Trouble when loading quicktime files

Hi.
I have just bought Keynote so I can run a presentation with a lot of really heavy stuff. 22 GB in all.
The document came from a filmmaker and opens up fine, but it states in Danish " Kan ikke indlæse ekstern film - En nødvendig datahenvisning kunne ikke behandles. (Lysbilleder: 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16)
Which means something like " Can not open external movie - a necessary data link could be loaded"
I have tried to move the files to a different location on my Macbook Pro - and also my Mac Pro - but I get the same error report.
I have Snow Leopard 10.6.8.
Maybe someone out there could help me out here?
Thanks a lot!
Simon

Check the movie objects on the slides listed in the Error Message - see if any refer to URLs or video files not on your Mac. You might be able to get a clue as to where/what these files are by selecting them and looking at the File Info: in the Metrics Inspector.
It is possible that whoever sent you the Keynote Presentation that they forgot to select the "Copy audio and movies into document" option in the Save window. If that is the case, have your friend re-save with the option selected - that embeds the needed files. This option may not have been visible in the Save window if the Advanced Options disclosure triangle was not clicked to reveal it.

Similar Messages

Photoshop crashes when loading a file or image

Using Photoshop cs3 on a PC with Windows 7 installed.
Major Problem: Photoshop gives no response when opening an image of any sort or psd file which ends out with the options to either close the program or close and find a solution online which gives no solution whatsoever.
PScs3 was working just fine when installed but after installing an NVIDIA plug-in did it start bearing some problems. When loading png files, a window normally appears telling me that Photoshop could not parse the file. After seeing this I went to uninstall the plug-in. The problem seemed to went away but shortly after was Photoshop crashing at random, and I do mean random. Starting Photoshop at first seems to nullify the chances of crashing but after either a short period of time or a long period of time will it crash when trying to open a file. Opening multiple files at once doesn't work either but when opening only one file into PScs3 will it cooperate until opening a second. I'm not sure if the plug-in is what caused the problem but I do know everything from there seems hectic. Every crash leads me opening PScs3 again with all of its settings reset from when I first exited normally.
Plugin Used:
Photoshop_Plugins_8.23.1101.1715
Appications Type; 4,317 KB
Company - InstallShield Softwere Corporation
Have you tried uninstalling and reinstalling the program?
Unfortunetly yes I have attempted this and the problem still occurs towards cs3. This makes me fear that the entire program is glitched.
Do you have any other plug-ins installed?
I've checked and there are no other plug-ins attatched.
This is my last option before seeing to reformat my computer. If there is any input about the topic, now is the time.

Just a hunch: change your default printer to something else (a locally attached printer, not networked) or "PrintToPDF", then relaunch Photoshop and try again.
It could also be a plugin (try disabling ALL third party plugins).
And it could be a bad OS install, a virus, etc. It may take a while to find.

My 64Bit Adobe CS6 hangs when loading a file

My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

4.2.3/.4 Data load wizard - slow when loading large files

Hi,
I am using the data load wizard to load csv files into an existing table. It works fine with small files up to a few thousand rows. When loading 20k rows or more the loading process becomes very slow. The table has a single numeric column for primary key.
The primary key is declared at "shared components" -> logic -> "data load tables" and is recognized as "pk(number)" with "case sensitve" set to "No".
While loading data, these configuration leads to the execution of the following query for each row:
select 1 from "KLAUS"."PD_IF_CSV_ROW" where upper("PK") = upper(:uk_1)
which can be found in the v$sql view while loading.
It makes the loading process slow, because of the upper function no index can be used.
It seems that the setting of "case sensitive" is not evaluated.
Dropping the numeric index for the primary key and using a function based index does not help.
Explain plan shows an implicit "to_char" conversion:
UPPER(TO_CHAR(PK)=UPPER(:UK_1)
This is missing in the query but maybe it is necessary for the function based index to work.
Please provide a solution or workaround for the data load wizard to work with large files in an acceptable amount of time.
Best regards
Klaus

Nevertheless, a bulk loading process is what I really like to have as part of the wizard.
If all of the CSV files are identical:
use the Excel2Collection plugin ( - Process Type Plugin - EXCEL2COLLECTIONS )
create a VIEW on the collection (makes it easier elsewhere)
create a procedure (in a Package) to bulk process it.
The most important thing is to have, somewhere in the Package (ie your code that is not part of APEX), information that clearly states which columns in the Collection map to which columns in the table, view, and the variables (APEX_APPLICATION.g_fxx()) used for Tabular Forms.
MK

Error 1 when loading flat file in BW 7.0

Hi,
The flat file structure is same as the transfer structure. Its a csv file and i also checked about the delimiters and stuff.The flat is not open and it is closed while i am loading it. The same file gets loaded if i try in another laptop with my id.If i use my colleague's id on my system also...it doest work...so, the basic problem is with my laptop. I know its nor related to type of data or transfer structure. Its some settings on my laptop which got changed automatically. If i install some other softwares like mozilla firefox or yahoo msg-will that create a problem? I am not at all understanding why its like this. Please help.The error msgs i get when i try to load the flat file -
Error 1 when loading external data
Diagnosis
Error number 1 occurred when loading external data:
1. Error when reading the file (access rights, file name, ...)
2. File size or number of records does not correspond to the data in the control file
3. Error when generating the IDoc
4. File contains invalid data (errors with an arithmetic operation or data conversion)
Procedure
Check whether you have the required access rights and whether the data in the control file is correct (file names, record length, number of records, ...). Correct the data in the control file if necessary and check the data file for invalid data (values of the wrong type, values in the wrong format for conversion exit,...). Check whether the file has headers that have not been specified.
Error when opening the data file C:\vikki1.csv (origin C)
Message no.
Diagnosis
File C:\ vikki1.csv (origin C) could not be opened.
Origin:
A : Application server
C : Client workstation
Procedure
Check whether the file entered exists and is not been used by other applications.

Hi! Vikki,
Error 1 means your flat file is open while uploading the data..
your flat file should be closed while uploading data in BW.
that is why it is saying "Error when opening the file..".
first close that file n then upload..it will work.
rest of the things are ok!..
I hope this will help you.
Regards,
khyati.

Error handling when loading flate files

Hi
We have a Process Chain loading flate files from a server into a ODS. We want to create a routine to avoid errors in the ODS when no files is found.
The error we want to handle is
Error 1 when loading external data
Message no. RSAR234
We want to handle this error message as OK to avoid red request in the ODS
Please help
Kind regards
Ola Einar Langen

Hi, and thanks for your hints.
We ended up with the following codes. It's will mark the prosess chain red (but this is as wanted) but we have implemented that the prosess chain will proceed even with error in the loading process
The code for the routine implemented in the infopackage in "External data" tab.
p_filename = 'filename.txt.
OPEN DATASET p_filename FOR INPUT IN BINARY MODE.
If file could not be open
IF SY-SUBRC NE 0.
p_subrc = SY-SUBRC.
delete the current request
CALL FUNCTION 'RSSM_DELETE_REQUEST'.
ENDIF.
close the file if OK
CLOSE DATASET p_filename.
p_subrc = 0.
The solution is no OK for us
Kind regards
Ola Einar Langen

Error when loading security file .sec

Hi
I am getting error when tried to load security file
Below is extract of security file
!FILE_FORMAT=2.0
!VERSION=11.12
!USERS_AND_GROUPS
Praveen@Native Directory
admin@Native Directory
!SECURITY_CLASSES
[Default]
123
!ROLE_ACCESS
Provisioning Manager;Praveen@Native Directory
Journals Administrator;Praveen@Native Directory
Advanced User;Praveen@Native Directory
Data Form Write Back from Excel;Praveen@Native Directory
Inter-Company Transaction Admin;Praveen@Native Directory
Provisioning Manager;admin@Native Directory
Application Administrator;admin@Native Directory
!SECURITY_CLASS_ACCESS
123;Praveen@Native Directory;All;N
i want to add a user and wan to give provision in the above security file .sec (without doing it in Sharedservices )
for the above security file i have added balaji and loaded it to HFM its not working.
!FILE_FORMAT=2.0
!VERSION=11.12
!USERS_AND_GROUPS
Praveen@Native Directory
balaji@Native Directory
admin@Native Directory
!SECURITY_CLASSES
[Default]
123
!ROLE_ACCESS
Provisioning Manager;Praveen@Native Directory
Journals Administrator;Praveen@Native Directory
Advanced User;Praveen@Native Directory
Data Form Write Back from Excel;Praveen@Native Directory
Inter-Company Transaction Admin;Praveen@Native Directory
Provisioning Manager;balaji@Native Directory
Journals Administrator;balaji@Native Directory
Advanced User;balaji@Native Directory
Data Form Write Back from Excel;balaji@Native Directory
Inter-Company Transaction Admin;balaji@Native Directory
Provisioning Manager;admin@Native Directory
Application Administrator;admin@Native Directory
!SECURITY_CLASS_ACCESS
123;Praveen@Native Directory;All;N
123;balaji@Native Directory;All;N
Can we add users and give provision in security file without creating user in shared services ?
Thanks

If you have your application built using MSAD, then you an load the file the way you built it above, however because you're using the NativeDirectory, you need to create the user in the Directory(HSS) first. Once the user is created, you can then go through and use the .sec method to assign access/roles, but the actual user creation can't be done through a load file.
One of the easiest reasons to understand why this can't be done is that when you load the .sec file, you're not setting up a password for the user.

FCP stops responding when exporting quicktime file

When exporting a quicktime file FCP 5 stop responding about 50% to 60% into the file.
Have all the latest updates:
In the middle of setting up for a DVD.
Total media lenght is 01:58:30
Thats why I'm segmenting it in to chapters so each file is smaller, average 10:00 to 15:00 minutes each.
Any help is appreciated in advance, Thanks
Power Mac G5 Dual 2 GIG Mac OS X (10.4.6)

When exporting a quicktime file FCP 5 stop responding
about 50% to 60% into the file.
Have all the latest updates:
In the middle of setting up for a DVD.
Total media lenght is 01:58:30
Thats why I'm segmenting it in to chapters so each
file is smaller, average 10:00 to 15:00 minutes
each.
Any help is appreciated in advance,
Thanks
Power Mac G5 Dual
2 GIG Mac OS X (10.4.6)
writing the file to external direwire 800 drive as normal. In a folder I made for export. That when finished will be imported into Imovie for DVD export.
Power Mac G5 Dual 2 GIG Mac OS X (10.4.6)
Power Mac G5 Dual 2 GIG Mac OS X (10.4.6)
Power Mac G5 Dual 2 GIG Mac OS X (10.4.6)

Problem when loading xml file using sql loader

I am trying to load data into table test_xml (xmldata XMLType)
i have an xml file and i want whole file to be loaded into a single column
when i use the following control file and executed from command prompt as follows
sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl direct=true;:
LOAD DATA
INFILE *
TRUNCATE INTO TABLE test_xml
xmltype(xmldata)
FIELDS
ext_fname filler char(100),
xmldata LOBFILE (ext_fname) TERMINATED BY EOF
BEGIN DATA
/u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml
the file is being loaded into table perfectly.
unfortunatley i cant hardcode file name as file name will be changed dynamically.
so i removed the block
BEGIN DATA
/u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml
from control file and tried to execute by giving file path from command line as follows
sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl data=/u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml direct=true;
but strangely it's trying to load each line of xml file into table instead of whole file
Please find the log of the program with error
Loading of XML through SQL*Loader Starts
SQL*Loader-502: unable to open data file '<?xml version="1.0"?>' for field XMLDATA table TEST_XML
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
SQL*Loader-502: unable to open data file '<Root>' for field XMLDATA table TEST_XML
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
SQL*Loader-502: unable to open data file '<Type>Forms</Type>' for field XMLDATA table TEST_XML
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
SQL*Loader-502: unable to open data file '</ScriptFileType>' for field XMLDATA table TEST_XML
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
SQL*Loader-502: unable to open data file '<Type>PLL</Type>' for field XMLDATA table TEST_XML
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
SQL*Loader-502: unable to open data file '</ScriptFileType>' for field XMLDATA table TEST_XML
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
please help me how can i load full xml into single column using command line without hardcoding in control file
Edited by: 907010 on Jan 10, 2012 2:24 AM

but strangely it's trying to load each line of xml file into table instead of whole fileNothing strange, the data parameter specifies the file containing the data to load.
If you use the XML filename here, the control file will try to interpret each line of the XML as being separate file paths.
The traditional approach to this is to have the filename stored in another file, say filelist.txt and use, for example :
echo "/u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml" > filelist.txt
sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl data=filelist.txt direct=true;

HFM APP error when loading security file

Good Day, I am getting this error whenloading security file in HFM APP. User not found with identity=native://DN=cn=0a3b0f123e6a9b46:1f9eca5f:10f110fd853:-7d24,ou=People,dc=css,dc=hyperion,dc=com?USER File: Version: 9.2.0.0.1077 Line:-1 Error: (-2147216700)(0x800412C4)(User not found with identity =native://DN=cn=0a3b0f123e6a9b46:1f9eca5f:10f110fd853:-7d24,ou=People,dc=css,dc=hyperion,dc=com?USER)File: CHsxDSSecurity.cpp Version: 9.2.0.0.1077 Line: 6859 Error:(-2147216700)(0x800412C4)() File: CHsxSecurity.cpp Version:9.2.0.0.1077 Line: 2307 Error: (-2147216700)(0x800412C4)() File:CHsvSecurityAccess.cpp Version: 9.2.0.0.1077 Line: 3980 Error:(-2147216700)(0x800412C4)() File: CHsvSecurityLoadACM.cpp Version:9.2.0.0.1077 Line: 2864 Error: (-2147216700)(0x800412C4)() File:CHsvSecurityLoadACM.cpp Version: 9.2.0.0.1077 Line: 535 Error:(-2147216700)(0x800412C4)() Anyone seen this before. Thanks Azmat Bhatti

If you have your application built using MSAD, then you an load the file the way you built it above, however because you're using the NativeDirectory, you need to create the user in the Directory(HSS) first. Once the user is created, you can then go through and use the .sec method to assign access/roles, but the actual user creation can't be done through a load file.
One of the easiest reasons to understand why this can't be done is that when you load the .sec file, you're not setting up a password for the user.

Problem when loading pdf files from Shared Content

When I load pdf files from Shared Content, I got the following problem: "The selected document could not be retrieved, please try uploading the document again."
Anyone knows this?
Thank you very much in advanced.

I don't migrated the program, but installed it from the original installer,
i. e. I first installed Indesign from backup, and then uninstalled it and
reinstall clean from Adobe.
What a plug-in or utility converts page from InDesign to PDF?
2014-08-10 22:51 GMT+04:00 Peter Spier <[email protected]>:
problem with exporting PDF files from InDesign CS5 created by Peter
Spier <https://forums.adobe.com/people/P+Spier> in InDesign - View the
full discussion <https://forums.adobe.com/message/6627440#6627440>

Digital Media Designer Issue when loading a file?

Hi I'm experiencing an issue when I try to bring a media asset to my layout. After I loaded the file to the library I go to the Designer to create a presentation then I click on the icon "Media" beside Enterprise TV icon in order to add one of the assets from the library but it does not allow me to select the file. I could select the file from the icon Playlist.
I wonder if this is not the correct porcess.
I have to say that I just upgraded to 5.2 and I am not familiar to all the features and options.
I attached a screen shot from that window.
Thanks

Hi Tomas,
Yes it "works" that's what I did instead but doesn't seem to be the best practice because when I run the video in the display it show a little cut after it restarts. And also, i think it's better to use Media instead of Playlist when you want to publish images, because I noticed that the "effects" it has does not look nice at all and the images playlist looks much better and smooth when you add them as Media and assign a duration.
Anything else to get this working properly, I have tested it at my local Cisco's office and it worked fine now I upgraded my DMS to 5.2 and I am facing this issue, therefore I wonder if it is a bug or might be an installation issue or smething else related with configuration.
Thanks!

Quality reduction when using QuickTime file

I imported a high quality QuickTime file to my FCP timeline, and the QT file's appearance -- both on the timeline and on the subsequent export of an mpg file -- degraded substantially. Smooth-edged circles became jagged. Sharp text became soft. The original QuickTime file looks marvelous, but when placed on FCP, it looks terrible. Anybody know why?

it all depends on your sequence settings? what are they? what is your original footage from? web? DVD? tape? if tape what kind? also what version of FCP are you using? am i reading your message right, you are outputting as MPEG-2?

FCP Stops responding when exporting quicktime file still

FCP Fresh install and FCP Still fails to export quicktime file, stops responding.
I'm in the middle of a project, that really needs to be finished ASAP. Anyone out there have a solution to fix this problem, will be appreciated more than can be said.
Power Mac G5 Dual 2 GIG Mac OS X (10.4.6)

You know Lloyd, if this is a second thread about an old problem, you are really better off in the original thread. It allows us to follow along with the problem at hand, what has been suggested and what you have tried so far and the results.
Just off the top of my head and without searching for the original thread (I'm too lazy today,) I'm guessing you might have a corrupted file or render file.
Does it always stop at the same place? Where is your media stored? to where are you exporting? How much ram do you have?
Here we go, starting all over again...

BW - Using up memory when loading full files

Each night we have a number of jobs which load our data into BW. Most of the loads as full data loads, and therefore the system should wipe out the data that was there previously. However it seems to be keeping the information in the database. Not duplicating the ifnormation but using up the memory. I think we may have had a program which used to delete this out. Anyone any idea what this would be?
We are on old version 2.1C

Wendy,
It is more of a maintenance task. COuple of things you can do.
1. If you load data to targets also loading them thru PSA, after the load you can delete the PSA, say 'xxx' days old data be deleted from PSA. This will improve performance.
2. When loading a full load via a single info package to multiple targets at the same time, this load will create memeory bottle necks, you could avoid this by using a staging area, such as load to a DSO and from there load into further targets using individual info packages. Though the data same amount of data is in the memeory it handles and performs better.
3. Where possible try to use 'Delta' if youe extractor supports it.
Hope this helps, award points if useful.
Alex(Arthur Samson)

Trouble when loading quicktime files

Similar Messages

Maybe you are looking for