Trouble using with FM transmiter

I've been using an FM transmitter with my ipod since i bought it close to 2 years ago and it has randomly stopped working, the transmiter seems to still be picking up the signal there is just no audio coming out.
I've purched a new transmitter and used my sisters ipod with the old one and both test worked so I beilive its a problem with my ipod any ideas as to what this is and how to fix it. and please dont tell me i have to by a new one

If my guessing is right, you are connecting your iPod with the FM transmitter via its earphone jack, right.
If it is the case, then it may causes by the poor contact between the plug of the FM transmitter with the earphone jack

Similar Messages

  • McAfee SiteAdvisor is no longer working with my Safari 8.0.  I never had trouble using it with Safari before this latest version.  Has anyone else had this problem?

    McAfee SiteAdvisor is no longer working with my Safari 8.0.  I never had trouble using it with Safari before this latest version.  Has anyone else had this problem?  I contacted McAfee support and they said nobody else is reporting this issue.

    Wow, life is certainly tough for you.
    S***t happens.  That's why there's a warranty.

  • I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

    I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

    Check this out....
    http://support.apple.com/kb/HT1664

  • Trouble using facetime on another device with same apple id

    Hi
    I am having trouble using facetime with my wife.  I have an iPad 2 and she has an IPhone 4S.  When we try to facetime, we are able to connect for a few seconds and then it drops off.  We are then unable to reconnect.  We both have the same apple Id and e-mail address although I am trying to contact her via her mobile number.  Any suggestions would be grateful received.

    Get an email address (free gmail.com) to use on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Trouble using Safari on start-up with pop-up error

    Hi,
    I'm having trouble using Safari. Every time I open up the application, a small screen popped up saying "Error- Failed to load the FastBrowserSearchPlugin plugin.* -[BrowserWindowController currentWebView]: unrecognized selector sent to instance 0x7aa570". What can I do to get rid of this issue. I am assuming it has something to do with the Fast Browser Search engine located on the top right of the safari app. Help me please! Any help will be appreciated. Thank you.

    HI and welcome to Apple Discussions...
    You need to uninstall that plugin.
    Go here for instructions on how to remove it.
    http://help.fastbrowsersearch.com/
    I think you'll find it in: ~/Library/Internet Plugin-ins
    ~ (Tilde) represents your Home folder.
    Carolyn

  • Trouble using external iSight with MacBook Pro (which has built in camera)

    Hey Jim,
    Have a question for you. I have a new MacBook Pro 17". I also have a 23" Cinema Display, and a left over Firewire external iSight camera (which I used to love).
    Frequently I "dock" my MBP with my 23". I either use the dual-screen between the two, or I close the lid on the MBP, let it go to sleep, then wake it back up with a BT keyboard or mouse, letting it go to a single-screen mode on only the 23" Cinema Display.
    So, I'm trying to use my external Firewire iSight with my MBP, and I'm getting mixed results -- the best of which is where I am getting some video with regular, occasional freezes with the picture being split (like a v-hold problem on an old TV). After a pause it goes back to smooth video.
    I guess primarily, I'm wanting to know what the world of two iSights (FW and built-in) look like, and can they work together? I cannot for the life of me get this FW iSight to work consistently, but I know it works perfectly in another G5 tower (which has no built-in camera).
    Any suggestions or guidance?

    Hello Exivus
    ... two iSights (FW and built-in) ... can they work together?
    You can have two iSights connected at one time, but, as explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by only one application at a time. (my emphasis)
    Different apps select between multiple connected cameras in different ways. For instance, iChat > Preferences... > Video settings can select which camera to use with the iChat app, but iMovie 6 uses a drop-down menu as shown in this picture:
    The suggestions in How to Troubleshoot iSight should help you determine whether one of your iSights is causing trouble. I suggest you test each one separately and without your external display or other peripherals to rule out possible conflicts.
    After you are certain that your iSights are working individually, test them when both are connected. After your system successfully passes these tests, you can add your external devices back one-by-one to be sure one of them is not causing the problem.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • Hello. I am having trouble using Mobileme with microsoft oulook 2010. .The error Mobileme has stopped working . Can anybody help. ??Thanks

    Hello
    I am having trouble using Microsoft Outlook 2010. When starting Microsoft Outlook displays the error message Mobileme has stopped working. Can anybody help.
    Thanks

    Well yes, of course you are having trouble using MobileMe because MobileMe no longer exists and has not existed for the last 2 years at least.
    MobileMe has been replaced by iCloud, so you will never be able to use MobileMe because it does not exist.
    Also, I would suggest that you look more closely before you post, because you have posted this in an iPhone forum and this question has nothing to do with iPhones.  You would get more help if you posted in the correct forum.

  • I am having trouble using my I phone with Icloud. I tried diabling it & all my contacts have been cancelled.

    I am having trouble using my I phone with Icloud. I tried diabling it & all my contacts have been cancelled.

    OK, I called Plantronics and it was an easy fix.  You need to hold down the volume up button and the power button on (on the headset) at the same time until the lights on the headset start flashing red and blue.  Then turn on the phone Bluetooth and it pairs up just fine.
    Thanks fo rthe help!!

  • Hi, I am having trouble using the smooth tool on a logo that I created. I have watched tutorials and something isn't working for me. When trace with the smooth the line just disappears and doesn't smooth anything out. Please help.

    Hi, I am having trouble using the smooth tool on a logo that I created. I have watched tutorials and something isn't working for me. When trace with the smooth the line just disappears and doesn't smooth anything out. Please help.

    Sorry, that's Monika with a k
    On Tue, Nov 18, 2014 at 2:26 PM, Monika Gause <[email protected]>

  • I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

    I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8  Can't seem to download the upgraded software.  Can anyone help?

    Please review the System Requirements for the Time Capsule.
    http://www.apple.com/airport-time-capsule/specs/
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

  • Trouble using JMXMP Security with TLS example

    I am using the example code from section 11.4.3 TLS Socket Factory in the document: [Java Dynamic Management Kit 5.1 Tutorial|http://docs.oracle.com/cd/E19698-01/816-7609/6mdjrf873/index.html] . I can get it working fine, but only if the first private key entry in the server side's keystore is the one that matches a certificate in the client's truststore. This leads me to believe that there is no way to select a particular private key for use with a JMXMP connection across TLS, i.e. TLS always chooses the first key entry it encounters in the keystore. Is this true?

    look at the oasis interop examples scenario 1:
    http://webservice.bea.com:7001/

  • Having trouble using my new touch with my tv. Have the lightening adapter, but only get sound, no video via the cable I used with my touch (4)

    How do I use my new touch (5) on my tv. My touch (4) used a cable attached to my tv, so I got a lightening adapter, added to end of cable, and plugged in new touch. Sound came through on tv, but no video. Do I need a new cable that supports this video content??

    Hello krnsrts2013,
    For more information on which Digital AV adapters are compatible with which iOS devices, you may find the information outlined in the following article helpful, in particular this portion:
    Apple AV adapters cannot provide video output when used with Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m) adapter.
    About Apple Digital AV Adapters for iPhone, iPad, and iPod touch - Apple Support
    Per the article, for an iPod Touch 5th Gen, you would need either a Lightning Digital AV Adapter or a Lightning to VGA Adapter, depending on your connection type. 
    Sincerely,
    - Brenden

  • Trouble using WRE54G with WAG54G

    Hi,
    I've just purchased a WRE54G extender to use with my WAG54G, but I can't get
    it to work. Do I need a firmware upgrade for my WAG54G?
    Current WAG54G firmware is 1.00.19, Nov 30 2004.

    hi , can you specify the exact version of the WRE ....the config of version 1 are very much different from versions 2&3.....will require the exact version if i am to give you proper guidelines
    this could not be a WAG issue at all...we will have to check and see .

  • HEEEEEELP - trouble using Apple ID

    Some time ago i changed my e-mail adress and therefore i had to change my Apple ID to the new e-mail. So far so good.
    I now have trouble using my Apple ID on my iPhone. It automatically logs on the old Apple ID, but there is no code for that Apple ID anymore. When i use the password i used with my old Apple ID, it will not accept (i have not changed it - only the "username")
    When i go into my Apple ID account, the old e-mail adress is deleted (only the new e-mail adress is in my account), so how can it be, that the old Apple ID is the one my phone wants to use?
    I have tried changing my password on the old account, by pressing "fotgot password", but the mail to reset my Apple ID is sent to my new e-mail and therefore it is the password to my new Apple ID i'm changing.
    I hoped it only was a problem because the old phone had already been logged in with the old Apple ID, but i have just recieved my new iPhone 5s and now i can't get all my previous purchases and stuff to the new phone, because it also wants to use the old Apple ID, and i still have no password.
    It is also causing my iCloud to not work proberly.
    What to do? Hope someone can help me.

    I just skipped the part of the setup with my old e-mail, and did the setups manually when my new phone was done setting up. Now I can use my Apple ID and iTunes and iCould account for the first time in months.
    Thank you for your help!

  • Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated

    I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
    InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
    [server] Writing IOR to ... and it should generate the IOR file
    but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
    Thanks in advance.

    [From Susan Doan, who is having trouble posting to the forum today}:
    It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
    You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
    Thanks,
    Ole

Maybe you are looking for

  • EDI Interface

    Hi,         I've got two questions. Requesting answers. 1. By studying the scenario of an interface, how do we come to know whether to      use ALE or EDI interface? 2. What is the process for configuring the EDI outbound interface when it is File-  

  • Exchange server 2007 SP3

    Dear all, Presently we are using exchange server 2007 Sp3 along with windows 2008 x64 Domain controller it's working fine . But we have some issue related with Message Size restriction when I changed maximum msg size sent and receive  this option wil

  • How do I get Dreamweaver to display the webpage that I have coded?

    I am brand new to the world of Dreamweaver, so have patience if this is a dumb question. It seems that Dreamweaver is a rather plain vanilla text editor, and there is no way to actually display the HTM and PHP code I have written. Is there a plug in

  • Running explain plan on a prepared statement

    I'm using IBatis to run queries against an Oracle database. IBatis runs the queries as prepared statements. I want to run explain plan on the prepared statements. I already have a shim -- a proxy java.sql.Connection object -- that takes the SQL used

  • Fully Migrate to Aperture from iPhoto

    I am ready. Whats the best means of doing the final transfer? I currently just have aperture running my iPhoto library.