Controller [1217:10f7] (rev 01)
14:00.1 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:8120] (rev 01)
14:00.2 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/MSPRO/xD Controller [1217:8130] (rev 01)
20:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp32s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:26:b9:ed:6e:7e brd ff:ff:ff:ff:ff:ff
3: wlp8s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether c4:46:19:a3:5c:76 brd ff:ff:ff:ff:ff:ff
iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
Band 1:
Capabilities: 0x70
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (19.0 dBm)
* 2417 MHz [2] (19.0 dBm)
* 2422 MHz [3] (19.0 dBm)
* 2427 MHz [4] (19.0 dBm)
* 2432 MHz [5] (19.0 dBm)
* 2437 MHz [6] (19.0 dBm)
* 2442 MHz [7] (19.0 dBm)
* 2447 MHz [8] (19.0 dBm)
* 2452 MHz [9] (19.0 dBm)
* 2457 MHz [10] (19.0 dBm)
* 2462 MHz [11] (19.0 dBm)
* 2467 MHz [12] (19.0 dBm) (no IR)
* 2472 MHz [13] (19.0 dBm) (no IR)
* 2484 MHz [14] (disabled)
Band 2:
Capabilities: 0x70
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180 MHz [36] (21.0 dBm)
* 5200 MHz [40] (21.0 dBm) (no IR)
* 5220 MHz [44] (21.0 dBm)
* 5240 MHz [48] (21.0 dBm) (no IR)
* 5260 MHz [52] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5280 MHz [56] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5300 MHz [60] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5320 MHz [64] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5500 MHz [100] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5520 MHz [104] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5540 MHz [108] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5560 MHz [112] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5580 MHz [116] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5600 MHz [120] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5620 MHz [124] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5640 MHz [128] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5660 MHz [132] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5680 MHz [136] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5700 MHz [140] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5745 MHz [149] (21.0 dBm) (no IR)
* 5765 MHz [153] (21.0 dBm) (no IR)
* 5785 MHz [157] (21.0 dBm) (no IR)
* 5805 MHz [161] (21.0 dBm) (no IR)
* 5825 MHz [165] (21.0 dBm) (no IR)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* AP/VLAN
* monitor
interface combinations are not supported
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
systemctl --no-pager
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:01.0-0000:02:00.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/backlight/acpi_video0
sys-devices-pci0000:00-0000:00:01.0-0000:02:00.0-drm-card0-card0\x2dLVDS\x2d1-radeon_bl0.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/drm/card0/card0-LVDS-1/ra
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 5 Series/3400 Series Chipset High Definition Audio
sys-devices-pci0000:00-0000:00:1c.1-0000:08:00.0-bcma0:0-ieee80211-phy0-rfkill0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:08:00.0/bcma0:0/ieee80211/phy0/rf
sys-devices-pci0000:00-0000:00:1c.1-0000:08:00.0-bcma0:0-net-wlp8s0.device loaded active plugged Wireless 1520 Half-size Mini PCIe Card
sys-devices-pci0000:00-0000:00:1c.5-0000:20:00.0-net-enp32s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged TOSHIBA_MK5056GSY DellUtility
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged TOSHIBA_MK5056GSY RECOVERY
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged TOSHIBA_MK5056GSY OS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda4.device loaded active plugged TOSHIBA_MK5056GSY 4
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device loaded active plugged TOSHIBA_MK5056GSY 5
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda6.device loaded active plugged TOSHIBA_MK5056GSY 6
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged TOSHIBA_MK5056GSY
sys-devices-pci0000:00-0000:00:1f.2-ata5-host4-target4:0:0-4:0:0:0-block-sr0.device loaded active plugged Optiarc_DVD+_-RW_AD-7640S
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-net-devices-enp32s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
sys-subsystem-net-devices-wlp8s0.device loaded active plugged Wireless 1520 Half-size Mini PCIe Card
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
proc-sys-fs-binfmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-2.scope loaded active abandoned Session 2 of user jeroen
session-5.scope loaded active running Session 5 of user jeroen
accounts-daemon.service loaded active running Accounts Service
colord.service loaded active running Manage, Install and Generate Color Profiles
dbus.service loaded active running D-Bus System Message Bus
gdm.service loaded active running GNOME Display Manager
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
netctl@wlp8s0\x2dJesus.service loaded failed failed Automatically generated profile by wifi-menu
NetworkManager.service loaded active running Network Manager
polkit.service loaded active running Authorization Manager
rtkit-daemon.service loaded active running RealtimeKit Scheduling Policy Service
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
systemd-backlight@backlight:radeon_bl0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:radeon_bl0
systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
systemd-hostnamed.service loaded active running Hostname Service
systemd-journald.service loaded active running Journal Service
systemd-localed.service loaded active running Locale Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-netctl.slice loaded active active system-netctl.slice
system-systemd\x2dbacklight.slice loaded active active system-systemd\x2dbacklight.slice
system-systemd\x2drfkill.slice loaded active active system-systemd\x2drfkill.slice
system.slice loaded active active System Slice
user-1000.slice loaded active active user-1000.slice
user.slice loaded active active User and Session Slice
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda5.swap loaded active active /dev/sda5
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
remote-fs.target loaded active active Remote File Systems
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
102 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
uname -a
Linux localhost 3.13.8-1-ARCH #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014 x86_64 GNU/Linux -
im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help? I ve uninstalled/ reinstalled switched it on and off what next?
Did you try downloading the movie from iTunes on your iPad? I know it takes longer but I'd try that.
Also try to reset all settings.
Settings > General > Reset. Reset all settings. -
TS1398 After upgrade to iOS 6 i am not able to use wifi.
Connected, but no wifi traffic (at home).
After upgrade to iOS 6 i am not able to use wifi. I am connected to my home wifi but no trafic is coming through (safari, skype, twitter, app store). I have even tried recovery of my iPhone 4S using iTunes as well as using iPhone. But without effect.
Can not connect at all (at work).
Thank you for helpfull advice.
Vladimir
Please do not give me advice like:
switch proxy to auto
turn the flight mode on and off
turn the iphone on and off
release the ip
recovery the network settings
recovery firmware
I have tried all these, but did not work.
PS to apple:
I really did not expect this kind of trouble. If I would want to waste my time "repairing my device", I would buy an android phone!!!!!!This helped me solve the problem:
I have changed the security from TKIP to AES and now my wifi works fine /sofar/.
Targat -
I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router. My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada. Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems. Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web.
I believe that things may be happening in the background from various Apps that use quite a lot of Data. It could be that iCloud is part of the issue with things being backed up automatically. It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc. I typically turn off the App Store "Updates" such that they don't automatically load. The FaceBook works now posted videos play when you are just scrolling through the News Feed.
I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on.
Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?Thanks for your comments, it is clear you understand my plight. The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night). Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part. Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out. All App Updates if set to Automatic also can add up to quite a bit of Data. Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data. There could be other culprits that I am not even thinking of. I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely. Again thanks for your quick response.
-
I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.
csdwarf,
So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
BrianP_VZW
Follow Us on Twitter @VZWSupport -
Trouble using AirPlay between iMac and AppleTV
I'm running OS X Lion 10.7.5 and I'm having trouble using AirPlay between iMac and AppleTV (2nd Gen). It used to work fine, but for some reason it just stopped responding. I can see my media on my iMac from AppleTV and I can see AppleTV from my iMac when attempting to use AirPlay. However, when I try to pull or push media from my iMac to AppleTV it just stalls and never loads. AirPlay works fine from my iPhone and iPad with AppleTV - it's limited to my iMac only.
I'm using a Netgear R7000 wireless router and a Netgear AC120 WiFi Extender and as such, I have 4 available wireless networks (2 from the router and 2 from the extender / 2 - 2.4 GHz and 2 - 5 GHz). My internet access is great and my network performance is good across the board. All of my software/firmware is up to date (iMac, AppleTV and router/extenders). I've tried all combinations (mixing/matching) all of my wireless networks between devices (iMac/AppleTV) - nothing makes a difference (again, AirPlay works fine between my mobile devises/AppleTV). Netgear Genie has been making changes to my network settings as new firmware has been installed in both the router and extender. I'm guessing there is something screwy going on with the network settings on the iMac, but I can't figure it out.
Anyone have any suggestions?
Thanks!I'm glad you got it all working. Out of interest, how do you (or your son) connect to the internet now? Is it just a dial-up connection? If it is, I am sure you know that, even if you get the Apple TV to share the connection, the speed will seriously limit the use of many of the Apple TV's features.
The Airport Extreme is a great router but you will need a DSL or cable modem as well as it won't connect to the internet without one. There are many great (and cheaper!) combined modem/routers available if your son wants to get a high-speed network up and running at lower cost. Any other computers, phones, games consoles etc that you may have in the house can then all connect easily.
I hope that I have helped a little and I will look out for future posts in case I can help again. -
Trouble using facetime on another device with same apple id
Hi
I am having trouble using facetime with my wife. I have an iPad 2 and she has an IPhone 4S. When we try to facetime, we are able to connect for a few seconds and then it drops off. We are then unable to reconnect. We both have the same apple Id and e-mail address although I am trying to contact her via her mobile number. Any suggestions would be grateful received.Get an email address (free gmail.com) to use on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC. I hate to spend another $179 if this is just something I'm doing wrong. Please help
I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11. -
More info needed about using wifi in high reflective enviroment
I am looking for documents about using wifi in highly reflective enviroments: rooms with aluminium floor, walls and ceiling en very little materials that absorb rf. (cleanroom enviroment)
Any hints are appreciated.Thanks for your reply Mat,
The cleanroom enviroment (ASML semiconductor industry) is a large room about 30 * 60 meter and 7m high. In this room are smaller cabinets (about 20) where the actual work is done. Here you can see some pictures:
http://www.brecon.nl/images/brecon_brochure.pdf
In full production there are about 120 engineers working with their 802.11b/g equipped laptops.
Every wall, floor, ceiling, door is made with aluminium sandwich panels. We have major troubles getting a reliable wifi enviroment, and also DECT and GSM telefony is hardly working at all.
Right now we have 10 AP's is the large room, and we are contemplating installing 1 AP in every cabinet with low power setting and using attenuators. We are also considering the use of leaky coaxial cable.
Migrating to 802.11N is not really an option since the clients are b/g equipped.
I will upload a plan soon. -
Trouble with wifi after IOS 6 upgrade
I have an iPhone 4 and successfully installed iOS 6 today. I am having trouble getting on my home wifi. When asked to join my network, I click on it and type in my password. Shortly after typing in my correct password an apple.com login page loads from the bottom of the iPhone but says "hmm, the page you're looking for cant be found". The only option I have is to push cancel and then it ends my wifi connection with my own home network. Help please.
burhansheikh replied to Trouble with wifi after IOS 6 upgrade
"guys i have 100% solution copy Wi-FI address from about(general)(setting) & paste to Client ID in your network (Wi-FI) (setting)"
in Using iPhone • 8 replies
1 -
I've tried the listed troubleshooting procedures to activate Facetime and iMessage, but no luck. Are there any other options? If it helps, I'm currently overseas and only using WiFi to connect.
lovethoseleaves,
Oh no! I am saddened to hear that you are having troubles with your MMS pictures. I know that this can be an important thing to be able to do. I appreciate you working with us to get this matter resolved as well. I see that you have spent time working with us, and I know that can also be frustrating. There are a few things we can check though. Are these to any specific numbers or all? A factory reset certainly should've resolved this. We can check into the account set up as well for that if need be. Please share any additional details that you can think of. Thanks.
ErinW_VZWSupport
Follow us on Twitter @VZWSupport -
I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?
Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here
-
I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
TheOneYou need a DATA service enabled by your carrier to be able to send e-mail via thier network. Do you have a data plan with your carrier ? If so - is it enabled ?
Can you access internet thru your network (not wifi) ? -
How can I transfer an App purchased on iTunes on my pc to my iPhone 4s. I have tried synching but this does not make the app appear on my iPhone. I cant use wifi as my chip was fried on the latest update.
When you tried syncing, did you connect the phone, then click on the phone icon near the top left of iTunes, then click on Apps under Settings in the sidebar, then find the app in question and click the Install button beside it before clicking Sync at the bottom right?
Maybe you are looking for
-
Can anyone explain the way to access parents?
I just don't get it! I have var parent_mc:AdventCalendar=AdventCalendar(this.parent.parent) in a class file for a symbol who's parent's parent is AdventCalandar, so why on earth is it saying TypeError: Error #1009: Cannot access a property or method
-
SRW.SET_AFTER_page_HTML
Hi, SRW.SET_AFTER_page_HTML(SRW.TEXT_ESCAPE,'<CENTER>'||'Center after page' ||'</CENTER>'); The effect of using this built-in or setting after page value (html output Reports ias904)is this <CENTER>Center after page</CENTER> <table border=0 cellspaci
-
in setting up new apple tv, message says "apple tv cannot sign in to Itunes until network time has been set - please try again later.........is this an easy fix?
-
I want to instal the beta version of Yosemite on a partition, but when I open Disk Utility to do so, it won't allow me. After pressing the plus sign at the bottom of the screen I can not enter a value for the size. When I look down at the very bottom
-
Why do some calendar events have a colored dot and some a colored backgriound in OSX? Is there a way to fix this? Also I change the colors to what I want and they change back to I guess the default.