Trouble with 1080p on MacOS but no Windows

the maximum I can get out of my intel 20" iMAC with MacOS is 720p. I get some flickering at 1080p. The 59.9HZ option is greyed out and only 60HZ can be used. (incidentally this used to happen with old powermac which had an ATI 9800 and it would flicker with 60 but not 59.9 so 59.9 seems like the right choice).
In Windows, via boot camp, I am able to drive a 1080p signal just fine although apparently at 60HZ.
So, this seems like a driver issue with respect to the ATI card. Anyone else noticed this, or have any ideas?
Thanks
-V

Which version of the ATI card are you using? 128MB or 256MB?
Keep in mind that OS X is much more graphics intensive than Windows XP. OS X will push the limits of your graphics card sooner than Windows. Maybe that is why you are getting the flicker?

Similar Messages

  • I'm having trouble with my iPhone 4, but on the black screen with the I tune music circle with the charger below it. I just don't get it after I plugged to the computer and it's not working :.(

    I'm having trouble with my iPhone 4, but on the black screen with the I tune music circle with the charger below it. I just don't get it after I plugged to the computer and it's not working :.(

    The screen is telling you to connect the iPod to your computer and restore via iTunes
    iTunes: Restoring iOS software
    BTW, this is the iPod touch forum

  • I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

    I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

    MacBook Pro
    MacBook Pro Apple Support
    Apple Support Lion
    Lion Mac OS X Communities

  • Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.

    Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.  Can you tell me why Photo Stream will not stay enabled.  When I reboot, it will disable not to mention that it will not get any pushed photos.  Is there a 64 bit version?

    Hello tw_mama,
    I was looking into the issue you are experiencing and found an article that may shed some light on the subject. It's called iCloud: Account troubleshooting found here: http://support.apple.com/kb/TS3988
    This section in particluar:
    I get an "Unsupported Apple ID" error when I try to sign in to iCloud from my iPhone, iPad or iPod touch.
    Depending on how you created your Apple ID, you may not be able to create an iCloud account with your current Apple ID. If your Apple ID works in the iTunes Store, App Store, Game Center, FaceTime, or with other Apple Services, your Apple ID should work for iCloud. Also, if you created your Apple ID while you applied for a job at jobs.apple.com, your Apple ID should work for iCloud. If you cannot use your Apple ID with any Apple Services, it might not be compatible with iCloud. Contact iCloud Support for assistance.
    All the best,
    Sterling

  • Having trouble with making new internet tabs and windows

    When I open a new tab or new window, some small blank black windows appear and disappear right away. I have tried running virus scans, uninstalling unnecessary programs and deleting memory but they still pop up. Also after the blank windows disappear, there is a "not responding" after the blank windows disappear, for about 10 seconds and then resumes normal

    Well first, the version of Firefox you are running is EXTREMELY old and insecure. Please update to Firefox 11 right away. [[Updating Firefox]] can help you with that.
    After doing that, if you are still having issues, Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
    A few other basic trouble shooting things you can try is this:
    Run all Windows Updates, install all needed service packs, etc.
    Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.

  • Trouble with PDF files in Safari for Windows

    I downloaded Safari for Windows at work on my XP machine because I much prefer the Safari interface. The problem that I am having is that one of the web-based programs that I use at work does reports in PDF format and when I click on the link for a report Safari is popping up a window that says the document doesn't exist. Of course, the document does exist and my Internet Explorer and Safari for Mac that I have at home both view these reports with no problems through Safari. I have the most up to date version of Adobe Reader 8, and when I check the installed plugins through the help menu on Safari it shows that the Adobe plugin is installed. So, I have no clue how to get this to work, but if I can't get it fixed soon I'm gonna have to switch back to Internet Explorer (which I don't want to do). Can anyone help???

    Try to uninstall and after that install Acrobat Reader 8 again.

  • Trouble with newer versions of Firefox on Windows XP

    Long time Firefox user but started having problems a few updates ago. Uninstalled 8.0 and reinstalled newest version. Have not added any plugins/add-ons with install yet list below shows many (some unrecognizable (did not save any old settings with uninstall). New 9.0.1 does not look like new interface should...looks like an older one. Did not reload old bookmarks but new install will not bookmark anything. Some extensions did not work properly with old 8.0 version. Is this an XP problem with the newer Firefox versions and if so should I go back to an older version (which one)? Don't want to move to Chrome and will not use IE but Firefox is bricked without bookmarks and other problems. Help?

    There is a discussion group for Boot Camp. Search in that group for answers, this has been covered before.
    Remember you are not only using beta software you are using it to install Windows.
    Before heading off in a great search in the Boot Camp discussions... Be absolutely certain that you have WinXP (Pro or Home) with Service Pack 2 (SP2) installed. While in WinXP right click on "My Computer" and select "Properties", it will tell you if this is true.
    Some folks have resorted to unpacking the driver file & installing each one at a time. The drivers can be unpacked using a command line switch. I don't remember the exact syntax - but a quick search in the Boot Camp discussion group should bring you the answer.
    Good luck! And remember... BACK UP your OSX data!
    Steve

  • Trouble with mac drivers installing correctly on windows xp on macbook

    i just got my new macbook and have figured out how to get boot camp and got a version of windows xp.
    everything successfully installed except what seems to be the most important part. when my mac osx driver cd comes to one of the last steps where it says its "registering" something. then the box comes up where it gives me the choice of the recomended STOP instalation or to continue the instalation. i chose cotinue instalation as intructed in the bootcamp set up guide and the same choice box appears again. after i choose to continue for the second time a fatal error message occurs and says that nothing really got installed.
    If anybody could help me out at all with this is would be greatly appreciated.
    thanks in advance for any and all advice!

    There is a discussion group for Boot Camp. Search in that group for answers, this has been covered before.
    Remember you are not only using beta software you are using it to install Windows.
    Before heading off in a great search in the Boot Camp discussions... Be absolutely certain that you have WinXP (Pro or Home) with Service Pack 2 (SP2) installed. While in WinXP right click on "My Computer" and select "Properties", it will tell you if this is true.
    Some folks have resorted to unpacking the driver file & installing each one at a time. The drivers can be unpacked using a command line switch. I don't remember the exact syntax - but a quick search in the Boot Camp discussion group should bring you the answer.
    Good luck! And remember... BACK UP your OSX data!
    Steve

  • Trouble with logging off and back on, Windows XP

    This doesn't quite seem to go here, but none of the sub forums seemed really appropriate.
    I've had Windows XP installed on my Macbook for about a month now. I recently noticed that if I log off my user account, my computer will freeze up as it tries logging back in.
    If I put the computer to sleep, it will log back in fine; it only seems to occur if I go Start>Log Off
    Any ideas what the issue is?
    ~Lyssa

    There is a discussion group for Boot Camp. Search in that group for answers, this has been covered before.
    Remember you are not only using beta software you are using it to install Windows.
    Before heading off in a great search in the Boot Camp discussions... Be absolutely certain that you have WinXP (Pro or Home) with Service Pack 2 (SP2) installed. While in WinXP right click on "My Computer" and select "Properties", it will tell you if this is true.
    Some folks have resorted to unpacking the driver file & installing each one at a time. The drivers can be unpacked using a command line switch. I don't remember the exact syntax - but a quick search in the Boot Camp discussion group should bring you the answer.
    Good luck! And remember... BACK UP your OSX data!
    Steve

  • Trouble with second+ lunching Photoshop CS5 under Windows XP 32-bit

    I install trial version of Master Collection CS5. All right. Start the Photoshop CS5 Extended, change preferences and restart it. After second lunch of program, see critical error.
    I try reset settings, without result. After full reinstall of Master Collection, Photoshop start normally again, and after restart program, without changing setings in this time, error showing again.
    Window XP 32-bit SP3
    2,4 Ghz Intel Core 2 Duo
    2 Gb DDR2
    Radeon 1950 Pro 512Mb
    Don't understand where can be problem with it.
    Thanks.

    Yes, i tried enable and disable firewall, i Administrator. I install Master Collection without After Effects and Premier, also Contibute and OnLocation. I used default path on system drive C:/
    I think PS somthinka create after first lunch, somthing with conflict in my progrmas or DLLs. But what it may be.
    P.S. Also i tried fully reinstall Visual C++ 2005 and 2008. Someone write about this solution on a forums.

  • I was having trouble with flash causing hangs but i have had firefox 5 for 5 minutes or less and it has already hung three times for no apparent reason - this is not an improvement - google chrome beckons

    Windows 7, pretty new machine, regular checkes with AVG (daily) and malwarebytes (every 3 days), put firefox 5 on today - looked at the websites of three british newspapers, the bbc, facebook, three hangs in 5 minutes, restarted each time

    please try to uninstall the adobe flash plugin from the windows control panel. afterwards manually delete any leftover files in ''C:\Windows\SysWOW64\Macromed\Flash'' and download & install the plugin again (uncheck the option to install the bundled security software): www.adobe.com/go/getflashplayer

  • Downloaded ios5 to my iPad, had trouble with all my apps but that got fixed.  now the whole thing is so slow it is almost useless.  have rebooted, didn't help

    i downloaded ios5 to my ipad.  Initially had problem with apps which was fixed by downloading an upgrade and they all staarted working.  But everything is so slow it is almost useless. i have tried rebooting, it didn't help.

    Other users have reported this very same issue after updating their iPads. You are using the original iPad according to your profile and those devices seem to be the more adversely affected devices. You can try the basic things and see if any of this helps.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If none of those things help, you can always try restoring your iPad. I have restored mine with some success, but I still have issues that I hope will be resolved soon.
    An update to the iOS has been announced and it is in Beta now. Hopefully it will be released to all users soon.

  • I am having trouble with rendereing my project using a windows computer

    Whenever I try to render my project as I make changes or add new clips and hit the render button it will close the program and say there was an error.  Any ideas??

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    •Are you using an account with Administrator Privileges?
    Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Which version of Quicktime do you have installed?
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    IF you have version 10 and nVidia
    nVidia Driver Rollback PreElements-10 http://forums.adobe.com/thread/1317675
    -Old Drivers http://www.nvidia.com/Download/Find.aspx?lang=en-us

  • I am having trouble with iTunes for both my computers windows xp and 7.

    Both accounts are able to be logged in but I can't view anything on the itunes store. I have used the itunes loaded on xp before. The windows 7 itunes 'progress line' stops half way. On one occasion I saw a html text version of the itunes store but it wasn't functional. Any suggestions?

    Try this,
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    Now launch your iTunes and see if it is working now.

  • I am having trouble with my flash player on my windows surface rt

    My flash player was working and I was able to go to the websites and now it will not work.  It says to update it and we have tried everything that it has told us to do and it still is not working.  My husband need it for his homework and my daughter plays a few games on it as well.  Mary

    http://forums.adobe.com/thread/1195540

Maybe you are looking for

  • PhotoShop CS 5 Raw

    Has anyone noticed the drop down menu under Targeted Adjustment Menu and Crop tool don't drop down and the box bracket to expand and contract brush size don't work. And if anyone else is seeing this and how do you contact Adobe directly to mention th

  • Hello, i have a problem to install Photoshop Cs6.

    When i introduce the serial number the programe indicates that it didd't work and i don't know why it happened.

  • HP Deskjet C5280 doesn't print colors on Imac with Yosemite

    For years i use the HP Photosmart C5280 all-in-one on a windows laptop. Now i have a new imac 27inch late 2013 with Yosemite . The printer is working also verry fast bit only i can print black i can't select colours. The printer cartridges are full e

  • GUI swing class help needed

    hi, i just need some help to create a bar kind of object (like a bar of battery shown in mobile phones). the information i have is in percentage from 0-100%. and what i have planned is that: the bar will be split into four: from 0-25: one bar will be

  • Accounting Entries in Project Asset Capitalization Process

    Hello Dina, Can you explain the accounting entries for capital projects for the scenario mentioned in the below points ? 1. A a project related supplier invoice is created for a capital project. It is validated, accounted and entries are transferred